MikroTik

xezen

i get this on pppoe wont connect setup modem(bridgedout)------mikrotik-------pc trying to let mikrotik dial out but it wont get this err if i bridge out the pc and set it up it works what could be the problems pppoe is as follows 1 name="Telkom" max-mtu=1480 max-mru=1480 mrru=disabled inte...

xezen

sorry for got to post link

http://isc.incidents.org/reports.html#top10source

how can i read this list and add the to firewall rules

xezen

how can i read the ips off here and add to firewall to block ip please help

xezen

thanks mikrotik team i cant wait the get hold of them as i will make good use of it
maybe next will be a 19 or 20dbi sector type device.

as right now i use rb800 or 433ah with ubuquity sector dual for my setups with a bit of modification

it works well

xezen

that would be cool any updates on this?

xezen

hmmm reading reading reading

xezen

where is he download
for
V4.14

xezen

voltage is right now thanks team

xezen

i need some one to help clean up my server/gateway and setup up a squid proxy

anyone willing to do this
ill pay if i must as i tryed many setups and still have problems

xezen

can some one help please how can i do this by sript add burst-limit=0/0 burst-threshold=0/0 burst-time=0s/0s comment="" \ direction=both disabled=no dst-address=0.0.0.0/0 interface=Local \ limit-at=100k/300k max-limit=100k/300k name=ZW0025 parent=Local priority=\ 8 queue=default-small/defa...

xezen

i would like to set up diffrent users admin1 admin2 admin3 admin4 all addmins have diffrent firewalls so i want to set up te dude server like this admin1===logs in via port 3000 admin2===logs in via port 5000 admin3===logs in via port 3100 admin4===logs in via port 5030 admin5===logs in via port 306...

xezen

please could you post config and what the distance between both point as signal -37

xezen

I THOUGHT IT WA FREE BUT I SEE NOW About Google Maps API The Maps API is a free service, available for any web site that is free to consumers. Please see the terms of service for more information. Businesses that charge fees for access, track assets or build internal applications must use Google Map...

xezen

thanks alot that was exactly what i need to fix my problem

xezen

any one

xezen

what i have is gateway------mikrotik x86------------------conections----------cpe--------server when i try connect from internal to that address it times out from outside it tells me its correct but cant see port 80 cpe gets it connection from x86 it get the ip 10.0.18.2 cpe wireless interface=10.0....

xezen

RouterOS on RouterBOARD 433
Health monitor
This menu shows the current input voltage and fan status.
[admin@MikroTik] > system health print
fan-mode: manual
use-fan: main
active-fan: main
voltage: 18.8
[admin@MikroTik] >

this is only on the 433ah correct what boards
support voltage readings?

xezen

COULD IT GO ON THE LIST TO ADD IT TO THE NEXT VERSION OF THE DUDE

xezen

can the dude use google map api as a background pic?

xezen

is it possable to set all dude server to log on one central server

so the a rb with the the dude on it will not use local disk space to store its information

it must sent it to a local server

can this be done

xezen

does it support 5GHz-turbo

with nv2

as i have 433ah with 3 radios

5ghz
5GHZ-turbo
2.4g-only

i want to try it with the 2.4g-only but not shore if it will affect the 5ghz-turbo

xezen

is the snmp odi for gps been set in this version?

In RouterOS v5.0beta6 the will be SNMP support for GPS.

xezen

torrents worked for me

xezen

nice cant wait

xezen

any idea on v5.0beta 6 will be avalable?

xezen

what anttens dual pol or two single ones

xezen

looks like he is out to just make money and a living

xezen

so its just 1 chain or 2

xezen

thanks

xezen

please post script with full config

xezen

so the 1000 is much better?

xezen

cpu dont support it how do i know if its supported?

xezen

why the cost diffrence MT-RB1000 MikroTik RouterBoard 1000 - 512MB, 4 100/1000Mbps LAN & L6 License, Desktop 5,588.70 MT-RB1100U MikroTik RouterBoard 1100 - 512MB, 13 1000Mbps LAN Ports & L6 License, 1U Rackmount Case 4,386.00 if i look at thing the 1100u is better then why the 1000 more the...

xezen

i get this when i add in charts
new charts od i works but get unknow type

xezen

so whats all in now?

xezen

all ok on x86 but tourch dont chow port just dst and src address

xezen

Relay Inputs/Outputs

well example relay

on solar so if the solar pannel get stole relay opens and send output to mikrotik and mikrotik smses me pannel is gone

on there uses and put door switch on relay and when door is open mikrotik emails me door is open

and many more uses

xezen

on the dude i added charts works but keep getting error when adding 4 diffrent ons unknown type

xezen

anyone

xezen

i paste all values [admin@PPPTP] > system health print oid active-fan: .1.3.6.1.4.1.14988.1.1.3.9.0 voltage: .1.3.6.1.4.1.14988.1.1.3.8.0 temperature: .1.3.6.1.4.1.14988.1.1.3.10.0 [admin@PPPTP] > but error or value stays 0 .1.3.6.1.4.1.14988.1.1.3.9.0 .1.3.6.1.4.1.14988.1.1.3.8.0 .1.3.6.1.4.1.14988...

xezen

digital inputs maybe

xezen

+ relays

xezen

thanks

xezen

set watchdog-timer=no

xezen

on most boards bug in 4.10

even rb411 has it

xezen

can anyone help me add an oid to the dude to monitor system health or just tell me were to add this in please

xezen

where do you pu he oid in the dude to create a graph of it

for example the temp of 450g

is .1.3.6.1.4.1.14988.1.1.3.10.0

what do i do then

xezen

can anyone help i have lOS 3km

26dbi grids both sides
433ah on both sides and n radios
i have connected one chain0

xezen

what setting do i use on n cards if i use chain as i cant seem to get ccq up i played with tx powe as on defualt i get -20

for 3km link please help with a basic setup that works with 20-30 mb that i can play with

xezen

ill try it now ill report back

xezen

found a bug in this version

or maybe a tying error

rb411

xezen

then i must change client side to static psuedobridge for it to work

xezen

explan to help understand

example

dhcp-server-------------rb433uah(1) (cable) rb433uah(2)
rb 433uah(2)

has 3 wireless ports 3 ap

ap1 ap2 ap3

using Eoip wont i have to bridge ap1 ap2 ap3

xezen

i dont want to do it on copper i want to do it on wireless and i dont want to use wds setup thats why i asked ill read up more and see what i want to do thanks for the help

xezen

ok i found my problem thanks

now next question
is it possable to do this with out bridge

xezen

can we log into the sqlite3 database in any way? i normaly use firefox plugin to do this

xezen

SORRY HERE /ip dhcp-server add address-pool=dhcp_pool1 authoritative=after-2sec-delay bootp-support=\ static disabled=no interface=7 lease-time=3d name=dhcp1 add address-pool=dhcp_pool3 authoritative=after-2sec-delay bootp-support=\ static disabled=no interface=Local lease-time=3d name=dhcp2 /ip dhc...

xezen

client
/ip dhcp-client
add add-default-route=yes default-route-distance=0 disabled=no interface=\
wlan1 use-peer-dns=yes use-peer-ntp=yes
dhcp relay
/ip dhcp-relay
add delay-threshold=none dhcp-server=23.0.0.1 disabled=no interface=wlan3 \
local-address=0.0.0.0 name=relay1

xezen

did that but nothing will it work with /8

xezen

so what was a solution to this? use linux box for dns server????

xezen

how would i do that isnt it just the address of the dhcp server example 10.0.0.1 with dhcp pool of 10.0.0.0/8

xezen

but the end one dont get any requests for dhcp

xezen

can i set up a dhcp relay to do this server(dhcp)---mikrotik(a)---mikrotik(b)---wireless(c)---wilreless(d)---mikrotik(e)---client 23.0.0.1/24 i have a ospr outing if i set up dhcp-client on client side and a dhcprelay on mikrotik(e) i get the requests bit no resons from server mut i set up a relay o...

xezen

Make sure you are running the latest MikroTik RouterOS version, contact support (support@mikrotik.com) with the attached support output file.

as you can see what was asked for

xezen

i have the same thing on 4.9

ill upgrade to 4.10 and send file to support

xezen

upgrade its free

xezen

i have the same problem on 4.9

on a 535 board

and 433ah

i upgraded the 535 to v 5.2 beta and problem seemed to stop its been running fro 13 hours now no problems

but ping when from 1ms to 2-5ms

but its stable

xezen

well it should ospf tell me that the rouse to 192.168.2.0/24 goes to that interface net1-----mik(eth)-cable--ubiquity(briged)net---net2 net1 is all osf routing! and mik(eth)has static dhcpclient set up eth gets its address ospf routes it the route gets placed on the table and can ping the address th...

xezen

PHY ERRor did you get it fixed as i have 6 boards doing it wireless works but not ethernet

looks like hardwer broblem on ethernet poe port has popped

i got this from using poe

now i just use direct power via jack

xezen

i have tow networks network1-mikrotik ospf network(address added)---ethernet cable----ubiqity bridged-network2 on mikrotik i hve dhcp clint to gain address from bridgenetwork2 works fine but i can ping the hole network from the mikrotik and not from behind the mikrotik but if i look at ospf my hole ...

xezen

so far so good thnks but would like to here other comments like pptp firewall pppoe ospf etc thanks for the info

xezen

what is this link doing with new router os

and the uptime on of this link

and the config if possable

xezen

how to set up proxy

i need help to set up proxy on x86 with 2 eth ports

if both borts are in a bridge how can i set up trance parrent proxy

with this setup

as i cant get it to work

please help

xezen

so what do people say about ros 3.9

so far i found it works for me with no problems i would like to upgrade my whole network

even the rb133c ad i di the labtest and it works fine not as fast as 2.9 was but it works

thay will be replace soo anyway

so what do other people say about v4.9 ros

xezen

souns right

xezen

thanks i see sow now thanks

xezen

if i relay it to proxy http times out

dstnat port 80 to 8080

xezen

so if i had this set up on a ip camera where do i connect vlc to ip camera or router board

ip(multicast option)---411ah(multicast installed)wireless------------433ah(multicast installed)----pc with vlc

xezen

i have

x(modem)adsl range 196.231.53.118/29---[196.231.53.112/29]eth0(450g)eth1[10.0.0.1/30]---[10.0.0.2/30]eth0(433ah)

wlan1[20.0.0.1/30]-------[20.0.0.2/30]wlan1(rb800)eth1[196.231.53.113/29]
i have ospf set up hove can i get this routing correct thats in red please help

xezen

trance parent proxy over a bridge (the settings i posted are for the proxy bridge)where im having problem

xezen

doing simple test but works on rb532 will be testing other models 2day to make shore all is correct to what im saying

xezen

it it possable to trigger output on any router board dont need fan output to make this work simple and easy who wants to know ill post on the wiki when done

xezen

what is the channel section on seial port as i cant get gps to work on 4.9

xezen

i have network proxy in bridge---------adsl modem where am i going wrong please help /interface bridge add admin-mac=00:00:00:00:00:00 ageing-time=5m arp=enabled auto-mac=yes \ comment="" disabled=no forward-delay=15s l2mtu=1600 max-message-age=20s \ mtu=1500 name=bridge1 priority=0x8000 p...

xezen

that would be something

get a mikrotik hard cover manual

of say 600-800 pages

dot you think the wiki manual would be easyer to work with?

xezen

is webfig in v4.9 or only beta?

xezen

or even ssd drives would be nice o add in

xezen

WAS THIS ADDED TO WIKI?

xezen

is there any place were i can download the video as i have low bandwith and cant stream so good

avi or mp4? or something like that your videos are a grate help helps with small detailed problems

xezen

thats realy cool

xezen

100% is possable by the way just takes lots of playing around with everything

xezen

what will be a good cheap type modem

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

xezen

well it would be nice if mikrotik could control everything dialupas and all

xezen

does mikrotik think thay will ever add this option to x86 or routerboard?

xezen

does mikrotik support rj11 jack to dial up a pppoe over a telephone line over x86?

xezen

can i use it for pptp links?

xezen

thanks

xezen

is there any windows drivers or windows 7 xp or vista?

xezen

will post a link to the forum as soon as it is done

next question can i add a pic to proxy wepage .error.html

i eddited and place the image in same folder but it dont display

xezen

im busy putting up my own webpage and want to link it to mikrotik forum wiki and home page but i want to use the winbox icon the small blue icon.is that legal or must i contact support for more information

xezen

if it cant find host the scrip stops not much o a bug but it there thats why i sed it works

xezen

it can be done but has bugs here is a link

http://wiki.mikrotik.com/wiki/Use_host_ ... wall_rules

but does work well

xezen

have problem in version 4.6

error comes up

lost connection,not polled for to long

using xr5 nstream and and rb433ah

xezen

does mikrotik team thay might add more options to ups in next releases?

xezen

i would also like a salution to tthis

xezen

thanks i found a salution to my problem

xezen

i have sata1 and sata2

in x86 can i disply disk 2 with system graphs

on web inteface

xezen

i can see that so there must be a salution correct

or has it been fixed

can i redirect https through the proxy yes or no????

xezen

can it work on windows mobile phones?

xezen

so how can i work around this network--------x86----eth1---adslmodem1 ----eth2----adslmodem ----eth3----mailserver ----eth4----x86proxy----------adslmodem so i have a nat to redirect 80 trafic to proxy but i want 445 trafic to go throught the same modem as proxy traffic

xezen

sory about that i didnt see that only afre the post a did add him to get hold of him personly thats for he support

xezen

that was fast?

thanks for the reply

can it right into an oracle data base

i got delphi 2010?

so it will read that

xezen

i need Chupaka help with delphi i know its off topic but i need a way to read from a tcp connection so i conect to xxx.xxx.xxx:5000 and save everyline it reads into a acsess databasec can you help me please the line will look like this http://www.gpsinformation.org/dale/nmea.htm $GPAPB,A,A,0.10,R,N,...

xezen

thanks for this inforamtion hekps alot

xezen

what radios you using?

and whta antennas you got set up? with this config

can you post your configeration here for up please

xezen

as he sed something like this

change the script to soute

xezen

me to please also need this information

xezen

and i know on the r52n

j4 was like aux

xezen

http://www.routerboard.com/pricelist.php?showProduct=94

it is a mmcx connector know as the inner connection

in south africa

but here is a pic on the card and tail

http://thewifishop.net/images/uploads/m ... nector.JPG

xezen

whats the reason for no proxy setup are your lines fast enuff or what as i have problems with my type setup

5 adsl lines 1mb/4mb lines
and a proxy always pic up problems

and cant seem to get a work around on it

as a proxy will help me a lot as i dont have speed to work with

xezen

thanks
do you use it like that?

xezen

when yoo use btest do you test udp or tcp

?

xezen

what models are you looking for

you SA you are in sa what part of SA?

xezen

?????anything on the last post

xezen

that wont work make a cable in the manual it shows you how to make one gives you all the pin outs

xezen

cpu usage

can mikrotik help us with this a 411 what type of throughput can we do before cpu usage?

xezen

ok thant explanes my Problem

so i must add somthing like this

chain=srcnat action=masquerade protocol=!ospf out-interface=internal-BtoI

xezen

with ospf routing do i enable masquerade rule as im moving off a bridge type setup?

i have got the ip addresse sorted out already on the interfaces jus nee to know about this rule

xezen

so if its possable can you do a pc to pc test through your link

as i think this is your problem

so test it

pc------A-------B-------C-------pc
test it pc to pc and let us know

xezen

1)get all borad on the same version 2 how are you testing the bandwith as you have this right 411(A)------------433(B)------------411(C) so you testee this A-B and B-C 50mb and thast doing tests from B right try test like this pc--411(A)-------------433(B)------------411(C)----pc do bandwith test fr...

xezen

A to B = 50 km bandwidth test tcp both = 25mbits tx/rx

dont you mean

A to c = 50 km bandwidth test tcp both = 25mbits tx/rx

give us more info on hardware and power supplied to each connetion]

ifo on boards radios os version and do a
/system routerboard print

and give use that information also

xezen

thats a good reason why not

xezen

good work do you have anything on mikrotik and squid as i see that there is lots of info on your webpage

xezen

frying and freezing routers in 2010. Xezen i would suggest you to shield your box from direct sunlight, so box does not get that hot, i do not think that there are many affordable high power devices around that would survive that without additional help, like shading the box, forced ventilation etc...

xezen

thanks would be great

any new ideas for 2010

xezen

and with the test what is the max temp for this board as the temps inside my steel boxes go up to about 54C 60C

xezen

i cant ger registed to the wiki to add this to supported hardwer

but the verbatim microsdhc 8gb class 4 works with the rb433AH rb450

xezen

so is the a diffrence in 4.3 and 4.4

is 4.4. more stable

and can you tel me more about hardwere?

xezen

what version of os are you running?

xezen

marry XMAS to all and a happy new year srom southa africa

xezen

it can also be bad signal and ccq on the client side

that also brings down all clients connected to the same ap

xezen

maybe the UM will come out later
and it might be stable then

xezen

thanks for the reply

xezen

normis posted this

user manager beta-test package is not yet released

xezen

in v 4.3 i didnt have an option for kvm

but 4.4 i have the option how do i know if its supported now

as im not shore what cpu i have in my pc

xezen

please send us a link to download test UM thanks for the support

xezen

does anyone know if any new changes or bug fixes to the usermanager?

xezen

what is the diffrence between ospf and ospfv3?

can anyone help me with this information

xezen

thanks this works well

xezen

good work

xezen

so all is working now or not?

xezen

i have xen installed but when i do this

/kvm nothing

is this right how do i install or enable kvm
must i remove xen

i have x86

xezen

I DID SOME TEST WITH OMINS AND FOUND THAT I BLOW RADIOS WITH THE 12DBI THEN I CHANED THE OMINS WITH A 9 DBI AAND PROBLEM SLOVERD

FOUND THAT SOME MAKES OF 12 DBI OMNIS HAVE STATICK PROBLEMS

xezen

i cant get ospf working

xezen

question i have this ____=cable connection -----=wirless connections server eth0(x.x.x.x/29)____adslmodem1 eth1(y.y.y.y/29)____adslmodem1 eth2(w.w.w.w/29)____adslmodem1 eth3 eth4(a.a.a.1)__433ah(eth1)(wlan1)(a.a.2.a)------433ah(wlan1)(wlan2)(a.a.3.a)-------411(wlan1)(eth1)(b.b.b.1) can amy one help ...

xezen

i have a routerboard that saves a test file every second now i need to know how can i move it to a remote board or ftpserver from the board as the board takes time to read all files if the server conects to the board takes to long to do this as i must read all file first server--------wireless -----...

xezen

where or what is this supperchannels?

xezen

quesition lets say i do a remter serail connection ro read data ok so what i waht to do is say pc-----mikrotikap ----mikrotik client----serialgps so i create a remote to ip address on client gps but if wireless is lost i can log data can i get mikrotik to create a text file so i can download it via ...

xezen

what rule can i use to send all traffic of 443(ssl) and http throught 1 adsl modem

but i dont want any port 80 and 443 on the local trafic to get reruted?
please help

xezen

3 didnt work well at all but thats why the test as i have 6 boards on 4.3 and 6 on 2.9

same thing exept the heat in th boxes

im going to monitor this a bit more

see what i can find you should try 4.3 works well

xezen

i have a a gsp connected to console and on the routerboard i set remoter accesson a port to connect to the serial example gps-----serail on routerboard-------wireless on the routerboard i set a remote to seial connection so i get this x.x.x.x:5000 in internet explore if i type in x.x.x.x:5000 it sho...

xezen

what os version you running on?

me 4.3

xezen

yes direct connection to board

xezen

but thats my tests now i wanted to know cant mikrotik brake up the packeges on the 133 and 133c even more

like
wol will have its own package

pptp vpn

pppoe

dhcp server
dhcp client
etc.........

as this will help alot with the new verisons

xezen

i have been doing some tests on the 133c and 133 routerboard due to the 100% cpu usage and found somthing intrusting i found that if its in a smallerbox and running 12v the box getts hot and the cpu goes up to avarage 100% then i used a bigger box with 12v and cpu goes to avarage 80% but comes down ...

xezen

im new to api and codeing and looking for advice i think php would work for me what i am trying to get is read the gps connected to the serial port of a mikrotik so i will have a gsp connected to serial and my api will read it! put i cant seem to get the gps data up can some one point me to the line...

xezen

well there are ways to do it but on the softwer side there is reads it wia serail

so can only view 1

im still looking for a ip salution to this that can log this to a database iv asked for api on the gps or link to the dude but nothing yet

xezen

dont you mean 3.30 to 4.3????

xezen

I have seen a huge amount of posts on the forum relating to the "slagging off of N mode" But has anyone actually got any useful experiences of using 80211n in an Urbanistic type environment, eg AP's mounted on street lights down a narrow street, where N might benefit from reflections, Rat...

xezen

when will refman4.0.pdf will be avalable

or upgrade documentation will be avalable

http://wiki.mikrotik.com/wiki/Category:Manual

oh sorry didnt see that 1 thanks

xezen

when will refman4.0.pdf will be avalable

or upgrade documentation will be avalable

xezen

can you post a script to add this into a mikrotik or a rsc

xezen

i need a script to add a range of ips to my address list smtp-allow

range is 192.168.80.1-192.168.80.254

xezen

any one else use meissner we use it in south africa

for 220v and 3 phase and gets used for banks hospitals and so on

xezen

no dont look like it

xezen

rb800 is almost out and looks like a nice board but i dindi see any sd card options

but the board looks good now we need somthing smaller

411AHG would rock

xezen

is there anyone that can help me with cacti over skype?

please contact me

skype name:

meerholz.brendan

xezen

or even a 433UAHG would rock

xezen

thanks for the help all working now

xezen

were that as i just know of

sudo vi /etc/php5/apache2/php.ini

xezen

yes all services restarted
restarted the ubuntu server just to make 100% sore and thats right but still get error it changes in size everytime

xezen

but i have edited that thats why i came hers as this is router os with cacti thats what i need in mp php.ini file max_execution_time = 30 ; Maximum execution time of each script, in seconds max_input_time = 60 ; Maximum amount of time each script may spend parsing request data ;max_input_nesting_lev...

xezen

i get this error on cacti 0.8.7e

when i import the file

Fatal error: Allowed memory size of 16777216 bytes exhausted (tried to allocate 115 bytes) in /usr/share/cacti/site/lib/xml.php on line 32

any idea how to fix this

xezen

is there a diffrence in a briged network and a routed network

with about 100 cpes?

tolal of 150 pc users?

will it be more viable to go with ospf?

xezen

does squid have somthing in this line also?

xezen

mybe in south africa!!!!!!!!!!!!!!!!!1

xezen

dpnt have web proxy have to many problems with it

xezen

can any help me with a connection rate for port 80 as i have tryed to slow down p2p and add in a line just for banking sights but wiht time all p2p connects throught port 80 and kinlls my banking line can anyone help me with this please just to add a que for heavy 80 and normal 80 heavy is p2p norma...

xezen

able to log all data on a mysql or oracle datatbase directly

and be able to view lon,lat,time/date, and speed value of the gps via smnp

and be able to log it into the database

xezen

can we read the long and lat values via smnp in any way?

with date time and speed?

xezen

i get an error when i import the templets can anyone tell me why

Error: XML: Hash version does not exist.

i have cacti 0.78b if im 100% right please help

xezen

what you can do is set up 2 proxys and route examples from 10.0.0.0/24 port 80 can go to 192.168.1.1:8080 and from 10.0.1.0/24 port80 can go to 192.168.1.2:8080 so everthing that goes to and from 192.168.1.1 go through wan1 so everthing that goes to and from 192.168.1.2 go through wan2 thats the eas...

xezen

well it can becouse you have more options

wit can be done with 2 proxy setups to keep it like that but we are waiting for mikrotik to make some type of sync connection for proxys so whats on 1 proxy will be on the other

xezen

get a licance and upgrade to 3.30

xezen

make suport.rif before it reeze and when its frozzen and sed to support

xezen

and what if you set utorrents port to port 80?

and not randoum on startup?

xezen

no problems like i say it wont kill nobody if tou ask a question

xezen

i dont get this are you asking for ways to test to bypass firewall or testing how good your firewall rules are?

as there are many ways to bypass firewall with p2p?

are you using utorrent to download?

as i have some tricks you can try out

xezen

/ip service enable winbox

you can use serial cable to do same thing

if you blocked port 22 also

xezen

thanks for the link

Search found 628 matches