MikroTik

eriitguy

fjacques,
We use Dude v6 - Backup to FTP.
Dude v6 - Backup locally make same thing.

Can't say currently anything about layout and discovery - we add all devices manually.

Thank you!

eriitguy

Hello, fjacques! We have noticed something similar but with earlier version of Dude v6. Interfaces LAN1, DMZ and WAN disappeared from the list. It also was noticed that Dude v3.6 in same time show all correctly. Request was sent to support: "[Ticket#2017062122000832] Dude v6 - SNMP tab data inc...

eriitguy

Hello, amt!

Did you try to ask support from Mikrotik?
normis sometime mention that they may not read all forum topics.

Thank you!

eriitguy

Hello, melrol0611! As was mentioned by jarda, Dude v6 server currently supported only by some RouterBOARD platforms: The Dude v6 Installation - System requirements for server package Hardware: Tile - CCR series hardware ARM - RB3011, RB1100AHx4 Dude Edition (RB1100Dx4), hAP AC2* mmips - hEX (RB750Gr...

eriitguy

Hello! We are trying to configure two different subset of notification for same probe: Device probes ping Polling Probe Interval: Default Probe Timeout: Default Probe Down Count: Default Notifications Email-24h Logs-Syslog And we also want to get SMS notifications but with slightly different polling...

eriitguy

Hello, OnixJonix!

Topic Syntax for labels probably may help you.

Thank you!

eriitguy

Hello, afis!

Probably information from the following forum posts may help you.:
1. Triggering script from a firewall rule
2. Log Parser - Event Trigger Script

Thank you!

eriitguy

It seems that at the moment "Check For Updates" doesn't see version 3.12 of the Winbox.

Thank you!

just checked.. it does find the update...

It works, thank you!

eriitguy

It seems that at the moment "Check For Updates" doesn't see version 3.12 of the Winbox.

Thank you!

eriitguy

Hello, lodilodilodi!

May you please verify if in the Polling tab a checkbox is checked for Email notification you have configured?

Thank you!

eriitguy

Version 6.42rc15 has been released. Changes since previous release: *) routerboard - added RouterBOOT "auto-upgrade" after RouterOS upgrade (extra reboot required); If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must b...

eriitguy

Hello, suserevent!

Does your device is pingable from the Dude?
It is same model - TL-SG108E?

Thank you!

eriitguy

m4t7e0, thank you!

This topic was reported to the support in one of the the initial request. Hope they will be able to fix the issue. Don't know when as Dude development is frozen/slowed.

Thank you!

eriitguy

m4t7e0, on which platform your Dude server is running and who are clients? If you can, please provide some models of the Routerboards and their installed ROS versions. As you described in the first post you currently on the 'Bug fix only' channel and use latest channel version. Anyway I see the issu...

eriitguy

Trying to install dude-install-6.41.exe from https://download2.mikrotik.com/routeros/6.41/ and it keeps getting blocked on my machine via Norton Security with comment: "Threat type: Insight Network Threat. There are many indications that this file is untrustworthy and therefore not safe" ...

eriitguy

m4t7e0, thank you for explanation! Why you can't change Winbox port for all of the devices, which issue is in your case? In my test environment I had recently an issue with ROS devices with non-default Winbox port and reported it to the support: [Ticket#2018010322001999] RE: Dude v6 - ROS with custo...

eriitguy

Hello, m4t7e0!

All the device are collected, but i can't accesso on it via Dude...

What device and how do you trying to access it?
May you please explain more detailed what do you trying to do?

How i can change the default RouterOS port on Dude Device?

Dude device is Dude server?

Thank you!

eriitguy

Hello, rado3105!

I don't know how. Maybe information from the following topic may help you: Mass command execution.

Thank you!

eriitguy

Hello, allstarcomps! Thank you for reply! I have added additional information about Dude client in the initial post. Issue you describing is related to the case that for Dude client auto-update administrative privileges are required: Connect the same version of the client, with several different ver...

eriitguy

Hello! We experienced today an issue with Dude server v6.41 on CHR running on ESXi 6.x and Dude client v6.41 on Windows server 2012R2 Standard x64. Probably it worked fine because it send us some notification but we can't connect to it using Dude client. It was verified from 2 locations. We noticed ...

eriitguy

Hello, neutronlaser! It seems that people already started discussion about ROS on Raspberry Pi: [REQUEST]Raspberry Pi . In case of the Dude a support from its side will be also required. Currently Dude support only the following platforms: System requirements for server package Hardware: Tile - CCR ...

eriitguy

Hello, John39!

Probably you may find some information in the following forum topic: The dude reset configuration [SOLVED]

Thank you!

eriitguy

nikola033,

May you try to run Dude client as administrator? It seems that auto-update may not work because it may not have rights for this.

Thank you!

eriitguy

erebusodora, May I ask you to verify if ROS collecting data method show correct data in your configuration? What will happening if we will configure 'routeros management' service with custom Winbox port for all devices behind NAT? For this we should: 1. Elect 'no-snmp' SNMP profile. 2. Enable checkb...

eriitguy

Hello, edinorog! We also have similar issue and reported it to the support: [Ticket#2018010322001999] RE:Dude v6 - ROS with custom Winbox port - Dude hangs issue. In our case it hang when to the ROS device with custom Winbox port a "routeros management' service is added and disabled: https://ww...

eriitguy

apiel1, Which interfaces do you have on your devices - 1Gbps or 10Gbps? From the SNMP Counters: Frequently Asked Questions : Q. When should 64-bit counters be used? A. RFC 2233 adopted expanded 64-bit counters for high capacity interfaces in which 32-bit counters do not provide enough capacity and w...

eriitguy

apiel1,

Om my test map I have something like this:

Dude-v6-Link-appearance-01.png

Does the issue is manifested only with one host/link or with any other links too? Do you have a possibility to verify it on another device/link?

Thank you!

eriitguy

apiel1, thank you for provided information!

It looks like all is configured correctly on your side and Dude got information using SNMP.

May you try to add some variables into the link label, near existing one?

[Interface.Name]
[Interface.Index]
[Interface.Type]
[Interface.Speed]

Thank you!

eriitguy

It seems, that at the moment, Dude can't handle configuration described in the posts above. For more information please see Dude server v.6 - not working with port forwarding.

Thank you!

eriitguy

Hello, erebusodora! It seems that you are right, Dude v6 can't work correctly with SNMP forwarded ports at the moment - which was confirmed by support. Forgive me for misleading you... As you mentioned I have added links between devices. The results: 1. Information on devices labels is correct. 2. I...

eriitguy

Hello, Djago!

Maybe the following topics contain some information:
1. SNMP OID for Qty of Wireless Clients Connected.
2. Hotspot active users OID for SNMP.

Thank you!

eriitguy

apiel1,

May you try to add devices and their links on the test map in same Dude to verify if newly created object will work as expected?

Thank you!

eriitguy

Hello, nikola033!

It seems that we have similar situation:

Dude-v6-Device-xml.png

Thank you!

eriitguy

apiel1, hello!

Maybe interfaces indexes were changed and need to be re-selected on link properties, may you look at this?

Thank you!

eriitguy

All my devices have same user/pass , MikroTik should add "routerOS credentials" in dude and then will be easier to discover all devices with just one click. At this point it is not possible to do that. Do you know any workaround ? A feature request was created and we are waiting to be imp...

eriitguy

nasbot,

Does mass edit work for you?
1. Select multiple devices using mouse (also a Ctrl button may be used in case of need).
2. Right click.
3. Settings.
4. Define username/password.
5. Ok.

Thank you!

eriitguy

nasbot,

May you try to specify username/password for multiple devices at once?

Thank you!

eriitguy

erebusodora, Please note that The Dude does not know anything about the port forwarding, this is done the layer3 level. Thats why if the address is reachable from the Dude, you will see the same information as if the would be directly connected. This is good for us as we configured port forwarding o...

eriitguy

erebusodora, Probably a some time is required to update information in the Dude from the clients. Anyway, you should change ROS port as you do it for Minyor or uncheck ''Router OS" and "Secure mode" for all ROS devices behind NAT. Also, please be aware that username and password are v...

eriitguy

erebusodora, may you also verify ''Router OS" and "Secure mode" checkbox - probably they are disabled for this device.

P.S: Now I find that ObA device in pictures is missing!!! . In DUde -client MAP the OBA device is there but in server is missing !!! .... strangely

Thank you!

eriitguy

pe1chl, we may have similar situation in mixed environment and it should work anyway.

Thank you!

eriitguy

Hello, erebusodora! Thank you for provided screens! From them we see that all ROS devices behind NAT have similar information: Resources, Routerboard and Health tab. Do they are similar devices and have same uptime? We may start to find an issue from Minyor, because here you noticed only one issue -...

eriitguy

erebusodora, thank you for detailed information! Yes, from information you provided it seems that an issue exist. May I ask you about ROS Winbox access to the Minyor device? Does it is accessible via default 8291 port or it is NAT'ed also to the different port? And if checkbox 'Router OS' and 'Secur...

eriitguy

benjamimgois, in my case custom files also stored in the 'dude/files' directory - but default images stored in different one: Dude-v6-ROS-x86-Dude-custom-images-location.png As described in the Wiki : 2. File that were previously generated by server like default mibs/images/etc on first server start...

eriitguy

benjamimgois, thank you for refinement!

May you please specify your custom files location?

Thank you!

eriitguy

Hello, vijaykumaryadav4u!

Maybe topic, Problem SNMP speed interface, will explain something.

Thank you!

eriitguy

Hello benjamimgois, horzam! I just tried to reproduce the issue but currently it is not reproducible: 1. Download ROS 6.41 x86 - https://mikrotik.com/download 2. Install it inside VirtualBox - Linux, Other Linux (64-bit), VDI - 128 MB, dude package is selected in process of installation - https://wi...

eriitguy

Hello , eriitguy In my case I have 30 board behind NAT. The schema you showed is just one board . In my case, the information from the boards behind NAT is mixed with other boards behind the NAT. Put two more boards behind NAT and try to see. erebusodora, I just tested more complex configuration . ...

eriitguy

Hello!

A more complex configuration was verified in test environment:

Dude-v6-Specify-custom-SNMP-port-08-Multiple-devices-Diagram.png

Dude-v6-Specify-custom-SNMP-port-09-Multiple-devices-Custom-SNMP-profile.png

Dude-v6-Specify-custom-SNMP-port-10-Multiple-devices-Devices.png

Thank you!

eriitguy

horzam, no. We don't have similar issue - we use Dude on CHR without data lost. Hello, honzam! May you show what is shown inside Map settings after disappearance? You have the same problem? Backround = none I just want to identify the issue more precise in order to address it to support. In the topi...

eriitguy

Hello, Sinan!

It was verified in test environment that this solution works: Specify custom Winbox port for ROS device in Dude.

During verification we found some issue and reported it to Mikrotik support.

Thank you!

eriitguy

Hello! In order to add a ROS device with custom Winbox port in Dude, we may: 1. Device --> Right click --> Settings --> Services --> + Probe: routeros management Probe Port: Custom Winbox port --> Ok Dude-v6-Specify-custom-Winbox-port-for-ROS-device.png Thank you! Related forum posts 1. Change Winbo...

eriitguy

Hello, honzam!

May you show what is shown inside Map settings after disappearance?

Thank you!

eriitguy

Hello, erebusodora!

I just tested CHR with forwarded SNMP port in the test environment and it working fine.

Thank you!

eriitguy

Hello! This approach was verified in test environment: Dude-v6-Specify-custom-SNMP-port-03-Diagram.png Dude-v6-Specify-custom-SNMP-port-04-Custom-SNMP-profile.png Dude-v6-Specify-custom-SNMP-port-05-SNMP-Tab.png Dude-v6-Specify-custom-SNMP-port-06-Snmpwalk.png Dude-v6-Specify-custom-SNMP-port-07-Dev...

eriitguy

Dear Mikrotik Team, Please review a possibility to define a credentials profiles for Discovery: 1. SNMP profiles - multiple SNMP profiles may be assigned for Discovery. 2. Password profiles - multiple Password profiles may be assigned for Discovery. If no SNMP or Password profile defined during Disc...

eriitguy

Dear Mikrotik team, Please review a possibility to add a default Password profile for the Map, like this currently is done for Polling. This may help to change Password settings in few clicks for multiple devices on the Map. Thank you! Related feature request 1. Feature Request - Password Profile to...

eriitguy

Hello! I also can't find a way to define a "User Name/Password" for Discovery. Feature request was created for this: Feature request - Credentials profiles for Discovery . As a workaround we may mass change devices properties: 1. Map --> Select multiple ROS devices --> Right click --> Sett...

eriitguy

Hello, mikrotik team!

Please consider the following request for next upgrade of mAP:
1. Embedded LTE with SIM slot
2. 32 MB of storage
3. USB type C

Thank you!

eriitguy

drakabelkabeldrag,

Dude v6 is a ROS package which should be installed into ROS: Manual:The_Dude_v6/Installation.
Did you install Dude on your ROS?

Thank you!

eriitguy

Hello, tomislav91!

Like was already mentioned by Shadeofspirit:
1. Go to download page https://mikrotik.com/download
2. Choice your platform.
3. Choice your ROS version.
4. Download appropriate Dude server package.

Dude-Server-package-for-CCR-01.png

Thank you!

eriitguy

Hello!

It seems that one more feature was removed from Dude v6: Export Map interval

Thank you!

eriitguy

Hello, jwityshyn! Probably you may get more replies if you will move your post to different forums: Beginner Basics or General , here people discussing Dude monitoring tool. On these forums you may find similar questions and maybe will find a solution. If you say that you receive incoming mails, thi...

eriitguy

Hello!

Maybe a force backup creation before update with notification about such behavior in changelog?

Thank you!

eriitguy

Hello, ShowMeGuy! It seems that accordingly to the Wiki information, System_requirements_for_server_package : Hardware: Tile - CCR series hardware ARM - RB3011, RB1100AHx4 Dude Edition (RB1100Dx4) mmips - hEX (RB750Gr3) RouterOS x86 installations RouterOS CHR environment mmips - hEX (RB750Gr3) is co...

eriitguy

anyone???

Hello, mcnick50!
As a workaround the following steps may be used:

1. Dude --> Device --> Settings --> Custom Field 1 --> Your device port --> Ok
2. Dude --> Tools --> Web --> "[DeviceType.Url]":[Device.CustomField1] --> Ok

Thank you!

eriitguy

Hello, steen! We started to use Dude v6 and generally it is very stable. Some issues exists, but some of them are not critical. ESXi 6.x on SAN. ROS 6.39.1 for CHR, uptime 175d. We have for about 10 maps with 250+ devices. Ping, SNMP and TCP probes. 1. Is Dude 6 ready for prime time? 2. Optimal hard...

eriitguy

1. May we buy it on Ebay without any issue?
2. Where may we get latest version of firmware in order to get it working with Mikrotik in Direct IP mode?

Mikrotik RouterOS - Sierra Wireless Netgear AirCard 320U 4G LTE Modem support

Thank you!

eriitguy

Good evening, is there any way to monitor the status of an interface? I wish Dude would alert me when the speed of the door is changed. Hello, admskill! May some of these topics may be usefully for you: 1. Norification if speed on a link drops 2. Event interface half-duplex 3. Monitor Interface Sta...

eriitguy

Thank you eriitguy for your verification! I'm sorry I am wrong (I certainly do not remember well), maybe I selected all the hosts on a map and then edited with a one-click the snmp configuration for all of them. Anyway I am glad that it could be an idea worthy of a feature request ! But do not ask ...

eriitguy

Dear Mikrotik team,

Please review a possibility to add a default SNMP profile for the Map, like this currently is done for Polling.

This may help to change SNMP settings in few clicks for multiple devices on the Map.

Thank you!

----
Feature request list for Dude v6

eriitguy

I miss also another feature. In the Dude v4 I remember that you could set snmp settings for each network map indipendently. Sometimes I want to completely stop the snmp checks on all the device of a specific map, and before I could do it through the map setting (snmp set to no-snmp), but now it see...

eriitguy

Hi dear, thank you for your kind answer! I am not so expert, but I don't think it is the same. The old "execute" function was able to catch the output of the batch so that you could treat it as an array of string and get the one in the position you specified. The execute notification you ...

eriitguy

ok I can see it but cant get it.
when we have abous 10k devices list loads very slow via webfig
what about api, dear Mikrotik Team?

In 4beta3 it can be done by using web server.

How did you get this in Dude 4?

Feature request - Accessibility of Dude data via SNMP and API

Thank you!

eriitguy

Hi, Is there an option to view network maps on a web browser? We bought some TVs to view some dashboards (Zabbix / PRTG / Management Software / etc.). They only work with web browsers, do not allow to download app (like remote desktop feature). The only way we found to view dude on one of these TVs...

eriitguy

I miss the "Execute" function that on Dude v4 allowed me to launch Windows batch commands and get the output to use it into another user-defined function as the one below Function : check_poe Code: if((array_element(execute("checkpoe.bat",device_property("FirstAddress"...

eriitguy

Hello, gcser!

In my case all working fine:

Dude-v6-Export-db-01.png

Thank you!

eriitguy

Hello, alexspils!

You may try to see device like in earlier Dude, via Web:
WebFig --> Dude --> Devices

Thank you!

eriitguy

Hello! Dude have an Outages tab, where we may see: Dude-Outages-duration-and-Service-down-duration-01.png Status : Outage state Time : When the outage start Duration : How long does outage is last Service : Failed service By using this information we should be aware about polling settings: Probe Int...

eriitguy

Hi, I'm having problems trying to display the OIDs values through labels. I can see all the MIB's OIDs using the SNMP Walk, yet when I edit the label in the Appearance options of the network map element, it hasn't display anything. For example, the OID "3.6.1.4.1.41112.1.6.1.2.1.6.0" or &...

eriitguy

Hello, c400!

Is there anybody who will guide me through the process?

May you try to follow steps from this video https://www.youtube.com/watch?v=GIijZ6_i55g in order to Netinstall your device?

Thank you!

eriitguy

Thanks for answer :) But still i dont know how to run mass command execute ie. /system identity set name= pikpik, I don't know how this may be done from Dude. On the forum you may find some information about this: 1. Configurable solution to automatically backup Mikrotik's routinely? 2. Script to l...

eriitguy

Hello, How can i massively execute command via Dude on devices (RouterOS) ? I need to upgrade firmware (bios) on 1000+ devices. It is possieble ? Hello, pikpik! You may start from the following topics: 1. Feature request RouterBOARD upgrade mechanism 2. Easy way to mass upgrade firmware? 3. Multipl...

eriitguy

Trisc,

May you try to copy winbox.exe to the Dude client folder?
In such case you probably might be able to add Winbox tool without full path.

If this will work, all you Dude client should do the same.

Thank you!

eriitguy

yonnie,

May you disable Dude on your 750gr3 to see is something changes?

Thank you!

eriitguy

seanwg, If I understand correctly, at the moment we have two possibilities to connect to the Dude. 1. Dude Windows client. 2. ROS Webfig. Dude Windows client uses Winbox port and should be secured by itself. You also may specify "secure" during connection. ROS Webfig may be accessed via HT...

eriitguy

wegface,

As sid5632 mentioned, starting from v6.37 Dude uses Winbox port. By default this is 8291.

On which port your Winbox is listening?

/ip service print

Thank you!

eriitguy

Mackiavelly,

A request was created and we are waiting to be implemented: Feature request - Multiple logs instances.

Task you trying to accomplish may be easy done via Kiwi Syslog.
Rule 1 - Syslog
Rule 2 - Device up
Rule 3 - Device down

Thank you!

eriitguy

Sadly, it looks like the footage was probably all from inside the Raging Wire data center and not an AWS data center. It was still good to see it being used though. Ragingwire is part of NTT, they are data center operator and they are in business of leasing data center space and infrastructure to c...

eriitguy

normis,

But we periodically get only up notifications for some devices, which may confuse us: Ticket#2017052022000551.

Dude v6 - Dependencies - How does it work?

If you heave a time and possibility, please look on it.

Thank you!

eriitguy

Video with demonstration of the related issue: https://www.youtube.com/watch?v=ihuW-J-SV5M Ticket#2017052022000551 Reply from support: Seems like the issue happens with child device, in case when status changes from Unknown => Down. In this case notifications reports only status "Down" to ...

eriitguy

hello everyone..

i have some problem..

i using dude.. testing e-mail notification..

but error has come TT

help me

Hello, lim!

It seems that some solutions was already posted in you recent forum topic: hi everyone i have some problem.. e-mail notification

Thank you!

eriitguy

Hello, lim! From the screenshot you provided we may assume that you use Windows version of the Dude and Email notification via Gmail using blat. You may see how it may be configured in the following forum topic: Dude - Email notification through Gmail on Windows - via blat . As blat doesn't support ...

eriitguy

In the map view add device comments and some notification mark that shows that comments are added, what you can see when you move mouse over - like comments in MS excel for example!! Sometimes it is necessary to comment some configuration if you noticed some problems or give some comment about conf...

eriitguy

jamecollins,

In your case you want that Dude access your ROS with non default port. You may try to follow guide in the following forum topic: Adding RouterOS device with no default port , adding images problem

Thank you!

eriitguy

Hamit, The easiest way is to use snmpwalk for the list of devices. Then you may use diff and in case of changes send an Email notifications. From Dude side you may to try to configure a probe, something like "Check device serial number". Probe Thread Thank you! And to send somehow the dat...

eriitguy

complete2006, Probably that currently is not possible to specify on which IP of the ROS Dude should listen its service. By default it will be accessible on all ROS interfaces and you may limit this using firewall. Outgoing connection will be made using routing table and corresponding ROS IP address....

eriitguy

Hamit,

The easiest way is to use snmpwalk for the list of devices. Then you may use diff and in case of changes send an Email notifications.

From Dude side you may to try to configure a probe, something like "Check device serial number".
Probe Thread

Thank you!

eriitguy

Maybe a Dude agent might help here? Thank you! CRS1xx, CRS2xx, DISC, LDF, LHG, NetBox, NetMetal, PowerBox, QRT, RB9xx, hAP, hAP ac, hAP ac lite, mANTBox, mAP, RB4xx, cAP, hEX, wAP, BaseBox, DynaDish, RB2011, SXT, OmniTik, Groove, Metal, Sextant, RB7xx don not have a Dude server/agent packages. This...

eriitguy

jamecollins,

Feature request - Specify custom SNMP port for the device [SOLVED]

Thank you!

eriitguy

Dear Mikrotik team, Please review a possibility to specify a custom SNMP port for the device. In current Dude implementation it may get SNMP data without specifying a port and it seems that it uses a default,161 UDP port. In some cases device maybe behind the NAT and we may configure a port forwardi...

eriitguy

jamecollins,

If I understand correctly, port you are trying to specify is used only for SNMP.
Any another device probes are added inside a "Services" tab.

Dude support this in the way described in the next post.

Thank you!

eriitguy

Dude v6 6.39.3 (Bugfix only): https://download2.mikrotik.com/routeros/6.39.3/dude-install-6.39.3.exe dude-install-6.39.3.exe.sha256 7a8ee9e67c5977f90c5316450ad2be50c5fb0976f30ab6fbb434f85f85561d23 *dude-install-6.39.3.exe 6.40.4 (Current): https://download2.mikrotik.com/routeros/6.40.4/dude-install...

eriitguy

meverest,

It is an interesting idea.

Feature request - Accessibility of Dude data via SNMP and API

Thank you!

eriitguy

Dear Mikrotik team, Please review a possibility to add accessibility of Dude data via SNMP and API. This may be usefully for integration of the Dude with another applications. Thank you! Related forum topics 1. Dude API. Need to extract info 2. Dude Roadmap - API? 3. Database/API Documentation 4. Pr...

eriitguy

rodriguescr,

If I understand correctly, agent should be specified as a regular device. What do you see under your devices Settings?

Dude-v6-Device-settings-Agent-01.png

eriitguy

Hi, I'm trying to import from our old dude server, that is monitoring about a 1000 hosts with various services, the problem is we use some agents spreaded across our network, and as Dude V6 doesn't support agents anymore, the hosts that are using other agent then the default one are being imported ...

eriitguy

meverest, Something similar may be achieved by using Feature request - Sending Reports . If that feature request will be implemented we may than will be able to list all devices on the map and their state. Maybe something like this: [NetMap.ProbesDownList] [NetMap.ProbesDownCount] should be added in...

eriitguy

bo1337,
You may look at What Mikrotik router support TheDude?

Thank you!

eriitguy

normis , Recently, an issue was addressed to the support and we got a reply. I don't know which Criticity level on it - Ticket#2017052222001251. Sometime it may be like a closed eyes. And currently we didn't get a practical issue with it. Dude v6 - Dependencies - How does it work? If you heave a ti...

eriitguy

Video with demonstration of the issue: https://www.youtube.com/watch?v=PyCB0rsLP_c

Ticket#2017052222001251

Reply from support:

Reply about the notificatios sent on ticket #2017052022000551

eriitguy

Dear Mikrotik team, Please review a possibility to provide a full featured Web access support to the Dude. As it currently done via Webfig it should be updated to permit us: 1. Configurable access to all Dude elements. For example, currently is not possible to restrict access to only one map. 2. Pos...

eriitguy

Dear Mikrotik team, Please review a possibility to add multiple separate log instances, like it was in earlier Dude versions. This may help us to log different events in appropriate instance in order to group them. [attachment=0]Dude-v6-Feature-request-Multiple-logs-instances-20171023-01.png[/attach...

eriitguy

Dear Mikrotik team, Please review a possibility to add Existing device to the another or same map. For example: We may have a main map with all our devices and some of them may be added to another maps/submaps in order to maintain topology. In such case we should be able to do: + --> Add Existing de...

eriitguy

Dear Mikrotik team, Please review a possibility to add easy configurable basic probes, like: 1. Ping 2. Trace 3. URL 4. HTTP 5. Certificate expiration 6. Domain expiration 7. SMTP 8. IMAP 9. Mail relay 10. TCP 11. UDP 12. NTP 13. DNS 14. DHCP 15. LDAP 16. RADIUS 17. CPU Load 18. Memory usage 19. Dis...

eriitguy

Dear Mikrotik team,

Please review a possibility to add WMI support in the Dude in order to be able to get more monitoring data from Windows hosts.

Already requested on the forum
1. Feature request:WMI
2. wmi
3. Does the dude support WMI?

----
Feature request list for Dude v6

eriitguy

Network Map --> Outages shown also devices which is in a Asked state too. In such case it seems that this is not very useful to get Up/Dow devices list.

Thank you!

eriitguy

Dear Mikrotik team, Please review a possibility to return Outages Notes as they were in Dude v3.6: [attachment=0]Dude-v6-Feature-request-Add-Notes-to-Outages.png[/attachment] It may be useful in Notifications, Appearance and for history purpose to note cause of appeared outage. Thank you! Related fe...

eriitguy

tomasi,

We have some links with traffic above 500Mbit/s:

Dude-v6-Chart-Traffic-above-500-Mbitps.png

Thank you!

eriitguy

Dear Mikrotik team, Pleas review a possibility to view Notifications assignment. We may have multiple notifications configured and before modifying or deleting them it will be usefully to see to which devices they are assigned. In case of simple deletion we may leave some devices without notificatio...

eriitguy

Hello! Starting from RouterOS v6.41 Mikrotik have added LTE Passthrough feature which permit to apply IP configuration directly to the client device. We have made some tests using Huawei 3372h-153 modem from Moldcell carrier. Modem model /system resource usb print detail 2 device="1:2" ven...

eriitguy

Maybe adding a "Network Map" in Dude CLI might help at the start? But something like this: [NetMap.DevicesCount] [NetMap.DevicesPartiallyDownCount] [NetMap.DevicesDownCount] [NetMap.DevicesDownList] [NetMap.DevicesUpList] [NetMap.DevicesAskedList] [NetMap.DevicesPartiallyDownList] [NetMap....

eriitguy

Maybe a Dude agent might help here?

Thank you!

eriitguy

Reply from Mikrotik support: 3. This modem is not listed in the wiki page: https://wiki.mikrotik.com/wiki/Supported_Hardware#4G_LTE_cards_and_modems 4. This modem is not listed in the wiki page: https://wiki.mikrotik.com/wiki/Manual:Peripherals the modem might work in the RouterOS 5. May we get it w...

eriitguy

I got it working with rc44 but not the way I was thinking it will work. My laptop got IP from Huawei's LAN range (198.168.8.0/24). I thought it will get IP directly from ISP...

May you please provide a configuration which is working for you?

Thank you!

eriitguy

Dear Mikrotik team, Please review a possibility to rename "Notifications" into "Actions". Currently, under "Notification" we may specify multiple actions, like: 1. beep 2. email 3. execute locally 4. execute on server 5. flash 6. group 7. log 8. popup 9. sound 10. speak...

eriitguy

Dear Mikrotik team, Please review a possibility introduce more granular time period in Notifications Schedule. For example, currently it is not possible to define period less than 1 hour. As an interesting example Advanced Host Monitor may be used. Thank you! ---- Feature request list for Dude v6

eriitguy

Dear Mikrotik team, Please review a possibility to separate Schedule from Notifications. This may help us to configure/modify more easy Notifications. For example, currently we have multiple notifications with same actions and only Schedule is different: Dude-v6-Feature-requerst-Separate-Schedule-fr...

eriitguy

wtm,

We run Dude using CHR. ROS is not touched and don't used, just for user management.

Thank you!

eriitguy

!) detnet - implemented "/interface detect-internet" feature; https://wiki.mikrotik.com/wiki/Manual:Detect_internet Is this feature feature optional if someone does not want their router to contact cloud.mikrotik.com every minute? Is it just cosmetic (ie: " this interface is 'WAN' ju...

eriitguy

Thanks for the info! We still can't get it working with 6.41rc44. Applied configuration: # # /system reset-configuration skip-backup=yes # /system logging add topics=lte # /interface lte apn print /interface lte apn add apn=profile1 passthrough-interface=ether3 /interface lte set lte1 apn=profile1 ...

eriitguy

Hello, everyone! We are planning to buy a Sierra Wireless AirCard 320U LTE modem in order to be able to get Public IP on the Mikrotik. Also it may be usefully to use it in LTE Passthrough mode. As we read on this thread, this may be done but some questions remain: 1. May we buy it on Ebay without an...

eriitguy

matiaszon,

We have tried similar modem and get similar issue.
Mikrotik support replied that they found an issue and it was fixed in v6.41rc39. We are waiting this to be published in order to test it.

Thank you!

eriitguy

ams16,

1. What version of the Dude do you use?
2. To which port do you trying to connect?

Similar situation is mentioned here: Dude fresh install doesn' connect

Thank you!

eriitguy

pwtinternet,

May you try to verify if Dude is able to ping them?
TL-SG108E --> Right click --> Tools --> ping

What are you seeing in the results?

Thank you!

eriitguy

viewtopic.php?f=21&t=123936&start=100#p614799

If you see the same changelog entry in multiple rc versions then it is a new feature which is being implemented and changelog entry is simply moved up on each rc when additional work on it has been done.

Thank you!

eriitguy

strods,

What is difference between earlier RC, for example:

What's new in 6.41rc38 (2017-Oct-03 11:51):

*) lte - added Passthrough support (CLI only);

What's new in 6.41rc31 (2017-Sep-20 06:56):

*) lte - added Passthrough support (CLI only);

eriitguy

normis, thank you for observation:

[admin@CHR] > /tool fetch url="https://httpstatuses.com/204"
      status: finished
  downloaded: 3KiBC-z pause]
    duration: 1s

It working as expected!

eriitguy

What's new in 6.41rc37 (2017-Oct-02 06:47): Changes since previous 6.41rc release: *) fetch - accept all HTTP 2xx status codes; Thank you for this fix! I don't know how it was planned but noticed that it failed at 204 status code: [admin@CHR] > /tool fetch url="http://httpstat.us/204" sta...

eriitguy

This was solved in the ROS 6.41rc37 What's new in 6.41rc37 (2017-Oct-02 06:47): *) fetch - accept all HTTP 2xx status codes; Now we may run fetch each after another, if web server return 202 and other 2xx status codes: /tool fetch url="http://httpstat.us/202" keep-result=no /tool fetch url...

eriitguy

jmay,

Described a Dude v6 - Backup local solution.
It was verified that it may be used to copy all Dude maps to another instance.

Thank you!

eriitguy

LifeDS, May you provide more details when issue is reproduced? For example: 1. Start VM with CHR. 2. After 24 hours - reboot ROS from Winbox. 3. After start all data is lost. I see that we have more that 100 days of uptime on our ESXi without any issue. Some time we reboot it. And also, once a week ...

eriitguy

ibr771,

May you try to install the latest version of the ROS and Dude?

Thank you!

eriitguy

Hello!

May be related to the compatibility: tool fetch - 2xx HTTP response codes

Thank you!

eriitguy

carnivean, It seems that currently Dude v6 development is postponed. The_Dude_v6/dude_v6.xx_changelog show us that last changes were made in v6.39 - 2017-Apr-27 10:06. ROS changelog shown only one Dude related changes after 6.39. Release 6.40 - What's new in v6.40 (2017-Jul-21 08:45): *) dude - fixe...

eriitguy

lebowski,

Thank you for help!
I have configured a function and probe per you recommendation. Now it look like this:

2017-08-28_084819.png

2017-08-28_084903.png

But I see multiple outages:

2017-08-28_084955.png

And my chart look like this:

2017-08-28_085542.png

eriitguy

uldis,

No chance to manage it remotely then it physically is inaccessible, in another City for example?
We should be able to log in to verify or configure settings when something may be wrong.

Thank you!

eriitguy

uldis,

Another question, is it possible to assign second IP to wAP LTE itself in order to manage it?

eriitguy

uldis, Thank you very much your team to this feature implementation! It may be very usefully in our case. Before starting to use it, we are looking how may we verify if LTE is working fine and pass the traffic? On recent solutions we using script like this: :local PINGCOUNT 5; :local PINGADDRESS &qu...

eriitguy

lelle, It seems that we may try to use the following algorithm: 1. Get list of connections on Windows Client. 2. Identify if exist a required connection is in ESTABLISHED state. 3. Verify if this connection it started by required application. 4. If p.3 not true - restart required service. 1., 2. Get...

eriitguy

Zod,
Did you tried this solution DUDE server cannot upgrade from pc?

eriitguy

Hello, everyone! I'm trying to setup HP Procurve Cpu probe from the following post . Now I have configured: Function Name: Procurve_Cpu Code: oid("1.3.6.1.4.1.11.2.14.11.5.1.9.6.1.0") Probe Name: Procurve_Cpu Type: Function Available: Procurve_Cpu() <> "" Error: if(Procurve_Cpu()...

eriitguy

titansmc,

To what port do you trying to connect?

Thank you!

eriitguy

jonasrita99,

It seems that you may start from Probe Thread

Thank you!

eriitguy

bhesterberg,

Maybe this guide may help you: Dude v6 - Email notification through Gmail

Thank you!

eriitguy

shredhead5150,

you may try find information in this topics:
The Dude CCQ
Mikrotik WISP.- Cacti/THE DUDE How to monitor Signal Level
How to update oid´s in the dude??

eriitguy

bobney,

We use Dude v6 on ESXi without any issue.
Some bugs presents. We reported them and waiting to be fixed.

The Dude Alternatives

eriitguy

CR24,

Patch with spaces should be quoted:

"C:\Program Files\PuTTY\plink.exe" [Device.FirstAddress] -l [Device.UserName] -pw [Device.Password] "/system reboot"

eriitguy

CR24, 1. Download plink.exe https://www.chiark.greenend.org.uk/~sgtatham/putty/latest.html 2. Place it in desired location, for example in C:\Tools 3. Create a custom tool: C:\Tools\plink.exe [Device.FirstAddress] -l [Device.UserName] -pw [Device.Password] "/system reboot" You also may cop...

eriitguy

CR24,

Dude client should be able to run plink.exe, it should knot full path to it.
For more information, please see The_Dude_v6/Tools

Thank you!

eriitguy

manuelm,

What do you mean by retention policy?

In Dude v6 a ROS logging system is used and we can't configure multiple logs with their policy.

One workaround is described above.

Thank you!

eriitguy

apiel1,

May you try to create a Data Source manually like it is described in the forum post, "Create a chart" section?

Thank you!

eriitguy

CR24,

/system reboot

Command/Tool you defined is started on your local PC.

If you want to run a command on remote device from Dude, you may try:

plink.exe [Device.FirstAddress] -P 22 -l [Device.UserName] -pw [Device.Password] "/system reboot"

Thank you!

eriitguy

apiel1,

What version of the Dude do you use?

May you try to create a "Data Source" manually where you can specify % under Unit?

Thank you!

eriitguy

apiel1,

May you show us a Data Source of this chart?

Thank you!

eriitguy

Ikk, We can try to use a Tools and device Custom Fields for this. 1. Add a desired URL in the device properties: Settings --> CustomField1 --> your URL --> Ok 2. Add a new tool: Tools --> + Name: WebCam Command: "C:\Program Files (x86)\Mozilla Firefox\firefox.exe" -new-tab "[Device.Cu...

eriitguy

maxkrok,

As a workaround, to save logs into a file on ROS, we can:

/system logging action add name=dudedisk target=disk disk-file-name="dude-log.txt" disk-lines-per-file=10000 disk-file-count=100 disk-stop-on-full=no
/system logging add topics=dude action=dudedisk

Thank you!

eriitguy

amt,

May you verify if something like this will work?

# On source
dude set enabled=no
dude export-db backup-file=x86-backup-01.db
#
# On destination
dude set enabled=no
dude set data-directory=disk1/dude
dude import-db backup-file=x86-backup-01.db
dude set enabled=yes
system reboot
#

Thank you!

eriitguy

eduardfora,

These topics contain some advises:
Easy way to mass upgrade firmware?
Feature Request : Mass update of configuration

Thank you!

eriitguy

It seems that folder

dude/files/default/mibs

is read-only.

1. I have created folder

dude/files/mibs/liebert

and uploaded all mibs files there.
2. Renamed files from .MIB to .MIB.txt
And now I can see all mibs inside MIB nodes in Dude.

Thank you!

eriitguy

Juicz17,

On what Windows version do you installed Dude Server 4.0b3?

eriitguy

Juicz17,

This video show how we added all our devices and all of them UP: https://youtu.be/ZnmFz_j_PeM

We use Dude v6.
May you try a latest beta - 4.0 beta3 (dude-install-4.0beta3.exe)?

Thank you!

eriitguy

Sorry for off topic

dmitryfromchel,
What do you mean by Cisco SNMP support?

Thank you!
There are empty strings values on SNMP tab on device with ROS > 6.37.5. For example, you can't read interface RxTx.

It working fine with Catalyst WS-C2970G-24T-E
CHR with ROS 6.39.1

Thank you!

eriitguy

Sorry for off topic

dmitryfromchel,
What do you mean by Cisco SNMP support?

Thank you!

eriitguy

Bomber67,

dude v6.xx changelog
v6.38

Removed - Since default Winbox used in the Dude wasn't fully compatible with all RouterOS devices, we removed i completely.

TOOL/WINBOX Disappeared from LIST

eriitguy

alex1,
Our CHR is running in ESXi 6.0 cluster.

Thank you!

eriitguy

alex1, Thank you for your question in the forum thread The Dude v6 server - CCR vs CHR as a platform. I will try to ask my colleagues more details about our virtual environment. Now I see uptime 8 days. It was rebooted but I don't know why, maybe this was done by my colleague. Will monitor what is g...

eriitguy

Maggiore81, We use Email notification in Dude v6 using our internal mail server with very simple setup. Now I have tested Dude v6 with Gmail. Please see attached image of the probe and received test message: https://dl.dropboxusercontent.com/s/l447jdvjcnsh67v/2017-06-13_143722.png Please refer to th...

eriitguy

alex1, We currently use Dude v6 on CHR, all working fine for 150+ devices. We installed a license P1, but it seems that currently we not achieve free limit - 1Mbit/s upload limit. Hardware are following: 1. CPU: 1 2. Memory: 1GB 3. HDD1: ROS - 1 GB. 4. HDD2: Dude - 20 GB. I don't know anything about...

eriitguy

chimaster, I don't know how Dude can be used for this. If you have experience, may I ask you to share it? On the forum is described solution like you currently use with config storing on the CVS - Subversion. In Subversion you can see all diffs of exported configs and also get diff of them on the em...

eriitguy

solucisp,

Did you read the following topic: New device that supports The Dude server package: RB750r3 hEX?

Which Dude version do you use?

Thank you!

eriitguy

If above described logic is one used in current Dude v6, we can have some issue with it. For example: Gateway-WAN goes down 1. Send notification about Gateway-WAN down 2. Stop Gateway-LAN polling Gateway-WAN goes up 1. Send notification about Gateway-WAN up 2. Start polling Gateway-LAN 3. Issue can ...

eriitguy

Hello! We have started to use dependencies in Dude v6. We have one device with LAN and WAN address. For example Gateway-WAN - 10.0.0.1 |-- Gateway-LAN - 192.168.0.1 Gateway-LAN can be up only if Gatewa-WAN is up. When device Gateway-WAN goes down we receiving only notification about its down status....

eriitguy

mariusp,

Some information about this long awaited requests cab be found in the following forum topic: Feature Request: OpenVPN [ovpn] udp tunnels

eriitguy

Hello! In process of setup Dude SMS notification using fetch tool we noticed that it fail on 202 HTTP response code from the web server. As a result script fails and stop. According to the Wikipedia: List of HTTP status codes : 2xx Success This class of status codes indicates the action requested by...

eriitguy

shrek777, We use SMS notification via HTTP request. It looks like this: # # Send SMS # :local notificationtextEncoded "[Probe.Name] on [Device.Name] is now [Service.Status] - [TimeAndDate] - [Service.TimeSinceChanged]"; :local url http://192.168.1.1:1111/sendsms; :local username user; :loc...

eriitguy

kadhim09, As described on Dude v6 installation page : System requirements for server package RouterOS: v6.34rc13 or newer Hardware: Tile - CCR series hardware ARM - RB3011 mmips - hEX (RB750Gr3) RouterOS x86 installations RouterOS CHR environment Your device can be used as a Dude agent . Thank you!

eriitguy

mmc01, Started from Dude v6, Web interface was removed: The Dude is back! v6.34rc test build released : Removed features: * Windows server * Language selection for The Dude client * Web interface Starting from v6.38 is now possible to access Dude map from Webfig: Major changes: Added - Dude now have...

eriitguy

kadhim09,

Starting from Dude v6 it is no more Windows server exist.
In such case you should connect to the Dude server installed on Router OS, for example on your RouterBoard.
You should specify RouterBoard IP for connection.

Thank you!

eriitguy

kadhim09,

Did you specify IP address of the dude server?

eriitguy

Hello!

Please add a possibility to add multiple "To" in Email notification. Something like: user@domain.com, user2@domain.com

And it seems that Dude and Winbox shows different Server address:
Dude
Server Dns Name: smtp.gmail.com

Winbox
Server: 0.0.0.0

Thank you!

eriitguy

Hello, BobInWisc!

Did you find a solution?
We have similar issue with Dude v3.6. Now we have added second address as CC.

Another solution is to use CLI mail clients.

Thank you!

eriitguy

dpilibosian
Thank you for proposal, it will be very usefully!

eriitguy

It seems that builtin Data Sources created when SNMP link is added between devices.

This is the same behavior as in earlier Dude version.

Thanks!

eriitguy

Hello everyone! I'm trying to add a new switch in the Dude v6 in order to create a Charts for its interfaces. In the old Dude v3.6 instance i see multiple builtin Data Sources of the switches interfaces. But in v6 only builtin Data Sources for probes, for example "ping". How they can be cr...

eriitguy

krisjanis, thank you for confirmation!

We will try a latest dude release.

eriitguy

krisjanis

I have similar issue in Dude 3.6 installed on Windows server.

Can someone confirm that this is a bug in version 3.6 and it is fixed in new Dude v6?

Thank you!

Search found 197 matches