MikroTik

wfuzatto

Hello, I'm running a pair of RB NetMetal 5 and a pair of RBD23UGS-5HPacD2HnD. At first, the RBD23UGS-5HPacD2HnD started losing 4 packets every 370 packets. https://prodatastelecom.com.br/mk/3.png https://prodatastelecom.com.br/mk/4.png I've rebooted, reconfigured, changed channel, etc etc.. and stil...

wfuzatto

Hi, I've been using RB922 for sometime. So now i tried the nemetal AC², it comes with 2.4 and 5ghz radios. It was on older firmware, in superchannel it shows all 2.4 channels, 2.2 to 2.8 ghz. I've updates it, ant these channels are no longer avaiable. I'm runing a 24km link, 32dbi antenna. 2.4 ghz l...

wfuzatto

+1, almost brand new got bricked. All leds flash once, but cannot get LAN leds at all.

I can do return to factory settings from reset button.

wfuzatto

I've tryied from 6.27 to 6.47.1. No one work..

wfuzatto

@normis?

wfuzatto

None of RouterOS images can upgrade my routerBOOT.

wfuzatto

Mikrotik has removed the archive from downloads. Is there any other repository for really old firmwares?

wfuzatto

Hi,

My RB433AH freezes between 3 days since new. But I want to make it usable. I've updated RouterOS, but I cannot upgrade routerBOOT.

wfuzatto

Hello, I've a RB433AH that freezes once time a week. So I've updated RouterOS but when I try to upgrade RouterBOOT this message show up.: MMMM MMMM KKK TTTTTTTTTTT KKK MMM MMMM MMM III KKK KKK RRRRRR OOOOOO TTT III KKK KKK MMM MM MMM III KKKKK RRR RRR OOO OOO TTT III KKKKK MMM MMM III KKK KKK RRRRRR...

wfuzatto

Hello, I've nothing special. Not even using Vlans. Here's my config: /interface bridge add fast-forward=no name=bridge /interface wireless set [ find default-name=wlan1 ] ampdu-priorities=0,1,2,3,4,5,6,7 band=\ 5ghz-a/n/ac channel-width=20/40/80mhz-eeeC disabled=no frequency=auto \ frequency-mode=su...

wfuzatto

Hello, Recently a message started to show up intermitently about loop detection. I've changed the MAC Address from wlan, disabled Neighbor discovery, searched in the network for a similar MAC Address. The system is running all interfaces on a bridge. Any ideas? http://prodatastelecom.com.br/sites/P4...

wfuzatto

Hello, I was figuring out some questions about use DNS remote requests. 1 - If I use 8 DNS servers, hows MK will decide to use them all? 2 - When one of them goes offline, it will retry to send on some other one? DNS list would be like: DNS1 - 8.8.8.8 DNS2 - 8.8.4.4 DNS3 - 1.1.1.1 DNS4 - 1.0.0.1 DNS...

wfuzatto

Hello, I was wondering a solution that may give me a low latency and high throughput. So I was googling... Some solutions like AirFiber and licenced radios uses one radio to RX and another to TX. So my idea is to put 2 RB921 on each side, combined with a duplexer. . POP1 POP2 RX: 5.2Ghz <- TX: 5.2Gh...

wfuzatto

What about a fixed VHT data rate for AC device? It would be a nice feature!

wfuzatto

Could it be a improvement for ROS 7?

wfuzatto

Any ideas?

wfuzatto

@Normis, I need a solution to this too. Even when you are in the VHT menu there is no option to select a minimal or maximum data rates, you can select only 0-7~0-9. Right?
I was wondering that I could stablish a connection like 5-7 VHT or for example static 585Mbps on 80Mhz...

Is it possible?

wfuzatto

Hi,

I'm having some packet loss when using a 100Mbit link in CRS317.
I've tested it with more 10 different devices.
My results when using:

10Mbit - no packet loss
100Mbit - 30% of packet loss
1000Mbit - no packet loss

This problem is occuring on RouterOS and SwOS.

Any solutions?

wfuzatto

Hello, I'm using a CRS317 and a RB260 to test a SFP link. So I got two problems: 1 - CRS317-1G-16S+ freezes SFP cages. *Normally on the first boot of the day, but not only, the sfp cages cannot recognize the sfp modules, it shows only 0C on temperature, you can change the module, port, conect, recon...

wfuzatto

Hello, I've received a brand new CRS317-1G-16S+ and it was very slow. So I decided to upgrade and it bricked. This problem was solved with netinstall by serial, because it won't respond to reset button. Now I'm testing with bandwidth and CPU load dont get higher than 50% as shown below: http://proda...

wfuzatto

Hello Everyone, I've been working on a method to hide ( from curious eyes ) the information from hotspot in pap method. So I'd a very simple way to encrypt the username and password. It looks like this on packet sniffer: http://prodatastelecom.com.br/sites/mikrotik/pap.png This script goes into the ...

wfuzatto

Hi, Some hosts are getting logged out by hotspot and showing this message: host removed: ip binding changed http://prodatastelecom.com.br/sites/mikrotik/ipbind.png In the Logs the IP still the same.. (?) I've tried to set a bigger DHCP lease but this still happen. Hotspot Address pool is set to none...

wfuzatto

boen_robot, You got it!

I've tested on port 80 and it works! I was using port 58728...
Now I'll contact GD's support to open a private port!

Thank you!
Regards,

wfuzatto

Hello boen_robot, Thanks for your reply. I've tried to contact goDaddys support and the answer is literally: Mikrotik API may be the problem. https://www.godaddy.com/community/cPanel-Hosting/Mikrotik-PHP-API-Problem/td-p/95333 All settings for PHP are on, no special configurations on Apache.... @Nor...

wfuzatto

Hello, I'm currently using a remote web server to run PHP API, it run smooth and well. But when I try to use a Cloud Hosted Linux Web Server on GoDaddy this same API get "Connection refused". Anyone know anything about any problem with GoDaddy? I've tried with two another Cloud servers and...

wfuzatto

Yes, but is there another way tô Prevent it?
i.e. a mixed network.. Fiber + wireless + utp.... 2..3 brands of devices with a Mk controller...

wfuzatto

Is there any way to block the communication between clients?

Like in ISP provider, using PPPOE clients can see each other and use more bandwidth than they get.

wfuzatto

Yes, my set is running on: 1 - masquarade both links. 2 - use distance 2+ on route table for the backup link. 3 - use a script on netwatch to disable the main gateway when it goes offline. 4 - use a defined route that your netwatch will monitor the main link. 5 - use a stable public ip to ping your ...

wfuzatto

Hi Companion,

Thank you! I've tested your procedure, nothing happen. =(

By the way I got success using serial xModem file transfer.

Routerboot:
From 2.29
To 3.41

Regards.

wfuzatto

Hello, I'm currently trying to upgrade a RB 433 AH but this error shows up: [admin@MikroTik] > system routerboard print routerboard: yes model: 433AH serial-number: 185C01F5008E firmware-type: ar7100 factory-firmware: 2.15 current-firmware: 2.29 upgrade-firmware: 3.41 [admin@MikroTik] > system route...

wfuzatto

Hi paulct, This is a work-in-progress system to control hotspot use and integration with hotel programs. So I'm testing in various types of RouterOS based systems, such as CRS's, RB's and CCR's. This problem showed up ( until now ) on CRS's site. You can see more here: user: trial pass: trial http:/...

wfuzatto

Hi karwos,

I've tested on 6.x, it worked as it seems to be.

As soon this problem happen again I'll test this rules and post a reply here.
Thanks!

wfuzatto

Hi R1CH, Thanks for your reply. Everytime this happens I block the MAC in Hotspot > IP-Binginds. So it happened again today and here are some informations: http://prodatastelecom.com.br/assets/images/attack2.png http://prodatastelecom.com.br/assets/images/attack3.png Sometimes it does not take 100% ...

wfuzatto

Hello everyone, This system is running a hotspot, sometimes an user shows up and the CPU goes to 100%. I've tried to search what's going on and i'm stuck at this. The only thing I know is the user does not authenticate and start to send/receive this packets. Any ideas? A script / firewall to block t...

wfuzatto

I'm trying to access internal folders of RouterOS to change\translate some web templates. But when I try to reach the address above, an error message shows up.

i.e. when using user-manager: http://10.0.0.1/um/img/
Using HTTP -> error 404
FTP -> no such directory

Anyone knows how to get there?

wfuzatto

I got a similar problem, but using hotspot. The handshake could not be finished in a good time.
MK: CRS125
V: 6.39.2
Ap's: UniFi AC Lite

This problem shows up when the client roam between the AP's.

wfuzatto

Hello all, We developed a authentication system integrated with MK API for hotels. The system was running fine until 2 weeks ago, when this problems starts to show up: We`re running on a CRS125 for hotspot+dhcp, and the wifi system is a UniFi AC. The problem is: Sometimes when the client goes around...

Search found 37 matches

Radio packet loss

Netmetal AC² 2.4 link

Re: New haP ac2 became a brick

Re: RB433AH cannot upgrade routerboot

Re: RB433AH cannot upgrade routerboot

Re: RB433AH cannot upgrade routerboot

Re: RB433AH cannot upgrade routerboot

RB433AH cannot upgrade routerboot

Cannot upgrade RouterBOOT

Re: LOOP problem

LOOP problem

DNS Server

FULL DUPLEX WIRELESS LINK

Re: Feature requests

Re: 802.11ac required ratarate

Re: 802.11ac required ratarate

Re: 802.11ac required ratarate

CRS317 PACKET LOSS

CRS317 SwOS - SFP Problems

CRS 317 CPU LOAD

HOTSPOT PAP LOGIN Encrypted

Hotspot - host removed: ip binding changed

Re: GoDaddy's "Connection refused" - PHP API [SOLVED]

Re: GoDaddy's "Connection refused" - PHP API [SOLVED]

GoDaddy's "Connection refused" - PHP API [SOLVED]

Re: Prevent Client comunication - block relay

Prevent Client comunication - block relay

Re: Hotspot can get internet from a diferent gateway?

Re: Routerboot Upgrade Fail

Routerboot Upgrade Fail

Re: Hotspot Attack ( high CPU use )

Re: Hotspot Attack ( high CPU use )

Re: Hotspot Attack ( high CPU use )

Hotspot Attack ( high CPU use )

User-Manager Template

Re: ROS 6.38 serious DHCP server problem

Hotspot Lost DHCP Lease