Use NetInstall to flash hAP Mini.any hint on how to flash this on a HAP MINI?
thanks in advance
*) dhcpv6-server - allow to add DHCPv6 server with pool that does not exist;
http://www.mikrotik.com.my/reinstalling ... rial-port/Can you tell me where I find the procedure?
You can install a previous version of RouterOS using the Netinstall.I made a hard reset after login error, right now with version 3.14rc1 I still receive user or password error. What should I do?
WINEARCH=win32 winecfg
Isn't a typo, were launched two versions today.Is the version a typo? My systems find 6.42rc49.
/ipv6 export hide-sensitive verbose
Same here.MAC discovery would only work though if I had a gateway set on the interface [...]
/ipv6 nd export verbose
/ipv6 nd prefix default set valid-lifetime=2d preferred-lifetime=2d
It's like the 2ghz-g/n, where is disabled the 802.11b.2. What will be the difference between "band=5ghz-a/n/ac" and "5ghz-n/ac"? Some kind of old compatible mode on the first one that will be disabled on the second and therefore results in higher performance?
Android energy saving, to me is the same, except to 802.11ac which is around of 97~433 Mbps.There is no way to change it - All android smartphones with 802 N use only RX Rate 54 Mbps and I don't know why???
Yes, the below methods.Currently RouterOS6.40rc does support any of EAP authentication methods?
https://wiki.mikrotik.com/wiki/Manual:MetarouterCurrently MetaRouter can be used on:
RB400, RB700 series except models with SPI flash, RB900 series except models with SPI flash, RB2011 boards
/lcd set enable=no
/lcd set touch-screen=disabled
Fixed image link.v3.11 doesn`t have code signing certificate.
http://drive.google.com/open?id=0BwXRNm ... Dl6NTZfOGc
For priority 1 and 2, 10M in both fields.so if my speed is 5mb download and .90 upload what should be the values there?
Yes.question guys
should i put a value on the limit at part for target upload and download?
/ip neighbor discovery
set discover=no numbers=0,1
$ WINEARCH=win32 winecfg
$ pacman -Qs wine
local/wine 2.7-1
but what would be the benefit of making my modem bridge and making the PPPoe connection from MT?
The winbox works fine with discovery. I don't have problems with that and running in wine 2.6-1 on Arch Linux.Until now it's not published but we hope to do this because with wine
The winbox dont work for layer 2 discovery
24*0.8i always use the official power supply for rb951.
how did you calculate 19w ?
thanx
Apply the firewall rule on wAP.I add this rule into the wAP or HEX?..
/ipv6 address add from-pool=Poolv6 interface=LAN advertise=yes eui-64=no address=::1/64
/interface wireless
set preamble-mode=long numbers=0,1
/export hide-sensitive
You should do an DMZ ( https://wiki.mikrotik.com/wiki/Manual:I ... nation_NAT ), a NAT forward all ports or some needed.I would like two join these two internet connection to the LAN and need to set the static IP in one of the computer i have.
This page was last modified on 22 June 2016, at 09:37.
Also, was solved the problem after close the winbox, which left a dead process running on the Arch Linux using wine 2.0rc6-1 or wine 2.0rc5-1.No "disconnect/close"-issue on MacOS with wine-1.9.23 or wine-2.0-rc6
Good work!