All these boards are 8-channel, and all of them are 24/48V. This is why the PSE-8 has dual DC jacks.

PSE-8 means is meant for an 8-port switch, as you said, the CRS112-8P-4S. It has dual DC jacks that line up with the back of the case. PSE-24 is for the 24-port CRS328-24P-4S, without the DC jacks, but with an internal 4-pin connector instead. The 24-port switch uses 3 of these boards. I'm fairly ce...

i try to repair this board. my board is from netpower 16P, only one port (port5) have problem cause lightning. In winbox there's message about overload voltage to this port. I find out theres short a diode and a resistor was burn on top side pcb, On bottom pcb there's a Ic was burn. Some digging ge...

Mikrotik sales told me that they don't sell these boards individually

Hey folks, Is it possible to buy PSE-8 or PSE-24 boards for PoE switches separately? We have several switches that have various power problems on random ports due to surges, etc.. I was able to repair a couple by replacing the PSE boards from donor switches, but would like to just get some new ones....

Brand new hAP AC3 router batch. Tried with 6.47.8 as well as 6.48.2.. Quick Set does not save 5GHz radio parameters when "Home AP Dual" mode is selected. When I try to change network name, frequency or band, they just revert to previous settings. I am able to manually change these paramete...

Will the webfig skin issue be addressed soon? I'm unable to select skins on a hAP ac3. I can create them in webfig skin editor, and the file gets saved under the skins/ folder, but the new skin is not selectable under user group properties or skin editor. Default is still the only option. Any hints?...

Having the same issue with a hAP ac3. I can create the skin using webfig in design mode, and it saves it under the skins/ folder, but I cannot select it afterwards in either the skin editor or group settings. Default is the only option.


So far I've tried several versions from 6.46.8 to 7.1beta2.

The whole point is to be able to use quickset so these routers could still be used as CPEs, and we wouldn't have to talk customers through changing settings through webfig or winbox. This can be resolved in seconds instead of weeks. And won't cost you or Mikrotik a penny :) Separate ether10 from swi...

Hello folks. This has been asked before, but for different reasons... Is it possible to change the interface that QuickSet treats as the WAN interface? My main reason is that we have several dozen of Mikrotik CPE routers that were cycled out of service due to damaged WAN ports (physical damage or li...

6.37rc10.. "Remove Resolved" still doesn't seem to work on the device's Outages tab, however, the button under Services/Outages does work.
Any suggestions?

thanks!

@stereomind

* Upgrade to rc37.
* Try importing that db backup file again.
* If import fails, generate supout file and send it to support@mikrotik.com

We will check what problems server has with this db.

Thank you, that worked.

I'm running into the same problem with 6.36rc36. I even tried emptying all the tables except for objs and VACUUMing, and it still rotates the "applying settings: enabling: reading db object #..." 

Backup db is from 4.0b3. 

Can we have a sms/email alert for agent probe? So we will receive on our smartphone alerts if any equipment goes down. You can already do that. Create a notification with type "email", and fill in the blanks. For SMS, you can send email to your provider's email to SMS gateway. You can ena...

Hello,

Is it possible to make QuickSet user a different WAN port, other than ether1?
We have quite a few routers that are out of warranty, and have dead WAN ports, but work fine otherwise. I can manually program them to work with ether2 as a WAN port, but QuickSet doesn't recognize that.

Thanks!

Hello folks. Is it possible to provision new CPE routerboards using netinstall/flashfig and upload a custom webfig skin at the same time? I figured out how to provision the configuration part, but don't see how files can be transferred easily without having to log into the router after flashfig. I g...

I mostly do Ping probes. rarely cpu-proces or other snmp-related stuff. no windows-probing at all. but I do bandwidth graphing. on most of my links. maybe this causes the version 4 dude to leak memory? We maintain bandwidth graphs for close to 300 devices on our network without any problems. We do ...

@sup5 I would say that one or some of your probes have memory leaks, I have been running 4.3 since it became available and never have lockups. Quite a while ago someone found that memory leaks were caused by monitoring windows servers. I have not seen it but I monitor very few servers and I don't i...

Hello forum. I feel like I'm beating a thoroughly dead horse here, but I'm curious as to the future (and the current stagnant state) of The Dude. Is it considered "good enough" and therefore will no longer be developed? Is the development limited because it's not a money maker, comparing t...

Hey folks. I'm trying to figure out a way to gather outage information remotely from Dude, sort of like an API call.
The goal is to poll selected devices (from web server to Dude) and put up a message on our web site when they go down.
Is this possible?

Thanks!

Like a couple of people mentioned above, it would be nice to have the Outages link back in the Contents pane, as well as a quick "remove resolved" button like in the previous versions. Another thing that would be absolutely awesome is the ability to chart packet rates (Interface.InUnicastP...

Checking it out... Looks nice so far!

Hello -
I'm running v3.4.

Is it possible to propagate the up/down status of a submap to a parent map?

Thanks!

you can also use proxy-arp feature if your ISP cannot provide a /30 for you. IIRC if you enable proxy-arp on the public (?) interface, it will allow you to assign your public remote addresses on pppoe sessions (via framed-ip-address or framed-pool or ppp secrets). It's not the "Right Way" ...