Community discussions

Search found 1223 matches

by mistry7
Fri Jan 11, 2019 3:01 pm
Forum: RouterBOARD hardware
Topic: RB4011 wireless performance?
Replies: 26
Views: 3024

Re: RB4011 wireless performance?

Put OpenWRT on the wAP AC and with the newer Kernel and drivers you will get about 450MBit Is this something you can prove in a video or something? A post like that would blow up around here I should think. Might get some grease to the squeaky wheels. No WAP ac in Stock so i used 911G-5HPacD with O...
by mistry7
Fri Jan 11, 2019 11:50 am
Forum: Beginner Basics
Topic: receive sensitivity for metal 2
Replies: 5
Views: 379

Re: receive sensitivity for metal 2

please explain for what you need this. With signals weaker then -90 you would not be able to transport anything serious 128kbps using a mobile device would be serious? so why basebox 2 has a receive sensitivity of -100 at 1mbps while metal 52 ac has a receive of -97 if weaker than -90 is useless? T...
by mistry7
Fri Jan 11, 2019 9:59 am
Forum: Wireless Networking
Topic: CAPsMAN issue's
Replies: 9
Views: 701

Re: CAPsMAN issue's

there are some thinks in your config, what i would to in another way.

How much speed is available ?
how much clients at the same time?
by mistry7
Fri Jan 11, 2019 7:55 am
Forum: Wireless Networking
Topic: Backhaul speeds - N only / AC only or mixed mode
Replies: 3
Views: 394

Re: Backhaul speeds - N only / AC only or mixed mode

Yes. It is our infrastructure. I wasn't sure if mixed mode would slow the network if there are no legacy clients. We now have more incoming bandwidth at some of our sites, so I am refining our backhauls to make better use of the bandwidth. I am going to convert some links to Greenfield mode to see ...
by mistry7
Thu Jan 10, 2019 10:29 am
Forum: Announcements
Topic: v6.42.11 [long-term] is released!
Replies: 42
Views: 8178

Re: v6.42.11 [long-term] is released!

What are you trying to achieve here, rextended ? You have always had two choices: 1) Set Country, follow regulations, follow frequency list, output power, trust automatic settings like DFS etc. 2) Set no-country, use manual power, manual frequency, manual all things. So how come something got broke...
by mistry7
Thu Jan 10, 2019 8:58 am
Forum: Wireless Networking
Topic: Problems accessing wAP G-5HacT2HnD
Replies: 13
Views: 561

Re: Problems accessing wAP G-5HacT2HnD

I've created minimum config, bridge receives proper IP, WLAN is working, but again I cannot access the admin interface (works only via Winbox/MAC) - it is the same situation as in QuickSetup with WISP & bridge configuration. So how can I bring up admin interface on bridge / ethernet? Thank you, Bes...
by mistry7
Wed Jan 09, 2019 10:52 am
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 572
Views: 54142

Re: ARM devices and NV2 protocol

802.11ax may change things 802.11ax is useless without Software revolution, but with the delay they have had for AC, we would probably see AX in 2021, ROS 7 could be available..... Why not discuss alternative? They don’t answer anything, so I think they don’t need to sell 802.11 Hardware anymore, a...
by mistry7
Wed Jan 09, 2019 7:07 am
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 572
Views: 54142

Re: ARM devices and NV2 protocol

what are the models and how much are they?
B5 and B5c are PTP Radios

B5 has integrated Antenna and B5c is connector based

https://mimosa.co/products/specs/b5
by mistry7
Tue Jan 08, 2019 11:36 pm
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 572
Views: 54142

Re: ARM devices and NV2 protocol

we should return to mikrotik all the arm and be exchanged ... what do you think? I hate this situacion, my clients dont stop to call me... I had to change a lot of equipment We did not deploy much of them, and after our stock with Mispbe is empty we changed brandm They don’t care, why we should care?
by mistry7
Tue Jan 08, 2019 2:55 pm
Forum: RouterBOARD hardware
Topic: RB4011 wireless performance?
Replies: 26
Views: 3024

Re: RB4011 wireless performance?

Can you all list exact Intel wireless chips that were in the clients, when the test performed so poorly?
In our case this one
https://gzhls.at/blob/ldb/5/6/6/a/3594c ... 3ecafb.pdf

Only 54 MBit @ ac
by mistry7
Mon Jan 07, 2019 11:32 pm
Forum: RouterOS v6 RC and v7 BETA
Topic: Linux kernel 4.x - when?
Replies: 8
Views: 1957

Re: Linux kernel 4.x - when?

A little birdie whispered into my ear that March is a welcoming month full of surprises. :-)

Indeed. Unlike previous years solar equinox is going to happen around 21st marking start of Fall on southern hemisphere. :mrgreen:
He is talking about MUM Europe
by mistry7
Mon Jan 07, 2019 7:37 pm
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 572
Views: 54142

Re: ARM devices and NV2 protocol

What I meant to say was - for other competitors to deliver higher speeds (exclude full duplex) are they using 80-160Mhz bandwidth per AP channel ?
No they don’t use MT for Wireless
by mistry7
Mon Jan 07, 2019 4:29 pm
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 572
Views: 54142

Re: ARM devices and NV2 protocol

We have a lot of Mikrotik CPE out there, but in last 6 month we realized how competitors are able to deliver higher speeds, Mikrotik is outdated, I don’t believe that we came back to Mikrotik
Deliver higher speed using how much bandwidth (80-160MHz?)
No, try 280MBIt TCP with Mikrotik @40mhz
by mistry7
Mon Jan 07, 2019 3:38 pm
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 572
Views: 54142

Re: ARM devices and NV2 protocol

New firmware, same problem :(
Wait for Christmas.....
by mistry7
Mon Jan 07, 2019 11:15 am
Forum: Wireless Networking
Topic: 2. PTP Network problem.
Replies: 6
Views: 430

Re: 2. PTP Network problem.

Excuse me.
ap1s bridge
ap1c station bridge
ap2s bridge
ap2c station pseudobridge
For all Mikrotik don’t use pseudobridge
by mistry7
Sun Jan 06, 2019 11:54 pm
Forum: General
Topic: What are these unknown PCI resource on RB4011?
Replies: 4
Views: 360

Re: What are these unknown PCI resource on RB4011?

That’s the Wireless speed, unsupported at this moment
by mistry7
Sun Jan 06, 2019 11:46 pm
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 572
Views: 54142

Re: ARM devices and NV2 protocol

I Hope arm solution every day...
We have a lot of Mikrotik CPE out there, but in last 6 month we realized how competitors are able to deliver higher speeds, Mikrotik is outdated, I don’t believe that we came back to Mikrotik
by mistry7
Sun Jan 06, 2019 10:28 pm
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 572
Views: 54142

Re: ARM devices and NV2 protocol

it's an hardware bug and it can't be resolved possible, we cannot control it, no other vendor in WISP business has ARM and TDMA..... BUT IF IT HARDWARE, WHY THEY DON´T SELL THE OLD STUFF...... Cambium have ARM epmp-force-300-25 They must disable 3 cores & use only ONE CORE at this moment but works ...
by mistry7
Sun Jan 06, 2019 11:29 am
Forum: Wireless Networking
Topic: 2. PTP Network problem.
Replies: 6
Views: 430

Re: 2. PTP Network problem.

modem is dhcp server. ap devices are static ip. another pc and phones are using dhcp. ap1s ptp bridge ap ap1c ptp bridge cpe ap2s ptp bridge ap ap2c ptp bridge cpe ap1s mikrotik ap1c mikrotik ap2s mikrotik ap2c mikrotik We want to now, what you have selected in wireless tab, like - AP Bridge - Brid...
by mistry7
Sun Jan 06, 2019 11:15 am
Forum: Wireless Networking
Topic: 60GHz proximity and colocation
Replies: 13
Views: 922

Re: 60GHz proximity and colocation

As @mistry7 wrote: the biggest problem about antennae co-location is interference from other antennae on same location. Due to low-cost design of Rx part of devices there's not much to be done in settings. The only thing that helps is to have as much RF separation between antennae as possible. If a...
by mistry7
Sun Jan 06, 2019 12:11 am
Forum: RouterBOARD hardware
Topic: RB4011 wireless performance?
Replies: 26
Views: 3024

Re: RB4011 wireless performance?

Put OpenWRT on the wAP AC and with the newer Kernel and drivers you will get about 450MBit Is this something you can prove in a video or something? A post like that would blow up around here I should think. Might get some grease to the squeaky wheels. My Internet connection is not fast enough to ma...
by mistry7
Sat Jan 05, 2019 10:11 pm
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 572
Views: 54142

Re: ARM devices and NV2 protocol

it's an hardware bug and it can't be resolved
possible, we cannot control it, no other vendor in WISP business has ARM and TDMA.....
BUT IF IT HARDWARE, WHY THEY DON´T SELL THE OLD STUFF......
by mistry7
Sat Jan 05, 2019 9:48 pm
Forum: RouterBOARD hardware
Topic: RB4011 wireless performance?
Replies: 26
Views: 3024

Re: RB4011 wireless performance?

My Indoor units have improved to about 45% of what they CLAIM as throughput. When i first got the cAP AC and hAP AC2 on the bench I was getting around 10% of the proposed 866M of transfer rates. A bunch of RouterOS Updates and several months later, I am in the low 300s. The wAP AC despite being 3x3...
by mistry7
Sat Jan 05, 2019 5:06 pm
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 572
Views: 54142

Re: ARM devices and NV2 protocol

From support:

Hello,

Apologies for the inconvenience, this issue is being investigated by our development team and should be fixed in the upcoming releases of the RouterOS.

Best regards,
i´ve got this mail in march 18 some days before mum Berlin..... and until now nothing
by mistry7
Sat Jan 05, 2019 3:34 pm
Forum: RouterBOARD hardware
Topic: RB4011 wireless performance?
Replies: 26
Views: 3024

Re: RB4011 wireless performance?

At this moment bad, we tested 3 Intel Based AC Laptops and both are only able to connect to 54 MBit..... Kind of seems "par" for Mikrotik with wireless devices. They release them and it takes several months and routerOS/firmwares before they start showing acceptable results. I went through that wit...
by mistry7
Sat Jan 05, 2019 6:44 am
Forum: RouterBOARD hardware
Topic: RB4011 wireless performance?
Replies: 26
Views: 3024

Re: RB4011 wireless performance?

At this moment bad, we tested 3 Intel Based AC Laptops and both are only able to connect to 54 MBit.....
by mistry7
Sat Jan 05, 2019 1:56 am
Forum: Wireless Networking
Topic: 60GHz proximity and colocation
Replies: 13
Views: 922

Re: 60GHz proximity and colocation

If you are able to do a metal shield on the back of the dish, you would not see any
Interfering
by mistry7
Thu Jan 03, 2019 1:34 pm
Forum: General
Topic: Hacked Board
Replies: 15
Views: 1353

Re: Hacked Board

The rules are the same that were added by the old hack/exploit script. So 99.99% chance that these rules you had even before upgrade, and they kept sending the attacker your passwords, old and new, even after upgrade. upgrading patches the vulnerability, it doesn't modify your config. if you had su...
by mistry7
Thu Jan 03, 2019 10:58 am
Forum: General
Topic: Hacked Board
Replies: 15
Views: 1353

Re: Hacked Board

mistry7 - Are you 100% sure that you changed all the passwords on your router for all the users configured on it? Are you 100% sure that passwords were changed after an upgrade to v6.43 not before that? One user only on all boards, yes in PW list change is Dokumented with date, and there are 3 upda...
by mistry7
Thu Jan 03, 2019 4:47 am
Forum: Beginner Basics
Topic: receive sensitivity for metal 2
Replies: 5
Views: 379

Re: receive sensitivity for metal 2

please explain for what you need this.
With signals weaker then -90 you would not be able to transport anything serious
by mistry7
Thu Jan 03, 2019 2:06 am
Forum: General
Topic: Hacked Board
Replies: 15
Views: 1353

Re: Hacked Board

Changing passwords is not enough, you MUST netinstall any compromised device! This is first and only board I found. We did update on all core routers in the same night the updates was available in the early morning all CPEs We checked all login protocols (2weeks back) there was no login to our bord...
by mistry7
Thu Jan 03, 2019 1:57 am
Forum: General
Topic: Should MikroTik make more powerful antennas and wireless protocols in 2019?
Replies: 19
Views: 1363

Re: Should MikroTik make more powerful antennas and wireless protocols in 2019?

You know that we will not see new kernel on current RBs? Update actual RBs or make new ones with new kernel, better hardware and so on, what's the best choice for MK that is selling their products? Come on, it's not so different than smartphones. It is different no one buys Andoid 2.3 phones today....
by mistry7
Wed Jan 02, 2019 7:55 pm
Forum: General
Topic: Hacked Board
Replies: 15
Views: 1353

Re: Hacked Board

But if it's 6.43.x how can it be exploited as to my knowledge there are no open security bugs? There was at least one open security bug (fixed in 6.43.8) that could be used when the password was known. The password may have leaked earlier or using another mechanism. Impossible, after Winbox hack, w...
by mistry7
Wed Jan 02, 2019 6:31 pm
Forum: General
Topic: Hacked Board
Replies: 15
Views: 1353

Re: Hacked Board

single router on single VDSL Connection, no other Mikrotik devices....
IP Filter for services is enabled since installation.....(2017)
by mistry7
Wed Jan 02, 2019 3:48 pm
Forum: General
Topic: Hacked Board
Replies: 15
Views: 1353

Hacked Board

Hi, i found an hacked board running was on 6.43.2 I´dont now how this had worked, we use Firewall and winbox only responded to known IP (our IP´s) All Services Ports are changed ssh=62000 www-ssl=65002 api=64000 winbox=65000 api-all=63000 the wired think is, i have full rights but it is not possible...
by mistry7
Tue Jan 01, 2019 5:35 pm
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 572
Views: 54142

Re: ARM devices and NV2 protocol

Easy, very easy don´t buy unfixed product. Buy mipsbe thats works fine
There are no mispbe ac CPE‘s available they are all legacy
A serious manufacturer had stopped ARM Hardware with issues and delivers the old working hardware to coustomers
by mistry7
Tue Jan 01, 2019 4:37 pm
Forum: Wireless Networking
Topic: Cap AC, Hap AC2 or UniFi?
Replies: 38
Views: 8387

Re: Cap AC, Hap AC2 or UniFi?

Yes it is true, Mikrotik is far away from good speeds on there Wireless Systems @2,4Ghz and 5 GHz, they need to think about that, but they don’t care...
by mistry7
Mon Dec 31, 2018 1:30 pm
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 572
Views: 54142

Re: ARM devices and NV2 protocol

Maybe with new drivers in V7 but the main question is when V7 'll be released?
Maybe in 2019, but they don’t care, so we don’t care too, we has to grow, and did exchange on some Places with great success, we don’t need Mikrotik anymore....
by mistry7
Mon Dec 31, 2018 9:52 am
Forum: Wireless Networking
Topic: RB922UAGS-5HPacD slow speed [SOLVED]
Replies: 13
Views: 1153

Re: RB922UAGS-5HPacD slow speed [SOLVED]

What client devices you are using?
Sxt Lite5 ac?
Yes, and I used NV2
Do you deliver voice / sip service ?
If not try 802.11, for higher speeds
by mistry7
Sun Dec 30, 2018 10:54 pm
Forum: RouterBOARD hardware
Topic: QRT 2 4 KM ¿HOW MEGAS?
Replies: 4
Views: 392

Re: QRT 2 4 KM ¿HOW MEGAS?

I want to instal ptp qrt about 4 km and i need aprox how megas i can pass.

Thank you
depends on EIRP you are able to go
Only EIRP qrt 2
What is allowed? 20dbm?
by mistry7
Sun Dec 30, 2018 10:53 pm
Forum: Wireless Networking
Topic: RB922UAGS-5HPacD slow speed [SOLVED]
Replies: 13
Views: 1153

Re: RB922UAGS-5HPacD slow speed [SOLVED]

What client devices you are using?
Sxt Lite5 ac?
by mistry7
Sun Dec 30, 2018 1:25 pm
Forum: Wireless Networking
Topic: What about WPA3
Replies: 3
Views: 731

Re: What about WPA3

Thanks Mistry7 This will be investing, but is not yet for now. Many devices still do not support that One Device with WPA3... https://wikidevi.com/wiki/Synology_RT2600ac There are much IPQ devices from MT...... But Mikrotik is 5 years behind with ROS.... So it will take a long time... we will see R...
by mistry7
Sun Dec 30, 2018 1:19 pm
Forum: RouterBOARD hardware
Topic: QRT 2 4 KM ¿HOW MEGAS?
Replies: 4
Views: 392

Re: QRT 2 4 KM ¿HOW MEGAS?

I want to instal ptp qrt about 4 km and i need aprox how megas i can pass.

Thank you
depends on EIRP you are able to go
by mistry7
Sun Dec 30, 2018 1:18 pm
Forum: Wireless Networking
Topic: RB922UAGS-5HPacD slow speed [SOLVED]
Replies: 13
Views: 1153

Re: RB922UAGS-5HPacD slow speed [SOLVED]

Hello this is my wireless registration

Image
looks not bad at all, but it client how has 86 Mbit limits all other if he es transfer data.......
just add ccq (click right on the arrow (down) and select ccq)
by mistry7
Sun Dec 30, 2018 1:14 pm
Forum: General
Topic: Has this remote ROOT exploit been patched??
Replies: 22
Views: 1568

Re: Has this remote ROOT exploit been patched??

Show us your firewall configuration I have no firewall configuration and I do not know how to configure it. As I stated from the beginning, I am not a router OS guy. It is as it was from the default settings. There are no "filter rules" listed. Not understanding I have been hesitant to add rules fo...
by mistry7
Sun Dec 30, 2018 11:30 am
Forum: Wireless Networking
Topic: What about WPA3
Replies: 3
Views: 731

Re: What about WPA3

All ac hardware should be useable,
But not with ROS 6 based on Linux Kernel 3.3.5 (2013)
by mistry7
Sun Dec 30, 2018 11:28 am
Forum: Wireless Networking
Topic: How to increase wireless speed of hAP ac²?
Replies: 8
Views: 756

Re: How to increase wireless speed of hAP ac²?

Just make some test with large file transfer. Laptop is Lenovo X220 with Intel Centrino Advanced N-6205 300Mbps adapter and another PC is connected with Ethernet cable. Channel width is 40MHz and adapter is rated 300Mpbs/300Mbps, no other station on 5GHz near me. The speed vary between 185Mbps and ...
by mistry7
Sun Dec 30, 2018 11:26 am
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 538
Views: 54898

Re: LHG 60G experience

I see everybody suggesting a specific 3rd party precision alignment mount but nobody suggested the Mikrotik solidMount https://mikrotik.com/product/solidmount It does look proper for the job and it is actually half price from the 3rd party one. Has anybody got any experience with it? Is it any good...
by mistry7
Sun Dec 30, 2018 10:25 am
Forum: General
Topic: Has this remote ROOT exploit been patched??
Replies: 22
Views: 1568

Re: Has this remote ROOT exploit been patched??

Show us your firewall configuration