Community discussions

Search found 1681 matches

  • 1
  • 2
  • 3
  • 4
  • 5
  • 34
by Ibersystems
Fri Nov 29, 2013 12:48 pm
Forum: Wireless Networking
Topic: Transparent bridge without wds
Replies: 17
Views: 7911

Re: Transparent bridge without wds

Hello,


try to low the txpower to make tests in a room.

Fix it to 5 or 12 and try again.
by Ibersystems
Wed Nov 27, 2013 11:33 am
Forum: General
Topic: help me for hotspot troubleshooting
Replies: 10
Views: 1298

Re: help me for hotspot troubleshooting

Hello,


fill the hotspot/ipbindings with the IP of the server and type bypassed.


Notice that if a computer is not validated in the hotspot you wonnt be able to connect to this computer shared folder.
by Ibersystems
Wed Nov 27, 2013 11:32 am
Forum: Wireless Networking
Topic: Transparent bridge without wds
Replies: 17
Views: 7911

Re: Transparent bridge without wds

No. The SSID is the name of the network you see when searching a network via WiFi.

You will see 2 MAC when you are connected to the network, but not 2 SSID.
by Ibersystems
Wed Nov 27, 2013 11:10 am
Forum: Wireless Networking
Topic: Transparent bridge without wds
Replies: 17
Views: 7911

Re: Transparent bridge without wds

We are talking about a bridge, a link. Point to point.

One board working as station, is not showing a SSID, only bridge and ap bridge modes
by Ibersystems
Wed Nov 27, 2013 10:30 am
Forum: Wireless Networking
Topic: Transparent bridge without wds
Replies: 17
Views: 7911

Re: Transparent bridge without wds

I think bridge to station bridge
by Ibersystems
Wed Oct 09, 2013 4:32 pm
Forum: General
Topic: Need help to validate offices
Replies: 3
Views: 753

Re: Need help to validate offices

Hello, I can't reconfigure their routers, but I'm able to install them a new router or something... EX. a RB750 or something like that. What I saw is a cisco switch with authentication. 24 ports for the offices and 2 uplinks to use one in the room... They make the user/pass authentication in a local...
by Ibersystems
Wed Oct 09, 2013 1:47 pm
Forum: Wireless Networking
Topic: Hotspot Problem
Replies: 2
Views: 636

Re: Hotspot Problem

ip hotspot server, select the hotspot and click RESET HTML.
by Ibersystems
Wed Oct 09, 2013 1:46 pm
Forum: General
Topic: Need help to validate offices
Replies: 3
Views: 753

Need help to validate offices

Hello, I have a building with 24 companies. Each one works with one different network, firewall, ip subnet. The ip subnet could be the same in 2-3 or all the offices due to the internet connection isn't the same for each company. These companies don't have same internet connection, don't share nothi...
by Ibersystems
Tue Sep 24, 2013 2:28 pm
Forum: Beginner Basics
Topic: NAT dynamic rules in HotSpot
Replies: 2
Views: 653

Re: NAT dynamic rules in HotSpot

Why do you want to do this? : ?
by Ibersystems
Tue Sep 24, 2013 2:27 pm
Forum: RouterBOARD hardware
Topic: RB711-5Hn RJ45 connector.
Replies: 1
Views: 762

RB711-5Hn RJ45 connector.

Hello,

anyone know how to solder again the RJ45 connector? I have 11x broken..

Normis, do you have any manual of how to connect the rj45 conector to this boards without broken it.. o_Ou

I think the soldering of this component is not good. Really bad I mean.


thanks,
by Ibersystems
Fri Sep 13, 2013 1:02 pm
Forum: RouterBOARD hardware
Topic: routerboard hard drive full
Replies: 17
Views: 6473

Re: routerboard hard drive full

I suppose it's my fault for not sacrificing my eldest virgin daughter to the Gods of Mikrotik before experementing with Dude
:lol: :lol:
by Ibersystems
Fri Aug 23, 2013 8:40 pm
Forum: RouterOS v6 RC and v7 BETA
Topic: Small request for bridge
Replies: 4
Views: 1236

Re: Small request for bridge

Its faster click click click click xD
by Ibersystems
Tue Aug 20, 2013 10:24 am
Forum: RouterOS v6 RC and v7 BETA
Topic: Small request for bridge
Replies: 4
Views: 1236

Small request for bridge

Please, add this:
 int bridge port add bridge=bridge1 interface=all
and a button to add all interfaces to a bridge... or the option ALL to the combobox.

Now boards have lots of ports : P!

thanks,
by Ibersystems
Tue Aug 06, 2013 2:15 pm
Forum: Beginner Basics
Topic: SSTP Site to Site Routing won't work
Replies: 8
Views: 5211

Re: SSTP Site to Site Routing won't work

I just created a SSTP tunnel with all the routes and I'm able to make pings from sstpclientside to sstpserverside, but not the other way. Why? If I make tracert from a sstpserverside computer to any computer of clientsstpside, I can reach the 10.10.10.2 IP (SSTP client) but then all the jumps are 0....
by Ibersystems
Fri Aug 02, 2013 2:43 pm
Forum: RouterBOARD hardware
Topic: RouterBoard 912UAG-2HPnD and Atheros AR9380-based miniPCI-e
Replies: 21
Views: 5146

Re: RouterBoard 912UAG-2HPnD and Atheros AR9380-based miniPC

Normis said: Challenge accepted!

O_O! and TCP?
by Ibersystems
Thu Aug 01, 2013 7:01 pm
Forum: RouterBOARD hardware
Topic: RouterBoard 912UAG-2HPnD and Atheros AR9380-based miniPCI-e
Replies: 21
Views: 5146

Re: RouterBoard 912UAG-2HPnD and Atheros AR9380-based miniPC

RB433AH gives 203Mbps UDP or 95 TCP using 2 chain.
RB800 has 210 Mbps UDP or 190 TCP using 2 chain...

IF YOU GET 300 MBPS with 912.....:

http://1.bp.blogspot.com/-BYt6Ky5pG4c/T ... 00x600.jpg
by Ibersystems
Thu Aug 01, 2013 9:25 am
Forum: Wireless Networking
Topic: Connection List question(RB435G)
Replies: 6
Views: 1156

Re: Connection List question(RB435G)

I don't have it. Sorry but we are not scripting pros..
by Ibersystems
Wed Jul 31, 2013 6:53 pm
Forum: Wireless Networking
Topic: Connection List question(RB435G)
Replies: 6
Views: 1156

Re: Connection List question(RB435G)

NOTE: If the car is moving fast, you need to have 2 antennas in client, connected to 2 different APs. I don't know how to make it! Scripts for do the other stuff: -Kick when less than 4000 P-throughput /system script add name=chequear-throughput policy=\ ftp,reboot,read,write,policy,test,winbox,snif...
by Ibersystems
Wed Jul 31, 2013 6:49 pm
Forum: Wireless Networking
Topic: Connection List question(RB435G)
Replies: 6
Views: 1156

Re: Connection List question(RB435G)

Nope.

Make a script in the APs that kickoff your users when they have low CCQ or low throughtput.


If your client is kicked, it will try to reconnect to best signal AP, that will be one of next APs.
by Ibersystems
Wed Jul 31, 2013 5:35 pm
Forum: Wireless Networking
Topic: Connection List question(RB435G)
Replies: 6
Views: 1156

Re: Connection List question(RB435G)

Hi,


this is not for that.

This limit is to avoid connections grom -X to -x dbm.. BUT if you are connected and your signal drops, you wont be kicked out. This parameter is only read when you try to connect.
by Ibersystems
Wed Jul 31, 2013 5:27 pm
Forum: General
Topic: feature request: Carrier-grade NAT (CGN)
Replies: 1
Views: 1157

Re: feature request: Carrier-grade NAT (CGN)

Hi!

+1, but send it to support@mikrotik.com
by Ibersystems
Wed Jul 31, 2013 5:24 pm
Forum: General
Topic: CACTI help to monitor hotspot users
Replies: 3
Views: 1590

CACTI help to monitor hotspot users

Hello! I need to graph users that access the internet via my hotspots. Now I have a graph of leases of the DHCP server. In the morning I make a reset of all the IPs, then I have a graph showing how my system is giving IP addresses during the day and the max number of IPs used. I need also monitor ho...
by Ibersystems
Fri Jul 26, 2013 8:32 am
Forum: General
Topic: Hotspot and Wireless range extender
Replies: 4
Views: 5040

Re: Hotspot and Wireless range extender

If I don't remember bad.... I use the trial login option for the hotspot and the trial-uptime is set to 1h/1s. This gives you 1h of access each second. Then, each second starts another trial.. Then its not working. Trial is something like: 1h/24h (I give you 1h of Internet each day). Look in ip/hots...
by Ibersystems
Wed Jun 19, 2013 3:43 pm
Forum: General
Topic: VLAN problems. Need advice or how to.
Replies: 1
Views: 444

VLAN problems. Need advice or how to.

Hello, I have a 450G with 2 VLAN in port ether3. Administration and wifi. Connected to ether3 we have a unmanaged switch. To this switch we connected a 411AR that has 2 virtual AP (wifi and administration, each one with the correct VLAN...) We have it working with different subnets and different WPA...
by Ibersystems
Sun Jun 09, 2013 5:18 pm
Forum: General
Topic: Problem with RB1100AHx2 not more than 24 Mbps
Replies: 3
Views: 814

Re: Problem with RB1100AHx2 not more than 24 Mbps

50/50 is ISP fiber to ether1 of core router. It arrives to fiber conversor and they give us via ethernet with one VLAN.
by Ibersystems
Sun Jun 09, 2013 3:14 pm
Forum: General
Topic: Problem with RB1100AHx2 not more than 24 Mbps
Replies: 3
Views: 814

Problem with RB1100AHx2 not more than 24 Mbps

Hello, I have a customer with 50/50 fiber connection. My core router is a 1100AHx2. the router has a rstp bridge with 2 links to a mountain, and there starts a network with 70 access points. All is routed and working fine. I have about 70/70 link between the end of the network and the core router.. ...
by Ibersystems
Mon May 20, 2013 11:11 am
Forum: RouterBOARD hardware
Topic: RB800 Operating temperature...
Replies: 11
Views: 1643

Re: RB800 Operating temperature...

-75 is too much. I need to use it in big freezers at -25. I think 433AH could work also.
by Ibersystems
Sun May 19, 2013 10:10 pm
Forum: RouterBOARD hardware
Topic: RB800 Operating temperature...
Replies: 11
Views: 1643

Re: RB800 Operating temperature...

-75 degree?!

Sure? Any project at very cold temperatures?

I have to make a project in fridges and freezers at very low temperatures.. I need examples please!
by Ibersystems
Fri May 03, 2013 2:46 pm
Forum: RouterBOARD hardware
Topic: 1100 AHx2 vs. Hx2
Replies: 3
Views: 3057

Re: 1100 AHx2 vs. Hx2

But... note that AHx2 only use 1,5GB of the 2GB installed... Then.. there is only 512 Mb of difference and hw encription.
by Ibersystems
Mon Apr 29, 2013 12:05 pm
Forum: Wireless Networking
Topic: 3x3 mimo and miniPCIe cards, building HP backhaul
Replies: 5
Views: 1320

Re: 3x3 mimo and miniPCIe cards, building HP backhaul

Cao! We have to talk of Chicago..! I will call you. Please, give a capirotazo to Nameryone!
by Ibersystems
Thu Apr 25, 2013 12:46 am
Forum: Beginner Basics
Topic: RB133C's v2.7 is older than v2.18?
Replies: 1
Views: 298

Re: RB133C's v2.7 is older than v2.18?

yes

.1
.2
.3
.4
.5
.6
.7
.8
.9
.10....
by Ibersystems
Mon Apr 22, 2013 8:48 pm
Forum: General
Topic: NOT TO DO. Weird instalations?
Replies: 380
Views: 235782

Re: NOT TO DO. Weird instalations?

:lol:
amazing pictures... Do you have a photo of the face of this people when they arrive to your tower? xDDDD

Perhaps this company is reading this.. because the type of equipment.. but man...! NOT TO DO! : P!
by Ibersystems
Mon Apr 22, 2013 10:46 am
Forum: General
Topic: If interim-update=0s
Replies: 7
Views: 1098

Re: If interim-update=0s

You use subnets or the same network : ?

I think you have to use diferent pools to avoid colision..
by Ibersystems
Sun Apr 21, 2013 2:14 pm
Forum: Wireless Networking
Topic: nstreme & nv2
Replies: 1
Views: 655

Re: nstreme & nv2

LOOK: https://www.google.es/#hl=es&sclient=psy-ab&q=example+configure+link+mikrotik+nstreme&oq=example+configure+link+mikrotik+ns&gs_l=hp.3.0.33i21.24968.25625.3.27496.2.2.0.0.0.0.115.228.0j2.2.0...0.0...1c.1.9.psy-ab.BhuMfMppEps&pbx=1&bav=on.2,or.r_cp.r_qf.&bvm=bv.45512109,d.d2k&fp=439b60b1220700ff...
by Ibersystems
Sun Apr 21, 2013 2:11 pm
Forum: General
Topic: Winbox in winbox
Replies: 1
Views: 403

Re: Winbox in winbox

Yes, you have to use ip/firewall/Nat to redirect a specific port to the internal APs. 1.- you have to be sure the internal SXTs have Internet (gateway) 2.- redirect a port in nat in the equipment with the public IP. Read http://wiki.mikrotik.com/wiki/Manual:IP/Firewall/NAT#Destination_NAT 3.- access...
by Ibersystems
Sun Apr 21, 2013 2:05 pm
Forum: General
Topic: Deployment Guideliness 400+ suscribers at tech conference
Replies: 4
Views: 827

Re: Deployment Guideliness 400+ suscribers at tech conferenc

Avoid ubiquity.

Use 433AH with 2.4GHz(n) and 5GHz(a). Use the minimum power possible. Use PCQ queues.
by Ibersystems
Sun Apr 21, 2013 2:03 pm
Forum: General
Topic: If interim-update=0s
Replies: 7
Views: 1098

Re: If interim-update=0s

100¿?! For how many users?
by Ibersystems
Sat Apr 20, 2013 10:44 am
Forum: General
Topic: If interim-update=0s
Replies: 7
Views: 1098

Re: If interim-update=0s

With 1 pppoe server? : /
by Ibersystems
Sat Apr 20, 2013 10:37 am
Forum: General
Topic: Routerboard RB450 problem
Replies: 3
Views: 590

Re: Routerboard RB450 problem

Make a RMA..
by Ibersystems
Fri Apr 19, 2013 11:01 pm
Forum: General
Topic: Hotspot issues with Apple Devices
Replies: 6
Views: 2445

Re: Hotspot issues with Apple Devices

I always use wifi.mycustomerwebsite.com..
by Ibersystems
Fri Apr 19, 2013 8:35 pm
Forum: Wireless Networking
Topic: 3x3 mimo and miniPCIe cards, building HP backhaul
Replies: 5
Views: 1320

Re: 3x3 mimo and miniPCIe cards, building HP backhaul

Un pescaíto frito para mi! :lol:
by Ibersystems
Fri Apr 19, 2013 8:02 pm
Forum: General
Topic: Hotspot issues with Apple Devices
Replies: 6
Views: 2445

Re: Hotspot issues with Apple Devices

Hi!

you are not alone : D!

We had problems like this in large events where we have tons of mobiles.. not in small networks..
by Ibersystems
Fri Apr 19, 2013 7:59 pm
Forum: Wireless Networking
Topic: 3x3 mimo and miniPCIe cards, building HP backhaul
Replies: 5
Views: 1320

Re: 3x3 mimo and miniPCIe cards, building HP backhaul

Hola Rudy! I think JP4 is 5.5Volts in RB800. Fan Connectors You can connect up to four fans to the RouterBOARD, but only one pair of them will work at a time. They will receive either 3.3V or 5.5V DC power. The board supports fan speed feedback signaling. RouterOS can be configured to change the act...
by Ibersystems
Fri Apr 19, 2013 7:55 pm
Forum: General
Topic: Routerboard RB450 problem
Replies: 3
Views: 590

Re: Routerboard RB450 problem

Hi,

if you disconnect the board its impossible that you hear any sound.. :lol:

It's possible that you have something connected in ether1 giving PoE to the board and a diferent power supply in the jack? If it's like this, make sure the 2 power inputs are different: 12V and 18V for example.
by Ibersystems
Fri Apr 19, 2013 7:53 pm
Forum: General
Topic: If interim-update=0s
Replies: 7
Views: 1098

Re: If interim-update=0s

Sure.

Why you try to use things non usable? :lol:
by Ibersystems
Fri Apr 19, 2013 7:50 pm
Forum: General
Topic: 220Mbps of traffic in a disconnected ethernet O_O
Replies: 1
Views: 430

220Mbps of traffic in a disconnected ethernet O_O

http://screencast.com/t/NKNuBJYNT

I opened a ticket..

Anyone of you have seen this before?
by Ibersystems
Thu Apr 18, 2013 12:51 pm
Forum: General
Topic: Redundant link between Mikrotik bridge devices - RSTP?
Replies: 10
Views: 12385

Re: Redundant link between Mikrotik bridge devices - RSTP?

Hello, I have 2 offices with 20 machines in each office. We had diferent ip range in the 2 offices.. We had the ospf setup with 2 rb450 (one in each office) and 2 WDS links with 411AH. Now the customer wants to use the same ip range in both offices. We reconfigured the network and we activated a bri...
  • 1
  • 2
  • 3
  • 4
  • 5
  • 34