Community discussions

Search found 1314 matches

by mistry7
Tue Jun 11, 2019 9:21 am
Forum: Beginner Basics
Topic: RBwAPG-60ad distance =0.0 ?
Replies: 10
Views: 676

Re: RBwAPG-60ad distance =0.0 ?

Newer Windows: The metallic vapor deposition on the inner pane is transparent to the high-energy short-wave solar radiation. If the sun's rays hit your furniture, walls, ceilings, etc., they absorb the energy from the sun's rays, store it in between, and then release it as heat radiation. The resul...
by mistry7
Mon Jun 10, 2019 12:35 pm
Forum: Beginner Basics
Topic: RBwAPG-60ad distance =0.0 ?
Replies: 10
Views: 676

Re: RBwAPG-60ad distance =0.0 ?

What Kind of Windows?
A newer One?

Use something like this to mount it outside!
https://www.bueromarkt-ag.de/saugheber_ ... oCXEvw_wcB
by mistry7
Mon Jun 10, 2019 11:35 am
Forum: Beginner Basics
Topic: RBwAPG-60ad distance =0.0 ?
Replies: 10
Views: 676

Re: RBwAPG-60ad distance =0.0 ?

how it is mounted? Reflections?
by mistry7
Sun Jun 09, 2019 3:58 am
Forum: Wireless Networking
Topic: Experience with PtP Wireless Wire Dish link
Replies: 3
Views: 616

Re: Experience with PtP Wireless Wire Dish link

Our links under 500m Did not disconnect since installing, this is more Then 12 Month
by mistry7
Sun Jun 09, 2019 3:54 am
Forum: General
Topic: Mikrotik Warrany where in USA?
Replies: 2
Views: 359

Re: Mikrotik Warrany where in USA?

Where die you Buy it? Speak with your Dealer
by mistry7
Sat Jun 08, 2019 3:06 pm
Forum: General
Topic: CANNOT PING MAIN OFFICE LAN DEVICES USING EOIP OVER L2TP WITH IPSEC
Replies: 8
Views: 622

Re: CANNOT PING MAIN OFFICE LAN DEVICES USING EOIP OVER L2TP WITH IPSEC

Yeah and I am a newbie seeking some help. Clearly, your english is worse than my config. Thanks anyway. ✌🏽
This is more about a smartphone and a non english auto correction
by mistry7
Sat Jun 08, 2019 8:13 am
Forum: General
Topic: CAPsMan Error
Replies: 4
Views: 393

Re: CAPsMan Error

please post your config
by mistry7
Sat Jun 08, 2019 5:25 am
Forum: Beginner Basics
Topic: Block IP adress trying to access RDP
Replies: 10
Views: 844

Re: Block IP adress trying to access RDP

Think about VPN and not limiting .......
From Outside direct avaible Services will be Hacked in some case

Look at winbox hack
Look to ubnt
Look were you want, direct exposed Services are an invitation
the only was to do Secure this, is yousing a VPN
by mistry7
Sat Jun 08, 2019 5:15 am
Forum: General
Topic: CANNOT PING MAIN OFFICE LAN DEVICES USING EOIP OVER L2TP WITH IPSEC
Replies: 8
Views: 622

Re: CANNOT PING MAIN OFFICE LAN DEVICES USING EOIP OVER L2TP WITH IPSEC

This Konfig is more Then Worse.... Why L2TP If you Are yousing EOIp Instead ? ( you can do IPSec with eoip directly) And for dyn. IPs there Are other ways, like DynDNS and scripts But EOIP over the Internet will end in MTU Problems Why you don’t yousing L2tp for Bridging? https://wiki.mikrotik.com/w...
by mistry7
Thu Jun 06, 2019 10:31 pm
Forum: Wireless Networking
Topic: "wAP ac kit"
Replies: 2
Views: 457

Re: "wAP ac kit"

Looks like a copy of cap ac with PCIe Slot

Hopefully with POE pass trought
by mistry7
Thu Jun 06, 2019 11:40 am
Forum: Wireless Networking
Topic: RBwAPG-60adkit - no wireless multiple vlan trunk
Replies: 3
Views: 435

Re: RBwAPG-60adkit - no wireless multiple vlan trunk

What so you want to do?

Transparent Bridge?
If yes remove all VLAN Interfaces on WAPs and Disable VLAN Filtering on Bridge, you don’t need that.

If you not want Transparent Bridge we need more Info what you want to Archive
by mistry7
Tue Jun 04, 2019 1:10 am
Forum: General
Topic: RouterOS v7.0 beta1 - when?
Replies: 609
Views: 154568

Re: RouterOS v7.0 beta1 - when?

I just want to let everyone know, that v7 is progressing pretty good this year, and most core functionality is usable. Some more difficult parts need to be done and we can release a public beta.
Can you give some information on what kernel it will be using 4.x or 5.x?
4.xx
by mistry7
Mon Jun 03, 2019 11:07 pm
Forum: General
Topic: RouterOS v7.0 beta1 - when?
Replies: 609
Views: 154568

Re: RouterOS v7.0 beta1 - when?

We droped Mikrotik out of our Core, IPV6 is needed more Then Ever, we will obtain last avaible IPv4 address in the Next 3-4 Month, and Then we need to start CGN NAT
by mistry7
Mon Jun 03, 2019 6:44 am
Forum: Wireless Networking
Topic: Optimize SXT Lite 5 PtP Link , bad CCQ
Replies: 4
Views: 770

Re: Optimize SXT Lite 5 PtP Link , bad CCQ

Hi, it´s for about 500 meters and with 100 mbps aggregate it´s sufficient...

Finally.... lot of tests.... lot of configs, solved with a pair of nanobeam ac gen2

Thanks !!
For 500m you Better Choose a 60Ghz Product
by mistry7
Sun Jun 02, 2019 11:01 am
Forum: Wireless Networking
Topic: LHG 60GHz Wireless Wire [SOLVED]
Replies: 3
Views: 484

Re: LHG 60GHz Wireless Wire [SOLVED]

You need to Remove the w60g-Station Interface, After a connect it is created new
by mistry7
Sat May 25, 2019 10:25 am
Forum: Wireless Networking
Topic: W60G max 8 stations?
Replies: 1
Views: 295

Re: W60G max 8 stations?

If i remember right Normis told us it is Hardware Limit
by mistry7
Sat May 25, 2019 6:29 am
Forum: Wireless Networking
Topic: Metal G-52SHPacn Can not use 2.4Ghz and 5Ghz at same time?
Replies: 1
Views: 252

Re: Metal G-52SHPacn Can not use 2.4Ghz and 5Ghz at same time?

No there is only One Interface so it is impossible to use both Bands at the same time
by mistry7
Fri May 24, 2019 9:31 pm
Forum: Beginner Basics
Topic: Advice on backing a 60GHz link with a private DSL line
Replies: 2
Views: 319

Re: Advice on backing a 60GHz link with a private DSL line

With 60m clear LOS you van espect 1GBit with Wireless Wire you don’t need the dish
by mistry7
Tue May 21, 2019 3:39 pm
Forum: Wireless Networking
Topic: Co-locate LHG 60ad on same mount
Replies: 11
Views: 828

Re: Co-locate LHG 60ad on same mount

Which one works perfect the higher mounted one?
by mistry7
Sun May 19, 2019 10:50 pm
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 579
Views: 60047

Re: ARM devices and NV2 protocol

Now time for fix 40 MHz channel in this moment max speed only 150 Mbit for TCP :( + 1 Tried to use 40MHz instead of 20MHz using nv2 many years ago on a link that was up for nearly 7 years. It was rock solid but it did not become faster than 20MHz, in fact no differences at all. Flat out speed was a...
by mistry7
Sat May 11, 2019 11:39 pm
Forum: RouterBOARD hardware
Topic: LHG Lite60 [SOLVED]
Replies: 4
Views: 621

Re: LHG Lite60 [SOLVED]

You Are in Europe?
It Did not get CE, so it is not possible to sell it in EU

viewtopic.php?t=143935
by mistry7
Sat May 11, 2019 3:56 pm
Forum: Announcements
Topic: v6.45beta [testing] is released!
Replies: 305
Views: 71020

Re: v6.45beta [testing] is released!

which is even more important for you?
maybe another fix LCD?
no, KidControl.......
by mistry7
Tue May 07, 2019 8:22 am
Forum: RouterBOARD hardware
Topic: Need 3 WiFi AC Card
Replies: 3
Views: 576

Re: Need 3 WiFi AC Card

Why Using cards in One Board and not a all Outdoor Solution like SXt / QRT / etc?
by mistry7
Sat May 04, 2019 3:45 am
Forum: General
Topic: SXT 2 Discontinued?
Replies: 3
Views: 344

Re: SXT 2 Discontinued?

On Stock in Germany
by mistry7
Thu May 02, 2019 11:28 am
Forum: Wireless Networking
Topic: WiFi4EU
Replies: 8
Views: 1770

Re: WiFi4EU

Any news from Mikrotik?

Wifi4EU completed (in April 2019) the second call and other thousands of municipality will receive their voucher..

This is a very very big opportunity for Mikrotik
They will need years to get close to competitors
by mistry7
Wed May 01, 2019 5:03 pm
Forum: General
Topic: be careful! 6.44.x should not marked as stable!
Replies: 6
Views: 1055

Re: be careful! 6.44.x should not marked as stable!

Yesterday we had a Sxt Link that was down for unknown reason, reboot solved it, just loose Connection and Did not Come back

SXt HG ac
802.11
P2P
by mistry7
Thu Apr 25, 2019 3:22 am
Forum: Wireless Networking
Topic: wAP 60Gx3 problem
Replies: 7
Views: 861

Re: wAP 60Gx3 problem

That is Bad news, we want to Test this Sector in the Next Week in real Setup
by mistry7
Mon Apr 22, 2019 7:11 am
Forum: General
Topic: victim of attack PPPOE
Replies: 10
Views: 882

Re: victim of attack PPPOE

Whats your Problem, of this User does not have valid usernane and Password, what should je do? This Messages Are Not an real Attack, Of the MaC Adresse change Every Time, this would I Call an attack If you do the PPPOE config on your SXT eg, this is an Mikrotik Device. Look at Mac, Look at AP Regist...
by mistry7
Tue Apr 16, 2019 2:11 pm
Forum: Wireless Networking
Topic: NV2 PtMP - good signal and ccq but low throughput
Replies: 6
Views: 710

Re: NV2 PtMP - good signal and ccq but low throughput

Well, i expected more. On 135Mpbs rate it should be 60Mbps stable with those signal levels and ccq.
135 Mpbs is max Brutto, its WiFi, with an old 54Mbit 802.11a you got about 20Mbit
And your CCQ shows that your spectrum is not clear....
by mistry7
Tue Apr 16, 2019 11:14 am
Forum: Wireless Networking
Topic: NV2 PtMP - good signal and ccq but low throughput
Replies: 6
Views: 710

Re: NV2 PtMP - good signal and ccq but low throughput

Your CCQ rates are not good, and what do you think you get with 1 Chain?
by mistry7
Mon Apr 15, 2019 1:00 pm
Forum: Wireless Networking
Topic: 3.6 Km Ptp Link -- bad RX ccq and BW [SOLVED]
Replies: 7
Views: 726

Re: 3.6 Km Ptp Link -- bad RX ccq and BW [SOLVED]

What Devices you are using?
I Think Antennas are too small for this distance
by mistry7
Wed Apr 10, 2019 10:26 am
Forum: General
Topic: LNS Server latency issues
Replies: 5
Views: 377

Re: LNS Server latency issues

Please Show :

/tool profile cpu=all
by mistry7
Wed Apr 10, 2019 9:38 am
Forum: General
Topic: LNS Server latency issues
Replies: 5
Views: 377

Re: LNS Server latency issues

how much users?
CPU using per Core?
is that a direct connection between LAC and your LNS or do you get this L2TP Tunnel over the Internet?
by mistry7
Fri Apr 05, 2019 11:59 am
Forum: General
Topic: v6 RC and v7 BETA
Replies: 126
Views: 24401

Re: v6 RC and v7 BETA

When I can use ROS v7 ?
On Christmas but you don't know the year......
by mistry7
Sat Mar 30, 2019 11:23 am
Forum: General
Topic: UKNOF 43 CVE
Replies: 223
Views: 39986

Re: UKNOF 43 CVE

Mistry7, Good call moving off of mikrotik for security reasons. I couldn't agree more. I did too for some things. Today is a security day for us Cisco fans too. There are 17 flaws to fix. Have you seen this. https://www.networkworld.com/article/3384742/cisco-warns-of-two-security-patches-that-dont-...
by mistry7
Sat Mar 30, 2019 10:37 am
Forum: General
Topic: UKNOF 43 CVE
Replies: 223
Views: 39986

Re: UKNOF 43 CVE

Mikrotik what is need to happen that you are wake up and get ROS 7 with newer Kernel ready?

ROS Kernel is from 2012!

Good for us, we removed all Mikrotik at Core Routers in the last 3 Month, because of bad BGP Speed, and Missing IPv6 PPPoE Features
No i Think that was a very good decision!
by mistry7
Fri Mar 29, 2019 6:56 am
Forum: Wireless Networking
Topic: 34km link low CCQ
Replies: 13
Views: 1237

Re: 34km link low CCQ

We have no good Experience with Mikrotik at links with more then 10km
We build them with UBNT Airfiber, they Performe much better over such distances, I have a similar link here
32km
34 dBi Dishes
36 dBm allowed
Total BW 260MBit with 40Mhz Channel
Splitt into 200 down / 60 Up
by mistry7
Thu Mar 28, 2019 10:47 pm
Forum: Wireless Networking
Topic: New standard 802.11ax
Replies: 25
Views: 6659

Re: New standard 802.11ax

is there even any AC pci cards we could test on a routerboard? There is hardware: https://wikidevi.com/wiki/List_of_802.11ax_Hardware But you need to convince MT to build a driver. Nobody builds their own drivers. The majority of the driver and software stack for the chipset is from qualcomm and ev...
by mistry7
Thu Mar 28, 2019 10:43 pm
Forum: Wireless Networking
Topic: 34km link low CCQ
Replies: 13
Views: 1237

Re: 34km link low CCQ

Is this a shot over Water?
by mistry7
Wed Mar 27, 2019 8:33 am
Forum: Wireless Networking
Topic: RB4011iGS+5HacQ2HnD-IN->AC Wifi issue
Replies: 2
Views: 415

Re: RB4011iGS+5HacQ2HnD-IN->AC Wifi issue

Your USB standart?
USB 2 maxes out at 480MBit theoretically, so 300MBit over USB2 would be good speed
by mistry7
Mon Mar 25, 2019 8:21 am
Forum: Wireless Networking
Topic: More powerful 24v power supply for Powerbox?
Replies: 2
Views: 566

Re: More powerful 24v power supply for Powerbox?

Use better cables!
by mistry7
Sun Mar 24, 2019 7:13 pm
Forum: General
Topic: OpenWRT on Mikrotik
Replies: 2
Views: 401

Re: OpenWRT on Mikrotik

The RouterOS IPv6 support is not enough for me, so I need Linux kernel 4.x functions. The OpenWRT 18.06.2 use Linux kernel version 4.9 or 4.14. I found a list, which devices are supported: https://openwrt.org/toh/start?dataflt%5BBrand*%7E%5D=MikroTik How do I install OpenWRT? How do I reinstall the...
by mistry7
Sat Mar 23, 2019 11:25 pm
Forum: RouterBOARD hardware
Topic: LHG 60G rev 2?
Replies: 11
Views: 1327

Re: LHG 60G rev 2?

The PCB print says LHG 60G x8 ... and there's already a topic about it . This topic is NOT about this. Your link is about wAP 60Gx3 (180 degree sector) and there is no 5Ghz radio on PCP. But LHG60G r2 have ch0 on pcb and shielding plate. In winbox not. Maybe in future. More info from @Mikrotik? Wha...
by mistry7
Sat Mar 23, 2019 11:19 pm
Forum: RouterBOARD hardware
Topic: Mikrotik QRT VS DynaDish
Replies: 9
Views: 1307

Re: Mikrotik QRT VS DynaDish

Hi, the Antenna Pattern are the difference, and the device shielding to the back. QRT works better in noisy environment. But both Antennas has big side lobes, and asymetric pattern. we are waiting for this one, because of small side lobes an high antenna gain in hole spectrum: https://www.rfelement...
by mistry7
Sat Mar 23, 2019 12:51 pm
Forum: RouterBOARD hardware
Topic: LHG 60G rev 2?
Replies: 11
Views: 1327

Re: LHG 60G rev 2?

@honzam

where did you get these Pictures?
by mistry7
Fri Mar 22, 2019 8:12 pm
Forum: General
Topic: LHG5 AC in N mode at 10 MHz
Replies: 5
Views: 368

Re: LHG5 AC in N mode at 10 MHz

I don´t think so
by mistry7
Fri Mar 22, 2019 6:44 am
Forum: RouterBOARD hardware
Topic: wAP 60Gx3 AP - anyone already tested it?
Replies: 7
Views: 888

Re: wAP 60Gx3 AP - anyone already tested it?

I'd love to try 60ghz out in some of our busier areas mostly because 5ghz is super noisy. Wap has 3 Antenna Elements but uses only one Channel, the maximum is 8 Clients not 24. All distances over 150m with WAP to WAP. Or WAP to sXT needs 5 GHz Backup, with LHG with more then 500m, but they need it ...
by mistry7
Thu Mar 21, 2019 9:53 pm
Forum: RouterBOARD hardware
Topic: wAP 60Gx3 AP - anyone already tested it?
Replies: 7
Views: 888

Re: wAP 60Gx3 AP - anyone already tested it?

Also "CH0 5G" - 5GHz backup, unpopulated again
they are digging their own grave!
by mistry7
Thu Mar 21, 2019 4:57 am
Forum: Wireless Networking
Topic: Equipment Recommendation for Wireless Backbone
Replies: 4
Views: 392

Re: Equipment Recommendation for Wireless Backbone

How much CPEs?
How much Clients per CPE at the local wiFi for Client Apps?
System Distances?
by mistry7
Mon Mar 18, 2019 11:09 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 547
Views: 63462

Re: LHG 60G experience

Hej guys, I have 750m PTP link to do and three small 230V wires by the road between these two points. Is it ok to use LHG60 kit ? I don't need 1Gbps throughput, 300Mbps will be ok. What about rain and snow, I want to sleep well :-) You need to point very well, and the money for solid mount is a goo...
by mistry7
Mon Mar 18, 2019 10:58 pm
Forum: Wireless Networking
Topic: 50 km LINk
Replies: 6
Views: 528

Re: 50 km LINk

Yes, longest link is 32km, 36 dBm EIRP, 34 dBIDishes, 250MBit real TCP
That's 36 dBm Tx power or 2 dBm Tx power?
2 db tx power
by mistry7
Mon Mar 18, 2019 7:07 pm
Forum: Wireless Networking
Topic: 50 km LINk
Replies: 6
Views: 528

Re: 50 km LINk

Yes, longest link is 32km, 36 dBm EIRP, 34 dBIDishes, 250MBit real TCP
by mistry7
Mon Mar 18, 2019 12:17 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 547
Views: 63462

Re: LHG 60G experience

Mikrotik is wasting 18 months of advantage on 60 GHZ, is it possible to know if there is any hardware with 5 ghz backup in the close future? Why? UBNT will deliver such product, and there would be an AP as well, so why ask them here thinks that they know from the beginning of there 60 GHz Productli...
by mistry7
Mon Mar 18, 2019 9:34 am
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 547
Views: 63462

Re: LHG 60G experience

I am reporting some weird findings. The device is connected on an HP A5500 48port PoE+ switch worth 7,000+ euros. There are 3 other LHG60 on the same switch all working properly/normally. There are 35 VoIP phones on the same switch all working properly. Even when switching off the PoE power from th...
by mistry7
Mon Mar 18, 2019 9:30 am
Forum: Wireless Networking
Topic: 50 km LINk
Replies: 6
Views: 528

Re: 50 km LINk

Possible, speed depends on your allowed EIRP.
in the EU with 30/36dBm max it would be hard to get this speed with 802.11 Hardware.

If your Budget allowes it, I would go with UBNt AF5x HD
by mistry7
Sun Mar 17, 2019 7:12 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 547
Views: 63462

Re: LHG 60G experience

Bad news for mikrotik
60ghz.png
please original link ???
This is early access shop, you need to be registered and allowed to see this
by mistry7
Sun Mar 17, 2019 6:54 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 547
Views: 63462

Re: LHG 60G experience

Bad news for mikrotik
60ghz.png
Yes and they do it right from the beginning, integrated 5 GHz Backup....
And Mikrotik engeneers are sleeping....
by mistry7
Sat Mar 16, 2019 6:26 am
Forum: RouterBOARD hardware
Topic: MikroTik RouterBOARD RBM11G??????
Replies: 2
Views: 397

Re: MikroTik RouterBOARD RBM11G??????

Can a 4x4 card be used on this RouterBOARD RBM11g?
THANK YOU
At this Moment the only Chipset that is Support 4x4 is the One in the 4011, and it looks like the Driver only works on ARM based boards, so not for the M11G
by mistry7
Wed Mar 13, 2019 1:44 pm
Forum: RouterBOARD hardware
Topic: MUM Europe 2019: new hardware
Replies: 61
Views: 11896

Re: MUM Europe 2019: new hardware

Well, these all new PowerLine devices are ok, but what about MT outdoor wireless? Has MT mentioned any plans to introduce some new AP? Or we're stuck with good ol' RB912/92x?
nothing new.......
Thats good news after the ARM NV2 desaster.......
by mistry7
Sun Mar 10, 2019 9:39 pm
Forum: General
Topic: EOIP TCP problem
Replies: 6
Views: 540

Re: EOIP TCP problem

Look into L2TP BCP Bridging, it works better
https://wiki.mikrotik.com/wiki/Manual:B ... _bridging)
by mistry7
Sun Mar 10, 2019 7:56 pm
Forum: RouterBOARD hardware
Topic: MUM Europe 2019: new hardware
Replies: 61
Views: 11896

Re: MUM Europe 2019: new hardware

At this point I'd take a 1U server with an Intel Xeon with a bunch of SFP+ cards jammed in the front and a Mikrotik logo stuck on.
Impossible with 3.xx Kernel, and missing support for actually Hardware
by mistry7
Sun Mar 10, 2019 7:36 pm
Forum: Wireless Networking
Topic: HD video over ptp 60Ghz wirless wire
Replies: 3
Views: 322

Re: HD video over ptp 60Ghz wirless wire

Are you 100% sure that your converter outputs standard Ethernet frames?
In most CaSes this is not IP Traffic, it is only an range extender, No IP Converter
by mistry7
Sat Mar 09, 2019 7:19 am
Forum: RouterBOARD hardware
Topic: MUM Europe 2019: new hardware
Replies: 61
Views: 11896

Re: MUM Europe 2019: new hardware

Great hardware.
If the software would be on the same niveau as the hardware is, I'd start buying mikrotik again.
Good point!
by mistry7
Thu Mar 07, 2019 10:38 pm
Forum: RouterBOARD hardware
Topic: MUM Europe 2019: new hardware
Replies: 61
Views: 11896

Re: MUM Europe 2019: new hardware

Easy to answer sarcasm on 1- Are 1-MikroTik 802.11ax Plans in 2019? We don’t tell anyone 2- When will software support be provided to take full advantage of the features of existing 802.11ac wave2 products? Would be fixed with ROs 7 3- Is there a prospective study of MikroTik for the current Flagshi...
by mistry7
Thu Mar 07, 2019 6:19 pm
Forum: RouterBOARD hardware
Topic: MUM Europe 2019: new hardware
Replies: 61
Views: 11896

Re: MUM Europe 2019: new hardware

Was this the big European MUM? Or is that one in April?
There seems to have been no live stream.
Yes that is the big MUM (tomorrow too)
and yes there is a live stream...
by mistry7
Thu Mar 07, 2019 12:38 pm
Forum: RouterBOARD hardware
Topic: MUM Europe 2019: new hardware
Replies: 61
Views: 11896

Re: MUM Europe 2019: new hardware

No new 60 ghz device with 5 ghz backup? First things first More and more, there is no wireless future in Mikrotik Product Roadmap........ Yes. No 802.11ax, not mentioned Terragraph (https://blog.mikrotik.com/announcements/mikrotik-accelerates-the-adoption-of-60-ghz-technologies-with-terragraph.html...
by mistry7
Thu Mar 07, 2019 12:08 pm
Forum: RouterBOARD hardware
Topic: MUM Europe 2019: new hardware
Replies: 61
Views: 11896

Re: MUM Europe 2019: new hardware

No new 60 ghz device with 5 ghz backup?
First things first

More and more, there is no wireless future in Mikrotik Product Roadmap........
by mistry7
Thu Mar 07, 2019 11:46 am
Forum: RouterBOARD hardware
Topic: MUM Europe 2019: new hardware
Replies: 61
Views: 11896

Re: MUM Europe 2019: new hardware

Real Mikrotik,

Ethernet over 1,5km?
The big cost of fiber optic access is not the fiber and fiber hardware. Civil engineering is the most expensive, so why copper laying on the ground?
by mistry7
Wed Mar 06, 2019 10:59 am
Forum: Announcements
Topic: v6.45beta [testing] is released!
Replies: 305
Views: 71020

Re: v6.45beta [testing] is released!

With 802.11ax the chipsetvendors have to put a lot of stuff into the chipset which helps WISPs. There is Scheduling, there is OFDMA. MT do not have to implement it. It is just there and it is vendor neutral. This is the way to go as fast as possible. You try to ride a dead horse ... And this featur...
by mistry7
Wed Mar 06, 2019 9:25 am
Forum: Announcements
Topic: v6.45beta [testing] is released!
Replies: 305
Views: 71020

Re: v6.45beta [testing] is released!

Don´t cry for next new Hardware, we had to wait over 12 Month for new Arm Chipsets to get running in most cases, most here had buyed 802.11n Hardware until there is no working 802.11ac available from Mikrotik, Wave2 is completely unsupported (most available devices from MT has Wave 2 Chipset). So do...
by mistry7
Tue Mar 05, 2019 5:43 pm
Forum: Announcements
Topic: v6.45beta [testing] is released!
Replies: 305
Views: 71020

Re: v6.45beta [testing] is released!

Will a new wireless driver package for 802.11ac be released in 6.45 or is it planned for a later RouterOS version?
Do you have any specific information about something to happen?
Normis told that in an another thread, but he did not say it will happen this year
by mistry7
Tue Mar 05, 2019 4:47 pm
Forum: Wireless Networking
Topic: Back to back LHGG-60ad Ptp link (relay) [SOLVED]
Replies: 10
Views: 775

Re: Back to back LHGG-60ad Ptp link (relay) [SOLVED]

Devices Are able to use 4 not overlapping channels, so what is your problem?
by mistry7
Sat Mar 02, 2019 12:00 pm
Forum: Wireless Networking
Topic: 60Ghz 2.4km - possible?
Replies: 41
Views: 6033

Re: 60Ghz 2.4km - possible?

@2mailwelkom How your 3255m link is stable during rain events? it will drop every light rain, that is known fact @60Ghz and Distances longer than 1500m...... My links with 800-1000m are almost stable and only drops with very very hard rain, and then only for short time. Links under 700m are really ...
by mistry7
Thu Feb 28, 2019 10:22 am
Forum: General
Topic: RouterOS v7.0 beta1 - when?
Replies: 609
Views: 154568

Re: RouterOS v7.0 beta1 - when?



Nothing has changed from that time. Please suggest what answer you wanted to hear.
We are not able to do Business decisions with a maybe or "in near future"
by mistry7
Thu Feb 28, 2019 2:50 am
Forum: General
Topic: RouterOS v7.0 beta1 - when?
Replies: 609
Views: 154568

Re: RouterOS v7.0 beta1 - when?

Sry Mikrotik - your public relations behaviour is a total desaster when it comes to this topic. This is a user forum. So I don‘t expect u guys to do the right thing nor do I expect that u even know the truth. We all know that here and there especially software projects might end in a desaster. In c...
by mistry7
Wed Feb 27, 2019 12:00 pm
Forum: General
Topic: RouterOS v7.0 beta1 - when?
Replies: 609
Views: 154568

Re: RouterOS v7.0 beta1 - when?

Sorry to break the news to some of you, but the official stance has always been - use v6. We are working on v7, and it will be released when it will be ready. Correct, that indeed is the thing you keep telling us. The problem we have is that for many years now you refer to this V7 and there even is...
by mistry7
Wed Feb 27, 2019 11:50 am
Forum: Wireless Networking
Topic: What happened to Mikrotik Wireless?
Replies: 3
Views: 511

Re: What happened to Mikrotik Wireless?

You should make support tickets or separate topics for each of these issues. In general, there are no known issues with wireless right now. You can get really good speeds with MacBook and cAP ac or RB4011 wifi model. What do you want to get? -supout from CAP AC and Caps Controller? when it happened?
by mistry7
Wed Feb 27, 2019 11:40 am
Forum: Wireless Networking
Topic: What happened to Mikrotik Wireless?
Replies: 3
Views: 511

What happened to Mikrotik Wireless?

Dear Mikrotik, what happened to the Wireless Speed we had in 2010-2014? Your own 802.11n hardware is outperforming your 802.11ac in most cases. Today we Test Ligowave NFT 3ac Lite, they easily outperform my CAP AC / WAP AC and 4011 in all disciplines - 2G Coverage and throughput is better - 5G Cover...
by mistry7
Fri Feb 22, 2019 7:27 am
Forum: Wireless Networking
Topic: Selection guide for PtP links Ranges?
Replies: 10
Views: 570

Re: Selection guide for PtP links Ranges?

You really didn't answer a single question or provide any information I didn't already know. Your post was nothing more than spam. I will move onto another vendor for wifi links over distance. You need to be more specific to get an specific answer! - needed speed of the link - distance - line of si...
by mistry7
Thu Feb 21, 2019 3:28 pm
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 579
Views: 60047

Re: ARM devices and NV2 protocol

I cant see rc3 firmware!!!
Where can download?
No one is talking about RC2 or RC3, we talk about Wireless Protocol NV2
by mistry7
Tue Feb 19, 2019 9:16 pm
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 579
Views: 60047

Re: ARM devices and NV2 protocol

Hello anyone has tried the new Version 6.44rc1 ? Wait for RC2: In the near future a new testing version will released (6.44rc2) that includes updates regarding nv2 issues with various software architectures. The next rc will not have any new features next rc fixes only issues with current features
by mistry7
Sat Feb 16, 2019 9:29 pm
Forum: Announcements
Topic: v6.44rc [testing] is released!
Replies: 67
Views: 12363

Re: v6.44rc [testing] is released!

*) wireless - improved system stability for all ARM devices with wireless; *) wireless - improved system stability for all MIPSBE devices with 802.11ac wireless; I can't find the posting anymore, but (Normis?) mentioned that there will be a new wireless driver package, but he didn't mention the tim...
by mistry7
Fri Feb 15, 2019 11:53 am
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 547
Views: 63462

Re: LHG 60G experience


should know the correct TX-sector (not the center). Mikrotik, please finally post the LHG60 emission diagrams, please!
+1
by mistry7
Wed Feb 13, 2019 10:10 am
Forum: Beginner Basics
Topic: 100 mbps limit in p2p
Replies: 12
Views: 1006

Re: 100 mbps limit in p2p

And your device is?
by mistry7
Mon Feb 11, 2019 12:36 pm
Forum: RouterBOARD hardware
Topic: PowerBox powering options
Replies: 10
Views: 866

Re: PowerBox powering options

Another idea: put a mUPS on the tower before powerbox. According to brochure it boosts PoE out to 24V if input is lower than that ... and you don't have to install batteries if power outages are not a concern. Price tag is not outrageous either. Mups drops Poe dto. 12v in battery mode, with this ba...
by mistry7
Mon Feb 11, 2019 8:29 am
Forum: RouterBOARD hardware
Topic: PowerBox powering options
Replies: 10
Views: 866

Re: PowerBox powering options

Try these:

https://mikrotik.com/product/rbgpoe_con_hp

Or a power supply with 28/30v
by mistry7
Mon Feb 11, 2019 8:22 am
Forum: General
Topic: Ether bonding strange solution
Replies: 15
Views: 1842

Re: Ether bonding strange solution

I would go with this solution:

https://mikrotik.com/product/s_rj10
by mistry7
Mon Feb 11, 2019 8:18 am
Forum: General
Topic: DHCP Client brige l2tp tunnel [SOLVED]
Replies: 12
Views: 1371

Re: DHCP Client brige l2tp tunnel [SOLVED]

https://wiki.mikrotik.com/wiki/Manual:B ... _bridging)

Put the WiFi Interface in the Bridge and you got what you want
by mistry7
Fri Feb 08, 2019 4:01 pm
Forum: Wireless Networking
Topic: Wireless Wire - expected throughput?
Replies: 8
Views: 953

Re: Wireless Wire - expected throughput?

Thanks Anton, so I guess Wireless Wire will be the logical upgrade to my wireless bridge this spring :-) Got one more questions regarding wall mounting ... which mounting solution would I pick for direct wall mounting to be able to adjust horizontally and vertically?: https://mikrotik.com/product/Q...
by mistry7
Fri Feb 08, 2019 9:11 am
Forum: General
Topic: 802.11ac Wave2 Support?
Replies: 33
Views: 7394

Re: 802.11ac Wave2 Support?

- they incompatible to some Intel and Apple devices Not true, new betas fix the issue with Apple and the issue is with Apple new driver, not RouterOS driver. I have done picture with HP Laptop and 4011 still 54MBit, IPhone connects with full speed, not solved in actual Beta! have you checked the ch...
by mistry7
Fri Feb 08, 2019 8:45 am
Forum: Wireless Networking
Topic: 802.11ax [SOLVED]
Replies: 118
Views: 19197

Re: 802.11ax [SOLVED]

I only use ARMs as clients and I don't see any problem. I have throughput problem even with mibsbe in some cases, especially for client upload, or with NetMetal + mANT I only get 50Mbps throughput when with other vendors I get 200Mbps, but I think it's a mANT problem. Just setup an Omnitik ac, conn...
by mistry7
Thu Feb 07, 2019 11:58 pm
Forum: Scripting
Topic: new product MUPSBOX
Replies: 1
Views: 659

Re: new product MUPSBOX

PDF in Russian are useless for most people here
by mistry7
Thu Feb 07, 2019 10:16 pm
Forum: Wireless Networking
Topic: 802.11ax [SOLVED]
Replies: 118
Views: 19197

Re: 802.11ax [SOLVED]

I'd prefer to see ax based protocol than Wave 2 ac
You want to get next Beta Tester, buy arm that’s Beta enough
by mistry7
Thu Feb 07, 2019 9:18 pm
Forum: Wireless Networking
Topic: 802.11ax [SOLVED]
Replies: 118
Views: 19197

Re: 802.11ax [SOLVED]

Come on MikroTik support, at least tell us if you're planning something or not.
Normis wrote on other Topic that they develop new driver with wave 2 support, but we don’t no when it is available
by mistry7
Thu Feb 07, 2019 8:13 pm
Forum: General
Topic: 802.11ac Wave2 Support?
Replies: 33
Views: 7394

Re: 802.11ac Wave2 Support?

- they incompatible to some Intel and Apple devices
Not true, new betas fix the issue with Apple and the issue is with Apple new driver, not RouterOS driver.
I have done picture with HP Laptop and 4011 still 54MBit, IPhone connects with full speed, not solved in actual Beta!
by mistry7
Thu Feb 07, 2019 8:06 am
Forum: Wireless Networking
Topic: 802.11ax [SOLVED]
Replies: 118
Views: 19197

Re: 802.11ax [SOLVED]

We had the same issue in amateur packet radio and it was solved in the nineties. The solution was called DAMA and I think it is much like NV2 and AirMax, maybe less a few of the special optimizations. It is unbelievable that 25 years later there still is no 802.11xx standard that covers this and ca...
by mistry7
Thu Feb 07, 2019 7:47 am
Forum: General
Topic: 802.11ac Wave2 Support?
Replies: 33
Views: 7394

Re: 802.11ac Wave2 Support?

I'm aware that there are products now available using Wave 2 chipsets; hAP AC2, cAP AC, RB4011. However, does anyone know if the MU-MIMO functions or beamforming are currently supported and functioning in routerOS? And what I'm even more interested in is in the devices that are only 2x2 MIMO, is th...
by mistry7
Thu Feb 07, 2019 7:41 am
Forum: RouterBOARD hardware
Topic: Why people pair UBNT APs with MikroTik routers?
Replies: 55
Views: 29823

Re: Why people pair UBNT APs with MikroTik routers?

Indoor: UniFi performs better than Capsman UniFi Devices had better Range than WAPac and CAPac Outdoor: Mikrotik with ARM Based Chipset is completely unusable, unstable Connections, ping lags, disconnects, TDMA not working with ARM, no Spectral Scan AirMax and other like Mimosa are miles away With S...
by mistry7
Wed Feb 06, 2019 1:05 pm
Forum: General
Topic: RB911G-5HPacD not showing Tx Power in winbox [SOLVED]
Replies: 13
Views: 3527

Re: RB911G-5HPacD not showing Tx Power in winbox [SOLVED]

Somehow, this doesn't feel "solved"... :( I'm trying to use the MikroTik link calculator on a pair of existing QRT 5 ac units, to make sure the results agree with current reality before doing the calculations for a planned upgrade. The configurator says the radio power is 27 (and won't let me chang...
by mistry7
Tue Feb 05, 2019 9:36 pm
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 579
Views: 60047

Re: ARM devices and NV2 protocol

It is a disgrace that in recent years Mikrotik on wireless cough, now is not done a spectral scan for AC !!!! Shame Still showing devices with ARM very poor transmission parameters with NV2, why long ago does not work on NV3 ???? Instead, new and new features are being made, but old things are coug...
by mistry7
Tue Feb 05, 2019 4:47 pm
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 579
Views: 60047

Re: ARM devices and NV2 protocol

From support: Hello, Unfortunately, our development team has been unsuccessful to fix the issue with ARM ac chips combined with nv2 yet. It is still being worked on, but perhaps a new TDMA protocol will be developed to support our new chip-sets, if the issue will not be resolved. Apologies for the ...
by mistry7
Mon Feb 04, 2019 10:16 pm
Forum: Wireless Networking
Topic: Wireless FAQ
Replies: 68
Views: 57291

Re: Wireless FAQ

Hi,
Please can someone tell me what is real TCP bandwidth with DynaDish 5 at around 2,5-3km ?
Depends on link conditions
- spectrum usage
- eirp
- LOS ( Line of Sight)

Please tell Is your Minimum
by mistry7
Sun Feb 03, 2019 11:22 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 547
Views: 63462

Re: LHG 60G experience

Hi All I have a question there is an hardware power tx difference from WAP60G and LHG60G? SXTsq60 - antenna gain 10-13,5dBi,(depending on channel, lowest gain is on 62GHz), tx power max 363mW / 25,6dBm WAP60G - antenna gain 10-13,5dBi (depending on channel, lowest gain is on 62GHz), tx power max 14...
by mistry7
Sat Feb 02, 2019 9:38 am
Forum: Wireless Networking
Topic: LHG5 True Maximum Distance Wireless Range
Replies: 2
Views: 341

Re: LHG5 True Maximum Distance Wireless Range

Hi,

how much EIRP is possible in your Location?
Is the Spectrum free?
How much Bandwidth you want to archive?

mistry7
by mistry7
Fri Feb 01, 2019 10:25 pm
Forum: Wireless Networking
Topic: 802.11ax [SOLVED]
Replies: 118
Views: 19197

Re: 802.11ax [SOLVED]

ARM works very well. The only issue I know of, is lack of full compatibility with legacy Nv2 protocol. Any other problems? Test 2x ARM Bridge. Not stable & slower than MIPSBE. The same problem. NV2 is slower and have other issues. Nstreme is also slow. Best is 802.11, but this is not suitable for p...
by mistry7
Fri Feb 01, 2019 6:30 pm
Forum: Wireless Networking
Topic: 802.11ax [SOLVED]
Replies: 118
Views: 19197

Re: 802.11ax [SOLVED]

ARM works very well. The only issue I know of, is lack of full compatibility with legacy Nv2 protocol.
Any other problems?
Test 2x ARM Bridge. Not stable & slower than MIPSBE.
For us the same, ping lags on arm Based CPE, VoIP not possible
by mistry7
Thu Jan 31, 2019 10:45 pm
Forum: Wireless Networking
Topic: 802.11ax [SOLVED]
Replies: 118
Views: 19197

Re: 802.11ax [SOLVED]

Yes sure, you can become the next unpaid Beta Tester

ARM Hardware is now avaible for 13 Month, and does not work as aspected....
by mistry7
Thu Jan 31, 2019 5:13 pm
Forum: Announcements
Topic: February Newsletter #87
Replies: 65
Views: 14407

Re: January Newsletter #87

chipset limit is 8
Whats about smaller Channels?
by mistry7
Thu Jan 31, 2019 4:48 pm
Forum: Announcements
Topic: February Newsletter #87
Replies: 65
Views: 14407

Re: January Newsletter #87

- InterCell - LTE Base Stations, preorders available Can somebody update me on this... I understood LTE is cell operator's stuff. And the LTE devices Mikrotik sells are to pickup that signal and enhance it.. But you need to connect to cell op's network with cell op's simm card. Now MT has 'base sta...
by mistry7
Thu Jan 31, 2019 1:57 pm
Forum: Announcements
Topic: February Newsletter #87
Replies: 65
Views: 14407

Re: January Newsletter #87

wrong highlight, though. I would highlight the previous sentence, where it says that there are more antenna elements, so it's basically a sector design. not more interfaces.
OK, 4 port switch with POE?
by mistry7
Thu Jan 31, 2019 1:09 pm
Forum: Announcements
Topic: February Newsletter #87
Replies: 65
Views: 14407

Re: January Newsletter #87

wAP 60Gx3

Does it have 3 interface that means 3x2 Ghz Channels?
by mistry7
Thu Jan 31, 2019 10:14 am
Forum: Wireless Networking
Topic: WAP60G-AP
Replies: 13
Views: 1394

Re: WAP60G-AP

Export your config and Show us
by mistry7
Thu Jan 31, 2019 8:35 am
Forum: Wireless Networking
Topic: WAP60G-AP
Replies: 13
Views: 1394

Re: WAP60G-AP

Reset AP To Factory an begin from scratch
by mistry7
Fri Jan 25, 2019 10:27 pm
Forum: Wireless Networking
Topic: wAP 60G experience
Replies: 289
Views: 40249

Re: wAP 60G experience

I have over 20 links, works fine, if you have port flapping this is in 99% bad cable / bad POE injector
by mistry7
Fri Jan 25, 2019 8:01 am
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 547
Views: 63462

Re: LHG 60G experience

When installing the LHG60 dishes I used Ubiquiti TouchCable terminated with Ubiquiti ToughConnectors and using the Ubiquiti surge arrestors. As per instructions this requires a short cable to connect the LHG60 to the surge arrestor. Then the surge arrestor connected to the long run of toughcable an...
by mistry7
Thu Jan 24, 2019 11:57 am
Forum: General
Topic: Lite5 AC - hardware fault or manufacturing fault ??
Replies: 5
Views: 666

Re: Lite5 AC - hardware fault or manufacturing fault ??

These unit looks like it has seen much humidity, how it is mounted?
by mistry7
Thu Jan 24, 2019 11:04 am
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 579
Views: 60047

Re: ARM devices and NV2 protocol

Really? No way man, Ubnt AC 240-280Mbps on 40Mhz at 8km :P Around 130Mbps at 20MHz...
Mimosa too, but Mikrotik maxes out with 180-190 Mbit @ 40 Mhz
by mistry7
Wed Jan 23, 2019 7:56 pm
Forum: Beginner Basics
Topic: Wireless station - bridge - to lan not working [SOLVED]
Replies: 10
Views: 1578

Re: Wireless station - bridge - to lan not working [SOLVED]

hi
please send here
/interface bridge export
/ip firewall export
I'm not at home atm, at weekend i will post the configs. Thank you.
You need to use Station pseudo bridge
by mistry7
Wed Jan 23, 2019 2:08 pm
Forum: RouterBOARD hardware
Topic: InterCell
Replies: 42
Views: 4977

Re: InterCell

No benefit for us, these licensed Frequency's are impossible to use here in Germany.......
by mistry7
Wed Jan 23, 2019 8:54 am
Forum: Beginner Basics
Topic: Wireless station - bridge - to lan not working [SOLVED]
Replies: 10
Views: 1578

Re: Wireless station - bridge - to lan not working [SOLVED]

What AP is used? Mikrotik too?
Client Isolation active?
by mistry7
Wed Jan 23, 2019 8:46 am
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 579
Views: 60047

Re: ARM devices and NV2 protocol

I have the same idea,but I want to use some stationbox cc xl 19 dbi with 922 card inside.The main reason is that the 90°,120° antennas make too much noise in my tower.The question,is it correct due to the very little opening angle?. Don’t buy Plastic Antennas like Dynadish, look for RF Elements Hor...
by mistry7
Tue Jan 22, 2019 5:25 pm
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 579
Views: 60047

Re: ARM devices and NV2 protocol

My old N cpe mikrotik works faster than my new ac cpe.
Mikrotik call this feature......
by mistry7
Sun Jan 20, 2019 2:33 pm
Forum: General
Topic: My wisp network design is strange?
Replies: 2
Views: 482

Re: My wisp network design is strange?

You put every VLAN into a bridge? And then use Bridge Filter for separation?

Why keep it in L2? If you network is getting bigger broadcast will be a problem for you AP‘s
by mistry7
Wed Jan 16, 2019 3:43 pm
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 579
Views: 60047

Re: ARM devices and NV2 protocol

Modern protocols are adequate and work really well without Nv2. Nv2 is only needed if you have large legacy networks and need to add more devices to them. The simple answer is that Nv2 is an old solution to an old problem, but modern CPUs are not compatible with it and don't really need it. We need...
by mistry7
Wed Jan 16, 2019 4:10 am
Forum: General
Topic: CRS112-8P-4S-IN What can it power
Replies: 1
Views: 317

Re: CRS112-8P-4S-IN What can it power

Yes, but for 48v you need second power supply (not included)
by mistry7
Wed Jan 16, 2019 1:47 am
Forum: RouterBOARD hardware
Topic: SXTG ac with L4 licence
Replies: 13
Views: 1151

Re: SXTG ac with L4 licence

Horn is not economically profitable for some locations.

Interesting, it seems to me that after the latest updates the army works well.
No it doesn’t....
by mistry7
Wed Jan 16, 2019 12:07 am
Forum: RouterBOARD hardware
Topic: SXTG ac with L4 licence
Replies: 13
Views: 1151

Re: SXTG ac with L4 licence

If you want HQ by RF Elements 30° Horn and Use M11g with AC Module in TPA-RBC

Don’t buy ARM Hardware it is BETA Stadium, don’t work as aspected!
by mistry7
Tue Jan 15, 2019 10:58 pm
Forum: General
Topic: Large deployment suggestions for event
Replies: 13
Views: 1016

Re: Large deployment suggestions for event

Are these AP‘s Controller based?
by mistry7
Tue Jan 15, 2019 8:38 pm
Forum: General
Topic: v7 routeros
Replies: 12
Views: 3151

Re: v7 routeros

Wat Han mir weilen gelacht
by mistry7
Mon Jan 14, 2019 11:04 pm
Forum: General
Topic: Tower Cabling Choice?
Replies: 4
Views: 465

Re: Tower Cabling Choice?

How long is your cable way?
by mistry7
Mon Jan 14, 2019 10:58 pm
Forum: RouterBOARD hardware
Topic: EU and approvment of LHG 60? [SOLVED]
Replies: 8
Views: 1723

Re: EU and approvment of LHG 60? [SOLVED]

Only Lite version - LHG Lite60
Useless Device until smaller channels available
by mistry7
Mon Jan 14, 2019 9:37 pm
Forum: RouterBOARD hardware
Topic: EU and approvment of LHG 60? [SOLVED]
Replies: 8
Views: 1723

Re: EU and approvment of LHG 60? [SOLVED]

From support:

Hello,

Yes! We didn't manage to get CE for RBLHG-60ad therefore we can't sell it in Europe.

Best regards,
Martin Kengis
Only LHG-60AD or LHGG-60AD too?
by mistry7
Mon Jan 14, 2019 10:20 am
Forum: RouterBOARD hardware
Topic: Ethernet ports not working
Replies: 2
Views: 527

Re: Ethernet ports not working

Looks like you are not firewalling your router, and it gets hacked.

1. Google for Netinstall
2. Set new strong Password
3. Set Konfig new from scratch/ no backup
4. read about firewalling
by mistry7
Sun Jan 13, 2019 5:14 pm
Forum: Beginner Basics
Topic: Receiving packets on PPPoE connection and forwarding packets on Eth1
Replies: 1
Views: 245

Re: Receiving packets on PPPoE connection and forwarding packets on Eth1

Depends on hole Config and Address assignment
by mistry7
Sat Jan 12, 2019 4:46 pm
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 579
Views: 60047

Re: ARM devices and NV2 protocol

Maybe we should pay open wrt to create arm software. Mikrotik won't solve the problem
Better buy new Hardware, and throw this low cost electronics away
by mistry7
Sat Jan 12, 2019 2:07 pm
Forum: RouterBOARD hardware
Topic: RB4011 wireless performance?
Replies: 26
Views: 3681

Re: RB4011 wireless performance?

Isn't that almost same numbers as for OpenWRT?
Yes, this gets better in with the last updates, but ROS has serious problem with more than 2 chains, speed does not benefit....
by mistry7
Sat Jan 12, 2019 1:21 pm
Forum: RouterBOARD hardware
Topic: RB4011 wireless performance?
Replies: 26
Views: 3681

Re: RB4011 wireless performance?

And here Test Macbook to RB911G with ROS 6.43.8 (6.44Beta results are worse)
Macbook to RB911G ROS.png
by mistry7
Sat Jan 12, 2019 10:38 am
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 579
Views: 60047

Re: ARM devices and NV2 protocol

@Mikrotik does not solve the problem. Maybe it's time to try alternative software. Has anyone tried with other software?
For ARM Hardware there is nothing.....
https://openwrt.tetaneutral.net/release ... x/generic/
by mistry7
Fri Jan 11, 2019 9:42 pm
Forum: Wireless Networking
Topic: SXTsq in PTP link don't use chosesn frequency
Replies: 3
Views: 365

Re: SXTsq in PTP link don't use chosesn frequency

Did you use your country setting?
Did you know anything about DFS
by mistry7
Fri Jan 11, 2019 7:48 pm
Forum: RouterBOARD hardware
Topic: RB4011 wireless performance?
Replies: 26
Views: 3681

Re: RB4011 wireless performance?

Is there any throughput dropout like on the HAP ac2?
no, in my opinion this depends on the used Cihipset,

HAP ac2 has IPQ4018
RB4011 has QCA9884, s in this case WIFI Chipset is not affected....
by mistry7
Fri Jan 11, 2019 3:01 pm
Forum: RouterBOARD hardware
Topic: RB4011 wireless performance?
Replies: 26
Views: 3681

Re: RB4011 wireless performance?

Put OpenWRT on the wAP AC and with the newer Kernel and drivers you will get about 450MBit Is this something you can prove in a video or something? A post like that would blow up around here I should think. Might get some grease to the squeaky wheels. No WAP ac in Stock so i used 911G-5HPacD with O...
by mistry7
Fri Jan 11, 2019 11:50 am
Forum: Beginner Basics
Topic: receive sensitivity for metal 2
Replies: 5
Views: 432

Re: receive sensitivity for metal 2

please explain for what you need this. With signals weaker then -90 you would not be able to transport anything serious 128kbps using a mobile device would be serious? so why basebox 2 has a receive sensitivity of -100 at 1mbps while metal 52 ac has a receive of -97 if weaker than -90 is useless? T...
by mistry7
Fri Jan 11, 2019 9:59 am
Forum: Wireless Networking
Topic: CAPsMAN issue's
Replies: 9
Views: 794

Re: CAPsMAN issue's

there are some thinks in your config, what i would to in another way.

How much speed is available ?
how much clients at the same time?
by mistry7
Fri Jan 11, 2019 7:55 am
Forum: Wireless Networking
Topic: Backhaul speeds - N only / AC only or mixed mode
Replies: 3
Views: 487

Re: Backhaul speeds - N only / AC only or mixed mode

Yes. It is our infrastructure. I wasn't sure if mixed mode would slow the network if there are no legacy clients. We now have more incoming bandwidth at some of our sites, so I am refining our backhauls to make better use of the bandwidth. I am going to convert some links to Greenfield mode to see ...
by mistry7
Thu Jan 10, 2019 10:29 am
Forum: Announcements
Topic: v6.42.11 [long-term] is released!
Replies: 42
Views: 8998

Re: v6.42.11 [long-term] is released!

What are you trying to achieve here, rextended ? You have always had two choices: 1) Set Country, follow regulations, follow frequency list, output power, trust automatic settings like DFS etc. 2) Set no-country, use manual power, manual frequency, manual all things. So how come something got broke...
by mistry7
Thu Jan 10, 2019 8:58 am
Forum: Wireless Networking
Topic: Problems accessing wAP G-5HacT2HnD
Replies: 13
Views: 628

Re: Problems accessing wAP G-5HacT2HnD

I've created minimum config, bridge receives proper IP, WLAN is working, but again I cannot access the admin interface (works only via Winbox/MAC) - it is the same situation as in QuickSetup with WISP & bridge configuration. So how can I bring up admin interface on bridge / ethernet? Thank you, Bes...
by mistry7
Wed Jan 09, 2019 10:52 am
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 579
Views: 60047

Re: ARM devices and NV2 protocol

802.11ax may change things 802.11ax is useless without Software revolution, but with the delay they have had for AC, we would probably see AX in 2021, ROS 7 could be available..... Why not discuss alternative? They don’t answer anything, so I think they don’t need to sell 802.11 Hardware anymore, a...
by mistry7
Wed Jan 09, 2019 7:07 am
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 579
Views: 60047

Re: ARM devices and NV2 protocol

what are the models and how much are they?
B5 and B5c are PTP Radios

B5 has integrated Antenna and B5c is connector based

https://mimosa.co/products/specs/b5
by mistry7
Tue Jan 08, 2019 11:36 pm
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 579
Views: 60047

Re: ARM devices and NV2 protocol

we should return to mikrotik all the arm and be exchanged ... what do you think? I hate this situacion, my clients dont stop to call me... I had to change a lot of equipment We did not deploy much of them, and after our stock with Mispbe is empty we changed brandm They don’t care, why we should care?
by mistry7
Tue Jan 08, 2019 2:55 pm
Forum: RouterBOARD hardware
Topic: RB4011 wireless performance?
Replies: 26
Views: 3681

Re: RB4011 wireless performance?

Can you all list exact Intel wireless chips that were in the clients, when the test performed so poorly?
In our case this one
https://gzhls.at/blob/ldb/5/6/6/a/3594c ... 3ecafb.pdf

Only 54 MBit @ ac
by mistry7
Mon Jan 07, 2019 11:32 pm
Forum: General
Topic: Linux kernel 4.x - when?
Replies: 8
Views: 2084

Re: Linux kernel 4.x - when?

A little birdie whispered into my ear that March is a welcoming month full of surprises. :-)

Indeed. Unlike previous years solar equinox is going to happen around 21st marking start of Fall on southern hemisphere. :mrgreen:
He is talking about MUM Europe
by mistry7
Mon Jan 07, 2019 7:37 pm
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 579
Views: 60047

Re: ARM devices and NV2 protocol

What I meant to say was - for other competitors to deliver higher speeds (exclude full duplex) are they using 80-160Mhz bandwidth per AP channel ?
No they don’t use MT for Wireless
by mistry7
Mon Jan 07, 2019 4:29 pm
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 579
Views: 60047

Re: ARM devices and NV2 protocol

We have a lot of Mikrotik CPE out there, but in last 6 month we realized how competitors are able to deliver higher speeds, Mikrotik is outdated, I don’t believe that we came back to Mikrotik
Deliver higher speed using how much bandwidth (80-160MHz?)
No, try 280MBIt TCP with Mikrotik @40mhz
by mistry7
Mon Jan 07, 2019 3:38 pm
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 579
Views: 60047

Re: ARM devices and NV2 protocol

New firmware, same problem :(
Wait for Christmas.....
by mistry7
Mon Jan 07, 2019 11:15 am
Forum: Wireless Networking
Topic: 2. PTP Network problem.
Replies: 6
Views: 480

Re: 2. PTP Network problem.

Excuse me.
ap1s bridge
ap1c station bridge
ap2s bridge
ap2c station pseudobridge
For all Mikrotik don’t use pseudobridge
by mistry7
Sun Jan 06, 2019 11:54 pm
Forum: General
Topic: What are these unknown PCI resource on RB4011?
Replies: 4
Views: 413

Re: What are these unknown PCI resource on RB4011?

That’s the Wireless speed, unsupported at this moment
by mistry7
Sun Jan 06, 2019 11:46 pm
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 579
Views: 60047

Re: ARM devices and NV2 protocol

I Hope arm solution every day...
We have a lot of Mikrotik CPE out there, but in last 6 month we realized how competitors are able to deliver higher speeds, Mikrotik is outdated, I don’t believe that we came back to Mikrotik
by mistry7
Sun Jan 06, 2019 10:28 pm
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 579
Views: 60047

Re: ARM devices and NV2 protocol

it's an hardware bug and it can't be resolved possible, we cannot control it, no other vendor in WISP business has ARM and TDMA..... BUT IF IT HARDWARE, WHY THEY DON´T SELL THE OLD STUFF...... Cambium have ARM epmp-force-300-25 They must disable 3 cores & use only ONE CORE at this moment but works ...
by mistry7
Sun Jan 06, 2019 11:29 am
Forum: Wireless Networking
Topic: 2. PTP Network problem.
Replies: 6
Views: 480

Re: 2. PTP Network problem.

modem is dhcp server. ap devices are static ip. another pc and phones are using dhcp. ap1s ptp bridge ap ap1c ptp bridge cpe ap2s ptp bridge ap ap2c ptp bridge cpe ap1s mikrotik ap1c mikrotik ap2s mikrotik ap2c mikrotik We want to now, what you have selected in wireless tab, like - AP Bridge - Brid...
by mistry7
Sun Jan 06, 2019 11:15 am
Forum: Wireless Networking
Topic: 60GHz proximity and colocation
Replies: 13
Views: 1080

Re: 60GHz proximity and colocation

As @mistry7 wrote: the biggest problem about antennae co-location is interference from other antennae on same location. Due to low-cost design of Rx part of devices there's not much to be done in settings. The only thing that helps is to have as much RF separation between antennae as possible. If a...
by mistry7
Sun Jan 06, 2019 12:11 am
Forum: RouterBOARD hardware
Topic: RB4011 wireless performance?
Replies: 26
Views: 3681

Re: RB4011 wireless performance?

Put OpenWRT on the wAP AC and with the newer Kernel and drivers you will get about 450MBit Is this something you can prove in a video or something? A post like that would blow up around here I should think. Might get some grease to the squeaky wheels. My Internet connection is not fast enough to ma...
by mistry7
Sat Jan 05, 2019 10:11 pm
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 579
Views: 60047

Re: ARM devices and NV2 protocol

it's an hardware bug and it can't be resolved
possible, we cannot control it, no other vendor in WISP business has ARM and TDMA.....
BUT IF IT HARDWARE, WHY THEY DON´T SELL THE OLD STUFF......
by mistry7
Sat Jan 05, 2019 9:48 pm
Forum: RouterBOARD hardware
Topic: RB4011 wireless performance?
Replies: 26
Views: 3681

Re: RB4011 wireless performance?

My Indoor units have improved to about 45% of what they CLAIM as throughput. When i first got the cAP AC and hAP AC2 on the bench I was getting around 10% of the proposed 866M of transfer rates. A bunch of RouterOS Updates and several months later, I am in the low 300s. The wAP AC despite being 3x3...
by mistry7
Sat Jan 05, 2019 5:06 pm
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 579
Views: 60047

Re: ARM devices and NV2 protocol

From support:

Hello,

Apologies for the inconvenience, this issue is being investigated by our development team and should be fixed in the upcoming releases of the RouterOS.

Best regards,
i´ve got this mail in march 18 some days before mum Berlin..... and until now nothing
by mistry7
Sat Jan 05, 2019 3:34 pm
Forum: RouterBOARD hardware
Topic: RB4011 wireless performance?
Replies: 26
Views: 3681

Re: RB4011 wireless performance?

At this moment bad, we tested 3 Intel Based AC Laptops and both are only able to connect to 54 MBit..... Kind of seems "par" for Mikrotik with wireless devices. They release them and it takes several months and routerOS/firmwares before they start showing acceptable results. I went through that wit...
by mistry7
Sat Jan 05, 2019 6:44 am
Forum: RouterBOARD hardware
Topic: RB4011 wireless performance?
Replies: 26
Views: 3681

Re: RB4011 wireless performance?

At this moment bad, we tested 3 Intel Based AC Laptops and both are only able to connect to 54 MBit.....
by mistry7
Sat Jan 05, 2019 1:56 am
Forum: Wireless Networking
Topic: 60GHz proximity and colocation
Replies: 13
Views: 1080

Re: 60GHz proximity and colocation

If you are able to do a metal shield on the back of the dish, you would not see any
Interfering
by mistry7
Thu Jan 03, 2019 1:34 pm
Forum: General
Topic: Hacked Board
Replies: 15
Views: 1551

Re: Hacked Board

The rules are the same that were added by the old hack/exploit script. So 99.99% chance that these rules you had even before upgrade, and they kept sending the attacker your passwords, old and new, even after upgrade. upgrading patches the vulnerability, it doesn't modify your config. if you had su...
by mistry7
Thu Jan 03, 2019 10:58 am
Forum: General
Topic: Hacked Board
Replies: 15
Views: 1551

Re: Hacked Board

mistry7 - Are you 100% sure that you changed all the passwords on your router for all the users configured on it? Are you 100% sure that passwords were changed after an upgrade to v6.43 not before that? One user only on all boards, yes in PW list change is Dokumented with date, and there are 3 upda...
by mistry7
Thu Jan 03, 2019 4:47 am
Forum: Beginner Basics
Topic: receive sensitivity for metal 2
Replies: 5
Views: 432

Re: receive sensitivity for metal 2

please explain for what you need this.
With signals weaker then -90 you would not be able to transport anything serious
by mistry7
Thu Jan 03, 2019 2:06 am
Forum: General
Topic: Hacked Board
Replies: 15
Views: 1551

Re: Hacked Board

Changing passwords is not enough, you MUST netinstall any compromised device! This is first and only board I found. We did update on all core routers in the same night the updates was available in the early morning all CPEs We checked all login protocols (2weeks back) there was no login to our bord...
by mistry7
Thu Jan 03, 2019 1:57 am
Forum: General
Topic: Should MikroTik make more powerful antennas and wireless protocols in 2019?
Replies: 19
Views: 1521

Re: Should MikroTik make more powerful antennas and wireless protocols in 2019?

You know that we will not see new kernel on current RBs? Update actual RBs or make new ones with new kernel, better hardware and so on, what's the best choice for MK that is selling their products? Come on, it's not so different than smartphones. It is different no one buys Andoid 2.3 phones today....
by mistry7
Wed Jan 02, 2019 7:55 pm
Forum: General
Topic: Hacked Board
Replies: 15
Views: 1551

Re: Hacked Board

But if it's 6.43.x how can it be exploited as to my knowledge there are no open security bugs? There was at least one open security bug (fixed in 6.43.8) that could be used when the password was known. The password may have leaked earlier or using another mechanism. Impossible, after Winbox hack, w...
by mistry7
Wed Jan 02, 2019 6:31 pm
Forum: General
Topic: Hacked Board
Replies: 15
Views: 1551

Re: Hacked Board

single router on single VDSL Connection, no other Mikrotik devices....
IP Filter for services is enabled since installation.....(2017)
by mistry7
Wed Jan 02, 2019 3:48 pm
Forum: General
Topic: Hacked Board
Replies: 15
Views: 1551

Hacked Board

Hi, i found an hacked board running was on 6.43.2 I´dont now how this had worked, we use Firewall and winbox only responded to known IP (our IP´s) All Services Ports are changed ssh=62000 www-ssl=65002 api=64000 winbox=65000 api-all=63000 the wired think is, i have full rights but it is not possible...
by mistry7
Tue Jan 01, 2019 5:35 pm
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 579
Views: 60047

Re: ARM devices and NV2 protocol

Easy, very easy don´t buy unfixed product. Buy mipsbe thats works fine
There are no mispbe ac CPE‘s available they are all legacy
A serious manufacturer had stopped ARM Hardware with issues and delivers the old working hardware to coustomers
by mistry7
Tue Jan 01, 2019 4:37 pm
Forum: Wireless Networking
Topic: Cap AC, Hap AC2 or UniFi?
Replies: 38
Views: 10318

Re: Cap AC, Hap AC2 or UniFi?

Yes it is true, Mikrotik is far away from good speeds on there Wireless Systems @2,4Ghz and 5 GHz, they need to think about that, but they don’t care...
by mistry7
Mon Dec 31, 2018 1:30 pm
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 579
Views: 60047

Re: ARM devices and NV2 protocol

Maybe with new drivers in V7 but the main question is when V7 'll be released?
Maybe in 2019, but they don’t care, so we don’t care too, we has to grow, and did exchange on some Places with great success, we don’t need Mikrotik anymore....
by mistry7
Mon Dec 31, 2018 9:52 am
Forum: Wireless Networking
Topic: RB922UAGS-5HPacD slow speed [SOLVED]
Replies: 13
Views: 1285

Re: RB922UAGS-5HPacD slow speed [SOLVED]

What client devices you are using?
Sxt Lite5 ac?
Yes, and I used NV2
Do you deliver voice / sip service ?
If not try 802.11, for higher speeds
by mistry7
Sun Dec 30, 2018 10:54 pm
Forum: RouterBOARD hardware
Topic: QRT 2 4 KM ¿HOW MEGAS?
Replies: 4
Views: 442

Re: QRT 2 4 KM ¿HOW MEGAS?

I want to instal ptp qrt about 4 km and i need aprox how megas i can pass.

Thank you
depends on EIRP you are able to go
Only EIRP qrt 2
What is allowed? 20dbm?
by mistry7
Sun Dec 30, 2018 10:53 pm
Forum: Wireless Networking
Topic: RB922UAGS-5HPacD slow speed [SOLVED]
Replies: 13
Views: 1285

Re: RB922UAGS-5HPacD slow speed [SOLVED]

What client devices you are using?
Sxt Lite5 ac?
by mistry7
Sun Dec 30, 2018 1:25 pm
Forum: Wireless Networking
Topic: What about WPA3
Replies: 3
Views: 886

Re: What about WPA3

Thanks Mistry7 This will be investing, but is not yet for now. Many devices still do not support that One Device with WPA3... https://wikidevi.com/wiki/Synology_RT2600ac There are much IPQ devices from MT...... But Mikrotik is 5 years behind with ROS.... So it will take a long time... we will see R...
by mistry7
Sun Dec 30, 2018 1:19 pm
Forum: RouterBOARD hardware
Topic: QRT 2 4 KM ¿HOW MEGAS?
Replies: 4
Views: 442

Re: QRT 2 4 KM ¿HOW MEGAS?

I want to instal ptp qrt about 4 km and i need aprox how megas i can pass.

Thank you
depends on EIRP you are able to go
by mistry7
Sun Dec 30, 2018 1:18 pm
Forum: Wireless Networking
Topic: RB922UAGS-5HPacD slow speed [SOLVED]
Replies: 13
Views: 1285

Re: RB922UAGS-5HPacD slow speed [SOLVED]

Hello this is my wireless registration

Image
looks not bad at all, but it client how has 86 Mbit limits all other if he es transfer data.......
just add ccq (click right on the arrow (down) and select ccq)
by mistry7
Sun Dec 30, 2018 1:14 pm
Forum: General
Topic: Has this remote ROOT exploit been patched??
Replies: 22
Views: 1794

Re: Has this remote ROOT exploit been patched??

Show us your firewall configuration I have no firewall configuration and I do not know how to configure it. As I stated from the beginning, I am not a router OS guy. It is as it was from the default settings. There are no "filter rules" listed. Not understanding I have been hesitant to add rules fo...
by mistry7
Sun Dec 30, 2018 11:30 am
Forum: Wireless Networking
Topic: What about WPA3
Replies: 3
Views: 886

Re: What about WPA3

All ac hardware should be useable,
But not with ROS 6 based on Linux Kernel 3.3.5 (2013)
by mistry7
Sun Dec 30, 2018 11:28 am
Forum: Wireless Networking
Topic: How to increase wireless speed of hAP ac²?
Replies: 8
Views: 883

Re: How to increase wireless speed of hAP ac²?

Just make some test with large file transfer. Laptop is Lenovo X220 with Intel Centrino Advanced N-6205 300Mbps adapter and another PC is connected with Ethernet cable. Channel width is 40MHz and adapter is rated 300Mpbs/300Mbps, no other station on 5GHz near me. The speed vary between 185Mbps and ...
by mistry7
Sun Dec 30, 2018 11:26 am
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 547
Views: 63462

Re: LHG 60G experience

I see everybody suggesting a specific 3rd party precision alignment mount but nobody suggested the Mikrotik solidMount https://mikrotik.com/product/solidmount It does look proper for the job and it is actually half price from the 3rd party one. Has anybody got any experience with it? Is it any good...
by mistry7
Sun Dec 30, 2018 10:25 am
Forum: General
Topic: Has this remote ROOT exploit been patched??
Replies: 22
Views: 1794

Re: Has this remote ROOT exploit been patched??

Show us your firewall configuration
by mistry7
Sun Dec 30, 2018 10:05 am
Forum: Wireless Networking
Topic: How to increase wireless speed of hAP ac²?
Replies: 8
Views: 883

Re: How to increase wireless speed of hAP ac²?

Does you computer connect on 2,4 GHz Interface or on 5 GHz?

802.11ac on 5Ghz


Show us your wireless registration tab

How?
Make a screen shot
by mistry7
Sun Dec 30, 2018 8:24 am
Forum: Wireless Networking
Topic: How to increase wireless speed of hAP ac²?
Replies: 8
Views: 883

Re: How to increase wireless speed of hAP ac²?

I've just received hAP ac². Turned it on and use the 'default' settings (what came out of the box). When I connect my two computers using wires I get 800 Mb/s (I’m OK with this). When I connect one computer wirelessly (802.11ac on 5Ghz) the other is connected through cable , I get 50 Mb/s. The wire...
by mistry7
Sun Dec 30, 2018 8:21 am
Forum: Wireless Networking
Topic: RB922UAGS-5HPacD slow speed [SOLVED]
Replies: 13
Views: 1285

Re: RB922UAGS-5HPacD slow speed [SOLVED]

Show us your wireless registered tab
I need to see how your clients are connecting
by mistry7
Sat Dec 29, 2018 4:19 am
Forum: General
Topic: dnat on ouput chain
Replies: 4
Views: 395

Re: dnat on ouput chain

I agree with you, can't be done. Another option: do port forwarding on the target system You can’t do this for Ros, but for your clients add action=redirect chain=dstnat comment="DNS redirection to local cache" dst-address=\ !192.168.88.1 dst-port=53 in-interface=bridge1 protocol=udp to-ports=53 Ch...
by mistry7
Fri Dec 28, 2018 11:40 am
Forum: The User Manager
Topic: user manager database is corrupted everyday
Replies: 4
Views: 728

Re: user manager database is corrupted everyday

How do you restore the database every time?
Looks like there is an error in your backup.


Do Export in file in Terminal on Running System, reset and Build new one... restore by script
by mistry7
Fri Dec 28, 2018 9:53 am
Forum: Wireless Networking
Topic: P2P Upgrade Question
Replies: 9
Views: 537

Re: P2P Upgrade Question

I agree about the previous person 😁 So are you saying I should reduce the power of the radios if their 10-15db to hot? There on default power settings at the minute but this can be changed I assumed? Thanks With 15db reduce you are near the point the link begins dropping because of to low signal
by mistry7
Fri Dec 28, 2018 9:45 am
Forum: Wireless Networking
Topic: P2P Upgrade Question
Replies: 9
Views: 537

Re: P2P Upgrade Question

Maximum permitted radiated power: 100mW/MHz eirp ( to a maximum of 2W eirp ) Ok.... Antenna a = 33dbm Path loss 5780, 5.5km = -127,5 dB Antenna b gain = 17 dBi your Target with Receiver power should be -77 you Are about 10-15db to hot. Looks like the person before not take care of law, this link wa...
by mistry7
Fri Dec 28, 2018 9:08 am
Forum: Wireless Networking
Topic: SXTsq Lite60
Replies: 9
Views: 1350

Re: SXTsq Lite60

Can I make point to point link with 2pcs sxtsq lite60? I need it for 300 meters distance
Possible but I will drop on every rain
by mistry7
Fri Dec 28, 2018 1:14 am
Forum: Wireless Networking
Topic: P2P Upgrade Question
Replies: 9
Views: 537

Re: P2P Upgrade Question

The link is in Ireland, in a rural location with just trees and landscape between the radios.
One location is in a business park where there is a mask hosting various other radios for ISP's and mobile phones etc...
Howmuch EIRP is allowed?
Looks like it is running on full power
by mistry7
Fri Dec 28, 2018 1:01 am
Forum: Wireless Networking
Topic: wpa3
Replies: 5
Views: 1305

Re: wpa3

Just FYI... "Synology is the first manufacturer to produce WPA3 certified router, MR2200ac, WPA3-Personal, WPA3-Enterprise and Opportunistic Wireless Encryption (OWE), officially announced in October of 2018." https://www.modders-inc.com/synology-mr2200ac-mesh-router-review-first-wpa3-certified-wi-...
by mistry7
Fri Dec 28, 2018 12:39 am
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 579
Views: 60047

Re: ARM devices and NV2 protocol

No Mistry mikrotik loss a lot of clients...
Not enough, otherwise it would be fixed long time ago
by mistry7
Thu Dec 27, 2018 11:40 pm
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 579
Views: 60047

Re: ARM devices and NV2 protocol

Why don't request @mikrotik? I am sure ypu read this post....
They don’t need to answer , people’s buying this beta shit every day.....
by mistry7
Thu Dec 27, 2018 11:36 pm
Forum: Wireless Networking
Topic: P2P Upgrade Question
Replies: 9
Views: 537

Re: P2P Upgrade Question

The dishes are the best option for shielding.... With the board M11g you Are probably upgradable to Wave 2 (newAC) or 802.11ax without changing something more then the PCIe card. With Dynadish or QRTac you will not see much more throughput , both devices are plastic and Have no shielding.... I would...
by mistry7
Thu Dec 27, 2018 9:44 pm
Forum: Wireless Networking
Topic: P2P Upgrade Question
Replies: 9
Views: 537

Re: P2P Upgrade Question

No, all ARM Based Mikrotik had issue with Nv2 And they don’t Performe well. In your case i would go with RF Elements TP-550 Dish, TPA-RBC Adapter , M11G, R11e-5HacD With about 10dBi Better Antenna and quite good shielding you would archive much more speed (your ccq now is bad) If the speed you get w...
by mistry7
Thu Dec 27, 2018 5:58 am
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 579
Views: 60047

Re: ARM devices and NV2 protocol

It is Christmas day... No arm fix no Ros 7. Please @Mikrotik... One more time said us if they have plain solve the problem and when. Wisp need solutions no problem. Change hardware is Too espensive and waste of time... Its Too dificult for us this situation and more dificult our silence... Build ne...
by mistry7
Wed Dec 26, 2018 9:31 pm
Forum: RouterBOARD hardware
Topic: Connect hap ac lite to poe+ switch
Replies: 9
Views: 795

Re: Connect hap ac lite to poe+ switch

I am powering a hAP AC from a Cisco SG250 (SG250-08HP). Works like a charm, although it should not work by the datasheet.
Hap ac is active POe capable HAP ac Lite is not
by mistry7
Wed Dec 26, 2018 2:09 pm
Forum: RouterBOARD hardware
Topic: Connect hap ac lite to poe+ switch
Replies: 9
Views: 795

Re: Connect hap ac lite to poe+ switch

Ah,
that's a nice idea i will give it a try!
Thanks!

GSW-1600HP is the switch i prepared with this setup.
Still, you can buy adapters or you buy a UBNT PoE switch which supports passive PoE as a port option.
Mikrotik has equal switch.
https://mikrotik.com/product/crs328_24p_4s_rm
by mistry7
Wed Dec 26, 2018 2:07 pm
Forum: Wireless Networking
Topic: Best hardware for large 2.4GHz AP
Replies: 8
Views: 549

Re: Best hardware for large 2.4GHz AP

How much speed you need for the client devices?
by mistry7
Wed Dec 26, 2018 1:55 pm
Forum: Wireless Networking
Topic: Radar detected on XXX
Replies: 31
Views: 3330

Re: Radar detected on XXX

On DFS Channels you have to deal with this
You choose a frequency and when the AP detect radar on this one, the AP select new channel
by mistry7
Tue Dec 25, 2018 12:17 pm
Forum: General
Topic: failure: dns server failure
Replies: 4
Views: 1131

Re: failure: dns server failure

Without complete config no help is possible
by mistry7
Tue Dec 25, 2018 12:02 pm
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 579
Views: 60047

Re: ARM devices and NV2 protocol

It is Christmas day... No arm fix no Ros 7. Please @Mikrotik... One more time said us if they have plain solve the problem and when. Wisp need solutions no problem. Change hardware is Too espensive and waste of time... Its Too dificult for us this situation and more dificult our silence... Build ne...
by mistry7
Tue Dec 25, 2018 10:58 am
Forum: RouterBOARD hardware
Topic: VDSL2
Replies: 5
Views: 832

Re: VDSL2

by mistry7
Tue Dec 25, 2018 9:22 am
Forum: RouterBOARD hardware
Topic: Best router board to use LoadBalancing over link up to 900Mbps
Replies: 2
Views: 467

Re: Best router board to use LoadBalancing over link up to 900Mbps

People here sayed that RB4011 per core performance is better then all CCR, I have one but I hadn’t time to check it by my own
by mistry7
Tue Dec 25, 2018 12:28 am
Forum: Scripting
Topic: Include vars in path
Replies: 2
Views: 341

Re: Include vars in path

Please show your variable declaration too
by mistry7
Mon Dec 24, 2018 11:02 pm
Forum: General
Topic: Should MikroTik make more powerful antennas and wireless protocols in 2019?
Replies: 19
Views: 1521

Re: Should MikroTik make more powerful antennas and wireless protocols in 2019?

We have complete another experience with mt/ubnt and Mimosa Electronics , RF Elements Sector Performance really well, we use 30°/40° ones and uses smaller channels with really good speeds CCQ‘s over 98% on all clients.... 300MBIt real TCP over 40Mhz with Mimosa M11g with AC Modul ist multicore to We...
by mistry7
Mon Dec 24, 2018 10:03 pm
Forum: General
Topic: Should MikroTik make more powerful antennas and wireless protocols in 2019?
Replies: 19
Views: 1521

Re: Should MikroTik make more powerful antennas and wireless protocols in 2019?

Guys, please... If 6.44 would be renamed to version 7.0, it won't solve all the problems. First we need new hardware, a Net Metal costs 150$ or something near that? That's the top of MK antennas, if you look to other vendors you can buy the equivalent of a Disc Lite with only 150$. There isn't so m...
by mistry7
Mon Dec 24, 2018 9:02 am
Forum: General
Topic: Should MikroTik make more powerful antennas and wireless protocols in 2019?
Replies: 19
Views: 1521

Re: Should MikroTik make more powerful antennas and wireless protocols in 2019?

Guys, please... If 6.44 would be renamed to version 7.0, it won't solve all the problems. First we need new hardware, a Net Metal costs 150$ or something near that? That's the top of MK antennas, if you look to other vendors you can buy the equivalent of a Disc Lite with only 150$. There isn't so m...
by mistry7
Mon Dec 24, 2018 8:57 am
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 547
Views: 63462

Re: LHG 60G experience

66000 GHz is working on 4000+. Tested in real life...
Shure it will work, but it drop every rain
by mistry7
Mon Dec 24, 2018 12:11 am
Forum: Wireless Networking
Topic: Can I connect SXTsq to my home WIFI [SOLVED]
Replies: 8
Views: 545

Re: Can I connect SXTsq to my home WIFI [SOLVED]

In the Security Profile
by mistry7
Mon Dec 24, 2018 12:03 am
Forum: General
Topic: Should MikroTik make more powerful antennas and wireless protocols in 2019?
Replies: 19
Views: 1521

Re: Should MikroTik make more powerful antennas and wireless protocols in 2019?

Without ROS7, NO!!! Sent from my C6833 using Tapatalk 100% and we need current wireless drivers, not this basic home improvement software, With 4 years delay to competitors. - all competitors have Spectral Scan - all competitors have better performances with TDMA - No Roaming features - No band ste...
by mistry7
Sun Dec 23, 2018 4:17 pm
Forum: RouterBOARD hardware
Topic: VDSL2
Replies: 5
Views: 832

Re: VDSL2

There is a sfp avaible for VDSL
Where you are from?
by mistry7
Sun Dec 23, 2018 4:16 pm
Forum: Wireless Networking
Topic: Devices not getting full 802.11ac speed on cAP ac
Replies: 1
Views: 537

Re: Devices not getting full 802.11ac speed on cAP ac

1. try to use n/ac instead of a/n/ac
2. use local forwarding
by mistry7
Sat Dec 22, 2018 5:56 pm
Forum: Wireless Networking
Topic: Can I connect SXTsq to my home WIFI [SOLVED]
Replies: 8
Views: 545

Re: Can I connect SXTsq to my home WIFI [SOLVED]

Is your Home WiFi Mikrotik based too? No it is cisco based i think it is possible with https://wiki.mikrotik.com/wiki/Manual:Wireless_Station_Modes#Mode_station-pseudobridge Do you think a normal bridge would work? And is security profiles the place to enter the WiFi's ssid? Bridge and Station Brid...
by mistry7
Sat Dec 22, 2018 4:05 pm
Forum: Wireless Networking
Topic: Can I connect SXTsq to my home WIFI [SOLVED]
Replies: 8
Views: 545

Re: Can I connect SXTsq to my home WIFI [SOLVED]

Is your Home WiFi Mikrotik based too?
No it is cisco based
i think it is possible with https://wiki.mikrotik.com/wiki/Manual:W ... eudobridge
by mistry7
Sat Dec 22, 2018 10:19 am
Forum: Announcements
Topic: v6.43.8 [stable] is released!
Replies: 169
Views: 33650

Re: v6.43.8 [stable] is released!

i'm wondering what's differences between new "installation" and distance?
actually what the new feature does?

Thanks
me too :)
distance is for ACK calculation and installation ist foot frequency selection.....
by mistry7
Sat Dec 22, 2018 6:32 am
Forum: RouterBOARD hardware
Topic: RB4011iGS+RM no switch settings?
Replies: 38
Views: 6386

Re: RB4011iGS+RM no switch settings?

*) winbox - show "Switch" menu on RB4011iGS+5HacQ2HnD and RB4011iGS+;

Added in 6.43.8
by mistry7
Sat Dec 22, 2018 6:27 am
Forum: Wireless Networking
Topic: Can I connect SXTsq to my home WIFI [SOLVED]
Replies: 8
Views: 545

Re: Can I connect SXTsq to my home WIFI [SOLVED]

Is your Home WiFi Mikrotik based too?
by mistry7
Sat Dec 22, 2018 6:24 am
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 579
Views: 60047

Re: ARM devices and NV2 protocol

There is no comment from Mikrotik so you have to life with that „features“ I do not want to live with that, I will return it to my supplier for warranty :o :o :o :o 8) That is what we have done..... We build new Tower not with Mikrotik, there is no Business Case, 12 Month and no solution!
by mistry7
Fri Dec 21, 2018 11:56 pm
Forum: Wireless Networking
Topic: 6.43.8 UPDATE ALERT READ BEFORE UPDATE
Replies: 5
Views: 957

Re: 6.43.8 UPDATE ALERT READ BEFORE UPDATE

Christmas surprise ;)
....
In my dreams MT sell wireless division to another company ....CAMBIUM :) . Don't troll more please.
Good idea, they don’t have any innovation @5Ghz Outdoor Wireless in the last 4 years....
by mistry7
Fri Dec 21, 2018 9:07 pm
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 579
Views: 60047

Re: ARM devices and NV2 protocol

There is no comment from Mikrotik so you have to life with that „features“
by mistry7
Fri Dec 21, 2018 9:04 pm
Forum: RouterBOARD hardware
Topic: RB4011iGS+5HacQ2HnD-IN
Replies: 4
Views: 865

Re: RB4011iGS+5HacQ2HnD-IN

Try to google Winbox
by mistry7
Fri Dec 21, 2018 7:52 am
Forum: General
Topic: IPv6 Ping does not work with domain names
Replies: 42
Views: 23737

Re: IPv6 Ping does not work with domain names

RouterOS 6.43.7 on all devices. I have exactly the same problem with Mikrotik unable to resolve AAAA records from a hostname. My test Mikrotik LtAP device gets CGNAT protected private IPv4 address of 100.64.0.0/18 from the mobile operator. There is no inbound access to that. The same Mikrotik LtAP ...
by mistry7
Thu Dec 20, 2018 2:30 pm
Forum: Wireless Networking
Topic: Nv2 Sync Mode Not working
Replies: 6
Views: 1324

Re: Nv2 Sync Mode Not working

The Nv2 protocol already has a problem in general. but no one makes any statement about these issues. Will we have to try different brands?
Best way is to try different vendor if you need tdma
by mistry7
Thu Dec 20, 2018 2:29 pm
Forum: RouterBOARD hardware
Topic: Powering 3x hAP ac via POE
Replies: 1
Views: 334

Re: Powering 3x hAP ac via POE

What do you think is the Poe ind the hex Poe for, shure that works
by mistry7
Thu Dec 20, 2018 12:56 am
Forum: RouterBOARD hardware
Topic: mUPS suggestions
Replies: 1
Views: 325

Re: mUPS suggestions

Seasons greeting Mikrotik. If you're going to do a mUPS hardware refresh at some point in the future, can you consider a low voltage disconnect feature? At the moment we add an in-line one with the battery(s) but it would be a much nicer product if one were included. As it can already detect when t...
by mistry7
Wed Dec 19, 2018 11:08 pm
Forum: Announcements
Topic: MikroTik News December 2018 (Issue #86)
Replies: 25
Views: 8776

Re: MikroTik News December 2018 (Issue #86)

The PWR AP is an interesting product, but I would love to see it in 5GHz instead of 2.4GHz. We are slowly starting to ditch 2.4 APs in every solution. How to you limit the area of coverage of this product? If it is transmitting through power lines, what stops it to go to the neighbor apartment? Thi...
by mistry7
Wed Dec 19, 2018 10:52 pm
Forum: Beginner Basics
Topic: RB4011 usermanager login page error 404 [SOLVED]
Replies: 2
Views: 423

Re: RB4011 usermanager login page error 404 [SOLVED]

Did youngish the right platform file?? This device is ARM Based
by mistry7
Wed Dec 19, 2018 10:10 pm
Forum: Wireless Networking
Topic: RBLHGG-60ad
Replies: 1
Views: 334

Re: RBLHGG-60ad

I have a couple of links in 350-550m and I didn’t see any drop there since they are in production
We are waiting for snow....
by mistry7
Wed Dec 19, 2018 2:34 pm
Forum: Wireless Networking
Topic: Nv2 Sync Mode Not working
Replies: 6
Views: 1324

Re: Nv2 Sync Mode Not working

This feature has never left Beta state
by mistry7
Wed Dec 19, 2018 2:32 pm
Forum: Announcements
Topic: v6.44beta [testing] is released!
Replies: 365
Views: 83724

Re: v6.44beta [testing] is released!

Honzam This frequency is not legal in our country. And this problem is due to simple upgrade RouterOS :(:( We use official sources for frequencies allowed in each country. Are you sure you are correct on this one? We use information from Qualcomm chip and European Union. Does not respect outdoor / ...
by mistry7
Wed Dec 19, 2018 2:29 pm
Forum: General
Topic: Omnitik 5 retired from Spain
Replies: 8
Views: 1026

Re: Omnitik 5 retired from Spain

I received a similar letter from the german regulatory authority (BNetzA), which says that the SXT-ac must not be sold, handed over or imported. The german letter referred to findings of the above mentioned spanish authority. I sent this german letter to MikroTik several weeks ago, but a statement ...
by mistry7
Wed Dec 19, 2018 2:27 pm
Forum: Wireless Networking
Topic: radar detected problems
Replies: 47
Views: 18039

Re: radar detected problems

How does RouterOS handle DFS radar detections? Is there something like "zero wait DFS" (https://avm.de/fritz-labor/fritz-labor-fuer-fritzbox-6590-cable/neues-verbesserungen/zero-wait-dfs/)? RouterOS could do continuous background scanning to find "available" and "unavailable" channels (https://www....
by mistry7
Wed Dec 19, 2018 12:38 pm
Forum: General
Topic: Feature request: CAPsManager - roaming
Replies: 79
Views: 23162

Re: Feature request: CAPsManager - roaming

The project requirements for WiFi4EU are: (..) support IEEE 802.11r (..) But unfortunately Microtik does not meet the requirements. We also wanted to participate in this project to extend our infrastructure. It seems, EU money will go to another company. Perhaps Mikrotik don't need this money? For ...
by mistry7
Wed Dec 19, 2018 12:32 pm
Forum: Announcements
Topic: v6.44beta [testing] is released!
Replies: 365
Views: 83724

Re: v6.44beta [testing] is released!

Which ETSI you are comply with? Because as I know there is a band between 5470MHz to 5725Mhz, this leting me select this variety of frequencies, but if YOU apply on your restrictions, I cannot use 5480MHz, why?
+1
by mistry7
Wed Dec 19, 2018 11:13 am
Forum: Announcements
Topic: v6.44beta [testing] is released!
Replies: 365
Views: 83724

Re: v6.44beta [testing] is released!

Honzam This frequency is not legal in our country. And this problem is due to simple upgrade RouterOS :(:( We use official sources for frequencies allowed in each country. Are you sure you are correct on this one? We use information from Qualcomm chip and European Union. Then we need Option to set ...
by mistry7
Wed Dec 19, 2018 1:18 am
Forum: General
Topic: AirFiber/Mikrotik issue
Replies: 1
Views: 222

Re: AirFiber/Mikrotik issue

Show logs or config
Do you know what Happens ??
Looks like Portflapping
by mistry7
Mon Dec 17, 2018 12:29 am
Forum: Wireless Networking
Topic: wAP ac is slow with manager forwarding and high CPU
Replies: 9
Views: 1072

Re: wAP ac is slow with manager forwarding and high CPU

With Local forwarding and Fastpath active on bridge?
Only Hardware queue on WiFi Interfaces?
by mistry7
Mon Dec 17, 2018 12:26 am
Forum: General
Topic: EoIP + DHCP Issue [SOLVED]
Replies: 9
Views: 976

Re: EoIP + DHCP Issue [SOLVED]

Look for L2tp and BCP instead of EOIP
Your goals:
- No MTU Issue
- pptp is unsave

https://wiki.mikrotik.com/wiki/Manual:B ... _bridging)