Community discussions

Search found 197 matches

by eriitguy
Sun Mar 04, 2018 1:34 pm
Forum: The Dude
Topic: bug on disapearing nics
Replies: 4
Views: 885

Re: bug on disapearing nics

fjacques,
We use Dude v6 - Backup to FTP.
Dude v6 - Backup locally make same thing.

Can't say currently anything about layout and discovery - we add all devices manually.

Thank you!
by eriitguy
Sat Mar 03, 2018 9:59 am
Forum: The Dude
Topic: bug on disapearing nics
Replies: 4
Views: 885

Re: bug on disapearing nics

Hello, fjacques! We have noticed something similar but with earlier version of Dude v6. Interfaces LAN1, DMZ and WAN disappeared from the list. It also was noticed that Dude v3.6 in same time show all correctly. Request was sent to support: "[Ticket#2017062122000832] Dude v6 - SNMP tab data incorrec...
by eriitguy
Wed Feb 07, 2018 5:48 pm
Forum: The Dude
Topic: Recovering the Dude after db corruption.
Replies: 5
Views: 1684

Re: Recovering the Dude after db corruption.

Hello, amt!

Did you try to ask support from Mikrotik?
normis sometime mention that they may not read all forum topics.

Thank you!
by eriitguy
Wed Feb 07, 2018 1:03 pm
Forum: The Dude
Topic: Installation of the dude
Replies: 3
Views: 1017

Re: Installation of the dude

Hello, melrol0611! As was mentioned by jarda, Dude v6 server currently supported only by some RouterBOARD platforms: The Dude v6 Installation - System requirements for server package Hardware: Tile - CCR series hardware ARM - RB3011, RB1100AHx4 Dude Edition (RB1100Dx4), hAP AC2* mmips - hEX (RB750Gr...
by eriitguy
Tue Feb 06, 2018 9:08 am
Forum: The Dude
Topic: Configure different polling and notification settings for same probe
Replies: 0
Views: 386

Configure different polling and notification settings for same probe

Hello! We are trying to configure two different subset of notification for same probe: Device probes ping Polling Probe Interval: Default Probe Timeout: Default Probe Down Count: Default Notifications Email-24h Logs-Syslog And we also want to get SMS notifications but with slightly different polling...
by eriitguy
Mon Feb 05, 2018 8:31 am
Forum: The Dude
Topic: Show on appearance: Label ROS command [SOLVED]
Replies: 3
Views: 950

Re: Show on appearance: Label ROS command [SOLVED]

Hello, OnixJonix!

Topic Syntax for labels probably may help you.


Thank you!
by eriitguy
Fri Feb 02, 2018 1:19 pm
Forum: The Dude
Topic: how to send sms notification when there is trying to access ports
Replies: 1
Views: 463

Re: how to send sms notification when there is trying to access ports

Hello, afis!

Probably information from the following forum posts may help you.:
1. Triggering script from a firewall rule
2. Log Parser - Event Trigger Script


Thank you!
by eriitguy
Fri Feb 02, 2018 1:05 pm
Forum: Announcements
Topic: Winbox 3.12 released!
Replies: 55
Views: 43894

Re: Winbox 3.12 released!

It seems that at the moment "Check For Updates" doesn't see version 3.12 of the Winbox.


Thank you!

just checked.. it does find the update...

It works, thank you!
by eriitguy
Fri Feb 02, 2018 9:19 am
Forum: Announcements
Topic: Winbox 3.12 released!
Replies: 55
Views: 43894

Re: Winbox 3.12 released!

It seems that at the moment "Check For Updates" doesn't see version 3.12 of the Winbox.


Thank you!
by eriitguy
Fri Feb 02, 2018 9:15 am
Forum: The Dude
Topic: Dude - Email notification through Gmail on Windows - via mailsend.
Replies: 35
Views: 19870

Re: Dude - Email notification through Gmail on Windows - via mailsend.

Hello, lodilodilodi!

May you please verify if in the Polling tab a checkbox is checked for Email notification you have configured?


Thank you!
by eriitguy
Fri Jan 26, 2018 2:42 pm
Forum: Announcements
Topic: v6.42rc [release candidate] is released!
Replies: 538
Views: 97306

Re: v6.42rc [release candidate] is released!

Version 6.42rc15 has been released. Changes since previous release: *) routerboard - added RouterBOOT "auto-upgrade" after RouterOS upgrade (extra reboot required); If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generate...
by eriitguy
Fri Jan 26, 2018 9:18 am
Forum: The Dude
Topic: Ping Switch TL-SG108E
Replies: 7
Views: 1098

Re: Ping Switch TL-SG108E

Hello, suserevent!

Does your device is pingable from the Dude?
It is same model - TL-SG108E?


Thank you!
by eriitguy
Thu Jan 25, 2018 5:54 pm
Forum: The Dude
Topic: Dude - Device RouterOS on no-standard Port
Replies: 25
Views: 8992

Re: Dude - Device RouterOS on no-standard Port

m4t7e0, thank you!

This topic was reported to the support in one of the the initial request. Hope they will be able to fix the issue. Don't know when as Dude development is frozen/slowed.


Thank you!
by eriitguy
Thu Jan 25, 2018 4:28 pm
Forum: The Dude
Topic: Dude - Device RouterOS on no-standard Port
Replies: 25
Views: 8992

Re: Dude - Device RouterOS on no-standard Port

m4t7e0, on which platform your Dude server is running and who are clients? If you can, please provide some models of the Routerboards and their installed ROS versions. As you described in the first post you currently on the 'Bug fix only' channel and use latest channel version. Anyway I see the issu...
by eriitguy
Thu Jan 25, 2018 2:20 pm
Forum: The Dude
Topic: dude-install-6.41.exe safe?
Replies: 2
Views: 662

Re: dude-install-6.41.exe safe?

Trying to install dude-install-6.41.exe from https://download2.mikrotik.com/routeros/6.41/ and it keeps getting blocked on my machine via Norton Security with comment: "Threat type: Insight Network Threat. There are many indications that this file is untrustworthy and therefore not safe" Any sugges...
by eriitguy
Thu Jan 25, 2018 1:17 pm
Forum: The Dude
Topic: Dude - Device RouterOS on no-standard Port
Replies: 25
Views: 8992

Re: Dude - Device RouterOS on no-standard Port

m4t7e0, thank you for explanation! Why you can't change Winbox port for all of the devices, which issue is in your case? In my test environment I had recently an issue with ROS devices with non-default Winbox port and reported it to the support: [Ticket#2018010322001999] RE: Dude v6 - ROS with custo...
by eriitguy
Thu Jan 25, 2018 8:18 am
Forum: The Dude
Topic: Dude - Device RouterOS on no-standard Port
Replies: 25
Views: 8992

Re: Dude - Device RouterOS on no-standard Port

Hello, m4t7e0!

All the device are collected, but i can't accesso on it via Dude...
What device and how do you trying to access it?
May you please explain more detailed what do you trying to do?

How i can change the default RouterOS port on Dude Device?
Dude device is Dude server?


Thank you!
by eriitguy
Wed Jan 24, 2018 1:07 pm
Forum: The Dude
Topic: Routeros update, but not bootloader, how to solve it?
Replies: 1
Views: 566

Re: Routeros update, but not bootloader, how to solve it?

Hello, rado3105!

I don't know how. Maybe information from the following topic may help you: Mass command execution.


Thank you!
by eriitguy
Tue Jan 23, 2018 5:44 pm
Forum: The Dude
Topic: Dude v6 issue - Can't connect to the server - Connecting
Replies: 2
Views: 1554

Re: Dude v6 issue - Can't connect to the server - Connecting

Hello, allstarcomps! Thank you for reply! I have added additional information about Dude client in the initial post. Issue you describing is related to the case that for Dude client auto-update administrative privileges are required: Connect the same version of the client, with several different ver...
by eriitguy
Mon Jan 22, 2018 10:00 am
Forum: The Dude
Topic: Dude v6 issue - Can't connect to the server - Connecting
Replies: 2
Views: 1554

Dude v6 issue - Can't connect to the server - Connecting

Hello! We experienced today an issue with Dude server v6.41 on CHR running on ESXi 6.x and Dude client v6.41 on Windows server 2012R2 Standard x64. Probably it worked fine because it send us some notification but we can't connect to it using Dude client. It was verified from 2 locations. We noticed ...
by eriitguy
Fri Jan 19, 2018 10:57 am
Forum: The Dude
Topic: Hosting The Dude Server on Raspberry Pi
Replies: 2
Views: 3049

Re: Hosting The Dude Server on Raspberry Pi

Hello, neutronlaser! It seems that people already started discussion about ROS on Raspberry Pi: [REQUEST]Raspberry Pi . In case of the Dude a support from its side will be also required. Currently Dude support only the following platforms: System requirements for server package Hardware: Tile - CCR ...
by eriitguy
Thu Jan 18, 2018 9:24 am
Forum: The Dude
Topic: The map is not saved
Replies: 2
Views: 502

Re: The map is not saved

Hello, John39!

Probably you may find some information in the following forum topic: The dude reset configuration [SOLVED]


Thank you!
by eriitguy
Mon Jan 15, 2018 9:03 am
Forum: The Dude
Topic: Connect the same version of the client, with several different version CHR The Dude servers?
Replies: 5
Views: 1277

Re: Connect the same version of the client, with several different version CHR The Dude servers?

nikola033,

May you try to run Dude client as administrator? It seems that auto-update may not work because it may not have rights for this.


Thank you!
by eriitguy
Sun Jan 14, 2018 2:02 pm
Forum: The Dude
Topic: Dude server v.6 - not working with port forwarding
Replies: 33
Views: 3669

Re: Dude server v.6 - not working with port forwarding

erebusodora, May I ask you to verify if ROS collecting data method show correct data in your configuration? What will happening if we will configure 'routeros management' service with custom Winbox port for all devices behind NAT? For this we should: 1. Elect 'no-snmp' SNMP profile. 2. Enable checkb...
by eriitguy
Sun Jan 14, 2018 1:44 pm
Forum: The Dude
Topic: The program thinks for a long time!
Replies: 5
Views: 980

Re: The program thinks for a long time!

Hello, edinorog! We also have similar issue and reported it to the support: [Ticket#2018010322001999] RE:Dude v6 - ROS with custom Winbox port - Dude hangs issue. In our case it hang when to the ROS device with custom Winbox port a "routeros management' service is added and disabled: https://www.you...
by eriitguy
Fri Jan 12, 2018 5:33 pm
Forum: The Dude
Topic: Link bitrate stats not working
Replies: 24
Views: 4173

Re: Link bitrate stats not working

apiel1, Which interfaces do you have on your devices - 1Gbps or 10Gbps? From the SNMP Counters: Frequently Asked Questions : Q. When should 64-bit counters be used? A. RFC 2233 adopted expanded 64-bit counters for high capacity interfaces in which 32-bit counters do not provide enough capacity and w...
by eriitguy
Fri Jan 12, 2018 4:53 pm
Forum: The Dude
Topic: Link bitrate stats not working
Replies: 24
Views: 4173

Re: Link bitrate stats not working

apiel1,

Om my test map I have something like this:
Dude-v6-Link-appearance-01.png
Does the issue is manifested only with one host/link or with any other links too? Do you have a possibility to verify it on another device/link?


Thank you!
by eriitguy
Fri Jan 12, 2018 4:34 pm
Forum: The Dude
Topic: Link bitrate stats not working
Replies: 24
Views: 4173

Re: Link bitrate stats not working

apiel1, thank you for provided information!

It looks like all is configured correctly on your side and Dude got information using SNMP.

May you try to add some variables into the link label, near existing one?
[Interface.Name]
[Interface.Index]
[Interface.Type]
[Interface.Speed]

Thank you!
by eriitguy
Fri Jan 12, 2018 11:18 am
Forum: The Dude
Topic: Feature request - Specify custom SNMP port for the device [SOLVED]
Replies: 3
Views: 1192

Re: Feature request - Specify custom SNMP port for the device [SOLVED]

It seems, that at the moment, Dude can't handle configuration described in the posts above. For more information please see Dude server v.6 - not working with port forwarding.


Thank you!
by eriitguy
Fri Jan 12, 2018 11:16 am
Forum: The Dude
Topic: Dude server v.6 - not working with port forwarding
Replies: 33
Views: 3669

Re: Dude server v.6 - not working with port forwarding

Hello, erebusodora! It seems that you are right, Dude v6 can't work correctly with SNMP forwarded ports at the moment - which was confirmed by support. Forgive me for misleading you... As you mentioned I have added links between devices. The results: 1. Information on devices labels is correct. 2. I...
by eriitguy
Fri Jan 12, 2018 9:13 am
Forum: The Dude
Topic: Monitor number of connected clients to hotspot [SOLVED]
Replies: 1
Views: 649

Re: Monitor number of connected clients to hotspot [SOLVED]

Hello, Djago!

Maybe the following topics contain some information:
1. SNMP OID for Qty of Wireless Clients Connected.
2. Hotspot active users OID for SNMP.


Thank you!
by eriitguy
Fri Jan 12, 2018 9:04 am
Forum: The Dude
Topic: Link bitrate stats not working
Replies: 24
Views: 4173

Re: Link bitrate stats not working

apiel1,

May you try to add devices and their links on the test map in same Dude to verify if newly created object will work as expected?


Thank you!
by eriitguy
Thu Jan 11, 2018 6:23 pm
Forum: The Dude
Topic: Password bug with The Dude maps v6 (we can read XML)
Replies: 12
Views: 1758

Re: Password bug with The Dude maps v6 (we can read XML)

Hello, nikola033!

It seems that we have similar situation:
Dude-v6-Device-xml.png

Thank you!
by eriitguy
Thu Jan 11, 2018 6:19 pm
Forum: The Dude
Topic: Link bitrate stats not working
Replies: 24
Views: 4173

Re: Link bitrate stats not working

apiel1, hello!

Maybe interfaces indexes were changed and need to be re-selected on link properties, may you look at this?


Thank you!
by eriitguy
Thu Jan 11, 2018 5:26 pm
Forum: The Dude
Topic: Dude Network Map reset on discovery + Add default winbox password for discovery?
Replies: 8
Views: 2554

Re: Dude Network Map reset on discovery + Add default winbox password for discovery?

All my devices have same user/pass , MikroTik should add "routerOS credentials" in dude and then will be easier to discover all devices with just one click. At this point it is not possible to do that. Do you know any workaround ? A feature request was created and we are waiting to be implemented: ...
by eriitguy
Thu Jan 11, 2018 5:24 pm
Forum: The Dude
Topic: Dude Network Map reset on discovery + Add default winbox password for discovery?
Replies: 8
Views: 2554

Re: Dude Network Map reset on discovery + Add default winbox password for discovery?

nasbot,

Does mass edit work for you?
1. Select multiple devices using mouse (also a Ctrl button may be used in case of need).
2. Right click.
3. Settings.
4. Define username/password.
5. Ok.


Thank you!
by eriitguy
Wed Jan 10, 2018 3:08 pm
Forum: The Dude
Topic: Dude Network Map reset on discovery + Add default winbox password for discovery?
Replies: 8
Views: 2554

Re: Dude Network Map reset on discovery + Add default winbox password for discovery?

nasbot,

May you try to specify username/password for multiple devices at once?


Thank you!
by eriitguy
Tue Jan 09, 2018 9:03 am
Forum: The Dude
Topic: Dude server v.6 - not working with port forwarding
Replies: 33
Views: 3669

Re: Dude server v.6 - not working with port forwarding

erebusodora, Please note that The Dude does not know anything about the port forwarding, this is done the layer3 level. Thats why if the address is reachable from the Dude, you will see the same information as if the would be directly connected. This is good for us as we configured port forwarding o...
by eriitguy
Sun Jan 07, 2018 5:35 pm
Forum: The Dude
Topic: Dude server v.6 - not working with port forwarding
Replies: 33
Views: 3669

Re: Dude server v.6 - not working with port forwarding

erebusodora, Probably a some time is required to update information in the Dude from the clients. Anyway, you should change ROS port as you do it for Minyor or uncheck ''Router OS" and "Secure mode" for all ROS devices behind NAT. Also, please be aware that username and password are valid for all th...
by eriitguy
Sun Jan 07, 2018 3:42 pm
Forum: The Dude
Topic: Dude server v.6 - not working with port forwarding
Replies: 33
Views: 3669

Re: Dude server v.6 - not working with port forwarding

erebusodora, may you also verify ''Router OS" and "Secure mode" checkbox - probably they are disabled for this device.
P.S: Now I find that ObA device in pictures is missing!!! . In DUde -client MAP the OBA device is there but in server is missing !!! .... strangely

Thank you!
by eriitguy
Sun Jan 07, 2018 2:17 pm
Forum: The Dude
Topic: Dude server v.6 - not working with port forwarding
Replies: 33
Views: 3669

Re: Dude server v.6 - not working with port forwarding

pe1chl, we may have similar situation in mixed environment and it should work anyway.


Thank you!
by eriitguy
Sun Jan 07, 2018 2:13 pm
Forum: The Dude
Topic: Dude server v.6 - not working with port forwarding
Replies: 33
Views: 3669

Re: Dude server v.6 - not working with port forwarding

Hello, erebusodora! Thank you for provided screens! From them we see that all ROS devices behind NAT have similar information: Resources, Routerboard and Health tab. Do they are similar devices and have same uptime? We may start to find an issue from Minyor, because here you noticed only one issue -...
by eriitguy
Sat Jan 06, 2018 3:49 pm
Forum: The Dude
Topic: Dude server v.6 - not working with port forwarding
Replies: 33
Views: 3669

Re: Dude server v.6 - not working with port forwarding

erebusodora, thank you for detailed information! Yes, from information you provided it seems that an issue exist. May I ask you about ROS Winbox access to the Minyor device? Does it is accessible via default 8291 port or it is NAT'ed also to the different port? And if checkbox 'Router OS' and 'Secur...
by eriitguy
Fri Jan 05, 2018 5:25 pm
Forum: The Dude
Topic: [BUG] Images and icons disapearing
Replies: 22
Views: 3538

Re: [BUG] Images and icons disapearing

benjamimgois, in my case custom files also stored in the 'dude/files' directory - but default images stored in different one: Dude-v6-ROS-x86-Dude-custom-images-location.png As described in the Wiki : 2. File that were previously generated by server like default mibs/images/etc on first server start...
by eriitguy
Fri Jan 05, 2018 3:31 pm
Forum: The Dude
Topic: [BUG] Images and icons disapearing
Replies: 22
Views: 3538

Re: [BUG] Images and icons disapearing

benjamimgois, thank you for refinement!

May you please specify your custom files location?


Thank you!
by eriitguy
Fri Jan 05, 2018 3:24 pm
Forum: The Dude
Topic: 10Gbps link showing 4.29Gbps on dude
Replies: 4
Views: 963

Re: 10Gbps link showing 4.29Gbps on dude

Hello, vijaykumaryadav4u!

Maybe topic, Problem SNMP speed interface, will explain something.


Thank you!
by eriitguy
Fri Jan 05, 2018 11:43 am
Forum: The Dude
Topic: [BUG] Images and icons disapearing
Replies: 22
Views: 3538

Re: [BUG] Images and icons disapearing

Hello benjamimgois, horzam! I just tried to reproduce the issue but currently it is not reproducible: 1. Download ROS 6.41 x86 - https://mikrotik.com/download 2. Install it inside VirtualBox - Linux, Other Linux (64-bit), VDI - 128 MB, dude package is selected in process of installation - https://wi...
by eriitguy
Thu Jan 04, 2018 6:05 pm
Forum: The Dude
Topic: Dude server v.6 - not working with port forwarding
Replies: 33
Views: 3669

Re: Dude server v.6 - not working with port forwarding

Hello , eriitguy In my case I have 30 board behind NAT. The schema you showed is just one board . In my case, the information from the boards behind NAT is mixed with other boards behind the NAT. Put two more boards behind NAT and try to see. erebusodora, I just tested more complex configuration . ...
by eriitguy
Thu Jan 04, 2018 5:55 pm
Forum: The Dude
Topic: Feature request - Specify custom SNMP port for the device [SOLVED]
Replies: 3
Views: 1192

Re: Feature request - Specify custom SNMP port for the device [SOLVED]

Hello!

A more complex configuration was verified in test environment:
Dude-v6-Specify-custom-SNMP-port-08-Multiple-devices-Diagram.png
Dude-v6-Specify-custom-SNMP-port-09-Multiple-devices-Custom-SNMP-profile.png
Dude-v6-Specify-custom-SNMP-port-10-Multiple-devices-Devices.png

Thank you!
by eriitguy
Thu Jan 04, 2018 9:28 am
Forum: The Dude
Topic: [BUG] Images and icons disapearing
Replies: 22
Views: 3538

Re: [BUG] Images and icons disapearing

horzam, no. We don't have similar issue - we use Dude on CHR without data lost. Hello, honzam! May you show what is shown inside Map settings after disappearance? You have the same problem? Backround = none I just want to identify the issue more precise in order to address it to support. In the topi...
by eriitguy
Wed Jan 03, 2018 2:31 pm
Forum: The Dude
Topic: Adding RouterOS device with no default port , adding images problem
Replies: 4
Views: 1229

Re: Adding RouterOS device with no default port , adding images problem

Hello, Sinan!

It was verified in test environment that this solution works: Specify custom Winbox port for ROS device in Dude.

During verification we found some issue and reported it to Mikrotik support.


Thank you!
by eriitguy
Wed Jan 03, 2018 2:09 pm
Forum: The Dude
Topic: Specify custom Winbox port for ROS device in Dude
Replies: 1
Views: 2164

Specify custom Winbox port for ROS device in Dude

Hello! In order to add a ROS device with custom Winbox port in Dude, we may: 1. Device --> Right click --> Settings --> Services --> + Probe: routeros management Probe Port: Custom Winbox port --> Ok Dude-v6-Specify-custom-Winbox-port-for-ROS-device.png Thank you! Related forum posts 1. Change Winbo...
by eriitguy
Wed Jan 03, 2018 11:29 am
Forum: The Dude
Topic: [BUG] Images and icons disapearing
Replies: 22
Views: 3538

Re: [BUG] Images and icons disapearing

Hello, honzam!

May you show what is shown inside Map settings after disappearance?


Thank you!
by eriitguy
Tue Jan 02, 2018 6:43 pm
Forum: The Dude
Topic: Dude server v.6 - not working with port forwarding
Replies: 33
Views: 3669

Re: Dude server v.6 - not working with port forwarding

Hello, erebusodora!

I just tested CHR with forwarded SNMP port in the test environment and it working fine.


Thank you!
by eriitguy
Tue Jan 02, 2018 6:41 pm
Forum: The Dude
Topic: Feature request - Specify custom SNMP port for the device [SOLVED]
Replies: 3
Views: 1192

Re: Feature request - Specify custom SNMP port for the device [SOLVED]

Hello! This approach was verified in test environment: Dude-v6-Specify-custom-SNMP-port-03-Diagram.png Dude-v6-Specify-custom-SNMP-port-04-Custom-SNMP-profile.png Dude-v6-Specify-custom-SNMP-port-05-SNMP-Tab.png Dude-v6-Specify-custom-SNMP-port-06-Snmpwalk.png Dude-v6-Specify-custom-SNMP-port-07-Dev...
by eriitguy
Tue Jan 02, 2018 3:02 pm
Forum: The Dude
Topic: Feature request - Credentials profiles for Discovery
Replies: 3
Views: 963

Feature request - Credentials profiles for Discovery

Dear Mikrotik Team, Please review a possibility to define a credentials profiles for Discovery: 1. SNMP profiles - multiple SNMP profiles may be assigned for Discovery. 2. Password profiles - multiple Password profiles may be assigned for Discovery. If no SNMP or Password profile defined during Disc...
by eriitguy
Tue Jan 02, 2018 3:00 pm
Forum: The Dude
Topic: Feature request - Default Password profile for the Map
Replies: 0
Views: 399

Feature request - Default Password profile for the Map

Dear Mikrotik team, Please review a possibility to add a default Password profile for the Map, like this currently is done for Polling. This may help to change Password settings in few clicks for multiple devices on the Map. Thank you! Related feature request 1. Feature Request - Password Profile to...
by eriitguy
Tue Jan 02, 2018 2:38 pm
Forum: The Dude
Topic: Simple Dude Discovery Question - pls help.
Replies: 2
Views: 614

Re: Simple Dude Discovery Question - pls help.

Hello! I also can't find a way to define a "User Name/Password" for Discovery. Feature request was created for this: Feature request - Credentials profiles for Discovery . As a workaround we may mass change devices properties: 1. Map --> Select multiple ROS devices --> Right click --> Settings. 2. F...
by eriitguy
Thu Dec 21, 2017 4:42 pm
Forum: RouterBOARD hardware
Topic: New hardware - mAP
Replies: 154
Views: 51313

Re: New hardware - mAP

Hello, mikrotik team!

Please consider the following request for next upgrade of mAP:
1. Embedded LTE with SIM slot
2. 32 MB of storage
3. USB type C


Thank you!
by eriitguy
Tue Dec 12, 2017 1:45 pm
Forum: The Dude
Topic: Can Not Connect Via The Dude After Installation
Replies: 4
Views: 1710

Re: Can Not Connect Via The Dude After Installation

drakabelkabeldrag,

Dude v6 is a ROS package which should be installed into ROS: Manual:The_Dude_v6/Installation.
Did you install Dude on your ROS?


Thank you!
by eriitguy
Fri Dec 08, 2017 1:29 pm
Forum: The Dude
Topic: dude for router ccr
Replies: 2
Views: 902

Re: dude for router ccr

Hello, tomislav91!

Like was already mentioned by Shadeofspirit:
1. Go to download page https://mikrotik.com/download
2. Choice your platform.
3. Choice your ROS version.
4. Download appropriate Dude server package.
Dude-Server-package-for-CCR-01.png

Thank you!
by eriitguy
Mon Dec 04, 2017 8:56 am
Forum: The Dude
Topic: Dude v6 - Missing features from earlier versions
Replies: 11
Views: 1996

Re: Dude v6 - Missing features from earlier versions

Hello!

It seems that one more feature was removed from Dude v6: Export Map interval


Thank you!
by eriitguy
Sat Dec 02, 2017 9:59 am
Forum: The Dude
Topic: Outbound Port 25
Replies: 1
Views: 696

Re: Outbound Port 25

Hello, jwityshyn! Probably you may get more replies if you will move your post to different forums: Beginner Basics or General , here people discussing Dude monitoring tool. On these forums you may find similar questions and maybe will find a solution. If you say that you receive incoming mails, thi...
by eriitguy
Fri Dec 01, 2017 4:48 pm
Forum: Announcements
Topic: v6.41rc [release candidate] is released! New bridge implementation!
Replies: 561
Views: 123682

Re: v6.41rc [release candidate] is released! New bridge implementation!

Hello!

Maybe a force backup creation before update with notification about such behavior in changelog?


Thank you!
by eriitguy
Tue Nov 28, 2017 9:18 am
Forum: The Dude
Topic: RB750r2 MIPS-BE Dude Capable?
Replies: 3
Views: 863

Re: RB750r2 MIPS-BE Dude Capable?

Hello, ShowMeGuy! It seems that accordingly to the Wiki information, System_requirements_for_server_package : Hardware: Tile - CCR series hardware ARM - RB3011, RB1100AHx4 Dude Edition (RB1100Dx4) mmips - hEX (RB750Gr3) RouterOS x86 installations RouterOS CHR environment mmips - hEX (RB750Gr3) is co...
by eriitguy
Mon Nov 27, 2017 12:50 pm
Forum: The Dude
Topic: new to dude
Replies: 4
Views: 767

Re: new to dude

anyone???
Hello, mcnick50!
As a workaround the following steps may be used:

1. Dude --> Device --> Settings --> Custom Field 1 --> Your device port --> Ok
2. Dude --> Tools --> Web --> "[DeviceType.Url]":[Device.CustomField1] --> Ok


Thank you!
by eriitguy
Mon Nov 27, 2017 10:43 am
Forum: The Dude
Topic: Is the new dude production stable now ?
Replies: 7
Views: 1294

Re: Is the new dude production stable now ?

Hello, steen! We started to use Dude v6 and generally it is very stable. Some issues exists, but some of them are not critical. ESXi 6.x on SAN. ROS 6.39.1 for CHR, uptime 175d. We have for about 10 maps with 250+ devices. Ping, SNMP and TCP probes. 1. Is Dude 6 ready for prime time? 2. Optimal hard...
by eriitguy
Thu Nov 23, 2017 9:43 am
Forum: General
Topic: Sierra Wireless AirCard 320U - LTE mode
Replies: 21
Views: 7566

Re: Sierra Wireless AirCard 320U - LTE mode

1. May we buy it on Ebay without any issue?
2. Where may we get latest version of firmware in order to get it working with Mikrotik in Direct IP mode?
Mikrotik RouterOS - Sierra Wireless Netgear AirCard 320U 4G LTE Modem support


Thank you!
by eriitguy
Tue Nov 21, 2017 9:23 am
Forum: The Dude
Topic: Interface Change Speed
Replies: 1
Views: 360

Re: Interface Change Speed

Good evening, is there any way to monitor the status of an interface? I wish Dude would alert me when the speed of the door is changed. Hello, admskill! May some of these topics may be usefully for you: 1. Norification if speed on a link drops 2. Event interface half-duplex 3. Monitor Interface Sta...
by eriitguy
Tue Nov 21, 2017 9:16 am
Forum: The Dude
Topic: Dude v6 - Missing features from earlier versions
Replies: 11
Views: 1996

Re: Dude v6 - Missing features from earlier versions

Thank you eriitguy for your verification! I'm sorry I am wrong (I certainly do not remember well), maybe I selected all the hosts on a map and then edited with a one-click the snmp configuration for all of them. Anyway I am glad that it could be an idea worthy of a feature request ! But do not ask ...
by eriitguy
Tue Nov 21, 2017 9:14 am
Forum: The Dude
Topic: Feature request - Default SNMP profile for the Map
Replies: 2
Views: 832

Feature request - Default SNMP profile for the Map

Dear Mikrotik team,

Please review a possibility to add a default SNMP profile for the Map, like this currently is done for Polling.

This may help to change SNMP settings in few clicks for multiple devices on the Map.


Thank you!

----
Feature request list for Dude v6
by eriitguy
Sat Nov 18, 2017 5:29 pm
Forum: The Dude
Topic: Dude v6 - Missing features from earlier versions
Replies: 11
Views: 1996

Re: Dude v6 - Missing features from earlier versions

I miss also another feature. In the Dude v4 I remember that you could set snmp settings for each network map indipendently. Sometimes I want to completely stop the snmp checks on all the device of a specific map, and before I could do it through the map setting (snmp set to no-snmp), but now it see...
by eriitguy
Sat Nov 18, 2017 5:09 pm
Forum: The Dude
Topic: Dude v6 - Missing features from earlier versions
Replies: 11
Views: 1996

Re: Dude v6 - Missing features from earlier versions

Hi dear, thank you for your kind answer! I am not so expert, but I don't think it is the same. The old "execute" function was able to catch the output of the batch so that you could treat it as an array of string and get the one in the position you specified. The execute notification you suggest se...
by eriitguy
Fri Nov 17, 2017 9:18 am
Forum: The Dude
Topic: how to get device list from dude?
Replies: 4
Views: 899

Re: how to get device list from dude?

ok I can see it but cant get it.
when we have abous 10k devices list loads very slow via webfig
what about api, dear Mikrotik Team?
In 4beta3 it can be done by using web server.
How did you get this in Dude 4?

Feature request - Accessibility of Dude data via SNMP and API


Thank you!
by eriitguy
Fri Nov 17, 2017 9:14 am
Forum: The Dude
Topic: Dude - Web Client
Replies: 2
Views: 1162

Re: Dude - Web Client

Hi, Is there an option to view network maps on a web browser? We bought some TVs to view some dashboards (Zabbix / PRTG / Management Software / etc.). They only work with web browsers, do not allow to download app (like remote desktop feature). The only way we found to view dude on one of these TVs...
by eriitguy
Thu Nov 16, 2017 12:08 pm
Forum: The Dude
Topic: Dude v6 - Missing features from earlier versions
Replies: 11
Views: 1996

Re: Dude v6 - Missing features from earlier versions

I miss the "Execute" function that on Dude v4 allowed me to launch Windows batch commands and get the output to use it into another user-defined function as the one below Function : check_poe Code: if((array_element(execute("checkpoe.bat",device_property("FirstAddress"),"E:\\Batch\\"),1)="deny"),(a...
by eriitguy
Wed Nov 15, 2017 3:34 pm
Forum: The Dude
Topic: Dude 6 backup fails (6.40.5)
Replies: 5
Views: 683

Re: Dude 6 backup fails (6.40.5)

Hello, gcser!

In my case all working fine:
Dude-v6-Export-db-01.png

Thank you!
by eriitguy
Tue Nov 14, 2017 12:35 pm
Forum: The Dude
Topic: how to get device list from dude?
Replies: 4
Views: 899

Re: how to get device list from dude?

Hello, alexspils!

You may try to see device like in earlier Dude, via Web:
WebFig --> Dude --> Devices


Thank you!
by eriitguy
Tue Nov 14, 2017 10:50 am
Forum: The Dude
Topic: Dude Outage time and Service down time
Replies: 0
Views: 1199

Dude Outage time and Service down time

Hello! Dude have an Outages tab, where we may see: Dude-Outages-duration-and-Service-down-duration-01.png Status : Outage state Time : When the outage start Duration : How long does outage is last Service : Failed service By using this information we should be aware about polling settings: Probe Int...
by eriitguy
Fri Nov 10, 2017 4:30 pm
Forum: The Dude
Topic: Problems to display OIDs values
Replies: 2
Views: 544

Re: Problems to display OIDs values

Hi, I'm having problems trying to display the OIDs values through labels. I can see all the MIB's OIDs using the SNMP Walk, yet when I edit the label in the Appearance options of the network map element, it hasn't display anything. For example, the OID "3.6.1.4.1.41112.1.6.1.2.1.6.0" or "iso.org.do...
by eriitguy
Wed Nov 08, 2017 9:43 am
Forum: Announcements
Topic: v6.40.5 [current]
Replies: 82
Views: 25252

Re: v6.40.5 [current]

Hello, c400!
Is there anybody who will guide me through the process?
May you try to follow steps from this video https://www.youtube.com/watch?v=GIijZ6_i55g in order to Netinstall your device?


Thank you!
by eriitguy
Tue Nov 07, 2017 4:27 pm
Forum: The Dude
Topic: Mass command execution
Replies: 6
Views: 2284

Re: Mass command execution

Thanks for answer :) But still i dont know how to run mass command execute ie. /system identity set name= pikpik, I don't know how this may be done from Dude. On the forum you may find some information about this: 1. Configurable solution to automatically backup Mikrotik's routinely? 2. Script to l...
by eriitguy
Tue Nov 07, 2017 3:00 pm
Forum: The Dude
Topic: Mass command execution
Replies: 6
Views: 2284

Re: Mass command execution

Hello, How can i massively execute command via Dude on devices (RouterOS) ? I need to upgrade firmware (bios) on 1000+ devices. It is possieble ? Hello, pikpik! You may start from the following topics: 1. Feature request RouterBOARD upgrade mechanism 2. Easy way to mass upgrade firmware? 3. Multipl...
by eriitguy
Mon Nov 06, 2017 9:10 am
Forum: The Dude
Topic: Adding Winbox Tool
Replies: 26
Views: 14098

Re: Adding Winbox Tool

Trisc,

May you try to copy winbox.exe to the Dude client folder?
In such case you probably might be able to add Winbox tool without full path.

If this will work, all you Dude client should do the same.


Thank you!
by eriitguy
Mon Nov 06, 2017 9:06 am
Forum: The Dude
Topic: Dude causes monitored networks to be erratic and slow
Replies: 2
Views: 522

Re: Dude causes monitored networks to be erratic and slow

yonnie,

May you disable Dude on your 750gr3 to see is something changes?


Thank you!
by eriitguy
Mon Nov 06, 2017 9:04 am
Forum: The Dude
Topic: Any trick to generate cert for the dude?
Replies: 1
Views: 329

Re: Any trick to generate cert for the dude?

seanwg, If I understand correctly, at the moment we have two possibilities to connect to the Dude. 1. Dude Windows client. 2. ROS Webfig. Dude Windows client uses Winbox port and should be secured by itself. You also may specify "secure" during connection. ROS Webfig may be accessed via HTTP or HTTP...
by eriitguy
Mon Nov 06, 2017 8:59 am
Forum: The Dude
Topic: Problems with The Dude [SOLVED]
Replies: 4
Views: 826

Re: Problems with The Dude [SOLVED]

wegface,

As sid5632 mentioned, starting from v6.37 Dude uses Winbox port. By default this is 8291.

On which port your Winbox is listening?
/ip service print

Thank you!
by eriitguy
Thu Nov 02, 2017 5:29 pm
Forum: The Dude
Topic: Logs, logs, logs
Replies: 8
Views: 1278

Re: Logs, logs, logs

Mackiavelly,

A request was created and we are waiting to be implemented: Feature request - Multiple logs instances.

Task you trying to accomplish may be easy done via Kiwi Syslog.
Rule 1 - Syslog
Rule 2 - Device up
Rule 3 - Device down


Thank you!
by eriitguy
Thu Nov 02, 2017 11:26 am
Forum: Announcements
Topic: MikroTik used by Amazon in their cloud datacenters
Replies: 34
Views: 18074

Re: MikroTik used by Amazon in their cloud datacenters

Sadly, it looks like the footage was probably all from inside the Raging Wire data center and not an AWS data center. It was still good to see it being used though. Ragingwire is part of NTT, they are data center operator and they are in business of leasing data center space and infrastructure to c...
by eriitguy
Thu Nov 02, 2017 10:25 am
Forum: The Dude
Topic: Dude 6.40 changelog ?
Replies: 12
Views: 2036

Re: Dude 6.40 changelog ?

normis,

But we periodically get only up notifications for some devices, which may confuse us: Ticket#2017052022000551.

Dude v6 - Dependencies - How does it work?

If you heave a time and possibility, please look on it.


Thank you!
by eriitguy
Thu Nov 02, 2017 10:10 am
Forum: The Dude
Topic: Dude v6 - Dependencies - How does it work?
Replies: 6
Views: 1814

Re: Dude v6 - Dependencies - How does it work?

Video with demonstration of the related issue: https://www.youtube.com/watch?v=ihuW-J-SV5M Ticket#2017052022000551 Reply from support: Seems like the issue happens with child device, in case when status changes from Unknown => Down. In this case notifications reports only status "Down" to "Up". Step...
by eriitguy
Thu Nov 02, 2017 9:22 am
Forum: The Dude
Topic: help me e-mail notification on dude
Replies: 1
Views: 379

Re: help me e-mail notification on dude

hello everyone..

i have some problem..

i using dude.. testing e-mail notification..

but error has come TT

help me
Hello, lim!

It seems that some solutions was already posted in you recent forum topic: hi everyone i have some problem.. e-mail notification


Thank you!
by eriitguy
Wed Nov 01, 2017 2:45 pm
Forum: The Dude
Topic: hi everyone i have some problem.. e-mail notification
Replies: 1
Views: 405

Re: hi everyone i have some problem.. e-mail notification

Hello, lim! From the screenshot you provided we may assume that you use Windows version of the Dude and Email notification via Gmail using blat. You may see how it may be configured in the following forum topic: Dude - Email notification through Gmail on Windows - via blat . As blat doesn't support ...
by eriitguy
Tue Oct 31, 2017 4:49 pm
Forum: The Dude
Topic: Dude v6 - Feature request list
Replies: 66
Views: 17968

Re: Feature request list for Dude v6

In the map view add device comments and some notification mark that shows that comments are added, what you can see when you move mouse over - like comments in MS excel for example!! Sometimes it is necessary to comment some configuration if you noticed some problems or give some comment about conf...
by eriitguy
Mon Oct 30, 2017 10:20 am
Forum: The Dude
Topic: How to add Device to Dude server with port
Replies: 4
Views: 1553

Re: How to add Device to Dude server with port

jamecollins,

In your case you want that Dude access your ROS with non default port. You may try to follow guide in the following forum topic: Adding RouterOS device with no default port , adding images problem


Thank you!
by eriitguy
Mon Oct 30, 2017 10:08 am
Forum: The Dude
Topic: Dude 4.03beta3 SNMP export to file
Replies: 4
Views: 595

Re: Dude 4.03beta3 SNMP export to file

Hamit, The easiest way is to use snmpwalk for the list of devices. Then you may use diff and in case of changes send an Email notifications. From Dude side you may to try to configure a probe, something like "Check device serial number". Probe Thread Thank you! And to send somehow the data in a fil...
by eriitguy
Sun Oct 29, 2017 9:44 am
Forum: The Dude
Topic: DUDE on Routerboard-Setting binding IP
Replies: 1
Views: 591

Re: DUDE on Routerboard-Setting binding IP

complete2006, Probably that currently is not possible to specify on which IP of the ROS Dude should listen its service. By default it will be accessible on all ROS interfaces and you may limit this using firewall. Outgoing connection will be made using routing table and corresponding ROS IP address....
by eriitguy
Fri Oct 27, 2017 5:52 pm
Forum: The Dude
Topic: Dude 4.03beta3 SNMP export to file
Replies: 4
Views: 595

Re: Dude 4.03beta3 SNMP export to file

Hamit,

The easiest way is to use snmpwalk for the list of devices. Then you may use diff and in case of changes send an Email notifications.

From Dude side you may to try to configure a probe, something like "Check device serial number".
Probe Thread


Thank you!
by eriitguy
Fri Oct 27, 2017 1:40 pm
Forum: The Dude
Topic: Dude server v.6 - not working with port forwarding
Replies: 33
Views: 3669

Re: Dude server v.6 - not working with port forwarding

Maybe a Dude agent might help here? Thank you! CRS1xx, CRS2xx, DISC, LDF, LHG, NetBox, NetMetal, PowerBox, QRT, RB9xx, hAP, hAP ac, hAP ac lite, mANTBox, mAP, RB4xx, cAP, hEX, wAP, BaseBox, DynaDish, RB2011, SXT, OmniTik, Groove, Metal, Sextant, RB7xx don not have a Dude server/agent packages. This...
by eriitguy
Fri Oct 27, 2017 1:13 pm
Forum: The Dude
Topic: Feature request - Specify custom SNMP port for the device [SOLVED]
Replies: 3
Views: 1192

Feature request - Specify custom SNMP port for the device [SOLVED]

Dear Mikrotik team, Please review a possibility to specify a custom SNMP port for the device. In current Dude implementation it may get SNMP data without specifying a port and it seems that it uses a default,161 UDP port. In some cases device maybe behind the NAT and we may configure a port forwardi...
by eriitguy
Fri Oct 27, 2017 1:03 pm
Forum: The Dude
Topic: How to add Device to Dude server with port
Replies: 4
Views: 1553

Re: How to add Device to Dude server with port

jamecollins,

If I understand correctly, port you are trying to specify is used only for SNMP.
Any another device probes are added inside a "Services" tab.

Dude support this in the way described in the next post.


Thank you!
by eriitguy
Fri Oct 27, 2017 9:37 am
Forum: The Dude
Topic: Error installing Dude Client
Replies: 3
Views: 551

Re: Error installing Dude Client

Dude v6 6.39.3 (Bugfix only): https://download2.mikrotik.com/routeros/6.39.3/dude-install-6.39.3.exe dude-install-6.39.3.exe.sha256 7a8ee9e67c5977f90c5316450ad2be50c5fb0976f30ab6fbb434f85f85561d23 *dude-install-6.39.3.exe 6.40.4 (Current): https://download2.mikrotik.com/routeros/6.40.4/dude-install...
by eriitguy
Fri Oct 27, 2017 9:20 am
Forum: The Dude
Topic: Feature request - Accessibility of Dude data via SNMP and API
Replies: 0
Views: 607

Feature request - Accessibility of Dude data via SNMP and API

Dear Mikrotik team, Please review a possibility to add accessibility of Dude data via SNMP and API. This may be usefully for integration of the Dude with another applications. Thank you! Related forum topics 1. Dude API. Need to extract info 2. Dude Roadmap - API? 3. Database/API Documentation 4. Pr...
by eriitguy
Thu Oct 26, 2017 4:47 pm
Forum: The Dude
Topic: Problem importing backup from 4.0 Beta 3
Replies: 4
Views: 561

Re: Problem importing backup from 4.0 Beta 3

rodriguescr,

If I understand correctly, agent should be specified as a regular device. What do you see under your devices Settings?
Dude-v6-Device-settings-Agent-01.png
by eriitguy
Thu Oct 26, 2017 2:10 pm
Forum: The Dude
Topic: Problem importing backup from 4.0 Beta 3
Replies: 4
Views: 561

Re: Problem importing backup from 4.0 Beta 3

Hi, I'm trying to import from our old dude server, that is monitoring about a 1000 hosts with various services, the problem is we use some agents spreaded across our network, and as Dude V6 doesn't support agents anymore, the hosts that are using other agent then the default one are being imported ...
by eriitguy
Wed Oct 25, 2017 9:32 am
Forum: The Dude
Topic: Probe Dude Probes question - maybe feature request? :-}
Replies: 3
Views: 579

Re: Probe Dude Probes question - maybe feature request? :-}

meverest, Something similar may be achieved by using Feature request - Sending Reports . If that feature request will be implemented we may than will be able to list all devices on the map and their state. Maybe something like this: [NetMap.ProbesDownList] [NetMap.ProbesDownCount] should be added in...
by eriitguy
Tue Oct 24, 2017 3:08 pm
Forum: The Dude
Topic: CRS326-24G-2S+RM
Replies: 4
Views: 1101

Re: CRS326-24G-2S+RM

bo1337,
You may look at What Mikrotik router support TheDude?


Thank you!
by eriitguy
Tue Oct 24, 2017 11:12 am
Forum: The Dude
Topic: Dude 6.40 changelog ?
Replies: 12
Views: 2036

Re: Dude 6.40 changelog ?

normis , Recently, an issue was addressed to the support and we got a reply. I don't know which Criticity level on it - Ticket#2017052222001251. Sometime it may be like a closed eyes. And currently we didn't get a practical issue with it. Dude v6 - Dependencies - How does it work? If you heave a ti...
by eriitguy
Tue Oct 24, 2017 11:01 am
Forum: The Dude
Topic: Dude v6 - Dependencies - How does it work?
Replies: 6
Views: 1814

Re: Dude v6 - Dependencies - How does it work?

Video with demonstration of the issue: https://www.youtube.com/watch?v=PyCB0rsLP_c

Ticket#2017052222001251

Reply from support:
Reply about the notificatios sent on ticket #2017052022000551
by eriitguy
Tue Oct 24, 2017 10:34 am
Forum: The Dude
Topic: Feature request - Full featured Web access
Replies: 3
Views: 1686

Feature request - Full featured Web access

Dear Mikrotik team, Please review a possibility to provide a full featured Web access support to the Dude. As it currently done via Webfig it should be updated to permit us: 1. Configurable access to all Dude elements. For example, currently is not possible to restrict access to only one map. 2. Pos...
by eriitguy
Mon Oct 23, 2017 5:33 pm
Forum: The Dude
Topic: Feature request - Multiple logs instances
Replies: 1
Views: 760

Feature request - Multiple logs instances

Dear Mikrotik team, Please review a possibility to add multiple separate log instances, like it was in earlier Dude versions. This may help us to log different events in appropriate instance in order to group them. [attachment=0]Dude-v6-Feature-request-Multiple-logs-instances-20171023-01.png[/attach...
by eriitguy
Mon Oct 23, 2017 1:35 pm
Forum: The Dude
Topic: Feature request - Add Existing device to the map
Replies: 1
Views: 709

Feature request - Add Existing device to the map

Dear Mikrotik team, Please review a possibility to add Existing device to the another or same map. For example: We may have a main map with all our devices and some of them may be added to another maps/submaps in order to maintain topology. In such case we should be able to do: + --> Add Existing de...
by eriitguy
Fri Oct 20, 2017 10:32 am
Forum: The Dude
Topic: Feature request - Add easy configurable basic probes
Replies: 0
Views: 468

Feature request - Add easy configurable basic probes

Dear Mikrotik team, Please review a possibility to add easy configurable basic probes, like: 1. Ping 2. Trace 3. URL 4. HTTP 5. Certificate expiration 6. Domain expiration 7. SMTP 8. IMAP 9. Mail relay 10. TCP 11. UDP 12. NTP 13. DNS 14. DHCP 15. LDAP 16. RADIUS 17. CPU Load 18. Memory usage 19. Dis...
by eriitguy
Fri Oct 20, 2017 10:14 am
Forum: The Dude
Topic: Feature request - Add WMI support
Replies: 0
Views: 507

Feature request - Add WMI support

Dear Mikrotik team,

Please review a possibility to add WMI support in the Dude in order to be able to get more monitoring data from Windows hosts.

Already requested on the forum
1. Feature request:WMI
2. wmi
3. Does the dude support WMI?

----
Feature request list for Dude v6
by eriitguy
Thu Oct 19, 2017 10:57 am
Forum: The Dude
Topic: Feature request - Sending Reports
Replies: 4
Views: 1259

Re: Feature request - Sending Reports

Network Map --> Outages shown also devices which is in a Asked state too. In such case it seems that this is not very useful to get Up/Dow devices list.

Thank you!
by eriitguy
Thu Oct 19, 2017 10:53 am
Forum: The Dude
Topic: Feature request - Add Notes to Outages
Replies: 0
Views: 416

Feature request - Add Notes to Outages

Dear Mikrotik team, Please review a possibility to return Outages Notes as they were in Dude v3.6: [attachment=0]Dude-v6-Feature-request-Add-Notes-to-Outages.png[/attachment] It may be useful in Notifications, Appearance and for history purpose to note cause of appeared outage. Thank you! Related fe...
by eriitguy
Wed Oct 18, 2017 3:04 pm
Forum: The Dude
Topic: Graph doesn't show traffic above ~500 Mbps
Replies: 1
Views: 395

Re: Graph doesn't show traffic above ~500 Mbps

tomasi,

We have some links with traffic above 500Mbit/s:
Dude-v6-Chart-Traffic-above-500-Mbitps.png
Thank you!
by eriitguy
Wed Oct 18, 2017 1:54 pm
Forum: The Dude
Topic: Feature request - Possibility to view Notifications assignment
Replies: 0
Views: 407

Feature request - Possibility to view Notifications assignment

Dear Mikrotik team, Pleas review a possibility to view Notifications assignment. We may have multiple notifications configured and before modifying or deleting them it will be usefully to see to which devices they are assigned. In case of simple deletion we may leave some devices without notificatio...
by eriitguy
Wed Oct 18, 2017 11:14 am
Forum: Wireless Networking
Topic: Mikrotik and Huawei 3372 LTE modem - LTE Passtrough
Replies: 7
Views: 6369

Mikrotik and Huawei 3372 LTE modem - LTE Passtrough

Hello! Starting from RouterOS v6.41 Mikrotik have added LTE Passthrough feature which permit to apply IP configuration directly to the client device. We have made some tests using Huawei 3372h-153 modem from Moldcell carrier. Modem model /system resource usb print detail 2 device="1:2" vendor="HUAWE...
by eriitguy
Wed Oct 18, 2017 9:59 am
Forum: The Dude
Topic: Feature request - Sending Reports
Replies: 4
Views: 1259

Re: Feature request - Sending Reports

Maybe adding a "Network Map" in Dude CLI might help at the start? But something like this: [NetMap.DevicesCount] [NetMap.DevicesPartiallyDownCount] [NetMap.DevicesDownCount] [NetMap.DevicesDownList] [NetMap.DevicesUpList] [NetMap.DevicesAskedList] [NetMap.DevicesPartiallyDownList] [NetMap.DevicesUnk...
by eriitguy
Wed Oct 18, 2017 9:47 am
Forum: The Dude
Topic: Dude server v.6 - not working with port forwarding
Replies: 33
Views: 3669

Re: Dude server v.6 - not working with port forwarding

Maybe a Dude agent might help here?

Thank you!
by eriitguy
Wed Oct 18, 2017 9:37 am
Forum: General
Topic: Sierra Wireless AirCard 320U - LTE mode
Replies: 21
Views: 7566

Re: Sierra Wireless AirCard 320U - LTE mode

Reply from Mikrotik support: 3. This modem is not listed in the wiki page: https://wiki.mikrotik.com/wiki/Supported_Hardware#4G_LTE_cards_and_modems 4. This modem is not listed in the wiki page: https://wiki.mikrotik.com/wiki/Manual:Peripherals the modem might work in the RouterOS 5. May we get it w...
by eriitguy
Mon Oct 16, 2017 5:36 pm
Forum: General
Topic: ** WE WANT A LTE BRIDGE-MODE **
Replies: 80
Views: 22542

Re: ** WE WANT A LTE BRIDGE-MODE **

I got it working with rc44 but not the way I was thinking it will work. My laptop got IP from Huawei's LAN range (198.168.8.0/24). I thought it will get IP directly from ISP...
May you please provide a configuration which is working for you?


Thank you!
by eriitguy
Mon Oct 16, 2017 5:15 pm
Forum: The Dude
Topic: Feature request - Rename Notifications into Actions
Replies: 0
Views: 469

Feature request - Rename Notifications into Actions

Dear Mikrotik team, Please review a possibility to rename "Notifications" into "Actions". Currently, under "Notification" we may specify multiple actions, like: 1. beep 2. email 3. execute locally 4. execute on server 5. flash 6. group 7. log 8. popup 9. sound 10. speak 11. syslog All of them may be...
by eriitguy
Fri Oct 13, 2017 11:04 am
Forum: The Dude
Topic: Feature request - Notification Schedule - More granular time period
Replies: 0
Views: 395

Feature request - Notification Schedule - More granular time period

Dear Mikrotik team, Please review a possibility introduce more granular time period in Notifications Schedule. For example, currently it is not possible to define period less than 1 hour. As an interesting example Advanced Host Monitor may be used. Thank you! ---- Feature request list for Dude v6
by eriitguy
Fri Oct 13, 2017 10:40 am
Forum: The Dude
Topic: Feature request - Separate Schedule from Notifications
Replies: 0
Views: 372

Feature request - Separate Schedule from Notifications

Dear Mikrotik team, Please review a possibility to separate Schedule from Notifications. This may help us to configure/modify more easy Notifications. For example, currently we have multiple notifications with same actions and only Schedule is different: Dude-v6-Feature-requerst-Separate-Schedule-fr...
by eriitguy
Fri Oct 13, 2017 10:21 am
Forum: The Dude
Topic: Dude server-Linux standalone server?
Replies: 3
Views: 1145

Re: Dude server-Linux standalone server?

wtm,

We run Dude using CHR. ROS is not touched and don't used, just for user management.


Thank you!
by eriitguy
Wed Oct 11, 2017 3:44 pm
Forum: Announcements
Topic: v6.41rc [release candidate] is released! New bridge implementation!
Replies: 561
Views: 123682

Re: v6.41rc [release candidate] is released! New bridge implementation!

!) detnet - implemented "/interface detect-internet" feature; https://wiki.mikrotik.com/wiki/Manual:Detect_internet Is this feature feature optional if someone does not want their router to contact cloud.mikrotik.com every minute? Is it just cosmetic (ie: " this interface is 'WAN' just FYI ") or is...
by eriitguy
Wed Oct 11, 2017 3:38 pm
Forum: General
Topic: ** WE WANT A LTE BRIDGE-MODE **
Replies: 80
Views: 22542

Re: ** WE WANT A LTE BRIDGE-MODE **

Thanks for the info! We still can't get it working with 6.41rc44. Applied configuration: # # /system reset-configuration skip-backup=yes # /system logging add topics=lte # /interface lte apn print /interface lte apn add apn=profile1 passthrough-interface=ether3 /interface lte set lte1 apn=profile1 ...
by eriitguy
Tue Oct 10, 2017 6:10 pm
Forum: General
Topic: Sierra Wireless AirCard 320U - LTE mode
Replies: 21
Views: 7566

Re: Sierra Wireless AirCard 320U - LTE mode

Hello, everyone! We are planning to buy a Sierra Wireless AirCard 320U LTE modem in order to be able to get Public IP on the Mikrotik. Also it may be usefully to use it in LTE Passthrough mode. As we read on this thread, this may be done but some questions remain: 1. May we buy it on Ebay without an...
by eriitguy
Mon Oct 09, 2017 9:30 am
Forum: General
Topic: ** WE WANT A LTE BRIDGE-MODE **
Replies: 80
Views: 22542

Re: ** WE WANT A LTE BRIDGE-MODE **

matiaszon,

We have tried similar modem and get similar issue.
Mikrotik support replied that they found an issue and it was fixed in v6.41rc39. We are waiting this to be published in order to test it.


Thank you!
by eriitguy
Sun Oct 08, 2017 10:08 am
Forum: The Dude
Topic: Urgent! I need running the Dude in Windows 10
Replies: 4
Views: 1145

Re: Urgent! I need running the Dude in Windows 10

ams16,

1. What version of the Dude do you use?
2. To which port do you trying to connect?

Similar situation is mentioned here: Dude fresh install doesn' connect

Thank you!
by eriitguy
Thu Oct 05, 2017 3:51 pm
Forum: The Dude
Topic: Ping Switch TL-SG108E
Replies: 7
Views: 1098

Re: Ping Switch TL-SG108E

pwtinternet,

May you try to verify if Dude is able to ping them?
TL-SG108E --> Right click --> Tools --> ping

What are you seeing in the results?


Thank you!
by eriitguy
Tue Oct 03, 2017 6:14 pm
Forum: Announcements
Topic: v6.41rc [release candidate] is released! New bridge implementation!
Replies: 561
Views: 123682

Re: v6.41rc [release candidate] is released! New bridge implementation!

viewtopic.php?f=21&t=123936&start=100#p614799
If you see the same changelog entry in multiple rc versions then it is a new feature which is being implemented and changelog entry is simply moved up on each rc when additional work on it has been done.
Thank you!
by eriitguy
Tue Oct 03, 2017 5:55 pm
Forum: Announcements
Topic: v6.41rc [release candidate] is released! New bridge implementation!
Replies: 561
Views: 123682

Re: v6.41rc [release candidate] is released! New bridge implementation!

strods,

What is difference between earlier RC, for example:

What's new in 6.41rc38 (2017-Oct-03 11:51):
*) lte - added Passthrough support (CLI only);
What's new in 6.41rc31 (2017-Sep-20 06:56):
*) lte - added Passthrough support (CLI only);
by eriitguy
Tue Oct 03, 2017 11:40 am
Forum: Announcements
Topic: v6.41rc [release candidate] is released! New bridge implementation!
Replies: 561
Views: 123682

Re: v6.41rc [release candidate] is released! New bridge implementation!

normis, thank you for observation:
[admin@CHR] > /tool fetch url="https://httpstatuses.com/204"
      status: finished
  downloaded: 3KiBC-z pause]
    duration: 1s
It working as expected!
by eriitguy
Tue Oct 03, 2017 11:33 am
Forum: Announcements
Topic: v6.41rc [release candidate] is released! New bridge implementation!
Replies: 561
Views: 123682

Re: v6.41rc [release candidate] is released! New bridge implementation!

What's new in 6.41rc37 (2017-Oct-02 06:47): Changes since previous 6.41rc release: *) fetch - accept all HTTP 2xx status codes; Thank you for this fix! I don't know how it was planned but noticed that it failed at 204 status code: [admin@CHR] > /tool fetch url="http://httpstat.us/204" status: faile...
by eriitguy
Mon Oct 02, 2017 2:34 pm
Forum: General
Topic: tool fetch - 2xx HTTP response codes
Replies: 3
Views: 2073

Re: tool fetch - 2xx HTTP response codes

This was solved in the ROS 6.41rc37 What's new in 6.41rc37 (2017-Oct-02 06:47): *) fetch - accept all HTTP 2xx status codes; Now we may run fetch each after another, if web server return 202 and other 2xx status codes: /tool fetch url="http://httpstat.us/202" keep-result=no /tool fetch url="http://h...
by eriitguy
Wed Sep 27, 2017 9:43 am
Forum: The Dude
Topic: Proper way to backup and restore?
Replies: 2
Views: 611

Re: Proper way to backup and restore?

jmay,

Described a Dude v6 - Backup local solution.
It was verified that it may be used to copy all Dude maps to another instance.

Thank you!
by eriitguy
Tue Sep 26, 2017 4:03 pm
Forum: The Dude
Topic: Dude lost data
Replies: 15
Views: 2451

Re: Dude lost data

LifeDS, May you provide more details when issue is reproduced? For example: 1. Start VM with CHR. 2. After 24 hours - reboot ROS from Winbox. 3. After start all data is lost. I see that we have more that 100 days of uptime on our ESXi without any issue. Some time we reboot it. And also, once a week ...
by eriitguy
Tue Sep 26, 2017 1:41 pm
Forum: The Dude
Topic: dude big proplems cant connect
Replies: 2
Views: 470

Re: dude big proplems cant connect

ibr771,

May you try to install the latest version of the ROS and Dude?


Thank you!
by eriitguy
Wed Aug 30, 2017 1:22 pm
Forum: The Dude
Topic: Dude 6.40 changelog ?
Replies: 12
Views: 2036

Re: Dude 6.40 changelog ?

carnivean, It seems that currently Dude v6 development is postponed. The_Dude_v6/dude_v6.xx_changelog show us that last changes were made in v6.39 - 2017-Apr-27 10:06. ROS changelog shown only one Dude related changes after 6.39. Release 6.40 - What's new in v6.40 (2017-Jul-21 08:45): *) dude - fixe...
by eriitguy
Mon Aug 28, 2017 9:00 am
Forum: The Dude
Topic: Probe Thread
Replies: 324
Views: 224210

Re: Probe Thread

lebowski,

Thank you for help!
I have configured a function and probe per you recommendation. Now it look like this:
2017-08-28_084819.png
2017-08-28_084903.png
But I see multiple outages:
2017-08-28_084955.png
And my chart look like this:
2017-08-28_085542.png
by eriitguy
Thu Aug 24, 2017 9:17 am
Forum: General
Topic: ** WE WANT A LTE BRIDGE-MODE **
Replies: 80
Views: 22542

Re: ** WE WANT A LTE BRIDGE-MODE **

uldis,

No chance to manage it remotely then it physically is inaccessible, in another City for example?
We should be able to log in to verify or configure settings when something may be wrong.

Thank you!
by eriitguy
Tue Aug 22, 2017 12:34 pm
Forum: General
Topic: ** WE WANT A LTE BRIDGE-MODE **
Replies: 80
Views: 22542

Re: ** WE WANT A LTE BRIDGE-MODE **

uldis,

Another question, is it possible to assign second IP to wAP LTE itself in order to manage it?
by eriitguy
Tue Aug 22, 2017 10:35 am
Forum: General
Topic: ** WE WANT A LTE BRIDGE-MODE **
Replies: 80
Views: 22542

Re: ** WE WANT A LTE BRIDGE-MODE **

uldis, Thank you very much your team to this feature implementation! It may be very usefully in our case. Before starting to use it, we are looking how may we verify if LTE is working fine and pass the traffic? On recent solutions we using script like this: :local PINGCOUNT 5; :local PINGADDRESS "8....
by eriitguy
Mon Aug 21, 2017 8:00 am
Forum: The Dude
Topic: Monitor tcp connection on Window client
Replies: 1
Views: 393

Re: Monitor tcp connection on Window client

lelle, It seems that we may try to use the following algorithm: 1. Get list of connections on Windows Client. 2. Identify if exist a required connection is in ESTABLISHED state. 3. Verify if this connection it started by required application. 4. If p.3 not true - restart required service. 1., 2. Get...
by eriitguy
Mon Aug 21, 2017 6:58 am
Forum: The Dude
Topic: Dude fresh install doesn' connect
Replies: 7
Views: 1754

Re: Dude fresh install doesn' connect

Zod,
Did you tried this solution DUDE server cannot upgrade from pc?
by eriitguy
Sun Aug 20, 2017 4:39 pm
Forum: The Dude
Topic: Probe Thread
Replies: 324
Views: 224210

Re: Probe Thread

Hello, everyone! I'm trying to setup HP Procurve Cpu probe from the following post . Now I have configured: Function Name: Procurve_Cpu Code: oid("1.3.6.1.4.1.11.2.14.11.5.1.9.6.1.0") Probe Name: Procurve_Cpu Type: Function Available: Procurve_Cpu() <> "" Error: if(Procurve_Cpu() > 80, "", concatena...
by eriitguy
Thu Aug 17, 2017 1:33 pm
Forum: The Dude
Topic: Dude fresh install doesn' connect
Replies: 7
Views: 1754

Re: Dude fresh install doesn' connect

titansmc,

To what port do you trying to connect?


Thank you!
by eriitguy
Thu Aug 10, 2017 11:00 am
Forum: The Dude
Topic: Monitoring Linux server partition
Replies: 1
Views: 553

Re: Monitoring Linux server partition

jonasrita99,

It seems that you may start from Probe Thread


Thank you!
by eriitguy
Wed Aug 09, 2017 8:51 am
Forum: The Dude
Topic: Problem setting up email alerts for The Dude
Replies: 4
Views: 6282

Re: Problem setting up email alerts for The Dude

bhesterberg,

Maybe this guide may help you: Dude v6 - Email notification through Gmail

Thank you!
by eriitguy
Fri Aug 04, 2017 10:38 am
Forum: The Dude
Topic: the dude OID numbers
Replies: 1
Views: 519

Re: the dude OID numbers

by eriitguy
Fri Aug 04, 2017 10:28 am
Forum: The Dude
Topic: dude, critical queued bytes for write to db
Replies: 38
Views: 6247

Re: dude, critical queued bytes for write to db

bobney,

We use Dude v6 on ESXi without any issue.
Some bugs presents. We reported them and waiting to be fixed.

The Dude Alternatives
by eriitguy
Sun Jul 30, 2017 11:25 am
Forum: The Dude
Topic: Custom tools in Dude!
Replies: 16
Views: 4907

Re: Custom tools in Dude!

CR24,

Patch with spaces should be quoted:
"C:\Program Files\PuTTY\plink.exe" [Device.FirstAddress] -l [Device.UserName] -pw [Device.Password] "/system reboot"
by eriitguy
Sun Jul 30, 2017 1:10 am
Forum: The Dude
Topic: Custom tools in Dude!
Replies: 16
Views: 4907

Re: Custom tools in Dude!

CR24, 1. Download plink.exe https://www.chiark.greenend.org.uk/~sgtatham/putty/latest.html 2. Place it in desired location, for example in C:\Tools 3. Create a custom tool: C:\Tools\plink.exe [Device.FirstAddress] -l [Device.UserName] -pw [Device.Password] "/system reboot" You also may copy plink.ex...
by eriitguy
Sat Jul 29, 2017 11:48 pm
Forum: The Dude
Topic: Custom tools in Dude!
Replies: 16
Views: 4907

Re: Custom tools in Dude!

CR24,

Dude client should be able to run plink.exe, it should knot full path to it.
For more information, please see The_Dude_v6/Tools

Thank you!
by eriitguy
Sat Jul 29, 2017 11:43 pm
Forum: The Dude
Topic: The Dude 6.39.2 Log Files
Replies: 14
Views: 2764

Re: The Dude 6.39.2 Log Files

manuelm,

What do you mean by retention policy?

In Dude v6 a ROS logging system is used and we can't configure multiple logs with their policy.

One workaround is described above.

Thank you!
by eriitguy
Fri Jul 28, 2017 9:27 am
Forum: The Dude
Topic: Charts not displaying right scale [SOLVED]
Replies: 6
Views: 666

Re: Charts not displaying right scale [SOLVED]

apiel1,

May you try to create a Data Source manually like it is described in the forum post, "Create a chart" section?

Thank you!
by eriitguy
Fri Jul 28, 2017 9:22 am
Forum: The Dude
Topic: Custom tools in Dude!
Replies: 16
Views: 4907

Re: Custom tools in Dude!

CR24,
/system reboot
Command/Tool you defined is started on your local PC.

If you want to run a command on remote device from Dude, you may try:
plink.exe [Device.FirstAddress] -P 22 -l [Device.UserName] -pw [Device.Password] "/system reboot"
Thank you!
by eriitguy
Wed Jul 26, 2017 1:50 pm
Forum: The Dude
Topic: Charts not displaying right scale [SOLVED]
Replies: 6
Views: 666

Re: Charts not displaying right scale [SOLVED]

apiel1,

What version of the Dude do you use?

May you try to create a "Data Source" manually where you can specify % under Unit?

Thank you!
by eriitguy
Tue Jul 25, 2017 2:23 pm
Forum: The Dude
Topic: Charts not displaying right scale [SOLVED]
Replies: 6
Views: 666

Re: Charts not displaying right scale [SOLVED]

apiel1,

May you show us a Data Source of this chart?

Thank you!
by eriitguy
Tue Jul 25, 2017 2:21 pm
Forum: The Dude
Topic: Dude and external link
Replies: 1
Views: 400

Re: Dude and external link

Ikk, We can try to use a Tools and device Custom Fields for this. 1. Add a desired URL in the device properties: Settings --> CustomField1 --> your URL --> Ok 2. Add a new tool: Tools --> + Name: WebCam Command: "C:\Program Files (x86)\Mozilla Firefox\firefox.exe" -new-tab "[Device.CustomField1]" --...
by eriitguy
Sun Jul 16, 2017 6:43 pm
Forum: The Dude
Topic: The Dude 6.39.2 Log Files
Replies: 14
Views: 2764

Re: The Dude 6.39.2 Log Files

maxkrok,

As a workaround, to save logs into a file on ROS, we can:
/system logging action add name=dudedisk target=disk disk-file-name="dude-log.txt" disk-lines-per-file=10000 disk-file-count=100 disk-stop-on-full=no
/system logging add topics=dude action=dudedisk
Thank you!
by eriitguy
Sun Jul 16, 2017 5:55 pm
Forum: The Dude
Topic: transfering dude from x86 to 1100Ahx4 Dude Edition
Replies: 2
Views: 1176

Re: transfering dude from x86 to 1100Ahx4 Dude Edition

amt,

May you verify if something like this will work?
# On source
dude set enabled=no
dude export-db backup-file=x86-backup-01.db
#
# On destination
dude set enabled=no
dude set data-directory=disk1/dude
dude import-db backup-file=x86-backup-01.db
dude set enabled=yes
system reboot
#
Thank you!
by eriitguy
Sun Jul 16, 2017 5:33 pm
Forum: The Dude
Topic: Create script on The Dude
Replies: 1
Views: 1445

Re: Create script on The Dude

eduardfora,

These topics contain some advises:
Easy way to mass upgrade firmware?
Feature Request : Mass update of configuration

Thank you!
by eriitguy
Tue Jul 04, 2017 9:26 am
Forum: The Dude
Topic: How do I add MIBs to the dude
Replies: 14
Views: 13008

Re: How do I add MIBs to the dude

It seems that folder
dude/files/default/mibs
is read-only.

1. I have created folder
dude/files/mibs/liebert
and uploaded all mibs files there.
2. Renamed files from .MIB to .MIB.txt
And now I can see all mibs inside MIB nodes in Dude.

Thank you!
by eriitguy
Thu Jun 29, 2017 5:17 pm
Forum: The Dude
Topic: Dude Installation
Replies: 10
Views: 1037

Re: Dude Installation

Juicz17,

On what Windows version do you installed Dude Server 4.0b3?
by eriitguy
Thu Jun 29, 2017 10:38 am
Forum: The Dude
Topic: Dude Installation
Replies: 10
Views: 1037

Re: Dude Installation

Juicz17,

This video show how we added all our devices and all of them UP: https://youtu.be/ZnmFz_j_PeM

We use Dude v6.
May you try a latest beta - 4.0 beta3 (dude-install-4.0beta3.exe)?

Thank you!
by eriitguy
Tue Jun 27, 2017 11:49 am
Forum: The Dude
Topic: Is Dude 6 ready for prime time?
Replies: 6
Views: 738

Re: Is Dude 6 ready for prime time?

Sorry for off topic

dmitryfromchel,
What do you mean by Cisco SNMP support?

Thank you!
There are empty strings values on SNMP tab on device with ROS > 6.37.5. For example, you can't read interface RxTx.
It working fine with Catalyst WS-C2970G-24T-E
CHR with ROS 6.39.1

Thank you!
by eriitguy
Tue Jun 27, 2017 9:02 am
Forum: The Dude
Topic: Is Dude 6 ready for prime time?
Replies: 6
Views: 738

Re: Is Dude 6 ready for prime time?

Sorry for off topic

dmitryfromchel,
What do you mean by Cisco SNMP support?

Thank you!
by eriitguy
Thu Jun 22, 2017 9:31 am
Forum: The Dude
Topic: What happened to the built-in Winbox in The Dude 6.39.2?
Replies: 5
Views: 1504

Re: What happened to the built-in Winbox in The Dude 6.39.2?

Bomber67,

dude v6.xx changelog
v6.38
Removed - Since default Winbox used in the Dude wasn't fully compatible with all RouterOS devices, we removed i completely.
TOOL/WINBOX Disappeared from LIST
by eriitguy
Wed Jun 14, 2017 9:57 am
Forum: Virtualization
Topic: CHR on ESXi - VM got stopped
Replies: 4
Views: 1449

Re: CHR on ESXi - VM got stopped

alex1,
Our CHR is running in ESXi 6.0 cluster.

Thank you!
by eriitguy
Tue Jun 13, 2017 2:50 pm
Forum: Virtualization
Topic: CHR on ESXi - VM got stopped
Replies: 4
Views: 1449

Re: CHR on ESXi - VM got stopped

alex1, Thank you for your question in the forum thread The Dude v6 server - CCR vs CHR as a platform. I will try to ask my colleagues more details about our virtual environment. Now I see uptime 8 days. It was rebooted but I don't know why, maybe this was done by my colleague. Will monitor what is g...
by eriitguy
Tue Jun 13, 2017 2:42 pm
Forum: The Dude
Topic: Email Notifications - General Tab Missing!!!
Replies: 12
Views: 1446

Re: Email Notifications - General Tab Missing!!!

Maggiore81, We use Email notification in Dude v6 using our internal mail server with very simple setup. Now I have tested Dude v6 with Gmail. Please see attached image of the probe and received test message: https://dl.dropboxusercontent.com/s/l447jdvjcnsh67v/2017-06-13_143722.png Please refer to th...
by eriitguy
Mon Jun 05, 2017 2:13 pm
Forum: The Dude
Topic: The Dude v6 server - CCR vs CHR as a platform.
Replies: 4
Views: 1746

Re: The Dude v6 server - CCR vs CHR as a platform.

alex1, We currently use Dude v6 on CHR, all working fine for 150+ devices. We installed a license P1, but it seems that currently we not achieve free limit - 1Mbit/s upload limit. Hardware are following: 1. CPU: 1 2. Memory: 1GB 3. HDD1: ROS - 1 GB. 4. HDD2: Dude - 20 GB. I don't know anything about...
by eriitguy
Fri Jun 02, 2017 9:17 am
Forum: The Dude
Topic: NCCM
Replies: 3
Views: 735

Re: NCCM

chimaster, I don't know how Dude can be used for this. If you have experience, may I ask you to share it? On the forum is described solution like you currently use with config storing on the CVS - Subversion. In Subversion you can see all diffs of exported configs and also get diff of them on the em...
by eriitguy
Tue May 30, 2017 9:10 am
Forum: The Dude
Topic: The dude when restarting the configuration is lost
Replies: 6
Views: 1475

Re: The dude when restarting the configuration is lost

solucisp,

Did you read the following topic: New device that supports The Dude server package: RB750r3 hEX?

Which Dude version do you use?

Thank you!
by eriitguy
Tue May 23, 2017 9:26 am
Forum: The Dude
Topic: Dude v6 - Dependencies - How does it work?
Replies: 6
Views: 1814

Re: Dude v6 - Dependencies - How does it work?

If above described logic is one used in current Dude v6, we can have some issue with it. For example: Gateway-WAN goes down 1. Send notification about Gateway-WAN down 2. Stop Gateway-LAN polling Gateway-WAN goes up 1. Send notification about Gateway-WAN up 2. Start polling Gateway-LAN 3. Issue can ...
by eriitguy
Mon May 22, 2017 10:24 am
Forum: The Dude
Topic: Dude v6 - Dependencies - How does it work?
Replies: 6
Views: 1814

Dude v6 - Dependencies - How does it work?

Hello! We have started to use dependencies in Dude v6. We have one device with LAN and WAN address. For example Gateway-WAN - 10.0.0.1 |-- Gateway-LAN - 192.168.0.1 Gateway-LAN can be up only if Gatewa-WAN is up. When device Gateway-WAN goes down we receiving only notification about its down status....
by eriitguy
Fri May 19, 2017 8:18 pm
Forum: General
Topic: OpenVPN SHA256 + UDP
Replies: 56
Views: 23264

Re: OpenVPN SHA256 + UDP

mariusp,

Some information about this long awaited requests cab be found in the following forum topic: Feature Request: OpenVPN [ovpn] udp tunnels
by eriitguy
Wed May 17, 2017 7:30 am
Forum: General
Topic: tool fetch - 2xx HTTP response codes
Replies: 3
Views: 2073

tool fetch - 2xx HTTP response codes

Hello! In process of setup Dude SMS notification using fetch tool we noticed that it fail on 202 HTTP response code from the web server. As a result script fails and stop. According to the Wikipedia: List of HTTP status codes : 2xx Success This class of status codes indicates the action requested by...
by eriitguy
Wed May 10, 2017 4:31 pm
Forum: The Dude
Topic: Dude SMS Notifications
Replies: 5
Views: 2113

Re: Dude SMS Notifications

shrek777, We use SMS notification via HTTP request. It looks like this: # # Send SMS # :local notificationtextEncoded "[Probe.Name] on [Device.Name] is now [Service.Status] - [TimeAndDate] - [Service.TimeSinceChanged]"; :local url http://192.168.1.1:1111/sendsms; :local username user; :local passwor...
by eriitguy
Tue May 09, 2017 9:46 pm
Forum: The Dude
Topic: help
Replies: 5
Views: 661

Re: help

kadhim09, As described on Dude v6 installation page : System requirements for server package RouterOS: v6.34rc13 or newer Hardware: Tile - CCR series hardware ARM - RB3011 mmips - hEX (RB750Gr3) RouterOS x86 installations RouterOS CHR environment Your device can be used as a Dude agent . Thank you!
by eriitguy
Tue May 09, 2017 3:06 pm
Forum: The Dude
Topic: Can I set web access for The Dude 6.37 ?
Replies: 1
Views: 3505

Re: Can I set web access for The Dude 6.37 ?

mmc01, Started from Dude v6, Web interface was removed: The Dude is back! v6.34rc test build released : Removed features: * Windows server * Language selection for The Dude client * Web interface Starting from v6.38 is now possible to access Dude map from Webfig: Major changes: Added - Dude now have...
by eriitguy
Thu May 04, 2017 5:59 pm
Forum: The Dude
Topic: dude problem
Replies: 6
Views: 1106

Re: dude problem

kadhim09,

Starting from Dude v6 it is no more Windows server exist.
In such case you should connect to the Dude server installed on Router OS, for example on your RouterBoard.
You should specify RouterBoard IP for connection.

Thank you!
by eriitguy
Thu May 04, 2017 1:57 pm
Forum: The Dude
Topic: dude problem
Replies: 6
Views: 1106

Re: dude problem

kadhim09,

Did you specify IP address of the dude server?
by eriitguy
Sat Apr 29, 2017 5:21 pm
Forum: Announcements
Topic: The Dude, v6.39rc test builds.
Replies: 121
Views: 28559

Re: The Dude, v6.39rc test builds.

Hello!

Please add a possibility to add multiple "To" in Email notification. Something like: user@domain.com, user2@domain.com

And it seems that Dude and Winbox shows different Server address:
Dude
Server Dns Name: smtp.gmail.com

Winbox
Server: 0.0.0.0

Thank you!
by eriitguy
Fri Apr 28, 2017 12:36 pm
Forum: The Dude
Topic: Multiple email recipients
Replies: 2
Views: 1276

Re: Multiple email recipients

Hello, BobInWisc!

Did you find a solution?
We have similar issue with Dude v3.6. Now we have added second address as CC.

Another solution is to use CLI mail clients.


Thank you!
by eriitguy
Thu Feb 23, 2017 11:17 am
Forum: The Dude
Topic: Dude v6 - SNMP builtin Data Sources
Replies: 3
Views: 875

Re: Dude v6 - SNMP builtin Data Sources

dpilibosian
Thank you for proposal, it will be very usefully!
by eriitguy
Fri Feb 17, 2017 10:47 am
Forum: The Dude
Topic: Dude v6 - SNMP builtin Data Sources
Replies: 3
Views: 875

Re: Dude v6 - SNMP builtin Data Sources

It seems that builtin Data Sources created when SNMP link is added between devices.

This is the same behavior as in earlier Dude version.

Thanks!
by eriitguy
Thu Feb 16, 2017 2:26 pm
Forum: The Dude
Topic: Dude v6 - SNMP builtin Data Sources
Replies: 3
Views: 875

Dude v6 - SNMP builtin Data Sources

Hello everyone! I'm trying to add a new switch in the Dude v6 in order to create a Charts for its interfaces. In the old Dude v3.6 instance i see multiple builtin Data Sources of the switches interfaces. But in v6 only builtin Data Sources for probes, for example "ping". How they can be created in D...
by eriitguy
Thu Jan 26, 2017 3:18 pm
Forum: The Dude
Topic: when added to the chart data source, unknown type of error
Replies: 5
Views: 1058

Re: when added to the chart data source, unknown type of error

krisjanis, thank you for confirmation!

We will try a latest dude release.
by eriitguy
Thu Jan 26, 2017 1:26 pm
Forum: The Dude
Topic: when added to the chart data source, unknown type of error
Replies: 5
Views: 1058

Re: when added to the chart data source, unknown type of error

krisjanis

I have similar issue in Dude 3.6 installed on Windows server.

Can someone confirm that this is a bug in version 3.6 and it is fixed in new Dude v6?

Thank you!