Community discussions

MikroTik App

Search found 11 matches

by dlausch
Wed Jul 31, 2019 12:43 pm
Forum: Announcements
Topic: MikroTik News June 2019 (Issue #89)
Replies: 38
Views: 30325

Re: MikroTik News June 2019 (Issue #89)

* New MikroTik LoRa products- Internet of things has never been so affordable
Are there further release dates known yet?
by dlausch
Wed Jul 03, 2019 10:54 pm
Forum: Announcements
Topic: v6.45.1 [stable] is released!
Replies: 415
Views: 197554

Re: v6.45.1 [stable] is released!

i have found the failure. connecting with the android app over vpn (i am not at home) is fine. connecting with winbox from my windows laptop over vpn is fone too. only winbox running with wine on my macbook shows this failure and after deleting the cache in winbox it connects again on my macbook I'...
by dlausch
Thu Apr 18, 2019 10:19 am
Forum: General
Topic: HP Procurve Switch get stuck if Microtik cAP or wAP ist connected [SOLVED]
Replies: 7
Views: 2454

[SOLVED] HP Procurve Switch get stuck if Microtik cAP or wAP ist connected [SOLVED]

Problem solved... Inspired by the post of sindy My first suspicion would be that when the Mikrotik is in cAP configuration, it connects to the ProCurve via a member port of /interface bridge with protocol-mode set to rstp which is the default, and that for some reason the ProCurve does not identify ...
by dlausch
Mon Apr 08, 2019 9:58 am
Forum: General
Topic: HP Procurve Switch get stuck if Microtik cAP or wAP ist connected [SOLVED]
Replies: 7
Views: 2454

Re: HP Procurve Switch get stuck if Microtik cAP or wAP ist connected [SOLVED]

Good Morning Sindy, thank you for your reply... ... I understood that the switch doesn't just block the port to which the cAP is connected (which is what usually happens in these cases) but you lose IP access to the management of the switch while the switch continues forwarding other traffic, is tha...
by dlausch
Thu Apr 04, 2019 6:44 pm
Forum: General
Topic: HP Procurve Switch get stuck if Microtik cAP or wAP ist connected [SOLVED]
Replies: 7
Views: 2454

Re: HP Procurve Switch get stuck if Microtik cAP or wAP ist connected [SOLVED]

Further tests: Reset wAP to factory default, connect AP to the switch, everything is fine... If I do System —> reset configuration—>> enable CAPS mode, AP reboot and after RouterOS is up, Switch looses Connectivity... APs RouterOS Version 6.43.14 also board firmware HP procurve 5406 zl Firmware vers...
by dlausch
Thu Apr 04, 2019 6:25 pm
Forum: General
Topic: HP Procurve Switch get stuck if Microtik cAP or wAP ist connected [SOLVED]
Replies: 7
Views: 2454

Re: HP Procurve Switch get stuck if Microtik cAP or wAP ist connected [SOLVED]

I‘ve done some test this evening,... The STP config on the port dosen‘t have some insect of the switch and AP Problem. I figured out also that the switch doesn’t get stuck but it looses alle connections to the ip net, the connected clients also. Connection via serial Console already works... It does...
by dlausch
Thu Apr 04, 2019 12:55 pm
Forum: General
Topic: HP Procurve Switch get stuck if Microtik cAP or wAP ist connected [SOLVED]
Replies: 7
Views: 2454

HP Procurve Switch get stuck if Microtik cAP or wAP ist connected [SOLVED]

Hi there, we are using serval Mikrotik AccessPoint in our Company. Alle AcessPoint are used in CAP-mode in serveral lokations. CAPSMAN and most of the AccessPoints are working without problems. Alle APs are connectet through HP Procurve Switches (29 Series, 26 Series, 25 Series and 54 Series) and ar...
by dlausch
Thu Aug 30, 2018 1:26 pm
Forum: General
Topic: How to set broadcast limit or broadcast filter
Replies: 2
Views: 2286

Re: How to set broadcast limit or broadcast filter

Problem still exists...
The CAPac stop working because the system can't handle the high load of broadcast traffic.
Is there any way to handle this?

Chances in the last days:

Upgrade the RouterOS:
CAP RouterOS Version: 6.42.7
RB2011 RouterOS Version: 6.42.7
by dlausch
Fri Jul 06, 2018 4:17 pm
Forum: General
Topic: How to set broadcast limit or broadcast filter
Replies: 2
Views: 2286

How to set broadcast limit or broadcast filter

Hello Mikrotik-Forum-User I build a installation in a german youth center with one RB2011 and four cap ac. The four cap ac are controlled by capsman on the rb2011. There are two Networks with sperated SSID connected to the caps. The first one is a internal WLAN network for the working personal The s...
by dlausch
Tue Jan 24, 2017 3:18 pm
Forum: Scripting
Topic: DNS DHCP script, scheduler not enough permissions
Replies: 0
Views: 1571

DNS DHCP script, scheduler not enough permissions

Hi, I'm new a RouterOS scripting, so I need some help to understand a problem. I'm using a script from http://wiki.mikrotik.com/wiki/Setting_static_DNS_record_for_each_DHCP_lease to create DNS entries for each DHCP lease. the script: :local zone "dhcp"; :local ttl "00:05:00" :loc...
by dlausch
Thu Jan 05, 2017 1:46 pm
Forum: General
Topic: Feature Request: Tincvpn
Replies: 15
Views: 8877

Re: Feature Request: Tincvpn

This would be a very nice feature....
I'm also interested.