Community discussions

Search found 126 matches

by bda
Tue Sep 28, 2010 12:30 pm
Forum: General
Topic: PPPoE + Radius
Replies: 9
Views: 1316

Re: PPPoE + Radius

Hi all, I configurated a PPPoE server and it's working OK. But I've more than one network with the gateway in the same interface where is running the PPPoE server. I don't know how to configure the Local Address option in the profile of the PPPoE because each client will be in different networks. T...
by bda
Tue Sep 28, 2010 8:46 am
Forum: General
Topic: Need help with Radius CoA
Replies: 15
Views: 3244

Need help with Radius CoA

Dear developers, I've got problem with Radius CoA. Details: Radius server send CoA request for some current session: 09-28/09:38:19 INFO [nas-con-insp-PodNasConnectionInspector-rtr22] connections - [ 000006; test6@virtual; 74450 ] CoA packet on 10.13.28.160:1700 Packet type: CoA-Request Identifier: ...
by bda
Fri Sep 17, 2010 9:30 am
Forum: Forwarding Protocols
Topic: How to put dynamic interfaces to specific VRF
Replies: 7
Views: 4231

Re: How to put dynamic interfaces to specific VRF

/pppoe server add name=client1 ... /ip route vrf add routing-mark=test inteface=client1 Thanks... understood. It is not so perfect for dynamic interfaces and pppoe aggregation services. But can I use some sort of script? Does ROS have tool set for changing routing table for interface in near online...
by bda
Fri Sep 17, 2010 8:16 am
Forum: Forwarding Protocols
Topic: How to put dynamic interfaces to specific VRF
Replies: 7
Views: 4231

Re: How to put dynamic interfaces to specific VRF

It is not possible at the moment, you need to add static pppoe entries in server list and then add them manually to vrf
Oh... sounds very catastrophic for me... But could you please explain your statement in more detail. Sorry, but I don`t understand the procedure...
by bda
Fri Sep 17, 2010 7:23 am
Forum: Forwarding Protocols
Topic: How to search specific route in specific vrf?
Replies: 8
Views: 1934

Re: How to search specific route in specific vrf?

Dear Dev. Team! Pls help me to resolve this problem. Sorry for bumping.
by bda
Fri Sep 17, 2010 7:22 am
Forum: Forwarding Protocols
Topic: How to put dynamic interfaces to specific VRF
Replies: 7
Views: 4231

How to put dynamic interfaces to specific VRF

Dear friends!

Is it possible to put dynamic PPPoE interfaces to specific VRF. For example, my internet table lies in vrf-internet, but newly created PPPoE interfaces are all in main routing table after creation.
by bda
Wed Sep 15, 2010 5:52 pm
Forum: Forwarding Protocols
Topic: internet access from main table, if internet is in vrf
Replies: 4
Views: 1188

Re: internet access from main table, if internet is in vrf

Yes, as far as I know it is not possible to have the main routing table utilize routes from a VRF. I've never seen a way to do this in MikroTik or Cisco. Thank you... it is very pity.... Hmm... And if I transfer inner src nat interface to another vrf from main table? Maybe dear developers say somet...
by bda
Wed Sep 15, 2010 6:48 am
Forum: Forwarding Protocols
Topic: internet access from main table, if internet is in vrf
Replies: 4
Views: 1188

Re: internet access from main table, if internet is in vrf

You really need to set things up the other way around. Internet in main routing table. Other interfaces in VRF.

http://wiki.mikrotik.com/wiki/Manual:In ... s_from_VRF
http://wiki.mikrotik.com/wiki/Internet_ ... F_with_NAT
Is it only way possible?
by bda
Tue Sep 14, 2010 5:09 pm
Forum: Forwarding Protocols
Topic: internet access from main table, if internet is in vrf
Replies: 4
Views: 1188

internet access from main table, if internet is in vrf

Dear developers and users, i need your help. The situation is: some interfaces are in main routing table, but internet interfaces and internet FullV are in separate vrf. How can i grant nated access from main table to internet? I have read wiki article, but, it describe some other setup: access from...
by bda
Sat Sep 11, 2010 11:07 am
Forum: Forwarding Protocols
Topic: How to search specific route in specific vrf?
Replies: 8
Views: 1934

Re: How to search specific route in specific vrf?

I`m still have problem with searching routes in specific vrf... Can anybody help me?
by bda
Wed Sep 08, 2010 12:34 pm
Forum: Forwarding Protocols
Topic: How to search specific route in specific vrf?
Replies: 8
Views: 1934

Re: How to search specific route in specific vrf?

Which version you are running? Works fine on v5.
I have 5.0beta6
by bda
Wed Sep 08, 2010 10:13 am
Forum: Forwarding Protocols
Topic: How to search specific route in specific vrf?
Replies: 8
Views: 1934

Re: How to search specific route in specific vrf?

/ip route print det where dst-address=3.3.3.3/32 routing-mark="lala" Hmm... Not working. /ip route print det where dst-address =1.177.124.0/22 routing-mark ="vrf-internet" Flags: X - disabled, A - active, D - dynamic, C - connect, S - static, r - rip, b - bgp, o - ospf, m - mme, B - blackhole, U - ...
by bda
Wed Sep 08, 2010 9:43 am
Forum: Forwarding Protocols
Topic: How to search specific route in specific vrf?
Replies: 8
Views: 1934

How to search specific route in specific vrf?

I have internet table in vrf-internet. For example: 287 ADb dst-address=1.177.116.0/22 gateway=213.137.224.33 gateway-status=213.137.224.33 on vrf-internet reachable ether3 distance=200 scope=40 target-scope=30 routing-mark=vrf-internet bgp-as-path="20485,3491,9318,38091,9845,9845,9845,9845,9845,101...
by bda
Tue Sep 07, 2010 10:59 pm
Forum: Forwarding Protocols
Topic: Please describe "routing-table=" statement
Replies: 7
Views: 2165

Re: Please describe "routing-table=" statement

some new parameters are available only in Terminal. later they are being added to WinBox
Ok, thanks. Understood.
by bda
Tue Sep 07, 2010 10:26 am
Forum: Forwarding Protocols
Topic: How to inject default route to some vrf and adv. to peers?
Replies: 8
Views: 2155

Re: How to inject default route to some vrf and adv. to peer

This option is not up to date in winbox. Use CLI to set default-originate=always and nothing will be reset unless you open peer config in winbox and make any changes then default-originate will be set to winbox defaults.

Ok, thanks.
by bda
Tue Sep 07, 2010 6:25 am
Forum: Forwarding Protocols
Topic: How to inject default route to some vrf and adv. to peers?
Replies: 8
Views: 2155

Re: How to inject default route to some vrf and adv. to peer

Dear developers, is it right to reset peer parameter default-originate=always to default-originate=if-installed , after peer restart via winbox? Pls help...
by bda
Mon Sep 06, 2010 12:42 pm
Forum: Forwarding Protocols
Topic: Please describe "routing-table=" statement
Replies: 7
Views: 2165

Re: Please describe "routing-table=" statement

Yes you can configure it in winbox.
Routing->BGP->VRFs(tab)
But I cant specify routing table parameter for bgp instance via winbox. Is it right?
Dear developers, could you describe situation with routing table parameter and winbox, please... Sorry for bumping this post...
by bda
Sun Sep 05, 2010 1:46 pm
Forum: Forwarding Protocols
Topic: Please describe "routing-table=" statement
Replies: 7
Views: 2165

Re: Please describe "routing-table=" statement

Yes you can configure it in winbox.
Routing->BGP->VRFs(tab)
But I cant specify routing table parameter for bgp instance via winbox. Is it right?
by bda
Sun Sep 05, 2010 11:46 am
Forum: Forwarding Protocols
Topic: How to inject default route to some vrf and adv. to peers?
Replies: 8
Views: 2155

Re: How to inject default route to some vrf and adv. to peer

Solved. peer set default-originate=always rtr11 do the trick. ? So, Winbox defaults to if-installed when you check default-originate ? Interesting. When you said you had default-originate turned on I assumed you were using the option always . I prefer the command line due to these types of inconsis...
by bda
Sun Sep 05, 2010 1:10 am
Forum: Forwarding Protocols
Topic: How to inject default route to some vrf and adv. to peers?
Replies: 8
Views: 2155

Re: How to inject default route to some vrf and adv. to peer

Solved.
peer set default-originate=always rtr11
do the trick. Winbox only have default originate checkbox, and has no menu in which we can select options...

UPDATE. pls, can anybody describe, why after peer restart - the default-originate=always reset to if-installed?
by bda
Sat Sep 04, 2010 11:29 pm
Forum: Forwarding Protocols
Topic: How to inject default route to some vrf and adv. to peers?
Replies: 8
Views: 2155

Re: How to inject default route to some vrf and adv. to peer

Did you try this?
/routing bgp peer refresh-all
Of course!
by bda
Sat Sep 04, 2010 8:16 pm
Forum: Forwarding Protocols
Topic: How to inject default route to some vrf and adv. to peers?
Replies: 8
Views: 2155

How to inject default route to some vrf and adv. to peers?

Dear developers... How to inject default route to some vrf to advertise it to peers in this vrf? Simply adding "default originate" do nothing... Is it possible at all?
by bda
Sat Sep 04, 2010 7:27 pm
Forum: Forwarding Protocols
Topic: Please describe "routing-table=" statement
Replies: 7
Views: 2165

Re: Please describe "routing-table=" statement

Thanks for detailed explanation! But than we can do it for bgp instance via winbox?
by bda
Sat Sep 04, 2010 8:51 am
Forum: Forwarding Protocols
Topic: Please describe "routing-table=" statement
Replies: 7
Views: 2165

Please describe "routing-table=" statement

Dear developers, describe please "routing-table=" statement, and how it impact on mp-bgp. There is no clear detail description in wiki.

Should the default bgp instance be in some routing table? And what about vrf`s? Every vrf in separate routing table? Why winbox does not have this property for vrf?
by bda
Sat Sep 04, 2010 8:44 am
Forum: Forwarding Protocols
Topic: ijecting local generated routes to some vrf [solved]
Replies: 2
Views: 1176

Re: ijecting local generated routes to some vrf

I've track an error! Thanks. The problem was in absence static redistribution in vrf configuration.
by bda
Fri Sep 03, 2010 11:35 am
Forum: Forwarding Protocols
Topic: ijecting local generated routes to some vrf [solved]
Replies: 2
Views: 1176

ijecting local generated routes to some vrf [solved]

Need help. The situation is: I cannot install local generated routes in some vrf, if this vrf is advertised to bgp-ce peer. Routes form that peer are successfully installed to target vrf, but my routes does not. The CE-router is cisco 2801 router this simply config and no input filter. The Cisco deb...