After upgrading RB5009UG+S+IN to RoS 7.13 it hangs several times a day. I need to power it off and on to get it working. I have many MT devices ( routers, ap ). All of them are upgraded to 7.13 and all has similar configuration but the problem only occurs on RB5009UG+S+IN ( this is the only one devi...
Trying to upgrade mipbse device from 7.2.1 to 7.2.2. Dude client complaint that "some package unavailable"
Main routeros and extra packages is uploaded to dude server.
Installed packages on device are routeros and lora
Hi, I'm using several MT devices on local network: 1-CCR1009-7G-1C-1S - Main router 2-wAP G-5HacT2HnD_A - First AP 6-RBwAPG-5HacT2HnD.rif - Second AP 3-RBSXTR - LTE Modem - Backup internet 5-CRS305-1G-4S+ - 10G Switch 7-RBwAPR-2nD - Lora Gateway Everything was working corectly on 6.49.5. I've made m...
Device: wAP LTE Kit RouterOS: 6.41rc52 Like You see on the screenshot after device boot SINR, RSRQ RSRP values are correct reported via snmp from device, except RSSI ( showing wrong 0dBm always after reboot ). But after a couple o days ( various time ) something happen on MT device ( blue markers on...
Sorry, but I don't understand your question fully. This device has only one modem interface (LTE). I have also only one APN configure as passthrough to virtual lan ( named vlan400) Here is a short configuration: /interface ethernet set [ find default-name=ether1 ] arp=proxy-arp name=Eth /interface v...
Hi, I have RBwAPR-2nD,6.41rc47. LTE interface is configure as passthrought to VLAN interface. ( ID: vlan400 ). Regularly after some time of working connection thru LTe interface became unavailable. The logs says in this case that: 07:00:49 lte,info LTE: not registred, state: 11 07:00:49 interface,in...
Hi, I recently bought wAP ac access point and have problem with configure 5Ghz band. So in short for below settings all work correctly: Frequency: 5180 Control Channel: 20Mhz Band: 5ghz-a/n/ac Extension C: Ceee I wanted to change frequency channel to middle band A: So: Frequency: 5260 Control Channe...
Awesome. Thank You!, One thing about icmp. I needed to modify second rule to get it work. 14 X chain=forward action=accept connection-state=established,related src-address=192.168.12.0/24 dst-address=192.168.11.0/24 l 15 X chain=forward action=drop connection-state=invalid,new protocol=!icmp src-add...
Hi, I'm stuck with my network configuration. I would like to have 2 subnets: one for my home network and second for IP monitoring. But 'monitoring' subnet should not have access to my home, but I would like to have access to monitoring network from my home network. Shortly: /ip address> print 0 192....