MikroTik

krafg

For Mikrotik LTE modems: https://wiki.mikrotik.com/wiki/Manual:I ... _Cell_lock
For others: I not know.

Regards.

krafg

Hello, I want to know how to configure all the sim card slots of my LtAP LTE device kit, it has three sim card slots. I only have active a one slot, that it is the second slot. It doesn't let me activate the other two slots, it tells me that "only APN can be local!" And I do not understan...

krafg

Already did that. SIM cards are all active and work fine in slot 2 and 3. I checked the routerboard resources and it only recognizes one modem. On the interface section only LTE1 appears. The only thing I didn't mention (an important one by the way...I'm sorry for that) is that I disconnected the o...

krafg

Teorically, yes, but be careful with RBGESP: viewtopic.php?f=3&t=160612&sid=4a8d0d1a ... bef78feb2e

Regards.

krafg

I found a SFP+ ONT on a stick optic:

https://www.aliexpress.com/item/4001075949216.html

Haven't actually bought one and tried it. But it is an example of something you could use with an SFP+ uplink port.

But, it needs be compatible with MikroTik devices and with different OLT's.

Regards.

krafg

Using Windows and DNS of Google I never had problems loading MikroTik sites. I always use Firefox on Windows and Android.

Regards.

krafg

Inclusive GPON was descontinued, so, celular technologies are the only "WAN" Mikrotik products that you can find.

No xDSL
No Docsis
No GPON
No Vsat

Regards.

krafg

krafg

*) lte - fixed modem initialization when multiple modems are used simultaneously;

Updated RBM33G, LtAP LTE kit, BaseBox 2, BaseBox 5 and PowerBox Pro without issues.

R11e-LTE-US works well on both devices.

Regards.

krafg

That bad.

Thanks for reporting!

Regards.

krafg

List here.

Regards.

krafg

So, you need an enterprise router that comes with all that you need. Your requirements most probably are not compatible with "home line" devices.

If RB3011 have all your hardware requirement, choose it, or better choose some CCR for other requirements on the future.

Regards.

krafg

I can't recommend any omnidirectional antenna for LTE/cellular. I never used someone before. For Wi-Fi you can use BaseBox + UBNT AirMAX Omni antenna. Works very well. For LTE I know a 65° sector antenna. (L-COM HG72710XP-065) And for conectorized device I recommend LtAP. You can add to it some pigt...

krafg

Or try with hEX (880 Mhz)

Regards.

krafg

This post is for if you have some troubles with this device. Enable GPS: System -> Ports -> Serial1 -> Baud Rate = 115200 /system serial-terminal port=serial1 channel=0 MiniPCI-e or USB modem: (Default: USB-type-A) /system routerboard usb set type=mini-PCIe /system routerboard usb set type=USB-type-...

krafg

*) lte - fixed modem initialization when multiple modems are used simultaneously;

Updated RBM33G and LtAP LTE kit successfully.

R11e-LTE-US keeps working well after update.

Regards.

krafg

In my case , with better RSRP I can get a lot better upload speed instead download speed but is true that also is improved (for example with -115 dBm I can get 15/1 Mbps and with -95 dBm I can get 25/25 Mbps).

Regards.

krafg

Try with 1480 bytes of MTU.

Regards.

krafg

If you try PoE off on all ports, also have packet loss?

Regards.

krafg

If you forget your device password, you will need reset to default and re-configure it.

Regards.

krafg

Ok, so apparently is a bug of ROS. I suggest to you contacting directly with Mikrotik Support opening a new case. Explain the problem and the solution to fix the problem. So, is probably to on next version of ROS, it will be fixed. I suggest that send rif files after and before workaround. As additi...

krafg

You check this?

https://wiki.mikrotik.com/wiki/MikroTik ... lity_table

Regards.

krafg

What is the size of the MTU of your LTE interface?

Regards.

krafg

For big houses, reach 80Mbps with only one AP on all areas, I think that is not possible. You need a excellent coverage on 5Ghz to reach these speeds. The best option that I know for indoors is cAP AC, but most probably you will need more than one. I know that cAP AC can reach more than 100Mbps only...

krafg

No problems with ROS 6.47 and ROS 6.48b7.

I'm using WinBox 3.24 (64 Bits) on Windows 10 2004.

Regards.

krafg

Thank you, for your informative answers. Then I don't understand logic behind netmetal+HGO, considering the fact HGO antenna is marketed as direct-attach outdoor antenna, and then you need to remove the top lid from netmetal to screw it on, thus lowering its weatherproof resistance. I am in talks w...

krafg

Good morning y'll, at least it is in California. Well it is actually raining hard. I have been testing MikroTik LHG R with R11e-LTE-US for two weeks now and have been reading these forums for about that long as well. As well as Reddit.com/r/mikrotik. Has anyone been able to update the R11e-LTE-US f...

krafg

For licensing contact directly to Mikrotik support.

Regards.

krafg

RMA. I had a LtAP LTE kit with a broken SIM port also, but the difference is that the broken thing was the SIM port, not SIM cards.

Regards.

krafg

If you drag and drop the file to "files" tab (Not inside "files" window) and you got the same error. Must do Netinstall.

Regards.

krafg

I have locked myself out of firewall, messing around firewall rules ....
And I do not have backup either

You can't access using Winbox via Mac address?

Regards.

krafg

HGO antenna OUT is to attach directly to this NetMetal. You can't use Flex-guide cable for these little antennas. Pigtails are designed for big outdoor antennas (Mikrotik dish, UBNT, Altelix, L-COM, Jirous, Radiowaves, etc.).

Regards.

krafg

I also have Woobm but it not have completely the same features that regular adapters/cables.

I tested it on a BaseBox and routerboot never appears. In summary is exactly the same as I connect though SSH/Telnet or open terminal on Winbox.

What do you exactly need?

Regards.

krafg

To connect to console, first, the router must have a console port.

Cables: USB to DB9: Trendnet TU-S9
DB9 to DB9: TrippLite P450-006
DB9 to RJ45: Cisco 72-3383-01

Not use generic cables/adapters, may cause problems.

Regards.

krafg

For antenna, any that works with 2,4 and 5 Ghz at same time. Altelix have some alternatives: https://altelix.com/antennas/2-4-5-ghz-antennas/ The cable, any that works until 6Ghz. It depends of you antenna choose. If you choose is N connector on the antenna, use TP-Link ANT200PT. Works well. If you ...

krafg

I have a PowerBox Pro and all my devices are powered by Passive PoE. I connect 2 PC's and the negotiation is a bit slower than a regular MikroTik switch because it checks PoE function first. PoE is very simple, work or not work, it never will try to force incorrect powering to a device. This technol...

krafg

cAP AC is a little device, but very powerfull!

I never used wAP.

Regards.

krafg

I know that S+RJ10 not have internal firmware to work. Revision (In this case) means hardware version (Not software).

Regards.

krafg

In my opinion, I think that is better to work with high frequencies, but no too much signal strength, I get better results (More speed). If I get excellent link between my device and the cell tower, but 100 - 200kbps speed because the cell tower have poor throughput capacity or cell tower is saturat...

krafg

Sorry I forgot completely do the tests. I see that your old turris is MIMO 3x3 (an advantage from MIMO 2x2 of hAP mini). Most probably if you disable Turris wifi and use only on Mikrotik, You Will get better results because you will get less interference, but anyway hAP capabilities will be limited....

krafg

You can do a script that restart your LTE interface when connection is lost.

If you believe that it is a bug, I suggest to contact directly with MikroTik support sending RIF file.

Regards.

krafg

https://wiki.mikrotik.com/wiki/Manual:I ... _Cell_lock

krafg

This means hEX PoE normally works only with the 24V adapter? So this is hardware bug?

It should works using 48v power supply, but alone (without your cameras).

Regards.

krafg

I think that is not possible. Only you can buy an outdoor box and put inside your RB912.

Regards.

krafg

First disconnect a bit your cameras and power up your AP alone. If fails with 48v, try with 24v.

Most probably if all works OK, you are overloading with your cameras your hEX PoE.

Regards.

krafg

I use my LtAP with external antennas (2x L-COM HG72710XP-065).

Regards.

krafg

Try to power up using 24v original power supply.

Regards.

krafg

RMA?

Regards.

krafg

Switch + wAP is only a option. LtAP and LtAP mini also comes with Wi-Fi integrated. Also exists the RBM33G that comes with 3x Gigabit Ethernet (With this you can remove the switch) and 2x miniPCIe slots (one for LTE and the another for Wi-Fi for example). Also you can replace the common switch for a...

krafg

Can you test with a power supply at 18v @ 2A (or more Amps)?
And with 12v @ 3A (or more Amps)?

Regards.

krafg

The first is the R11e-LTE6 interface of your LHG. The second is Chateau LTE12 router. https://i.imgur.com/JQU7Exm.png The image is right? LHG LTE6 kit: 1 and 3 is supported but 2, no. EARFCN 1700 – Band 3 (20MHz bandwidth @ 1855MHz (DL) - 1760MHz (UL)) EARFCN 1275 – Band 3 (15MHz bandwidth @ 1812.5M...

krafg

Both cables (S+DA0001) are OK, right?

Regards.

krafg

Here is a unit working, but I can't see blinking leds on disconnected ports. If you believe that the leds are not working correctly, try to upgrade to last ROS version with his firmware and if still the problem persisting, contact to MikroTik support to know if is a ROS bug or your unit is defectiv...

krafg

I ended up disconnecting the hEX and used a hAP AC2 instead so I unfortunately can't check that. I don't believe the hAP AC2 powered on from the cable but now I am wondering if perhaps I missed it. I can't say for certain that the other end of the link was 802.3af compliant, the previous device whi...

krafg

I have 2x RB450G from 2015 still alive. I was lucky?

Regards.

krafg

Hello, This is my first post. Nice to meet you. I have a wAP LR9 kit, which I am very happy with. I am experimenting with LoRaWAN, and I will be deploying this hardware at a remote location soon. According to the documentation the maximum power consumption is 7W, however, I'd like to know what the ...

krafg

You need to ask to your distributors if some day they will have available your requested models.

If the answer is a "no", so you can buy MikroTik devices on Ebay. Apparently there are some trustworthy users selling.

See it here.

Regards.

krafg

Any SFP transceivers which complies to SFP MSA will work on the CRS112-8G-4S-IN. Take a look!

Thanks a lot for this information! I was lucky to choose PowerBox Pro + S-RJ01 without see this before.

Regards.

krafg

I assume that a device that are compatible with a specified band, it is compatible with all EARFCN of that band.

Regards.

krafg

Summary: Voltage: 18v (Real range: 19.4v to 18.6v) Total current consumption: 1,1A When: 1,1A(Total) @ 18,6v (Overload detected on lowest PoE priority) Right? I prefer the values in Watts to have a better idea. I also have a PowerBox pro, but I use 24v and a max current of 200 - 210mA per port (I ne...

krafg

okay.. as some user in forum saying that it have interface bug ? has it solved? i am from india and i plan to purchase it as sim operator run its LTE network in 1800 mhz,2300 mhz.

Make sure if the LTE band (Not frequency) of your operator is compatible with this device.

Regards.

krafg

Is possible. On last (not published) version of ROS 6 was solved an issue that makes that R11e-LTE-US not runs with R11e-LTE (International). Both interfaces I get running on RBM33G and LtAP (not mini). In addition you can configure Failover or Load Balancing or both. https://i.imgur.com/dwQOOnp.png...

krafg

I attach a schema. I'm not sure if I understand your requirement.

Regards.

krafg

That sadly news.

Thanks for sharing.

Regards.

krafg

Show what LEDs you can control under Systems -> LEDs

I attach an example of my LtAP.

Regards

krafg

With default configuration how is the speed link?

Regards.

krafg

Tomorrow I'm going to do tests with this (I have one unit) and I will posts the results.

Regards.

krafg

Also try to set 1g only on you Mac.

Anyway is weird that the auto-negociation can't do it at 1G.

As addition, is interesting to know if the same thing occurs with another RouterBOARD.

Regards.

krafg

You checked that the 8 pins of your cable are OK? If your cable is made on the fabric, anyway test it.

Regards.

krafg

Unfortunately - my device is not under warranty anymore so RMA is not an option for me. As I stated before - I've moved the card to slot 2, so we'll see if it helps. So bad news :(. Probably it is the 4th broken SIM card port posted here. It is worrying. :( Good luck with your second SIM port! Rega...

krafg

Try with different channels and make sure that the channel width is set to 40Mhz.

Regards.

krafg

That a Mikrotik device looses SIM card connection it's NOT normal. Scripting probably can help to re-enable the connection but it not should why occur that. If the device have this strange behavior, simply RMA.

Regards.

krafg

Hello, Thanks for your response. I probably need to make myself more clear. I am looking for an adequate WiFi coverage to cover area of around 500m2 (a town square). I am not looking to amplify/extend 4G/LTE signal. Therefore, ideally I'd need a 4g modem + high gain omnidirectional wifi antenna com...

krafg

RMA. I changed LtAP with defective SIM card port. A couple of time also lost Internet connection by the same reason until SIM port ended to dead.

Regards.

krafg

mANT 19 S is not for LTE
Instead wAP, LtAP is better for external antennas.
SXT and LHG I never used it, but I suppose that LHG can connects with longer distances than SXT.

Regards.

krafg

RMA.

Regards.

krafg

He's comparing between the R11e-LTE-US and the R11e-LTE6. The former (which he says has a higher speed) does not have CA support. I understand, but I assumed that his LTE6 module is operating with CA (both carriers at same time). I explained that almost for me, when I use CA the throughput is a lot...

krafg

If the device is still with warrantee, change it for a new one.

Regards.

krafg

What RouterBOARD are you using?

Regards.

krafg

I no have experience with LTE6 module and I'm not from USA, but I know that everytime that my smartphone do the carrier agreggation (CA) displayed "4G+", my Internet connection is terrible (is better 3G on most cases). Now how my phone is rooted, I locked the band selection and only it con...

krafg

So downgrade to an older version until it will be fixed.

Regards.

krafg

Apparently all new hardware not comes more with buzzer (beep sound).

Regards.

krafg

Second broken SIM port that I see.

About it, I suppose that is a common standard size SIM port.

You have 2 options: A) Solder a new one B) Buy a new LTE MikroTik device.

Regards.

krafg

WOW. It looks great! Probably the best cellular antenna at the moment for Mikrotik devices. My dream is exactly that Mikrotik sells this! But is great that also we can meke this antenna. Thanks for sharing. Regards. I think you should check this one new product... https://forum.mikrotik.com/viewtop...

krafg

I agree it is interesting, it works better too even if you ignore better numbers. I will open that mANT antenna sometime as I wonder if if has the same elements as the WAP ac LTE6, I did notice that this has a new LTE antenna design over the original WAP LTE mANT + LHG XL = DIY antenna - heve got t...

krafg

Yes, to LTE module attach 2x ACSMAULF. On back side of hAP, you can do the holes for the connectors.

Regards.

krafg

Thank Krafg, that makes sense but it's what I had. does make an improvement to signal quality Installed on my inland waterway boat https://lh3.googleusercontent.com/pw/ACtC-3dU4bsFVSAwoQSTuBaD5q9TlHuT8FuLGh8cO6HgfQJ3k0S2JCHHzQK4yf4VID664ySx6UN6aQnjy389rXRYHCPxu1P5ZPz2Ix2qIvJqgO2qvVkVLYpI6sbkdNqXINf...

krafg

any one guide mein how to create a post in this forum and i want to know i have RB4011IGS model Mikrotik i want to use LTE interface i mean i want to use sms service for mikrotik is there any way because in this model there is no usb port kindly guide I sent you a PM saying that you need specific h...

krafg

Check server connections using GlassWire on Windows.

Regards.

krafg

Disable all virtual interfaces from your computer and enter using Winbox though MAC.

Regards.

krafg

/interface lte at-chat lte1 input="AT+reset"
/interface lte at-chat lte1 input="AT+RSTSET"

Try it.

Regards.

krafg

Sent PM.

Regards.

krafg

Updated 2x BaseBox2, 1x BaseBox5, 1x PowerBox Pro and 1x LtAP LTE kit without issues.

On LtAP CPU usage downs from 11 - 12% to 0 - 1% that are normal values. Fixed wireless. OK!

Antenna gain only available on my BaseBoxes (in my case). OK! (to me).

Regards.

krafg

Add an LtAP mini with SIM card + some compatible LTE/UMTS pcie card with Mikrotik and your ISP to these RouterBOARD.

Regards.

krafg

System -> Packages -> Check installation.

Try to do a Netinstall.

Most probably you can't recover your config.

Regards.

krafg

On all routerboards 6.46.6 it shows as testing.

Try to do a Netinstall and delete default configuration.

Regards.

krafg

Is this interesting, but LtAP probably is better to use with external antennas.

Regards.

krafg

Cat 6 isn't for more than 1Gbps, you need Cat 6A shielded cable for more speed.

Regards.

krafg

I optimize a bit the code. Advantages: *Code runs only when is necessary. Now it not runs everytime. *Fix more faster. *Only writes 82 sectors since reboot. Before every 2 minutes 2 sectors are written. Log: https://i.imgur.com/pIhj4Jm.png Sectors: https://i.imgur.com/9nmA9Mt.png Code: https://i.img...

krafg

Remove the jumper near of USB port.

Regards

krafg

Looks great!

Regards.

krafg

Thanks for response. I'm going to try it. About SIM slots, now ALL are working. Changing the unit solved the problem. About the running of LTE-US interface, keeps without running (As I thought). Edit: I connected to a remote computer on other network. I put MY public address on the page and this is ...

krafg

Ok, today I'm going to get the new unit. Some questions: 1. The ping with non-fragment option I do it on the Mikrotik's console to any public IP? 2. The packet sniffer that you say is the Torch of LTE interface? 3. On second post you say that check some LTE parameters. Which? 4. I not know how to ge...

krafg

If you read a bit, DC-HSPA+ needs category 21 to 24 to work. These categories are part of R8 category. R11-LTE6 support R8 category, it is on brochure PDF. The question is if Mikrotik modules support the complete R8 category. Exists the possibility that yes, but I'm not sure. Now if is not specified...

krafg

In older posts I see that PowerBox Pro have the same processor that RB2011 and probably can be affected.

I use PowerBox Pro since ROS 6.40, then upgraded to 6.45, then 6.46 and now 6.46.6 and I never had problems.

It's a little fact.

Regards.

krafg

For SwOS don't worry. Always you can use RouterOS for switching and routing and is compatible with x86 platforms. SwOS I believe that can not be virtualized on Windows/Mac machines.

Regards.

krafg

Hello SiB: I can write to you on Telegram, but I send the device to RMA and I changed it for a new unit. I'm waiting to get it. For now I'm surviving with my old RBM33G. I can see that the problem with the invalid IP also occurs with it on same ROS version. I suppose that it is another problem and I...

krafg

The good: Many models to choose. Works with more technologies that the competition. The software, I love it, because is extremely flexible. On mayor of cases, the hardware is the only limitation. Support is good and you have this add-on (the community). RouterOS runs on x86 platforms natively. You c...

krafg

Yes. Long time ago I read about it. I bought a S-RJ01 and works great on my PowerBox Pro.

One time I believe that I saw that one guy installed heat sinks inside of the module for the same reason. I'm not sure.

Regards.

krafg

Update: I re installed LtAP and both SIM are recognized, but only one is running (The main SIM). https://i.imgur.com/tMH1BGA.jpg https://i.imgur.com/L2jsUPB.jpg https://i.imgur.com/KcZyBsT.jpg Edit: After a reboot. LTE2 keeps running but LTE1 no, with same effect on IP addresses. Then, I disabled LT...

krafg

Someone has speed tested the throughput of NetMetal ac2 using WiFi with some meters of distance?

Any feedback is appreciated.

Thanks and regards.

krafg

Probably with the most directional antenna the device can't do the carrier aggregation and the performance is lower. Why? Because most probably both towers are much separated. With a smaller antenna you have much more angle to receive signals from different towers and get the carrier aggregation (CA...

krafg

Update RouterOS and check that your APN profile is OK.

Regards.

krafg

My Mikrotik latest modem firmware list: R11e-lte6 v025 (31.03.2020) R11e-lte MikroTik_CP_2.160.000_v015 R11e-lte-4g v9 R11e-lte-us v16.02.183961 SXT LTE 3-7 |-> chip:2.0 fw:0.1.2.4 https://wiki.mikrotik.com/wiki/Manual:Interface/LTE#Modem_firmware_upgrade but the R11e-LTE and R11e-LTE-US must be up...

krafg

Update: I found this command: /system routerboard modem set sim-slot=2 I changed sim-slot=2 to sim-slot=3 and now the third SIM port RECOGNIZES a SIM inserted. Source: https://help.mikrotik.com/docs/display/RKB/LtAP+%3A+SIM+not+inserted Thanks for this tip. Probably this can works for me. Tomorrow I...

krafg

Today my port sim port stopped working simply by changing SIM card. I have a LtAP LTE kit and I can't believe that the SIM port deads. Now with coronavirus is impossible to buy another device or repair with the reseller. Modems are with the last firmware. I have as LTE1 a R11e-LTE and as LTE2 a R11e...

krafg

Very surprising to me that launches another indoor LTE device. The most incredible is that all indoors are more expensive that the outdoors models.

Regards.

krafg

Probably RB3011 can't reach 1Gbps but RB4011 should do it.

Regards.

krafg

Quality of cable is very important. Make sure that you are using only well known brands of cable (Leviton, AMP, Belden, Siemon, Panduit, etc). As possible use cat.6 instead cat.5e and make sure with a cable tester that the 8 pins are making contact with the connectors. Also remember that both device...

krafg

Sometimes the basestation that your device connects have bad thoughput for many clients connected or simply the trunk of the basestation have low thoughput (if the connection is though VDSL or MMOO normally this happens). Check if with your cellphone you have the same results that using MikroTik. Ma...

krafg

I hope that this new version works better and stay more stable. Waiting for announcements.

Regards.

krafg

No way to do it.

Regards.

krafg

Only you need to remove the jumper on the board, from USB, to pass the energy to the second miniPCIe port and you will show both interfaces on WinBox.

Regards.

krafg

Pros: The best quality/price on routing market, switching and wireless. The most flexible solution on routing, switching and wireless of the market. Great support in general. RouterOS very powerful and supports including obsolete devices the last version (except one very very old board I believe). S...

krafg

Untitled.txt]I really miss a second ethernet port on the RBM11G, one for LAN and one for failover to wan from wwan. Next step is much larger routerboards with more ports than i need, dual lte modems and larger in size overall. Does anyone know if there is a model that i missed or comming up with th...

krafg

WAP AC LTE kit.

Regards.

krafg

Check My signature.

Regards.

krafg

cAP AC is cheaper and you can get enough throughput. Now if the problem is not the price/costs you can choose Audience.

Regards.

krafg

Check your antenna direction, if is correct.

Anyway is very hard get Internet access over 2G on these days.

Regards.

krafg

The best is call to your ISP and inform that in these "zone", the Internet is not working or is terribly slow to what a technician check the tower. I did it one time and in one day the problem was solved.

Regards.

krafg

VDS? Are you installed it on virtual machine or real machine? VMware? Configurations? Export? Topology? Interfaces configured on your PC?

Regards.

krafg

You tried using 3G instead 4G?

Regards.

krafg

How is your signal levels with the second operator? Remember that SXT have a directional antenna and is probably that with the second operator works better the built-in antenna or your smartphone that the SXT antenna. Anyway, if you want a backup link, I recommend using one device that supports 2 mi...

krafg

It's a server?

Regards.

krafg

On ethernet interfaces, you can't change MAC addresses, only wireless.

Regards.

krafg

Try to download manually the package and move into files of Winbox. Make sure that you move it outside the folder "flash" to load it into RAM memory. Then reboot and see if works.

Regards.

krafg

Disable all your interfaces (physical and virtual) of your PC and only enable Ethernet. See if Winbox can see by neighbors your routerboard.

Regards.

krafg

Please post here your export (Open terminal and type "export hide-sensitive") and tell us what is your download/upload speed difference.

Regards.

krafg

What do you mean with "gw"?

krafg

On power supplies the electrical current (A) it says the quantity that it can supply. It not says that it is the only that it can supply. Problems comes when you use a power supply with not enough electrical current (A) and/or with different voltage (v). Using DC connector, the camera needs 12v to p...

krafg

I'm not sure if it is a well known connector like u.fl, but you can try to connect a small antenna to it by some way and see if works. Probably works, it says that works with 2,4Ghz and 5Ghz antennas. The most probably recommended is atatch a dual band antenna to use both chains.

Regards.

krafg

*) lte - fixed modem not receiving IP configuration when roaming (introduced in v6.45);

Very interesting. I think that is the issue that I had:

download/file.php?id=38244

Regards.

krafg

A lot of years requesting the same. I think that is for something. Actually the only WAN technology that is supported by MikroTik is GSM/UMTS/HSPA/LTE (Wireless WAN technologies). Nothing with xDSL, GPON or DOCSIS (Wired WAN technologies). Yes, the most probable the reason is for price, but we reall...

krafg

AP-AC-PRO uses a PoE injector that is not common. I would never try to power it with a MikroTik device.

Regards.

krafg

The next level of 3011 is 4011, but if you want more power, next is 1100ahx4. Next, some CCR.

Regards.

krafg

Well, I hope that on newer versions of RouterBoards MikroTik considers it.

Regards.

krafg

OK. I have the final news. I not know that happened but today my R11e-LTE -US is running on my LtAP LTE kit for first time!!! I'm super super happy. For many days I disabled the interface and now I enabled to see what happens (if it finally connects [and I supposed that no]) but finally works!!! To ...

krafg

I know that the reason to discontinue the production of the GPON module is the costs. It's too hard for MikroTik to compete with other brands. Anyway if MikroTik needs launch this product more expensive that competitors, would be great for users that can have this option of GPON module. +1 for Mikro...

krafg

Is interesting the option to add a miniPCI slot or USB to connect a LTE card/modem but I'm agree with doneware with the option to buy another equipment and use the option of passthrough to get directly the ISP IP on the RB2011 or RB1100AHx4 or similar. With this option you can get a LTE device that ...

krafg

I also had problems with DHCP using ROS 6.42.x. I updated to 6.43 and the problem was solved.

Regards.

krafg

What ROS is running your CCR?

Regards.

krafg

Great, thanks for the information.

Regards.

krafg

18 Gbit/s, when in the web page says that it can pass until 80 Gbit/s. There is something weird. Can you post your export with hide-sensitive option?

Regards.

krafg

Great. How about the wifi configuration? It let configure SSID and PSK with AES only?

The Ethernet interface I believe that is fast Ethernet, in any case Gigabit. Right?

Thanks for share your first impressions with us.

Regards.

krafg

You say that is not enough for you, but you are not using 100% of the CPU. How much traffic are you passing in total?

krafg

As recommendation for you:

USB to Serial adapter: TRENDnet TU-S9
Serial Cable: TrippLite P450-006
Software: It is more like, but I love Xshell for Windows.

Regards.

krafg

Well, if it has 3 SIM card slots, the idea is can to use all his slots at the same time, but with this you can only use two, or is that I believed, because is impossible to get "running" on the interface. It connects "successfully" to the tower, over 3G or LTE (both works) but ne...

krafg

Are you sure that are you configured the APN correctly and then assigned to the interface?

Regards.

krafg

Hello normis.

All that I need is this command to see my interface on list:

/system routerboard usb set type=mini-PCIe

Now I see my two LTE interfaces!

Regards.

krafg

Hey man, I can't believe it!!! Finally my R11e-LTE-US interface appears on my interface list!!!

I never saw this command before! Very useful!!!

A lot of thanks Gerbaum!!!

krafg

I have a problem understanding how the bands work in different countries, so I'm not sure if it can be related for Russia.

Russia uses B3, B7 and B20 and with R11e-LTE (International), should work with every ISP while your signal quality and strength are good.

Regards.

krafg

As you can see, you have 2,8% of bad blocks. In my case I had 2,6%.

Regards.

krafg

Use the same SSID on all devices. It worked for me using 54 cAP AC.

Regards.

krafg

Probably is a problem with NAND memory. Check the bad blocks percentage on System -> Resources. Also check if installation is ok on System -> Packages I had this problem with a BaseBox 2 but it solves "magically" when I do a big update (6.42.5 to 6.44 with firmware included) I not know why...

krafg

Free.fr uses B3, B7 and B28. SXT LTE (first version) is compatible with B7, and the newest SXT LTE kit, is compatible with B3 and B7. You need to check that the nearest tower is not B28.

Regards.

krafg

The size of the antenna is not the unique thing that helps that the communication be better, a lot of factors impacts on this. Is well known that bigs antennas can get more gain. Obviously I say you that a bigger antenna can help you not only by it's size, also for his directionality. If you use a h...

krafg

If your AP is working like router, yes, blocking the respected ports on Firewall.

Regards.

krafg

You tried NetInstall?

Regards.

krafg

Probably your signal strength has increased, but your signal quality is poor that before and for this reason you have problems now with upload.

Check it.

Regards.

krafg

It is normal because the internal antenna is very little. You can't ask for more, the device is very tiny.

An external antenna can help you.

Regards.

krafg

Using switches from D-Link and LevelOne causes me this issue. I changed all for Cisco Small Business and works perfect the DHCP.

Regards.

krafg

Make sure that your ROS and firmware are updated and only use good quality cables.

Use latest Winbox version.

Regards.

krafg

Some news about the compatibility between R11e-LTE-US and LtAP LTE kit?

Regards.

krafg

Sorry, I not know if this is the correct theard to this, but I'm using the last release (v1.3.2) and I get this (see attached image)

Regards.

krafg

@SiB I see that when I change from LTE to 3G, the leds keeps on. With my code, leds turn off because RSRP value is not longer available and RSSI is the new parameter for signal. When I program the scheduler to run a script every 1 second, the sector writes increases every second. I not know why. An...

krafg

I put a delay of 40 seconds on scheduler and finally starts OK at boot up! Now I'm going to check the part of logs. Many thanks and regards. Edit: New code on scheduler: :global lte1 false /system leds set 1 leds=led1,led2,led3,led4,led5 type=off :while ($lte1=false) do={ do { :global interface1 [/i...

krafg

@SiB It's good idea separate log info on 2 sections, but I think that in my Syslog server anyway will shows all the logs duplicated. About executing the script every 1 second, I think that is better too, because I have problems with the startup of the script using on "Start Time" as "...

krafg

@Jotne Sorry for paste here the script without using tab. For the next time I will have it present. I have Notepad++ and I understand it that you mean. I copied so because I test the codes that I write on terminal an the tab makes that on the terminal shows the available commands to insert by way o...

krafg

I modified my code and now only modify the LED properties when only if necessary: { :global ledsafter 10 :global ledsbefore 20 :global runloop true :do { /interface lte info lte1 once do={ :global rsrp1 $"rsrp" :delay 100ms :if ($rsrp1 >= -80) do={ :global ledsbefore 5 :if ($ledsafter = $l...

krafg

Ok. Finally I runned your script and the results are in the screenshot_6 If I modify the script changing the comment symbol and run, the results are in the screenshoot_7 Your script not run on my routerboard. From this: #/interface lte info lte1 once do={:global RsrpLte1 $"RsrpLte1"}; # re...

krafg

The default state is all LEDs off except the power led. By default, LED section in Winbox is empty.

Regards.

krafg

I have a RBM33G and LtAP LTE kit and never had problems.

Regards.

krafg

During the process of NetInstall if you don't check the "keep configuration" option, is normal that the routerboard boots without configuration.

Regards.

krafg

Your "/system leds..." command not work. From where you receive it? You tested it? Screenshot_6.jpg If I disable the previous assignments made by me, I can use scripts in my LtAP. In my case, I no have problems with it. Later I will test again the code removing the comments character in t...

krafg

Sorry, I confussed. The script runs, but no has any effect (Or at least I can't see it).

I attach a screen capture.

I researched about logging, but I think that is not possible because these kind of action can favor malicious activity on routerboards.

Regards.

krafg

Your script not run on my routerboard.

Anyway now is working perfectly except because my log is full while it's running the script.

No way to "say" that not log when I change the led values?

Regards.

krafg

Now, I created a code but the log is crazy! { :global runloop true :do { /interface lte info lte1 once do={ :global rsrp1 $"rsrp" :delay 100ms :if ($rsrp1 >= -80) do={ /system leds set 1 leds=led1,led2,led3,led4,led5 type=on } else={ :if (($rsrp1 >= -90) && ($rsrp1 <= -81)) do={ /s...

krafg

For now I have this code: #Create "runLoop" variable :global runLoop true #Do the following: :do { #See the info of LTE interface /interface lte info lte1 once do={ #Capture RSRP value and save as "RSRP1" variable :global rsrp1 $"rsrp" #Prevents high CPU utilization :de...

krafg

Ok, I have news. Finally I found the way to capture the RSRP value and set it to a variable: /interface lte info lte1 once do={:global rsrp1 $"rsrp"}; LtAP has 5 leds for signal strengh that are led1,led2,led3,led4 and led5 respectivelly Now with the variable rsrp1 that is the signal stren...

krafg

It's extremely weird. On your PC on cmd put the following: nslookup 8.8.8.8 nslookup google.com nslookup mikrotik.com It's for finally discard if is a DNS problem. You say that if you ping to google.com on your routerboard, it works, and I assume that DNS servers are working on your routerboard and ...

krafg

Also here I tried to get the RSRP and then do something: https://forum.mikrotik.com/viewtopic.php?f=9&t=151036 But I can't get results. Anyway I also can help with some commands or scripting test. EDIT: Finally I can get the value and set it to a variable: interface lte info lte1 once do={:globa...

krafg

Try this: /ip dhcp-server network add address=192.168.88.0/24 dns-server=8.8.8.8,8.8.4.4 gateway=192.168.88.1 You have: /ip dhcp-server network add address=192.168.88.0/24 gateway=192.168.88.1 netmask=24 Then, disconnect your cable and connect again. I not think that is a compatibility problem becau...

krafg

Then, probably the problem is that you not have DNS servers on your DHCP. If you see the IP details of your interface of your PC probably the DNS are empty.

You can upload a screen capture of your PC interface details.

Regards.

krafg

You can ping on your PC to 8.8.8.8?

Regards.

krafg

Do you have DNS servers configured on your DHCP server?

Regards.

krafg

Anyway these temperatures are secure, but is curious so much difference between both temperatures.

Regards.

krafg

IP -> Firewall -> NAT

Add

Chain: srcnat
Out. Interface: lte1
Action: Masquerade (This on "action" tab)

Regards.

krafg

Masquerade the traffic in Firewall.

Regards.

krafg

Make sure that your psysical Ethernet interface is the only that is enabled.

Regards.

krafg

You can power up your unit using PoE inyector included. Your power supply with the PoE inyector can be inside your house. PowerBox Pro is designed for outdoor environments and not need an enclosure. I never used it to power on IP cameras but is possible that you need the 48v power supply. You have t...

Search found 1054 matches