No problem. Thanks for your speedy response.Sorry for that
Ah, OK. Thanks.Use netinstall.
Sounds to me like the on-board flash is faulty/dead/dying. Personally, for the cost of the board, I'd just bin it and buy another - there's every probability that even if you re-install and get it working it will die again.kernel not found
/ip firewall filter add action=accept chain=input comment="SNMP" disabled=no dst-port=161 protocol=udp src-address=xxx.xxx.xxx.xxx
If I was asking about link speed, you may have a point, however I was not and so the link method, the antenna used or the colour of my underwear are wholly irrelevant and therefore not mentioned.I was talking about wireless too....you did not tell us your setup so no answers for you
Connect by MAC instead of IP address. If the Winbox loader cannot see the MAC on the network, then you really are in troubleTrying to get Winbox working again, too.
Do you mean that you have 3501 VLAN interfaces defined on your box, or that you have two VLAN interfaces defined (500 and 4000)? Can you give us some more information about your configuration?How I can block forwarding between vlans 500-4000 ?
Mine worked OK, but it took about five minutes before the internal interfaces started working (despite the fact that the CLI showed them to be up and running.First attempt at an upgrade to 3.26 from 3.25 on a x86 box did not succeed.
Mine lets me type user/password (and if I get them wrong, it tells me), but if I get them right, I get a 'failed to connect' error.Would someone please fix the web interface for x86 in the next release?
Depending on what you're graphing, it may be better to consider an independent solution - have you seen the http://forum.mikrotik.com/viewtopic.php?f=2&t=28947 thread?Really need to keep history. Any suggestions.
Sadly, in my experience, any number of small-ish companies who don't want to employ one person to look after their infrastructure and who shares the work out amongst a team of people.Which scenario has multiple network admins that continuosly add/remove firewall filter rules?
Phew, it's good it's not my fault! I did search the forum, but I must have missed your post - sorry for that. I'll e-mail support now.I said, I said!
No. Browsing and downloading are the same thing.browsing usually is a small connection, downloading is longer.
Which is what I have already said.Use "connection-bytes" option in mangle and prioritize first 1Mbps (or more) of every HTTP connection.
It doesn't matter what you call it, downloading a .exe is **exactly** the same as downloading a .JPG. There is no difference.But I think download means save exe,zip,.. files and when we browse web, we download html,jpg,gif,..
Indeed. Like I said, it's more a reflection on my lack of programming prowess than anything else!I'm just unsure of your task... there could be many algorithms =)
I have added another piece of code (using the PHP API) to the wiki which allows the active DHCP leases to be graphed.Currently it looks great! http://wiki.mikrotik.com/wiki/Munin_Monitoring
Can't wait for the rest
You haven't given enough information to allow us to do that.Please help me to optimize the following config.
Am trying it now. Will let you know....Try latest winbox loader.
I guess that depends on your definition of 'secure'.sorry, but I was under the impression that PPTP isn't secure
Wow. Coming from Iraq, you're a very brave man to want to go to the US. You have my utmost admiration!i should start checking with the US embassy to see if i could get the visa
That was the original question. Are you saying that the Atom based unit would not perform equably or better than a RB1000?not to speak about general purpose CPU vs network optimised CPU
Nope. Although the graph now has the correct scale, nothing's being plotted on it (I suspect that what's there is still positive and out of range of the graph.Try setting the upper limit to 1
On the contrary, this is necessarily complicated. How do you think it should be done (bearing in mind changeip's comments about resolving the hostname for every packet)?...this is unnecessarily complicated
Yes, but not directly. You'll have to write a script which resolves the hostname and updates the firewall rule accordingly. You'll then have to schedule the script to run regularly.is there any chance to add firewall rule to DST host not to DST IP
Except that resetting the box will reset the password anyway.It is of course possible even now. You can simply change password and forget it
Silly question, but wouldn't this value be reset along with the rest of the unit? If not, how does one make sure it is reset if one so desires?auto-after-reset-configuration.rsc
Get yourself to the next MUM that you can - The bits on QoS were worth the airfare and hotel alone.Point us to some GOOD easy documentation for queue trees...
You need to specify a SMTP server which will accept e-mails from ROS for onward delivery to yahoo.what can i put here please help
No, I wanted to check I wasn't doing anything silly first!Have you emailed support?
I'm building mine by hand too, I just want to monitor some dynamic PPP interfaces, that's all!As far as my case goes I don't mind since I build every map by hand and I have no dynamic links.
GBP400 flight plus GBP200 for accommodation, so I won't be going! Sad, but times are tough and I've already been to Dallas.how much does flight from Europe to USA cost? =)
Presumably, 'n' is the default.Besides that, in "Current html pages will be lost! Reset anyway? [y/N]:
looks a bit strange: to enter "y" or "N" (smalll, capital letter ?)
There isn't one - you'll have to write it yourself.can you please tell me witch Scheduler srcipt you think good for this?
Yup. I was hoping that Winbox would do something sensible in this regard (spawn child, kill parent?), but I haven't tested it and I suspect that my optimism is unplaced!isn't it possible to obtain command line parameters of any user's process in system? =)
The document linked from http://www.mikrotik.com/thedude.php was enough for me to get a simple configuration set up.Can someone please explain me step by step how to config a dude server and client app so i can see from home how some network at work is doing ?
Yes, I'm seeing this too.i'm using RouterOS 3.20. dude-3-1.npk installed ok and can navigate do http://(mikrotikip)/dude but freezes at login
By which protocol - HTTP, FTP, scp, SMB, NFS, Kermit or another?i wanna know how to limit user download file such as .exe .mp3 .rar .pdf etc in routerOS ver.2.9.X and 3.x
You are quite right - as it exists at the moment, the class expects an immediate response to a command and doesn't work at all well when the response may never come or may come at some point in the future.this works well but there is another problem with this implementation.
Only 40 or so, the problem is when one or more of them are running a P2P or shoutcast clients which launch a large number of simultaneous connect requests.how many users you have to have to get 60 simultaneous requests?
I have edited the original article - without the changes the PHP class simply doesn't work, so it makes no sense to keep the incorrect version listed.NAB would be nice if you could add these to the wiki article
Sadly this doesn't work when the chain has dynamically added rules - as the dynamic rules are added and removed, the 'action=drop' rule moves towards the top of the chain and the following rules are therefore ignored./ip firewall filter add chain=<chain> action=drop
ip firewall filter add action=drop chain=forward comment="" disabled=no src-mac-address=00:00:00:00:00:00