I use always the same ROS version for all devices.In this case the latest beta version for both!...
JohnTRIVOLTA, do you mean that your AX3 on the latest beta ROS or did you upgrade your cAP AC to the v7 ROS?
...
Projects that have been abandoned by mikrotik, such as vpn tunnel crypto keys, etc.....
By the way, what is a smart cart used for in a ccr?
You wrote that the model is RBGroove52HPn, not RBGrooveA-52HPn/r2/!NO, Its License level is 4 due to this page:Аnd one more thing, the groove have a level 3 license - no AP Bridge mode.
https://mikrotik.com/product/RBGrooveA-52HPnr2
/interface wifi channel
add frequency=2412,2432,2472 name=ch-2ghz width=20mhz
/interface wifi channel
add frequency=2412 name=ch-2ghz
It works for me. Try to choose the interface?If you add this rule, then everything is blocked.
Just add last rule with only reject action - this is enough !It is clear that you need to add all the necessary ones to the Access list, but in the end you need a forbidding entry that says enables blocking by mac address?
Make a difference between wifi station mode alone and wifi station mode as a bridgeport in the bridge!Well, make up your mind, you wrote in your previous post that ...Basebox2 does not work in any mode
Station standalone mode works on both boards /Basebox2 or RBM33G/
I'm talking about old devices connected to the new ones or with new wave2 drivers. For me work station pseudobridge mode, but in the stationbridge mode does not pass traffic, in station mode pass only L2.Yup, already in beta versions. Tested it as well.
If you have another packet except the main uninstall him first. Then make downgrade procedure!I've uploaded routeros-arm-6.49.11.npk, hit downgrade button, LHG reboots with 7.13 version
I bought over 100 of them and they were all 256MB! I think they wrote it wrong, it's even commented if I'm not messing around in threads back.But the same specs page you linked above lists 128MB ... hmm. You ok?
The cAP AC have 256MB and I think they are enough.And they probably won't. cAP ac and hAP ac2 are in the same boat, too little memory (RAM) for the full featured drivers.
They could ship some -smallbuffers version of drivers for these devices, but doubt that this will see any light.
Clear. They haven't updated the specs yet!yes yes.. with the MikroTik drivers, not with the Wave2 capable ones.cAP AC is IPQ4018 based and support max 300mbps data rate in the 2.4GHz band[...]
WPA/WPA2, with the old driver /wireless package/ work fine! All of the other devices can be connected without a problem!What security settings do you have on 2ghz channel ?
Some old devices only want as low as WPA.
Wave 2 driver for ipq4xxx ?!Yes, WPA3 on AC devices, etc. Also old and new type of CAPsMAN can be managed on the same router. Not as a unified mechanism, but two separate and parallel systems on the same router.
ip fi f add chain=input protocol=gre place-before=0
At one end, the connectors are like those for the wifi card, and at the other end, they are like those for the sector antenna cables.Is there any difference in which connectors to connect pigtails for sector antennas?Why not ? Just use the necessary antenna pigtails!
Why not ? Just use the necessary antenna pigtails!This is you about my question, can the module be used with two sector antennas?yes, of course. You can turn off chains in advanced options, can even assign different ones for TX/RX...
ip fi n add chain=srcnat src-address=172.16.129.0/24 dst-address=172.16.0.0/24 action=src-nat to-addresses=172.16.0.1
Ok, where does it say that all ARM devices are supported? ... It is assumed that as you read, you can also think!O.K. I have RB 4011 based on arm... WHERE should I put SATA or NVMe disks ??? and how???
Please add a freakin' sentence which will describe it just a bit more....
and OpenWRT router ?EoIP is possible only between two MikroTik routers.
Without or wiith some ethernet usb adapter ?I wonder, is it possible to use RB5009 USB port as a management port? Without any USB-Ethernet-adapters?
Your problem is in the bold number or 25mb/ps up - the office link!.....
Office is 1000/25
Home is 1000/1000
....
I'm talking about a zerotier that you offer us all the time .EOIP over wireguard is not using a third party !!
For example, I do not want to be dependent on another - a third side in communications !
For example, I do not want to be dependent on another - a third side in communications !Two things I don't understand.
a. why not EOIP over wireguard
b. why not forget eoip+ipsec or eoip+wireguard and simply use zerotier??
Reading: https://www.cyberark.com/resources/thre ... mple-trick
Tl;Dr they managed to retrieve 3,500 wireless passwords from 5,000 networks using the PMKID hash.
interface wireless security-profiles set disable-pmkid=yes
I use fixed channel - viewtopic.php?f=7&t=170718#p834491Your client is set to auto frequency and channel width setting?
Thanks. I will test it again with this version !I had a similar issue with RBM11G and R11e-5HacD. Now 6.46.8 installed and no problem
The route rule works under ROS v6.xx and does not work with ROS v7.xx?
Hi Normis,MAC connection is fragile and is only to be used for setting up IP address. Then you can reconnect and use the device normally. MAC is only for emergency access.
Try to allow gre on 941 input chain too !I dont need connect to router, i can do it. I need connect to last router LAN.
I need two VPN connections on one IP, but for two devices.
First vpn is working fine, it is my management vpn. But i need another connection directly to last routers lan.
Just set L2TP MRRU=1580 on both sites and reconnect the tunnel !I'm stuck almost for months now looking for the solution but still no luck.
No firwall /filter, nat, etc/ = no internet !Thanks for your suggestion, but sadly it did not help.
For exemple this testThis seems to be a common pattern, looks like it's pretty much impossible to achieve more than 250-300 Mbit/s real world single client throughput with Mikrotik ac WiFi.
In case you ever manage to break this limit please let me know how you did it
NTP . In ROS this is System-SNTP client .With ntp client!!!Synchronize time on routerboard with ntp client or manually ?
Just set MRRU=1610 on ppp connection on both sides !On the ppp profile dont use Change TCP MSS - put NO .Does nobody have any Idea ;(
Ooo sorry .... by the way, all is clear and there is nothing to discuss, but I will follow the topic .Sorry this discussion is NOT to include mangling LOL.
Еxactly !So if I put a vpn server under a public ip pc or routerboard I could connect the sxt routerboard to that server and example Android phone to same server and then with this" kind of bridge " see sxt contents with Android phone and viceversa ?
This is my question too !Wow, okay that is good to know. I wonder why hotspot functionality bypasses NAT rules??
I cant see any IpSec IKE2 Site to Site configuration ! You may have set up some L2TP with IpSec ppp connection and routing the networks on it - do you have any routes for them in both places ?really hoping someone can point out what I'm doing wrong
Use NETMAP for source nat !?Hi
Can you please help me how to do Dynamic nat of apporx 100 private ip with /24 public ip pool . thanks
You don't have rules in the routers at all ?I do nor heva any limitations in filter