Community discussions

MikroTik App

Search found 169 matches

by kujo
Tue Jul 12, 2016 6:55 pm
Forum: General
Topic: VLAN tagging question
Replies: 7
Views: 1861

VLAN tagging question

Hi, set IP conf on vlan interface!
/interface vlan
add name=vlan-wan12 vlan-id=12 interface=sfp1
/ip address 1.1.1.12 interface=vlan-wan12


Have a good day!
by kujo
Thu Jun 30, 2016 7:52 am
Forum: General
Topic: (Higher) Bandwidth Speeds
Replies: 1
Views: 887

Re: (Higher) Bandwidth Speeds

/queue simple add name=speed-test target=eth1-wan max-limit=50M/50M


Have a good day!
by kujo
Thu Jun 30, 2016 12:13 am
Forum: General
Topic: QoS for VoIP question
Replies: 1
Views: 790

Re: QoS for VoIP question

Need your config export! Mangle, queue, connection map)) You need after connection-mark, mark the packets for use in queue. Simple queue can work without packet mark.


Have a good day!
by kujo
Tue Jun 28, 2016 4:44 pm
Forum: General
Topic: IPSec Issue
Replies: 10
Views: 1948

Re: IPSec Issue

I removed the source address to verify nothing changed. Any other suggestions? Check the are action accept or masquerade? Insert before /ip firewall filter add action=drop chain=forward comment="defconf:  drop all from WAN not DSTNATed" connection-nat-state=!dstnat connection-state=new di...
by kujo
Tue Jun 28, 2016 4:29 pm
Forum: General
Topic: Routing rules and queue tree
Replies: 0
Views: 1139

Routing rules and queue tree

Hello! On CCR1009-8G-1S-1S+, v6.34.6, have a config: /ip address add address=1.1.1.209/29 interface="eth1-ISP1" network=1.1.1.208 comment="ISP1 29 block, first IP" add address=1.1.1.210/29 interface="eth1-ISP1" network=1.1.1.208 comment="ISP1 29 block, second IP&qu...
by kujo
Mon Jun 27, 2016 10:36 pm
Forum: General
Topic: IPSec Issue
Replies: 10
Views: 1948

Re: IPSec Issue

Try to bypass nat for remote net
/ip firewall nat chain=srcnat dst-address=192.168.3.0/24 action=accept place-before=0

Have a good day!
by kujo
Sat Jun 25, 2016 4:04 pm
Forum: General
Topic: Poor (ridiculously) performance on two CCR1072
Replies: 54
Views: 13107

Re: Poor (ridiculously) performance on two CCR1072

Hi, any news??


Have a good day!
by kujo
Thu Jun 23, 2016 11:28 pm
Forum: General
Topic: Forward trafic to pc ccproxy
Replies: 2
Views: 1288

Re: Forward trafic to pc ccproxy

Buy additional router. Add ipsec tunnel on miktotik in net 10.10.10.1<-->mikrotic in net 192.168.0.0. Add ipsec rule, peer, proposal. Web site routing must know where net 10.10.10.0


Have a good day!
by kujo
Thu Jun 23, 2016 11:05 pm
Forum: General
Topic: OpenVPN client problems
Replies: 4
Views: 1886

Re: OpenVPN client problems

Change location of cert and keys


Have a good day!
by kujo
Thu Jun 23, 2016 10:57 pm
Forum: General
Topic: CCR1036 PPPoE server bad performances
Replies: 10
Views: 4193

Re: CCR1036 PPPoE server bad performances

Sorry men, not success! Storm star again, 1-2 times per hour...


Have a good day!
by kujo
Wed Jun 22, 2016 9:43 pm
Forum: General
Topic: CCR1036 PPPoE server bad performances
Replies: 10
Views: 4193

Re: CCR1036 PPPoE server bad performances

Hi all,
I think is a cpu issue, though it isn't at 100%. I don't understand why.
Is it a software limit or a hardware limit? 
Hi! Set auto negotiation of interface with pppoe to 100Mb/s only mode.
Remove all jump rules from mangle.
I'am have success !


Have a good day!
by kujo
Mon Jun 20, 2016 12:34 am
Forum: Beginner Basics
Topic: Jump seems not to capture all packets it should
Replies: 2
Views: 1178

Re: Jump seems not to capture all packets it should

Hm! How you route traffic across WAN's ? Also use jump rule on WAN pppoe client, and have a very poor performance on upload speed. I check tomorrow is that all packets catch.


Have a good day!
by kujo
Sun Jun 19, 2016 11:50 pm
Forum: Beginner Basics
Topic: CCR1009 PPPoE hardware offloading ?
Replies: 3
Views: 3592

Re: CCR1009 PPPoE hardware offloading ?

Hi! You have some performance in upload speed of pppoe connection?


Have a good day!
by kujo
Sun Jun 19, 2016 11:21 pm
Forum: General
Topic: CCR1036 PPPoE server bad performances
Replies: 10
Views: 4193

Re: CCR1036 PPPoE server bad performances

Some problem on one 100mbit/s pppoe connection! Like a storm. Random time to start jitter, few minutes and stop. In "storm" pppoe upload down to 2mbit/s. Have two WAN and one bonding LAN(of two ports). three ipsec connections (aes128, 3des,des) . Slow performance on aes128 chiper and only ...
by kujo
Sun Jun 19, 2016 2:52 pm
Forum: General
Topic: PPPoe fast download, slow upload
Replies: 13
Views: 6674

Re: PPPoe fast download, slow upload

Some problem with CCR1009, slow upload speed. how you resolv this trabl? Have a progress, put gigabit interface(wan1 through optic converter) in 100MB/full mode, and upload speed up to near 87Mb/s. I'am connect to router through second wan, and after pppoe client start connect, ccr-1009 slow down a...
by kujo
Sun Jun 19, 2016 12:49 pm
Forum: General
Topic: IPsec Dead Peer Detection Best Practice
Replies: 7
Views: 13124

Re: IPsec Dead Peer Detection Best Practice

How about your performance on Ipsec channel? What model of central router you use?


Sent from my iPhone using Tapatalk
by kujo
Sun Jun 19, 2016 10:30 am
Forum: General
Topic: IPSec between two CCR1036 poor performance
Replies: 17
Views: 5573

Re: IPSec between two CCR1036 poor performance

Any progress in this problem? Have few ipsec tunnels on ccr1009 up to date, some poor performance:(


Sent from my iPhone using Tapatalk
by kujo
Sat Jun 18, 2016 11:24 am
Forum: General
Topic: PPPoe fast download, slow upload
Replies: 13
Views: 6674

Re: PPPoe fast download, slow upload

Some problem with CCR1009, slow upload speed.
how you resolv this trabl?