MikroTik

need working passthrough on a SXT LTE (rOS 6.41.2 stable)

--> viewtopic.php?f=2&t=113562&p=644608#p644608

SXT LTE doesn't have pass-though support.

FOR ME 6.42rc24 (testing) WORK!!!

We will try to release v6.42 soon with all the changes.

For the WAP LTE that needs a user authentication there is a need for a LTE firmware upgrade to v008.
Please see the attachment how to do the LTE firmware upgrade. The LTE firmware upgrade can only be executed via active LTE connection as the LTE modem is connecting to the firmware server.

Nstreme-plus is almost the same Nstreme protocol but with some additional tweaks to get better compatibility with latest ARM based wireless chipset hardware that we started to release recently.

After upgrading from version 6.39.3 [BugFix] to 6.41.1 and then to 6.41.2, my device [RB751U-2HnD] presented wireless connectivity problems. I also upgraded the firmware, leaving it equivalent to the ROS. The causes of the problem could not be identified in the logs. Even after resetting and redoin...

please note that changing the nstreme settings will not effect the 802.11 wireless protocol performance. There is some other changes that could increase the speed. We haven't seen such problems you have. We have tested the map lite and it utilises the both chains. Did you try to point the map lite i...

*) wireless - fixed incompatibility with macOS clients; What problems exist with macOS clients? Which OS X versions are affected? ( I'm running 6.41 on all CAPs and have no issues being reported by OS X clients...) If you were setting priorities for the WMM then sometimes the macOS clients didn't a...

So its my understanding that the new hap ac has wave 2 support? Does that mean that the driver does as well? i.e. does it support all features of wave2 already or will that come at a later stage? Can the AP transmit to multiple clients on different spatial streams simultaneously? Currently we don't...

In the passthrough mode the interface doesn't work for local communication. But you can create a vlan interface on top of ether1 and connect to the router via that or connect via wireless interface. You can also try to enable the ROMON as that will work on the ether1 and then you can connect to the ...

Version 6.42rc5 has been released. : *) capsman - improved CAPsMAN responsiveness on systems with large amount of CAP interfaces; : How many CAP interfaces are we talking about? More than 100 CAPs. I setup a new controller (coming from the CHR release) with an RB1100AHX4 and put new CAPs (wAP AC, H...

maybe you could try to install a RotuerOS version on a USB stick and check if those USB devices are recognized in the RouterOS.

Version 6.42rc5 has been released.
:
*) capsman - improved CAPsMAN responsiveness on systems with large amount of CAP interfaces;
:
How many CAP interfaces are we talking about?

More than 100 CAPs.

Could you write more detailed - you need lte mini-pcie card that support only Band 31 (450mhz) or you also need the card to support multiple bands?

which exact AT command you want to use?
Most of the standard AT commands are supported by the R11e-LTE card.

Could you make a picture of the setup how you connected the RB14eu to the board and also the external USB cable?
Do you see the USB interfaces in the system when you connect the USB cable?

It seems I have similar problems. Did you find a solution?

Which problem exactly you have?
We have fixed in the recent 6.42RC versions where the CAP interfaces were removed and added back if it looses connection and tries to reconnect for multiple CAPs at the same.

For LHG ac you need to use ARM architecture files - we will update the download page.
We are working on the issue for the ARM based wireless for NV2/Nstreme.

WAP LTE KIT with R11e-LTE supports the the IPv6.

I have a bootloop after upgrading my hap ac lite from rc2 to rc5...

What configuration you had on the hap ac lite?

currently we don't have support for the IPv6 using the ME909s-120 using existing lte emulation driver.

please be more specific about this problem. 1Mbps data-rate is valid for B/G/N standard. But in the picture the 1Mbps rate was used 6hours ago with low signal and since then it is not used. What kind of wireless client it is? What is the distance setting? What RouterOS version and wireless settings ...

My static ports in all bridges just disappear after reboot on CAPsMAN controller router. RB2011UAS-2HnD ROS 6.41rc61. Also on SXT ac, clients are diconnected from time to time (every few minutes). In rc56 was perfect. New bugs? Do you have support output files from older RC where the static bridge ...

if you still have problem getting the LTE interface to recognize, please report to support@mikrotik.com with a support output file.

it looks like more problem with the LTE connection as there is no indication that the data connection is closed. It looks like the connection is switching all the time betwen some LTE Towers. You can try to leave the ping running and check when it stops working. What is the signal of the LTE connect...

New customer - same problem. What appeared to solve the problem last time, does not work now. This setup differs in the way that I put the wAPac as capsman, and hAPac as cap (last time it was the other way around). Both selects 5180MHz for 5GHz. For 2GHz the select different channels. Apparently a ...

wap lte kit supports that feature:
https://wiki.mikrotik.com/wiki/Manual:I ... assthrough

CAPsMAN doesn't support WEP as it is considered insecure.
Roaming will also work with regular APs that are bridged within the same switched network.

Maybe you can use the TR-069 for centralized configuration?
https://wiki.mikrotik.com/wiki/Manual:TR069-client

This will be fixed in the RC53 or RC54

disable the 2 and 3 stream HT basic rates (mcs8-23).

please contact support@mikrotik.com about the sms sending issue and include the support output file.

Hi Uldis, After reading all posts in this, I'm quite worried. I just bought wAP LTE Kit as a solution for improving my LTE internet connection. If I understand well, the kit will not get me 40Mbps. This is very disappointing for such an expensive equipment! Is this true? My carrier is NOS here in P...

Hi, I'm having kind of same issue. When trying to send SMS (/tool sms send lte1 ... ) I get timeout error: [lte,error lte1: no response] [gsm,error sms send failed: std failure: timeout] Is this related? I'm running the latest RouterOS stable version: v6.40.4 Thanks Enable the gsm,debug loggin topi...

there are no big changes since v6.40.4. What CAPsMAN configuration you uses and what does it say in the log file on the CAPsMAN and CAP?

could you tell us more detailed about which features aren't working?

Vendor asking for our IMEI numbers. Is there a possible range for mikrotik cpe?

Many Thanks

Please email to support@mikrotik.com we will provide a list of IMEI numbers.

Changing imei number is illegal.
Let us know how can we help you to get the SXT LTE approved.

I get an A on all networks.

Is there nothing available to lock it to a specific network or tower? Or set a priority for specific towers?

It is possible to lock to specific tower with specific AT command. You can email to support@mikrotik.com and we will provide you with more info on the command.

which modem interface you use on the board?

CQI index is used only for the LTE. It looks like you have connected to the 3G tower.
We just represent the list of the scanned networks. On different LTE modems you don't see the A for the scan command?

(MAKE ONE BETTER MIKROTIK! specs: dual-band ac, gigabit lan and one usb port please! )

We are constantly working on new products

in the quide there is mentioned: "It is possible to use external antennas for the modem, two SMA mounting holes are provided next to the reset button, or if you prefer to attach antennas to the case directly, SMA antennas can be mounted on the bottom of the case if you remove the two plastic ho...

CDC_NCM is in our to-do list but I can't comment when we will start to work on that.

Here is the quick-guide how to change the antennas. https://i.mt.lv/routerboard/files/wAP-LTE-wg-171003121743.pdf Try to point the lte antennas in cross-polarization. Also watch the signal reading while adjusting antennas. You can remove the glue and attach different (higher gain or directional) lte...

Here is the speedtest from a local cellular provider also running on Band3. Signal readings: earfcn: 1300 (band 3, bandwidth 20Mhz, cqi 13) rsrp: -76dBm rsrq: -10dB sinr: 20dB It could be related to the signal as your RSRP is very low. You could try to adjust the board location to get a better signa...

In future we plan to introduce CAT6 or faster LTE category products but I can't provide any ETA on such products.

what speed you are getting from the wap lte and from the usb modem? What LTE category your USB modem supports? Try to compare which band each unit uses as maybe the wap lte connected to different bands or cell tower. Got similar question here, with ZTE MF286 modem that provider gives on same spot i...

what speed you are getting from the wap lte and from the usb modem? What LTE category your USB modem supports?
Try to compare which band each unit uses as maybe the wap lte connected to different bands or cell tower.

on which board you test that?
Check if the usb port is added under system ports.

try to increase the dhcp server lease time to 1h or more.

I use 2011UiAS-2HnD with firmware 3.41. After Urgrade to firmware v6.41rc44 and/or v6.41rc47 the router reboots every one to two hours. in the log I have the following entry: memory system,info router rebooted memory system,error,critical router rebooted beause some critical program crashed I go ba...

In previous published rc version of 6.41 (I think it was 6.41rc38) this E3372-153 didn't work at all. You informed via ticket, that you are aware about it, and next release candidate published will solve the problem. Then we got 6.41.rc44, problem solved, but not the way we wanted... Is it going to...

yes, the modem is in the hilink mode. Which mode you want us to support? As we don't support all the device emulation drivers. Please provide to support@mikrotik.com support output file from the mode where the modem should assign the public IP to the LTE interface.

Hi everyone - SAME ISSUE I NEED the different APN, I bought this wAP LTE Kit and waited for 1.5 Months and paid for internet access in that time - and now this APN thing doesn't work - I'm getting angry here and will think about ever recommending MikroTik to anyone! Also the username and password P...

You can see in the qucik guide there is info how to open the case:
https://i.mt.lv/routerboard/files/wAP-L ... 121743.pdf

"remove both screws below the power jack and slide out the wAP PCB board"

it is possible do using the passthrough option:
https://wiki.mikrotik.com/wiki/Manual:I ... assthrough
Why it is not possible when using RB951G with Huawei E3372 modem?

We tested and it worked - the passthrough client got the 192.168.8.100 IP address.

each modem has different drivers and implementations. That is why some Huawei modems works in passthrough mode and some not.

we are jsut passing through the IP configuration that we get from the modem. If the modem uses NAT and provides local IP then we are passing that IP to the configured interface.
If you can configure the modem to provide public IP then that IP will be passed through.

it is possible do using the passthrough option:
https://wiki.mikrotik.com/wiki/Manual:I ... assthrough

Use the Passthrough feature like matiaszon mentioned - if your provider will give the public IP you will get that IP on the RB2011.

Please contact support@mikrotik.com and include the support output file.

I'm using it on a steel boat,. Was your setup a simple case of SIM in, power up? Besides adding passwords or renaming the device, did you have to configure anything else? Like frequency bands ? Or DHCP client? Mine is refusing to connect, and I’m used to the Base Box that needs all kinds of things ...

Before the output file I want to say what have I done. v. 6.40.4. Default APN of mobile carrier in LTE and everything works. Custom APN brought from mobile carrier, username e password taken from APN server, pap authentication and it doesn't work. A thing that I'm not able to do is a DHCP client on...

Before the output file I want to say what have I done. v. 6.40.4. Default APN of mobile carrier in LTE and everything works. Custom APN brought from mobile carrier, username e password taken from APN server, pap authentication and it doesn't work. A thing that I'm not able to do is a DHCP client on...

We are working on a fix for the v6.41rc38 version as we have seen it crash with the lte.
When we will release a new RC version you can try if it works.

If it fails then please enable the lte debug logging and email to support the output file after you see it fails:
/system logging add topics=lte,!raw

For the v6.41RC versions the username/password is moved to the '/interface lte apn' menu (currenly no Winbox support - only Console support).

Please enable the lte debug logging and email to support the output file after you see it fails:
/system logging add topics=lte,!raw

What's new in 6.40.4 (2017-Oct-02 08:38): : *) wireless - improved WPA2 key exchange reliability; ; I´m seeing more of "disconnected, max key exchange retries" messages than with 6.40.3 Currently I´m monitoring one specific client with an WPA2 enterprise SSID: http://fs5.directupload.net/...

How are you powering the board? Was it on all the time or you had it turned off?
Please make a support output file and send it to support@mikrotik.com

It is supported, here you can look in this topic newer messages:
viewtopic.php?f=7&t=112881

Please Tell us more about etsi1 Here is the info: [admin@MikroTik] > interface wireless info country-info etsi1 ranges: 5270-5330/a,an20,an40,ac20,ac40,ac80,ac160(17dBm)/dfs 5490-5590/a,an20,an40,ac20,ac40,ac80,ac160(30dBm)/dfs,passive 5650-5730/a,an20,an40,ac20,ac40,ac80,ac160(30dBm)/dfs,passive 5...

strods , What is difference between earlier RC, for example: What's new in 6.41rc38 (2017-Oct-03 11:51): *) lte - added Passthrough support (CLI only); What's new in 6.41rc31 (2017-Sep-20 06:56): *) lte - added Passthrough support (CLI only); We are constantly improving and fixing bugs for this fea...

In the Webfig you need to open lte1 interface scroll little bit down till the Status section - you will see that info.

Hi Uldis, Both are using band 20 its an iPhone 7 Plus, I am now using wAP LTE on current build 6.40.3 no difference and the LTE package is installed. When I first set up the wAP LTE when I got it with the factory firmware the Status/Info on the lte1 interface was there, but after I upgraded to the ...

Which band are you using? When you open the Status/Info on the lte1 interface what CQI value you have in the EARFCN during the speedtest?
Maybe iPhone is using Carrier Aggregation and that is why it gets more speed? What iPhone model you have?

Having the same problem very disappointing I was expecting big things from this product, did you find a solution?

Could you provide more detailed info what exactly is not working?

Please add a logging topic and post the logs:
/system logging ads topics=lte,!raw

you can check maybe someone else responds on the Three UK connection details.
wAP LTE kits should be available for order from the distributors.

You need to specify the allow-roaming option to yes from the console.
You can see in the log files when you enable the lte logging logs to see what command is sent.

We are not aware of that. Maybe the Personal Hotspot uses different APN?

It's rather no go as only one interface for passthrough. I can simply pass through IP / gateway etc to ethernet and that's it - so hAP AC get info from LTE on WAN port then second NAT has to work this out. Got another question about LTE modem but this probably has to go to support - is it possible ...

AR5413 device could work only as a client and not as AP in nv2 sync mode. It is due to the lack of hardware feature support that is required for the sync.

you can't reduce the nat on the hap ac - as the hap as gets the IP from the LTE provider. If you disable the NAT on the hap ac the LTE provider will not know your local IPs that you are giving out via dhcp server on the hap ac. If you want to extend the ports, make sure that on the hap ac the sfp po...

please make a support output file and send it to support@mikrotik.com we will check why the interface isn't recognized as lte.

uldis, thank you very much, its working.

But why that option is not documented on the wiki or anywhere else?

Thanks again !

Thank you for the report, just added that:
https://wiki.mikrotik.com/wiki/Manual:Interface/LTE

How?

Using such command:
/interface lte set lte1 allow-roaming=yes

I've got question regarding WAP LTE KIT: To set it in passthrough mode I need: /interface lte apn add name=internet passthrough-interface=bridge /interface lte set lte1 apn=internet ?? I'ts running bridge mode - will be connected to ether1 on hAP AC and latest RC firmware is there too so I'm checki...

Yes, you can enable the data-roaming option for the wAP LTE.

Please add a logging topic:
/system logging ads topics=lte,!raw

You will see the modem status in the logs if it looses connection or switches between the towers.
Have you tried to point iit/aling the board to check if it gets better connection?

Problem with speed. Mikrotik WAP LTE kit Europe standard. Network speed with Mikrotik at 4G 15Mbit and with Iphon6 40Mbit . At 3G still worse, three times slower. The same position of measurement. I was expecting Mikrotik to be faster, bigger case, better antenna ... Wha RouterOS you are using on t...

What version you had before on your router where it was working ok? I reverted back to 6.40.3 where speeds are normal, but that version too has the problem that the E3372 is unstable an looses LTE connection when there is some load. I hoped the latest RC would fix this... Please contact support@mik...

Problem with speed. Mikrotik WAP LTE kit Europe standard. Network speed with Mikrotik at 4G 15Mbit and with Iphon6 40Mbit . At 3G still worse, three times slower. The same position of measurement. I was expecting Mikrotik to be faster, bigger case, better antenna ... Wha RouterOS you are using on t...

There is a problem with GSM and LTE connecting problem with wAP LTE kit. It's not connecting to the time as i have change few times from LTE(buil in) card beteween #G and LTE "network mode". After changing sometimes only to LTE or sometimes only to #G or sometimes to GSM and LTE - it conn...

With v6.41rc31 my LTE connection was very slow, max. 7-10mbit/s and high pings >200ms. Also the E3372 LTE modem (still) loses connection when downloading larger amounts of data (via Steam for example) so you have to reboot the RB. What version you had before on your router where it was working ok?

WAP LTE kit has started to ship to distributors so you can check which your distributor when you will be able to get it.
WAP LTE kit will be able to get the public IP if the Cellular provider will give out such IP.

ste, enabled wireless,debug logging and check the logs. Wireless station will always try to connect to the strongest signal AP unless you have some specific Connect-list rules. Also note that we have station-roaming setting in newer versions.

Any use cases for this option?

Here is the discussion about that option:
viewtopic.php?f=7&t=124884

please contact support@mikrotik.com

you can now adjust the antenna position and watch the signal values.

it depends on the operator, could be from few minutes to approx 15-30minutes. It is only at the first connection, after that it should connect very fast. Are you using the current RouterOS v6.40.3? When the lte connection is established it updates the signal fast, just like wireless link signal upda...

SXT LTE can connect only to Band3 (1.8ghz) and Band7 (2.6ghz). Probably your phones connected to Band20 (800mhz) which isn't supported on the SXT LTE.

are you sure you have stable connection between the CAP and the CAPsMAN? Please try to run such script to ping the CAP board. Instead of 1.1.1.1 specify the CAP address. Then check the log and the results if before the CAP disconnection there were some ping loss. :while (true) do {:log info ("p...

Looking at the wireless interfaces of my CAPSMAN enabled "WAP AC" devices: "WMM Enabled" is not enabled? Reason for asking: I have users complaining about bad battery time when they are connected to our Mikrotik access points, e.g. After 1/2 day the battery on an Galaxy S6 is do...

I am wringin about this part below. I suggest to put vlan not on the ether1 but on the Bridge-vlan1.

/interface bridge port
add bridge=Bridge-vlans interface=ether1

/interface vlan
add interface=ether1 name="vlan99-Management" vlan-id=99

One option would be to add additional setting "signal-out-of-range-time" where you could adjust the time how often to check the signal. By default we could leave 10seconds. Also we could add an option 'infinite', where it would check the signal only on the initial connection. Would such so...

You need to move the Vlan inferface from the ether1 to the bridge interface as that ether1 interface is a part of the bridge interface.

nz_monkey, are you using VLAN interfaces and Bridge interfaces as in v6.41RC versions there are lot of changes to the Bridge implementation that could cause some problem.

You can download prior versions of the RC by manually adjusting the URL from the download page if you wanted to revert back to an RC that it still works at for you to retain the new bridge. There is bug that after the downgrade from the newest RC you need to do a soft reboot of the board as the dhc...

DANGER If you are running CAPSMAN avoid 6.41rc23 6.41rc23 breaks CAP communication with CAPSMAN, at least when using a tunelled datapath. Downgrading to 6.41rc20 does not fix the problem :( Mikrotik support are aware of this issue. Too late. My users complain that they are connected to the wifi, bu...

In CAPsMAN WMM is enabled by default and you can't disable it.

Did you choose the united states 3 country in the CAPsMAN configuration when setting the CAP?

Please make a support output file from the CAPsMAN and the CAP and send to the support@mikrotik.com

No, it is not possible.

Starting from RouterOS v6.41rc16 you can use the LTE passthough mode to pass the traffic from the modem directly to a host on some routers interface. tknuutil Multiple APN support like you posted in the picture will be supported only with WAP LTE modem. Information how to use the option is listed i...

So I assume that when in LTE passthrough mode there can be no features such as traffic shaping or WAN failover, etc. since the MikroTik is no longer acting as a router and is only transparently passing traffic from the LTE device? Correct, queues will not work in this configuration - you can only e...

uldis, No chance to manage it remotely then it physically is inaccessible, in another City for example? We should be able to log in to verify or configure settings when something may be wrong. Thank you! WAP LTE kit will have option to activate multiple APN at the same time (if the provider support...

Hallo! It is/was running perfect with 6.40.1 since it was released und before with 6.39.2. The Firmware of the modem is 11.617.06.00.00. To activate the logging is only with RC helpful, isn't it? I will try it once more in the evening. We tested and 909s-120 works with such firmware in RouterOS6.41...

I am having issues with CAPsMAN on 6.41rc13... Looks like cap interfaces with CAPsMAN forwarding do not pass any traffic. The issue persists with 6.41rc16... Just downgraded to 6.41rc11 and wireless is up and running. Please provide us more info on your setup and how to reproduce the problem as we ...

uldis,

Another question, is it possible to assign second IP to wAP LTE itself in order to manage it?

You can manage the WAP LTE from another interface like vlan or wireless interface that is not a part of the passthrough interface.

Hallo! It is/was running perfect with 6.40.1 since it was released und before with 6.39.2. The Firmware of the modem is 11.617.06.00.00. To activate the logging is only with RC helpful, isn't it? I will try it once more in the evening. We tested and 909s-120 works with such firmware in RouterOS6.41...

Hallo! It is/was running perfect with 6.40.1 since it was released und before with 6.39.2. The Firmware of the modem is 11.617.06.00.00. To activate the logging is only with RC helpful, isn't it? I will try it once more in the evening. We tested and 909s-120 works with such firmware in RouterOS6.41...

Starting from RouterOS v6.41rc16 you can use the LTE passthough mode to pass the traffic from the modem directly to a host on some routers interface. tknuutil Multiple APN support like you posted in the picture will be supported only with WAP LTE modem. Information how to use the option is listed in...

Hallo! After updating a RB922 with a Huawei ME909s-120 modem to 6.41RC16, the lte-interface doesn't switch in running mode. The status of the interface shows only one information: "Functionality == minimal", nothing else. Is this a normal behavior in case of lte-passthrough or a bug? rega...

better to leave them hidden - CAPsMAN will automatically use the max enabled chain configuration depending on the CAP hardware.

vlatko , Minimal difference between noise and signal - depends on nature of noise - if it is continuous wave or "packet" based. If your AP is able to "see" in scan master AP in the presence of noise signal, you are fine. You can not predict throughput because it is not clear wha...

We are currently looking into this feature but I can't comment when or what lte interfaces will support that feature.

scampbell, everything is correct - on the Master AP it will not show any information on the monitor. The only info on the Master you will see in the log entry that Slave AP wanted to sync. On the Slave AP it will show to what AP it synced. We will try to fix the Winbox support for those new nv2 sett...

axc27, could you please test out the latest Release Candidate RouterOS version as it has such changes in the wireless that maybe could help for the dhcp issue with the amazon fire tv?
*) wireless - always use "multicast-helper" when DHCP is being used;

Frequency field is only the configuration field - the actual used frequency you can see in the Status tab or by monitoring the wireless interface from the console. Scan-list is used for looking for available channels but if you have a frequency specified, it will first try to use that frequency. But...

A step closer but requires AP's to be on the same frequency though :( There is no need for synchronization if your APs on the same tower uses different frequencies as then there is no big interference between them. @Uldis You should know better than this. There is interference even if you are 200mh...

Hi, i tested sync mode for nv2, but it did not run for me I set AP1 to sync-master, client connectiong all OK But when i set AP2 or AP3 to sync-slave, the Clients did not come back. Log says nothing AP says runnig but no clients are connecting on AP1 Master i see nothing that communication with AP2...

it is a Winbox bug, we will try to fix it. Try using console for setting that interface now.

specify the lte1 interface in the tool sms menu. Then make sure you have lte interface in running state and then you can send and receive the messages.

A step closer but requires AP's to be on the same frequency though

There is no need for synchronization if your APs on the same tower uses different frequencies as then there is no big interference between them.

1S or 2S means how many Spatial Streams are used. With that value you can know better which MCS is used. https://en.wikipedia.org/wiki/IEEE_802.11n-2009#Data_rates Yes, SGI stands for Short Guard Interval If your link doesn't use 3S it means that with 2S it can get better and higher data-rate withou...

Thanks @uldis, but I've already set multiple channels in selection tab. But capsman keeps assign the same channel to both caps. The only thing that I have not set is the reselect interval. I surely will try it. The only question is: during the scanning time, caps will stop working, right? How long ...

the Apple device drops connection to wifi even if it is used (not locked) when the 5 minutes update timer hits?

by default the MAC address option is chosen but if the CAPsMAN was not accessible via MAC it switches to IP.
If you want you can force to use just the MAC or just the IP.

New RouterOS version have option to specify multiple frequencies in the frequency field for the CAPsMAN configuration.
Also we have an option for reselect-interval where the CAP will do periodic check if a better channels is found.

This RC version has some additional stability improvements to SXT LTE compared to v6.39.2

please install a lte package and the lte interface will appear again.

sansltd, please contact support@mikrotik.com about this problem and include the board SN in the email.

The upgrade auto disabled ipv6 package.

You, used the bundle package for the upgrade?
On what RouterBOARD you saw this and what RouterOS version you had before?

*) wireless - added option to change "nv2-downlink-ratio" for nv2 protocol (CLI only); *) wireless - added option to set "fixed-downlink" mode for nv2 protocol (CLI only); Thanks very much for this. Tested it straight away it and works great. Throughput went way up for nv2 secto...

please contact support@mikrotik.com about this issue and include the support output files from CAPsMAN and CAP.

we have added basic info on that in the Nv2 wiki manual. Here is the info: Nv2-mode - specifies to use dynamic or fixed downlink/uplink ratio. Default value is "dynamic-downlink" Nv2-downlink-ratio - specifies the Nv2 downlink ratio. Uplink ratio is automatically calculated from the downl...

could you tell us what RouterOS you are using and what board and LTE modem?

we have added basic info on that in the Nv2 wiki manual. Here is the info: Nv2-mode - specifies to use dynamic or fixed downlink/uplink ratio. Default value is "dynamic-downlink" Nv2-downlink-ratio - specifies the Nv2 downlink ratio. Uplink ratio is automatically calculated from the downli...

I would suggest to remove the tkip and use only aes encryption.

ifc, what exactly is not working?
Make sure you specify the supplicant-identity the same as the mschanp username an also set tls-mode=dont-verify-certificate

please contact support@mikrotik.com with a support output file from working state in v6.39.1 and then another file after reboot where it doesn't work.

Can the new LtAP mini be used inside a bus for providing Wi-Fi access to internet to the passengeres? Can the GPS information be read remotley to determine the bus location? Yes, you will be able to use it as an AP for Wi-fi inside the bus. Yes, you can use the scripts to read the GPS information f...

Provision the configuration with B/G/N band setting and then it will choose the frequency from 2.4ghz

6.40rc2 + WAP AC:
I was told that an IPhone 6s wasn´t able to connect. (Test with an old Enterasys 3600 access point was succesful, though)

Please post more details about your problem.
Maybe you could write to support@mikrotik.com about this problem and include a support output file from the router?

please upgrade to v6.40rc2 and check again.

Can you give some tips? You are using witch device? You are using virtual ap to? I think I am using it on a wrong way I have to apologize. I just received reports from my colleagues that user complain about massive disconnection and authentication problems => Back to something <6.39RC70 What was th...

in v6.39 it will be possible.
Make a new CAPsMAN Channel entry with all those frequencies and specify that channel for the CAPs - it will automatically select one of those frequencies.

6.39rc80 (2017-Apr-25 09:23):
"/caps-man registration-table print detail" still gives me empty eap-identity, i.e. only:
eap-identity=""

This fix will go only in v6.40rc as v6.39rc is going for final testing for v6.39 release.

you can upload the wireless package to the CAPsMAN directory where are the upgrade packages stored and manually rename the wireless package to wireless-cm2 and the upgrade should work without problem.

we were able to find the problem. It is related to the DHCP lease time. By default Lease time on the MikroTik DHCP Server is 10 minutes. The iPhone disconnects approx after 5-7 minutes (little more than half of the DHCP lease time). On TP-link the lease time is 120 minutes and that is why the iPhone...

First of all: I had the problems with version 6.39rc60 not rc62. I now upgraded to rc62 and will check again. the problem occured mainly in the middle of the day when I am not there or in the middle of the night, so I have no clue which device it could have been. there is no iPhone 6s present. the ...

Is there any possibility in future, that we could set other modes in cap settings than ap mode? I wish there was a station mode...

Current CAPsMAN implementation doesn't support that and we do not plan to add that in near future.

Version 6.39rc62 has been released. Changes since previous version: *) wireless - added PEAP authentication support for wireless station mode (CLI only); Ok, CLI only was added later... I was checking via WebFig. How is it done? /interface wireless security-profiles add name="peap" mode=d...

When I start background scan on cap it tells me: failure: background scan not supported in this state I ran it from cap router, not from capsman router. It will be only supported from the CAPsMAN side. Then how to run that scan? From the CAPsMAN: [admin@CAPsMAN] /caps-man interface> scan cap1 Flags...

When I start background scan on cap it tells me:
failure: background scan not supported in this state
I ran it from cap router, not from capsman router.

It will be only supported from the CAPsMAN side.

*) capsman - added support for "background-scan" and channel "reselect-interval"; How does background-scan works? In winbox I still can't run background scan on capsman interfaces. Winbox support for all the new CAPsMAN Features are not made yet. You need to use console. As soon...

Maybe you can make EOIP tunnel between the SIte1 and Site2 and bridge together and then you can push the traffic trough the link?

still not fixed in 6.39rc62 :( Hello, *) wireless - fixed false positive DFS radar detection caused by iPhone 6s devices; this problem still persists with version 6.39rc58 please fix it is also not necessarily related to iphone 6s devices but occurs randomly (could be that a 6s is walking by, but t...

*) capsman - added ability to specify multiple channels in frequency field;
Is this so that Auto-Channel will only select one of the frequencies listed ?

Yes, it will choose one of the specified frequencies.

We were able to detect the false radar detection - iPhone 6s were triggering the DFS. We were able to fix it. Current RC version (v6.39rc58) contains a fix for that.
And in the next RC version which we will release soon we have finetuned that detection even better.

v6.39rcXX-51: - Wireless speed issue: speed only half (~ 140Mbit/s; half speed compared to v6.36.4; downgrading back to 6.36.4 results in higher speed) We need more info how to reproduce this problem. Step by step so we could try to reproduce this problem. What wireless packages you used on the 6.3...

Please make a support output file from the CAPsMAN and the CAP and send it to support@mikotik.com
Also include the network diagram how the CAP and the CAPsMAN is connected together.

I would suggest to try out Local-Forwarding option for the CAPsMAN Datapath.

You need to enable the Static-virtual on the CAP then it will try to remember that interface by the radio-name.
Here is more info on that setting:
https://wiki.mikrotik.com/wiki/Manual:C ... figuration

You can use the non-standard frequencies but we do not guaranty how well the device will operate outside the standard wireless frequencies as the device is not calibrated for those frequencies and also it might have filters that lowers the RX/TX for non-standard frequencies. Please use standard freq...

please send the support output file form the crash to support@mikrotik.com

- WAP AC 6.39rc26 - users reported that their clients get disconnected randomely - I watched caps,info logging and found concurrent "disconnected, group key timeout" messages for multiple clients running on 2.4Ghz, i.e. 5 clients (e.g. with different MAC addresses starting with: 3CE072, F...

You can't have AP without SSID.

please provide us with more detailed info on the error that you have and the setup.
They disconnect and reconnect back?
What amount of traffic is transmitted when the problem happen?
Does it happens also when using the SGI without CAPsMAN?

When you had the 192.168.1.x network on the router what exactly was acting weird?
let us know if you were able to connect to connect to Zyxel an check if it can connect to the Internet and what does it shows as WAN connection.

Well, there would have to be a way to manage the router when in bridge mode, as long as that is possible and bridge works, I would be happy. In current setup I get the external public IP from ISP via DHCP client to MikroTik. I also can access the bridging router with its internal IP, so I can manag...

If you want us to make the LTE bridge more we need more information on the requirements for that.
For example, when the LTE interface is in the bridge mode, do you need connection to the Router as well as the Router now just passes the IP from the LTE network to the ethernet host?

About *) wap-ac - fixed performance problems with 2.4GHz wireless (additional reboot after upgrade required); I have same issue with wAP (RBwAP2nD) - in the same place there are D-Link DAP-2310 and just buyed wAP. I connect from the same device and run iperf. D-Link gives about double speed above w...

Need a home AP LTE device

Sent from my C6833 using Tapatalk

We will have a WAP LTE Kit this year.

Please upgrade the RouterOS on wap ac to v6.39rc15 as there are some improvements for wap ac in 2.4ghz.

About the ssid now showing up - check the status on the cap interface in the CAPsMAN what channel it selected.

From the v6.38 changelog:
*) capsman - added "group-key-update" parameter;

on startup they will do auto frequency selection so most likely it will select different channel.

Per your documents the frequencies and EIRP are:
2400-2483.5 Mhz 36dbm
5825-5875 Mhz 36dbm

Do you have some document for the rest of the 5ghz wireless frequency ranges?

Currently India county has such EIRP values
2402-2482 Mhz 20dbm
5170-5250 Mhz 20dbm
5250-5330 Mhz 20dbm
5735-5835 Mhz 20dbm
5830-5870 Mhz 36dbm

If there some newer documentation stating the EIRP values are different we would need to see that document to update the values for this country,

we will try to fix this problem in RouterOS v6.39rc13

looks like the post is not finished - some info missing at the end.
What RouterOS are you using?

Please make support output file and send it to support@mikrotik.com so we could see your configuration and reproduce this problem

Broken:
DHCP over EOIP (no encription)
Some devices don't get IP's even directly connected - Panasonic VOIP phone. Works fine in 3.37.3

Please make support output file and send it to support@mikrotik.com so we could see your configuration and reproduce this problem

Thank you for the report, we will try to check why the CAPsMAN isn't advertising the SGI flag.

Hello! DHCP server in 6.38 and higher version include bug with synthetic NIC (Hyper-V) on my RB-951G. When virtual NIC trying to get offer from dhcp following message in log is appear: - dhcp,warning,info,debug dhcp1 offering lease Virtual_NIC_IP for Virtual_NIC_MAC without success As result i lost...

Software 6.38 cpu usage for fasttrack connections very high. For example ( 951g-2hnd at 750mhz) bandwidth 300 Mbps 6.37.3 cpu usage 30-40, 6.38 cpu usage 80-85. My 951G dropped from 305 Mb/s with ~50% CPU (6.37.3) to 210 Mb/s with 100% CPU (6.38). I had to downgrade to keep the speed up. If I check...

There is some performance issues on 6.38 On my RB3011 ROS 6.37.3 Download 900Mb/s Upload 200Mb/s CPU 14% during speedtest ROS 6.37.3 Download 260Mb/s Upload 200Mb/s CPU 67% during speedtest I'm back to 6.37.3 Please report to support@mikrotik.com with a support output file so we could check the con...

Hi. I discovered the following problem with the current 6.38 Release on a RB951G-2HnD with the auto certificate feature of CAPsMan: If you request certificate with a CAP on the same device as the CAPsMAN , the device is unable to issue the private key for the certificate. The certificate for CAP is...

vitaliyy, please provide the export file to support@mikrotik.com from both versions (you can replace the pre-shared keys in those files).
At least on my spare hAP AC router I got 500/700Mbps (download/upload), I hit ISP bandwidth limit.

Updating to 6.38 fastrack is broken, maximum download and upload speed is 150 Mbits, after downgraded to 6.37.3 all ok, speed about 800-850 Mbits

What device you are testing the fasttrack?
Please report to support@mikotik.com with a support output file attached.

Would you be so kind and shed some light on this line in the changelog: *) wireless - added "station-roaming" setting (cli only); Here is information about this station-roaming: http://wiki.mikrotik.com/wiki/Manual:Interface/Wireless#Station_Roaming Now you can disable station-roaming if ...

Please upgrade to the Release Candidate version where this problem with the WDS has been fixed.

please contact support@mikrotik.com and include the SN of the effected boards.

dBCooper, please write to support@mikrotik.com and specify all the Serial Numbers of the devices that doesn't show wireless interfaces.

Search found 3446 matches