I have this --> https://www.amazon.it/dp/B07PHQNLFY/ref ... uFbW0EY64V

8,8Ah
poe output 24 or 48

vdc output 9 or 12

USB 5 vdc output

Can a PowerBox Pro support multiple power inputs at the same time, i.e. PoE and DC jack?

Our hope is that we can have both plugged in so one is a failover for redundancy.

It also supports passive or standard 802.3at/af PoE input/output.

*) led - added "dark-mode" functionality Sunglasses not needed anymore? in my LDF I can not find the function.... Is not dark-mode function - is a functionality. On some devices, you can close the LEDs using the command: all-leds-off Read here: https://wiki.mikrotik.com/wiki/Manual:System...

*) led - added "dark-mode" functionality

Sunglasses not needed anymore?

in my LDF I can not find the function....

I have updated two RB750UP ros 6.43.2, when I try to update the firmware the RB stops working and needs a full reset. The current firmware on board in 3.19, I would like to upgrade it to 6.43.2 :) I tried a search on the forum but I did not find any information. I add: at every reboot I have to comp...

Small towers fixed on the rocks with steel rods or galvanized iron piles, We use them for small POPs in the rural areas of Sardinia (IT). Very often in the hills it is not possible to have electricity, so we use 24V photovoltaic panels and batteries. The low power consumption of MT devices allows f...

At 200 meters it should work. But it will be difficult to mount it.

Thanks normis!

for the bracket I would have to try, it should be the last of the problems!!

Hello everyone, I would need to install a pto-pto link of about 200mt, my idea is to use two LDF 5 ac without the dish. I preferred LDFs because they are small and for external use. Ideas? tips? your experiences? Thanks in advance! https://s17.postimg.cc/57tol3zrj/Schermata_2018-05-02_alle_06.56.52....

I've the same version without problem! My OS Hight Sierra version is 10.13.4

Try with Safari Technology Preview, download it from MacApp Store

Try something like this: chain=input action=drop src-address-list=Port_Scanner chain=input action=accept protocol=tcp psd=21,3s,3,1 src-address="IP of HEx" chain=input action=add-src-to-address-list protocol=tcp psd=21,3s,3,1 address-list=Port_Scanner address-list-timeout=1w or with a whi...

Extract Hex IP from list or deactivate the rule?

I would like it if possible to make a white list with the addresses known to be excluded from the rule.


sorry but I'm trying to learn!

Hi all! I've a CRS125 with this firewall rules 17 ;;; Port Scanner Detect chain=input action=add-src-to-address-list protocol=tcp psd=21,3s,3,1 address-list=Port_Scanner address-list-timeout=1w 18 ;;; Drop to port scan list chain=input action=drop src-address-list=Port_Scanner In my lan i've a RB750...

I had the same visit on three different days... https://s18.postimg.cc/wvxo6sr6x/18.04.2018.jpg https://s18.postimg.cc/findrxo61/19.04.2018.jpg https://s18.postimg.cc/jrs3u3jpl/20.04.2018.jpg I noticed that it is from the day after the update 6.42 .... randomness ??? I have set the due rules... I ho...