MikroTik

gmsmstr

I thank you again for the answer. I understand what you are saying. The provider says that have done Muli-link PPPoE with other customers, so I guess I need another router in front of my MT box?

gmsmstr

Thanks a bunch, figured it was in there somewhere! MT needs a better serach engine for their manual.

gmsmstr

Is there a feature like StarOS's Tarpiting?

gmsmstr

anyone? bump

gmsmstr

I looked around, did'ent find an exact answer, but..

How would you go about, MT with 3 NICS, each NIC in a VDSL modem, and then running three PPPoE Clients to the ISP. The ISP supports PPPoE MultiLink.

So, how do I tell MT to BOND all three of these?

Dennis

gmsmstr

Just wonderig, I have a DIVA ISDN card, it is installed, but where do I put the SPIDS in for my ISDN Line? Or will it just pick it up from the carrier?

gmsmstr

I have two cable lines, and I have several networks behind my cable lines. Each cable line has a /27 of IPs. 99% of my customers DO NOT have static IPs on my network. However, some do. I want my customers who DO NOT have static IPs to go out the NAT port (currently working), plus I want them to load...

gmsmstr

Good points, however, in the 2.9 manual, it mentions that you can do these ad items, however, it never says "HOW" to display ads every so often.

Can you give me a direction on that?

gmsmstr

How do I make it so that only port 80 and 443 can be used though my hotspot?

gmsmstr

Any luck with this?

gmsmstr

" Redirect is similar to the regular destination NAT in the same way as masquerade is similar to the source NAT - masquerade is a special form of source NAT without need to specify to-addresses - outgoing interface address is used automatically. " Does the above statement from the 2.9 manu...

gmsmstr

Just wondering on the graphing, most of my MTs are RB532s with 64 meg of HD space. I have 25 meg free, what is the max value with storage for 100+ queues and interfaces? Just making sure that I don't fill the thing!

Dnenis

gmsmstr

I have some 2.8 routers I need to update inplace. I am not worried about the queues, just need to keep the IPs so that I can get back to them, have to do the upgrade remotly. I want to put 2.9 on them, but it shows not to use the routeros-86 package to upgrade, what do I use then? Keep in mind, all ...

gmsmstr

I figured that one out from the WISP forum. Kinda stinks, something with the address 4 ??? stupid on their part I guess!

gmsmstr

I have a SB APPO about 8 miles out, no issues with RSSI and LQ, under site survey it shows 89% RSSI and 90& LQ. When it tries to assoicate, it says check auth and wep settings, can't assoicate. My AP is a 400mw B/G card running in B only mode, on a RB532, this is the only known issue since we up...

gmsmstr

I have this:

0 chain=prerouting src-address=10.0.1.0/24 protocol=tcp tcp-mss=0-1500
action=passthrough

The 10.0.1.x network is PPPoE network, 10.0.0.x is wireless?

Anything else i need to do?

Dennis

gmsmstr

I have about 40 clients off of my MT box. I have a single T1. The layout is this: internet T1 router -- > eTHER1 on MT --> Ehter3 on MT --> Wireless Radios on Tower I use PPPoE and Statics. I have a customer that PPPoE's in local (no wireless) and has NO speed issues, however, on another one, connec...

gmsmstr

You stink! Did'ent know about the application data thing! but soon as I did that it worked!

yeppy

Big Thanx!

gmsmstr

When I click on queues, it crashes!

Winbox.exe has encounted a problem.

Dennis

gmsmstr

MT ended up e-mailing me a link to a 2.9 RB netinstall package, a new version of Netinstall. It was just for me, so they have removed it.

So. If your net install is not working, e-mail mt and they will shoot you the proper netinstlal file.

gmsmstr

Issue with that, I don't know the RB admin password now! IT has changed! :(

gmsmstr

i hvae a RB 532, want to put on 2.9 beta 19. Has beta 16 on it. Plug cable into desktop, and directly into ETHER1 on RB Run NETinstall setup boot server for 10.0.0.1 Workstation is XP Pro SP2 without firewall enabled, IP is 10.0.0.2 The MAC never shows up on the device list, can console into the RB....

gmsmstr

Just more info. I have netinstall and the 2.9 bata 18 package I set the RB 532 to BOOTP and Boot over ethernet, and nadda? The wrokstation is Windows XP SP2, firewall disabled, no domain, swtich is a linksys 5 porter with nothign else on it. The IP of the workstation is 192.168.2.90, and the client ...

gmsmstr

OK.. I can't get the 531 to boot from bootp. I have the router installer, netinstall program running? IS there something that I need to do? I have cnofigured a client IP and turned on the netbooting?

Dennis

gmsmstr

k. Created the file, and sent it to them. This happened yesterday morning so I don't know if they will get the error or not in the file.

Dennis

gmsmstr

How do you do the support file?

I rebooted the unit and it is all working now, but it should'ent have happened.

Dennis

gmsmstr

I have a 1gig MT box that has been having some issues lately. First, some people can't VPN into the thing. I would have to restart it to get it to allow PPTP connections. Now, the thing will not let L2TP or PPTP traffic at all. but it is bridging 4 interfaces and they are all working, I.E. traffic c...

gmsmstr

IT helps, I will have to look in the documentation more!

gmsmstr

I currently have both a DSL and a T1 coming into my location. Here is what I have setup currenlty. Everything besides port 80 and 443 requests are going though the DSL. VoIP and my L2TP traffic is running over the T1. I need a script to monitor my next hop on both the T1 and the DSL. If the DSL goes...

gmsmstr

I have a location with a T1 and a 1meg DSL Line. I want to send the web, port 80 and 443 traffic though the DSL and the L2TP traffic along with UDP 10000-20000 though the T1 back to the main office?

Any suggestions on that!

gmsmstr

I want to be able to havfe customers hit a page, we see what IP they are from, and they get displayed there current monthly usage. It don't have to be up to the second, but up to the day.

gmsmstr

I have been using PPPoE, and assign customers IPs and then in there profiles they have the speed limit. HOwever, it does not have the bursting abilities. Would I have to setup a mangle rule for traffic to there IP, and then setup a queue with bursting? I also want them to bust to 1meg but then after...

gmsmstr

YOu can't bridge L2TP interfaces.

Dennis

gmsmstr

Ok. I changed the IP from .211 to .212 and it pings. Whats up with this? If I change my server IP back to 211, it stops pinging the MT?

Dennis

gmsmstr

I have a MT 2.8 router running with a L2TP connction to another MT box. It runs a private class C behind it. THe problem is that all my workstations are working to the internet and to my servers on the other side of hte L2TP, but my sever down there can't even ping the IPs of the MT box, its on the ...

gmsmstr

I have two L2TP connections, both have the local IP of the host router as 192.168.100.1. One connection is 192.168.100.2 and one is 192.168.100.3.

Both connections work great to the main network, but how do I get both L2TP connections to talk.

gmsmstr

ALL Right. To post on my own learning experices, I am going to go over the short and skimly of L2TP for anyone who may have trouble. The IMAGE in the 2.8 MT documents showing the IP tunnel and the IPs assoicated with it is the key. First, you have two networks. 192.168.1.x and 192.168.11.x (this is ...

gmsmstr

Ok. Server side IP 192.168.1.205 Client IP is PPPoE. I get my L2TP connection just fine. I set the secert for the right username and password, the remote IP is 192.168.1.207 and the local is 192.168.1.205. I can now ping the 205 box accross the conneciton. I added 192.168.11.x to my Cisco 2600 that ...

gmsmstr

I must be close. I decided to use L2TP cause of its ease of use. The problem I am having now, is that i see my pIng packets go out the interface for my L2TP connection, but on the server side, I never get a reply.

gmsmstr

Shoot me a PM, or Yahoo IM or post some config.

gmsmstr

I was thinking of just trying to pass a L2TP connection or a IPIP connection though my PIX515, and drop it at my 2.8 MT box I use at my main office. Might be faster/better and more stable. Plus, I am going to have multiple connections down at my remote office. The PIX won't allow the same IPSEC to c...

gmsmstr

I am receving ISAKMP packet from my PIX 515 , then it says phase 1, idenity protetion

gmsmstr

I have two routers. One is a MT 2.8 and the other is a Cisco PIX 515. I had a PIX 501 in at my remote office, with the IP of 192.168.7.x, but I have now put in a MT to allow QoS on IP phones and such. The problem is I have setup the peer, and the proposal, but they both have exclmation points in the...

gmsmstr

Someone has to have an answer!

gmsmstr

What I am wishing to do is to have my MT box do my resdential gateway for my DSL. That works fine. Plug in a MASQ rule and PPPoE Client and bam, i'm out. The next step, is to have a PPTP connection to my work, and there private network, 192.168.x.x. My private network now is 10.0.0.x, so it should w...

gmsmstr

Did you figure out this?

Search found 946 matches

Tarpiting?

Multi-Link Client PPPoE

ISDN Spids

Loadbalancing + static IP customers

Block Hotspot Users

two public networks/1 interface NATquestion

How much space does graphing take?

Upgrade 2.8.1 to 2.9 via net

RC4 + SB APPO Client Issues

2.9 beta 19 DNS and speed issues on RB 532

Winbox Crashes when click on Queues.

BootP with netinstall and RB 532 not working

Routerboard 532, can't get to netboot for upgrade

Mikrotik crash but still passing some data?

Default routes for Protocols

T1 and DSL needing to have certian packets to each

Not replying to pings??

Multiple L2TP connections

HELP NEW IP SEC COnnection

PPTP Client, and Gateway