The basic problem is that we use the old RouterOS V6 from 2013. Based on the old kernel 3.3.5
With that is not possible to do miracles in 2019
That is trueThank you very much for this present!
Now if I have a country set I can only use regulatory domain and default scanlist, a real pain in the a*s.
That should be in changelog!
Yes it is 5470-5725Mhz , but it is commonly referred to as I wrote. (fully channels)outdoor is exactly 5470MHz-5725MHz not 5500MHz-5700MHz mentioned by you in older posts .. indoor exactly 5150MHz-5350MHz not 5180MHz-5320MHz mentioned by you.I know this document. What exactly is wrong?
I know this document. What exactly is wrong?THIS IS NOT CORRECT! try to read this link and you will have a CLEAR knowledge which is allowed in Czech Republic and which is not .
And that's the progress New AC - worse than oldI have partially to correct myself: the last firmware still miss the slot but now it works a little bit better but 30% slower than old AC hardware
Up to 8 clientsHow many clients can I connect to an AP?
YesDo I need a simple L4 license to the AP?
up to 1500 metersThe clients are nearly in a line. What maximum distance I could except to the AP?
boot of old rb411 with @300Mhz is more faster1Minute 48 seconds, hap ac2 with 6.43.7
Can you share any results? The same configuration with LEDE and with ROS?My M11G with Lede/ Openwrt and Ath10k performances much better then with Ros!
Are you kidding? It is the end of 2018. We have AC hardware and you consider the 53 Mbit result to be good? With 40Mhz on P2P?You are right, 802.11 is better, but now it can conect in nv2 and work
Please no new 6.44beta...New beta build will be released later today. Had to polish some new features before releasing the version.
Mikrotik reads this topic. They just do not write anything.No wait today is sad day I am installing a new tower with ubiquiti antennas, it's the first without mikrotik
In the afternoon I 'll post some pics!!!!
And? Can you share it with us? Or with firstname.lastname@example.orgI have a full Syslog!You have a proof? For example, screens or something?Fix ROS6.43.3 because I am sure 10000% it is still vulnerable and I saw the proof tonight with a very long fight.
You have a proof? For example, screens or something?Fix ROS6.43.3 because I am sure 10000% it is still vulnerable and I saw the proof tonight with a very long fight.
Hello Normis.rc45 contains Nv2+ARM fix. It will be released within the next 24 hours.
Now deployed into full operation. So far everything seems OKWaiting for everyone in this thread to buy one and test it before ordering mine!Ordered one today since it's now available at several resellers.
+ 1@Normis can you tell us how many time we have to wait for the solution of this problem? If you can't resolve it please tell us, transparency for your customers please.
Hello. It is fixed since 6.43? Why no info in changelog? No info on forum until nowHello, RB3011 Port Flapping problem is addressed by means of a new CPU Flow Control setting in RouterOS v6.43.
Nice result. But now the same test with 6.43.2. ThanksNo special settings. Wlan1 in bridge with Ethernet
Image Pasted at 2018-10-2 12-01.png
mac telnet a web access works for meHello,
We just upgrade two CHR on AWS to last version of RouterOS and now we are not able to login.
Winbox: wrong username or password
SSH: Access denied
I tooIt's a pretty clever way of combining rack-mount capability and desktop case into the same product. Not exactly pretty, but very funktional; I like it.Oh boy, it does look ugly with those rack-mount ears attached.
Yes it is true. Sometimes Mikrotik might be the firstSomeone has to be the first, if all is waiting for all other to release WPA3 it will never come
When? We wait for it half year....We are close to a solution to the Nv2+ARM performance issue, please hold on for a day or two, when we will release the changes in RC release chain, for first testing.
If you need to cover the 30 degree angle, then use 30º. Yes we use all 30 - 90ºWhat a great news, I see some symmetrical novelty that I do not understand very well. What do you recommend the 30º, 60º, 70º, 80 or 90º. Have you tried any?
With devel login you have acces to linux. --> install any binaries. Ideal to make an exploit.doesn't looks like an exploit but rather the way Mikrotik enable the devel login in the internal filesystem
For example there: http://www.cdr.pl/p6320,mikrotik-rb760i ... e-out.htmlIs this a future device? i can't find anywhere to buy it and its not on the mikrotik page, i NEED that sfp port i have a HEX right now and that is my only complain.
It is. Show "H" in Bridge->PortsMake visible/controllable in RouterOS if the ports are in switch mode or in CPU mode.
@mikrotik can you write more info there? viewtopic.php?f=21&t=132181*) wireless - improved Nv2 PtMP performance;
Tell us more, did you work on latency?
Very thanks!!! Work great!
*) wireless - improved compatibility with BCM chipset devices (this includes phones by Xiaomi, Lenovo, etc)
what is the detail of this update:Does it involve also AC standard?*) wireless - improved Nv2 PtMP performance;
Does it require the NV security?
I think on new AC hardware is not possible disable Airmax. There is no posibility connect it (UBNT) with MikrotikLitebeam 5AC 2nd Generation
Normis thanks for fix. But this fix is only for actual devices. There is nothing for MIPSLE. Your statement: all RouterOS devices is not true.Since all RouterOS devices offer free upgrades with just two clicks
Hello. Thanks for info and very thanks for improvement!band=5ghz-a/n channel-width=20/40mhz-Ce un TDMA - 2ms
In BAND - N? Channel width? 40Mhz? TDMA = 2ms or AUTO? More info about config please...In the setup we had a R11e-5HnD as AP and Clients was SXTsq Lite5
Hello. Thanks for your test. I will look forward to continuing the testMy Test today
I will do some further tests and make some photos / screenshots
+1I can't understand why mikrotik don't want to reveal us the future market strategy we need to have this info to plan the future development.
Please tell us If nv2 is no more supported
Please tell us if nv3 is on the way and if it is close to be released
Only 2,4Ghz. On 5Ghz is 150/150MbitDo you have the problem in both bands, 2.4 and also in 5 GHz?I have the same problem with Samsung Galaxy XCOVER 4 and tablet LENOVO YOGA 2
What you see in wireless registration table? Is there max 54Mbit?I can't get anything more then 20 Mbps on download, as for upload it goes up to 50 Mbps
We know about ath10k features, we are using our own wireless driver, where this implementation isn't as straight forward as on ath10kSpectral scan is supported
Source https://wireless.wiki.kernel.org/en/use ... ctral_scan
See this:I can not get tx rate above 54mbps. So my maximum bandwidth from internet is ~24mbps
Not package, but BGP, BW test and other ale single core...Can you give me an example of a package that is not multicore capable ?
Not possible make this link...650 Mbps wireless is the minimum
- installation will be in VERY noisy environment
- use of 5 GHz
And demo3 http://demo3.mt.lv/webfig/#System:Packa ... or_Updates
YesWould like to know if any of below are in the pipeline :
- CAP AC
Any info about this? passive scan has been implemented for a long time*) wireless - added passive scan option for wireless scan mode;
Interesting findings @mikrotik We need ROS optimization...Lets continue I take RB411...
My conclusion is that all issues of WiFi on Mikrotik devices are totaly sowftware problem.
How short link? W60G is up to 100m. (Without reserve up to 130m)W60G
there is no option to adjust txpower? On shortlink we can't get higher than MCS4.
You are right. First wave2 chipset from Mikrotikthe Mikrotik cAP AC just passed FCC compliance and has an 802.11ac Wave2 capable chipset.
So it looks like we will have Wave2 #soon
Have you tried 6.40.4?Same problem here w/ my chinese Xperia Z Ultra... 20mbpsThis issue is currently at low priority, we are not actively working on it, since it will require a lot of resources to fix it.
I'm using RB951G 2hnd... my first, maybe the last MK !
Very useful feature. Thank you. It could be possible to add the last signal when the state is disconnected?*) wireless - log "signal-strength" when successfully connected to AP;
https://wiki.mikrotik.com/index.php?tit ... ronizationThe v6.40 update sounds really good - especially the nv2 stuff.
Would somebody please explain (or point me to information/documentation) on the new nv2 features in v6.40 ?
Ok thanks. Why did not you set up new topic about this problem?Please contact support, there is a special package that should fix it.