Which wireless card are you using in each laptop?
*) dhcpv6-server - allow to add DHCPv6 server with pool that does not exist;
http://www.mikrotik.com.my/reinstalling ... rial-port/Can you tell me where I find the procedure?
You can install a previous version of RouterOS using the Netinstall.I made a hard reset after login error, right now with version 3.14rc1 I still receive user or password error. What should I do?
Isn't a typo, were launched two versions today.Is the version a typo? My systems find 6.42rc49.
/ipv6 export hide-sensitive verbose
Same here.MAC discovery would only work though if I had a gateway set on the interface [...]
It's like the 2ghz-g/n, where is disabled the 802.11b.2. What will be the difference between "band=5ghz-a/n/ac" and "5ghz-n/ac"? Some kind of old compatible mode on the first one that will be disabled on the second and therefore results in higher performance?
Android energy saving, to me is the same, except to 802.11ac which is around of 97~433 Mbps.There is no way to change it - All android smartphones with 802 N use only RX Rate 54 Mbps and I don't know why???
Page 42.What is this?
Yes, the below methods.Currently RouterOS6.40rc does support any of EAP authentication methods?
https://wiki.mikrotik.com/wiki/Manual:MetarouterCurrently MetaRouter can be used on:
RB400, RB700 series except models with SPI flash, RB900 series except models with SPI flash, RB2011 boards
/lcd set enable=no /lcd set touch-screen=disabled
Fixed image link.v3.11 doesn`t have code signing certificate.
http://drive.google.com/open?id=0BwXRNm ... Dl6NTZfOGc
For priority 1 and 2, 10M in both fields.so if my speed is 5mb download and .90 upload what should be the values there?
should i put a value on the limit at part for target upload and download?
/ip neighbor discovery set discover=no numbers=0,1
$ WINEARCH=win32 winecfg $ pacman -Qs wine local/wine 2.7-1
but what would be the benefit of making my modem bridge and making the PPPoe connection from MT?
The winbox works fine with discovery. I don't have problems with that and running in wine 2.6-1 on Arch Linux.Until now it's not published but we hope to do this because with wine
The winbox dont work for layer 2 discovery
Apply the firewall rule on wAP.I add this rule into the wAP or HEX?..
/ipv6 address add from-pool=Poolv6 interface=LAN advertise=yes eui-64=no address=::1/64
/interface wireless set preamble-mode=long numbers=0,1
You should do an DMZ ( https://wiki.mikrotik.com/wiki/Manual:I ... nation_NAT ), a NAT forward all ports or some needed.I would like two join these two internet connection to the LAN and need to set the static IP in one of the computer i have.
Also, was solved the problem after close the winbox, which left a dead process running on the Arch Linux using wine 2.0rc6-1 or wine 2.0rc5-1.No "disconnect/close"-issue on MacOS with wine-1.9.23 or wine-2.0-rc6