Community discussions

Search found 2388 matches

by plisken
Sun Oct 23, 2011 1:18 am
Forum: Beginner Basics
Topic: Repeater ! Please Help if you can..
Replies: 2
Views: 894

Re: Repeater ! Please Help if you can..

Indeed, that is, it is best to use all the same access points. Remember, a repeater means half speed.
There is only one antenna per AP needed

Find the error in two different access points
That's all, different access points do not communicate with the same language
by plisken
Thu Oct 20, 2011 9:29 am
Forum: Wireless Networking
Topic: Senao :: EMP-8603 v2 High Power Atheros 6thG miniPCI module
Replies: 1
Views: 620

Senao :: EMP-8603 v2 High Power Atheros 6thG miniPCI module

Dear, is Senao :: EMP-8603 v2 High Power Atheros 6thG miniPCI module compatible with RB411AH?
I use 24 volt 1 Amp power over ethernet.
Thanks in advance
by plisken
Fri Oct 14, 2011 10:28 am
Forum: Beginner Basics
Topic: Routing Mark
Replies: 3
Views: 843

Re: Routing Mark

Thanks for your answer but... As a beginner I understand nothing of what is in the wiki. I can not good read English sorry about it. I want my subnet 192.168.100.0/24 for example, eth3 connect to an ISP 1(Telenet) eth1 192.168.0.1/24 Default Gateway My other subnet 192.168.101.0/24 eth4 I connect to...
by plisken
Fri Oct 14, 2011 10:12 am
Forum: Beginner Basics
Topic: Broadcast gone
Replies: 2
Views: 428

Re: Broadcast gone

However, I am sorry, it was a great help for beginners.
No programs needed, it was onboard and it was all in a simple way
Again sorry that this has gone, I think this is not so good for beginners
I hope this comes back, and many others with me
Thanks for the repley
by plisken
Fri Oct 14, 2011 12:27 am
Forum: Beginner Basics
Topic: Routing Mark
Replies: 3
Views: 843

Routing Mark

How do I create a routing mark
What purpose is it?
I'm a beginner.
by plisken
Thu Oct 13, 2011 11:07 am
Forum: Beginner Basics
Topic: eoip tunnel
Replies: 3
Views: 655

Re: eoip tunnel

Thanks for your reply's
by plisken
Wed Oct 12, 2011 8:59 pm
Forum: Beginner Basics
Topic: Broadcast gone
Replies: 2
Views: 428

Broadcast gone

For older versions routeros was the broadcast IP address, not anymore.
Was very easy, why did you leave that way?
Was very easy to find the IP range.
Can you replace that?
Thanks
by plisken
Thu Oct 06, 2011 4:06 pm
Forum: Beginner Basics
Topic: eoip tunnel
Replies: 3
Views: 537

Re: eoip tunnel

Tnx for the reacting.
Do I have to work with existing IP addresses or create new?
Which remote IP's should I use?
by plisken
Thu Oct 06, 2011 1:47 pm
Forum: Beginner Basics
Topic: eoip tunnel
Replies: 3
Views: 537

eoip tunnel

Who can tell me exactly how to proceed in order to create a eoip tunnel to two router boards.
I used eth2 by both routerboards (wired) eth2 rb1 get ip 192.168.50.1/30, eth2 rb2 get ip 192.168.50.2/30
I've seen the wiki but do not understand.
Pleace help me.
by plisken
Mon Oct 03, 2011 4:20 pm
Forum: Beginner Basics
Topic: RouterOs 3.30
Replies: 2
Views: 553

RouterOs 3.30

I'm looking for routeros 3.30 for RB750
Thanks
by plisken
Fri Sep 30, 2011 11:42 pm
Forum: Beginner Basics
Topic: Wich RB is ideal for small Distance (0.401 mil or 0.646 km)
Replies: 9
Views: 1547

Re: Wich RB is ideal for small Distance (0.401 mil or 0.646

For a point to point link maybe RBSXT
In the understanding that you have a line of sight
by plisken
Thu Sep 29, 2011 5:04 pm
Forum: Beginner Basics
Topic: eoip tunnel
Replies: 3
Views: 655

eoip tunnel

Maybe a stupid question, what does a eoip tunnel?
by plisken
Fri Jul 15, 2011 10:29 am
Forum: Beginner Basics
Topic: abuot rb411h or rb433 configuration
Replies: 1
Views: 721

Re: abuot rb411h or rb433 configuration

Dear, sorry for my bad English but i true to help you. Antenna gain: Enter your antenna strength, for example 10DB Tx Power = radiated power of your radio without antenna card. = Rate for me, this set i always automatically Ack-Timing: Enter the distance between two stations. N-stream i don't know I...
by plisken
Sun Jul 10, 2011 1:06 am
Forum: Beginner Basics
Topic: rb750 routeros 3. ...
Replies: 2
Views: 585

Re: rb750 routeros 3. ...

Thanks, you are a great help.
by plisken
Sat Jul 09, 2011 12:09 am
Forum: Beginner Basics
Topic: rb750 routeros 3. ...
Replies: 2
Views: 585

rb750 routeros 3. ...

I am looking for my RB750
routeros 3. ...
Where can I download
powered by
by plisken
Thu Jul 07, 2011 8:39 pm
Forum: Beginner Basics
Topic: See used protocols and bandwith
Replies: 4
Views: 606

Re: See used protocols and bandwith

Thanks, i found it.
by plisken
Tue Jul 05, 2011 8:24 pm
Forum: Beginner Basics
Topic: See used protocols and bandwith
Replies: 4
Views: 606

Re: See used protocols and bandwith

i don't find it
by plisken
Tue Jul 05, 2011 2:36 pm
Forum: Beginner Basics
Topic: See used protocols and bandwith
Replies: 4
Views: 606

See used protocols and bandwith

Dear, ca i see what people are using the protocols on my router board. And how much bandwidth they consume in one day? If so, how do I set the router board?
by plisken
Sun Jul 03, 2011 8:05 pm
Forum: Beginner Basics
Topic: firewall and proxy
Replies: 2
Views: 610

Re: firewall and proxy

Ok thanks for your quick respond.
I'ts works, i"m learn again.
Thanks
by plisken
Sun Jul 03, 2011 5:09 pm
Forum: Beginner Basics
Topic: firewall and proxy
Replies: 2
Views: 610

firewall and proxy

How do I block ports, and websites I have a 750 rb Ether 1 = isp ether 2 = lan 192.168.1.0/24 standard gateway 192.168.0.1 settings ip address print detail Flags: X - disabled, I - invalid, D - dynamic 0 D address=192.168.0.3/24 network=192.168.0.0 interface=ether1 actual-interface=ether1 1 address=...
by plisken
Fri Jun 24, 2011 11:38 am
Forum: Beginner Basics
Topic: flow over settings
Replies: 8
Views: 1544

Re: flow over settings

Ok, thanks, i try it out.
you are a great help to me.
by plisken
Thu Jun 23, 2011 11:45 pm
Forum: Beginner Basics
Topic: flow over settings
Replies: 8
Views: 1544

Re: flow over settings

Thanks for your quick answer.
there is a possibility if I ip's of the two ISPs make static?
by plisken
Thu Jun 23, 2011 7:43 pm
Forum: Beginner Basics
Topic: flow over settings
Replies: 8
Views: 1544

Re: flow over settings

[admin@MikroTik] > ip firewall export # jan/02/1970 00:37:27 by RouterOS 5.4 # software id = 5BDA-Q24F # /ip firewall connection tracking set enabled=yes generic-timeout=10m icmp-timeout=10s tcp-close-timeout=10s \ tcp-close-wait-timeout=10s tcp-established-timeout=1d tcp-fin-wait-timeout=\ 10s tcp-...
by plisken
Thu Jun 23, 2011 4:12 pm
Forum: Beginner Basics
Topic: flow over settings
Replies: 8
Views: 1544

flow over settings

I have two ISPs connects I want if isp one failed that isp2 take over. ISP = 1 ip = dhcp client 192.168.0.5/24 ether1 ISP 2 = dhcp client ip = 10.98.247.144 ether2 Lan connection = 192.168.100.1/24 ether3 dhcp range = 192.168.100.2 to 192,168,100,254 Both nat actions settings to masquerade I load he...
by plisken
Tue Jun 14, 2011 2:11 am
Forum: Beginner Basics
Topic: Routeren
Replies: 7
Views: 823

Re: Routeren

Thanks for your help again.
by plisken
Mon Jun 13, 2011 12:18 pm
Forum: Beginner Basics
Topic: Routeren
Replies: 7
Views: 823

Re: Routeren

Here my schema
by plisken
Mon Jun 13, 2011 12:13 pm
Forum: Beginner Basics
Topic: Routeren
Replies: 7
Views: 823

Re: Routeren

This is what i have done,
no firewall rules, no forwarding settings
How take i prints of my settings?
by plisken
Mon Jun 13, 2011 2:12 am
Forum: Beginner Basics
Topic: Routeren
Replies: 7
Views: 823

Re: Routeren

I can't still connect with internet.
i have the route add.
by plisken
Mon Jun 13, 2011 12:42 am
Forum: Beginner Basics
Topic: Routeren
Replies: 7
Views: 823

Routeren

ether1 = ISP ip range 192.168.0.0/24 gw 192.168.0.1
Ether2 = 192.168.100.1/24 DHCP server enabled.
I want this route without nat maskerading , can I?
How?
by plisken
Fri Jun 03, 2011 6:01 pm
Forum: Beginner Basics
Topic: 2 dhcp servers to 1 ethernet on rb750
Replies: 4
Views: 1153

Re: 2 dhcp servers to 1 ethernet on rb750

I understand, thanks for your answer.
by plisken
Fri Jun 03, 2011 5:28 pm
Forum: Beginner Basics
Topic: 2 dhcp servers to 1 ethernet on rb750
Replies: 4
Views: 1153

Re: 2 dhcp servers to 1 ethernet on rb750

for a redundant network if dhcp server1 failed take the second dhcp it over.
by plisken
Fri Jun 03, 2011 2:14 pm
Forum: Beginner Basics
Topic: 2 dhcp servers to 1 ethernet on rb750
Replies: 4
Views: 1153

2 dhcp servers to 1 ethernet on rb750

I will set 2 dhcp servers on 1 ethernet port, if dhcp server1 failed take dhcp server2 over.
see printscreens what i done: If i disable dhcp server 1 as test) and restart computer, give dhcp2 server not ip adresses.
What do i wrong?
Sorry for my bad englisch
by plisken
Sat May 21, 2011 1:01 am
Forum: Wireless Networking
Topic: i need your opinion ?? please
Replies: 3
Views: 618

Re: i need your opinion ?? please

I think the link does not go faster.
if you have ubiquiti rocketdish
Airmax able to?
Turn it off.
I have a link from Ghent to Brussels in (53 km) with a throughput of 83 Mbit / sec
by plisken
Sun May 15, 2011 8:19 pm
Forum: Beginner Basics
Topic: RB750 Downgrade
Replies: 8
Views: 6104

Re: RB750 Downgrade

thanks, is worked with command:
"system package downgrade; /system reboot"
You was a great help, thank you very match
by plisken
Sun May 15, 2011 7:55 pm
Forum: Beginner Basics
Topic: RB750 Downgrade
Replies: 8
Views: 6104

Re: RB750 Downgrade

Oh yeh, i see the problem.
which allows me to do
by plisken
Sun May 15, 2011 6:03 pm
Forum: Beginner Basics
Topic: RB750 Downgrade
Replies: 8
Views: 6104

Re: RB750 Downgrade

log sayd nothing the routerboard is unconnected from network this bgp errors are normal
by plisken
Sun May 15, 2011 5:27 pm
Forum: Beginner Basics
Topic: RB750 Downgrade
Replies: 8
Views: 6104

Re: RB750 Downgrade

Thanks for the reply, i have done what you told, downloading the file from microtic and drag the file into the file window.
The file beeing upload to the router but if i reboot the router is it still version 5.2.
by plisken
Sun May 15, 2011 12:32 am
Forum: Beginner Basics
Topic: RB750 Downgrade
Replies: 8
Views: 6104

RB750 Downgrade

Dear, i have the rb750 geupdated with the 5.2 file, but in will back downgraden to ros 4.9.
I have two quistions, 1 where find i the 4.9 ros?
And how replace his back on rb 750
Pleace help me.