MikroTik

Zapnologica

I am still not having any luck: the error i get on the pc when i dial the pppoe account is on pc: Connection failed with error 691 on mikrotik PPPOE connection establishes from mac address terminating... - use Dylan authentication failed - radius timeout disconnected in user man do i have to enable ...

Zapnologica

oh ok,

I have done abit of this.

But marking packets that are downloading is harder as the local ip's are not in the packets untill a later stage? how do i sort that out?

is there no way to link a pppoe connection to a ip?

Zapnologica

thanks allot, i will try that now,

I dont think i was checking the incoming.

Thanks guys

Zapnologica

Good day, I just wanted to ask for your guys advice, I have a 4meg adsl line in a commune and there are about 10 people using this line. Now what i want to do, is be able to priorities certain users over other users and then also if someone is downloading then i dont want the internet to be dead... ...

Zapnologica

I have reloaded router os and it is still not working. I have no idea what could be wrong.

I mean its not a complicated process...

Zapnologica

Howist, please tell me what i am doing wrong? I am trying to get pppoe server to use userman on my mikrotik (the same router for server and user man) with v5.14 All i do is? 1: add router in userman with ip address and password 2: add a radius in mikrotik with same ip and password and then check ppp...

Zapnologica

Will do,

I did a site survey and there weren't any other wireless networks found.

Zapnologica

Hello, My router has stapted bombing out and it keeps randomly rebooting, and when i log into winbox after it reboots there is the error message in red saying " Router was rebooted without proper shutdown (cause 1) " what does this mean? i am assuming that cause 1 means some thing specific...

Zapnologica

Howist, I recently got a RB751U and i have set it up as the main router at my commune, I am having trouble with the wireless. Its only about 30m away and the ping varies like crazy and the packets drop and the connection quality i simply terrible, the signal strength is still good though? Even when ...

Zapnologica

Good day,

Does any one know if mikrotik supports USB iburst modems yet?

I have been wanting it to for years now. Is there not a feature suggestion box some where or some thing?

Or is the problem lie with iburst not making drivers except for windows?

Thanks

Zapnologica

BTW:

I had the smae problem again.

both the MRU and MTU have to be set to 1392 !!!

otherwise she wont work!!!!

Zapnologica

Howist guys, I also have the same problem. My internet connection comes from a usb modem that my windows pc dials a pppoe connection and then connects. The internet is then shared via a wan NIC to my router which then nats it and etc> this router has a pppoe server. The server then also has a LAN ni...

Zapnologica

Im pretty sure that it was that.

I meant to make it /16 its just i didn't know that it was so resource intense.

When i removed that it worked fine.

Zapnologica

Just BTW:

IT was the /16 subnet

Zapnologica

Howist. I have a wireless link between 2 buildings. I want to implement some QOS on the network so that we can still play games while data is being copied on the network. I want to use Queue tree. Do i make the main parent the interface?? "wds" and then i only want to qos traffic going OUT...

Zapnologica

Sorry for the late reply. but i have been busy with the link. I have building A 's network connected to a mikrotik ( client) then that connects to an (AP) bridge with a wds transparent bridge im between them. That AP then connects to a RB450G in ether5 That RB450G is the main router for the network ...

Zapnologica

Good day, Can some one help send me in the right direction. I want to setup a few rules for certain IP's on our network and i want to log every site that they go on. As recently we had an employee that just sat on Facebook all day and did no work, but we had no proof. So now i want to put some rule ...

Zapnologica

Howist,

Will a RB450G be able to handle a /16 subnet?

Cause if it will then it will solve out problem?

And still route traffic?

Zapnologica

got any links? or tuts on how to do that?

Sounds like it could work.

Zapnologica

Any one?

Is there not a setting on the pppoe server that forwards the attempting connection after it has failed to login?

Because if i have the pppoe server connected i cannot connect to any other pppoe connections (on the internet via a modem) or any thing, the mikrotik s one is dominant. ???

Zapnologica

I just have the nat to hide the computers from the network above it, its not for secutiry.

Is there not any other configuration that i can setup that will allow for the computers to be isolated but availble for certain ports and ips?

Zapnologica

ah kak, I see what you mean. Even if the connection is initiated by the computer below the router ? Cause reason i am asking, In this network the computers below the network connect to a server up stream using Novel, an dif they login now, the novel server connects to the IP of the router, so if som...

Zapnologica

ah kak, I see what you mean. Even if the connection is initiated by the computer below the router ? Cause reason i am asking, In this network the computers below the network connect to a server up stream using Novel, an dif they login now, the novel server connects to the IP of the router, so if som...

Zapnologica

Howist,

How do you allot a certain ip or protocal to bypass your firewall with mikrotik?

I have a rotuer (NAT) and i want to let certain computers above the nat router see into my network??

What do i do? Thanks

Zapnologica

weird.. If i disable the DHCP server for a min the cpu usage does not go down? Could it not be that the dhcp is telling the computers that this mikrotik is the gateway and then there is no internet connection connected to the mikrotik so every pc keeps talking to RB wanting internet and then it has ...

Zapnologica

Howist, I just wanted to ask. Does dhcp server use allot of the routerboards cpu? Cause i have a rb433 setup just as a dhcp, no nat no nothing and there are about 50 clients and the board chills at liek 60-80% cou usage? Why is this? I was looking under firewall and there are 25000 connections>? I j...

Zapnologica

yea you right, Sorry, typo error here is the output: [admin@MikroTik] > /ip address print Flags: X - disabled, I - invalid, D - dynamic # ADDRESS NETWORK BROADCAST INTERFACE 0 192.168.1.5/24 192.168.1.0 192.168.1.255 ether1 1 192.168.5.5/24 192.168.5.0 192.168.5.255 wlan1 [admin@MikroTik] >

Zapnologica

I have attached a drawing of the setup i currently have. I just set it up so i can fully under stand the concept; Routes.jpg What 2 routes do i have to add to get those 2 computers to see each other? I have tired but i cant get it right? and from my logic i need to add 2 routers one for each directi...

Zapnologica

So i would need 2 mikrotiks

one on each side of the bridge??

OR can i do it with one? ( mikrotik router pluged into wireless bridge and then into lan??)

Zapnologica

howist, Can some one please tell me how you go about joining 2 or more networks with diff ip ranges to each other? I know its prob very simple but i just wana read up on it etc. I have 2 buildings each with their own dhcp and ip range, now i want to ad a bridge between the buildings and allow the co...

Zapnologica

or can i some how block pppoe connections on the one NIC in windows with windows firewall???

Zapnologica

Howist, I am having a problem with my pppoe server. On my server i have a PPPoE client for our inernet which goes through a usb modem. And then it goes to the mikrotik. When i create a PPPoE server on our network (which the server is connected to with a diff NIC) the PPPoE dialup accoutn does not co...

Zapnologica

Hey, I have a problem that i am not sure how to solve, I have a server, and i have a usb modem that connects to the server. Now i need to share the internet on the server via the network but i want it to go throught the mikrotik so i can control all the internet access on the mikrotik, but i also ne...

Zapnologica

Could my transparent proxy rule not be messing with it?

Zapnologica

Good day, I am trying to give my webserver access to the internet: i have added this in the Firewall: add chain=dstnat in-interface=ISP protocol=tcp dst-port=80 action=dst-nat to-address=192.168.1.5 But when i go to the web address nothing happens and in winbox it does not show any packets have been...

Zapnologica

Good day, I have recently gone to university and i have moved into a student residence. I want to set up a network where a few users can game/ copy files between 3 buildings. I have attached a picture of the basic idea i was thinking off. All pcs would be on same network range as they would see each...

Zapnologica

How would i make it so that i can use another internet connection in the day.

I have 2>

So i want it to use internet a in the day and then internetb at night?

Zapnologica

So will that just kill all internet between 6 in the morning and 12 at night?

Zapnologica

Which reset button?

There are 2 on the rb750? There is the gold ring one where you have to make a connection and then the black button that you push

i hope its the gold one as my black button one broke off

Zapnologica

Good day, My one ISP offers free internet between 12am and 6am. So i want to find out how i can setup the mikrotik to only allow traffic through that internet connection between that time? I dono if i have to wright a script that adds that route at 12 every night and then disables it in the morning?...

Zapnologica

More crazy ideas. 1: Have a NAS type function for RB's with a usb port. Allot of the commercial routers are coming out with a file sharing option and a usb port. Would be great to attach a external hdd and be able to share it on the network. 2: (really crazy idea) Support USB Web cam ip transfer. So...

Zapnologica

Howist, Ok the router to router pptp link worked. I am just having trouble with the routes. On my router at home. I have a route with distance=1 that allows for the internet to work? (the pptp goes through here) Now how do i route my computers traffic through the pptp route? cause i cant have two ro...

Zapnologica

i used pptp , i think windows just tried all of them. Cause i saw pptp popup,

So u say i must try from router to router.

They both mikrotik routers, so it should be fine.

Zapnologica

I followed that setup and i used my windows 7 laptop to try connect and i keep getting error 800.

Zapnologica

Good day, I am not entirely sure what i want to do is called so thats why i am askign here, i have googled and vpn, ppptp pppoe and all sorts of different protocols pop up. I have a Mikrotik Router with a fast internet ADSL internet connection at my offices. Now what i want to do is get my self a LO...

Zapnologica

Yea, i deffinatly did that.

Both Ips, in user man and mikrotik where the same for radius and router.

IT still didnt talk. Took me about 2 hours to get it to work ?

Zapnologica

does this mean that the rb750 cannot run v5?

Thanks i will give that a try.

Zapnologica

I am having the same problem.

Im using v4.15

It was working fine before, but i had to change the ip address that it was using and now it wont want to work with any ip or nothing,

It just keeps saying RADIUS server not responding.

How did u fix you fix your problem?

Zapnologica

ROS upgrade, didnt change any thing,

Will try get a newer firmware.

Zapnologica

I contacted my supplier and they said they will try get it,

I will let you know.

Zapnologica

Yea, No lights on all 5 ports,
The Power light is on,

and the other end of the cable does not power up either.

Just the mikrotik net install?

Zapnologica

Any ideas?

I cant just throw the RB away>?

Zapnologica

I have the same problem. My sierra MC8792 modem makes the board very slow and it wont connect, I plugged some random usb 3g modem in and i worked no problem at all. I think that there might be a problem with the sierra MC8792 (they not on the list of compatible hardware) but the shop that sold it to...

Zapnologica

Still not working... This really sucks. I see on v5 that under ports there is a firmware button? Is that ot update the firmware of the ports (modem)? If so great, but where do i find the firmware for the modem. i have looked high and low on their website? Should the connection just work with all the...

Zapnologica

i have read that wiki page, and also none of them respond on the terminal cause the whole RB does not reallty function.

]But i will try v5 thanks

Zapnologica

hey, Yesterday i loaded v5.0rc5 on a RB750 of mine and now it dont work ??? I uploaded it and then rebooted, it all seems fine. The lights come on and it seems to boot. but if u plug in a lan cable, no lights come on and u cannot access the RB? What do i do? cause there is no serial connection to ac...

Zapnologica

Pls help :( How do i find out which channel on the modem does what? Under ports it says my modem has 7 channels open? but all the commands etc require you to know which channel does what? Also how do i upgrade the sierra cards firmware, because the whole routerboard is slow and unresponsive and the ...

Zapnologica

Hey, today i got a Sierra 3G modem and Rb411U to play around with. How do i find out my signal strength? Also, Do i have to attach an external antenna to the modem? Is it possible to send SMS's through the sim card? like service requests to purchase data bundles etc? I have been reading on the forum...

Zapnologica

Oh ok cool.

So its not a major problem then.

Zapnologica

So should i spray anything on the board before putting it into the enclosure?

U dont get like a block that absorbs moisture and that that i can put in the box. Like when u buy a pair of new shoes, it has those packets in them?

I was just thinking that might help.

Zapnologica

but then once that account ( user) has used up the 500mb will i have to manually delete them? Or will it delete its self? Cause i am trying to remove the administrative side? I just want clients to have to buy the username and password thats it. And then i dont have to employ some one who knows how ...

Zapnologica

Hey, I need to setup a hot spot where i can sell prepaid data vouchers, but userman only allows u to govern it by time. I want to use size. So i want to be able to generate like 100 500MB vouchers that i can then give to random shops and caffies and they can then sell them to people like u buy pre p...

Zapnologica

Here are some crazy ideas/ features that i have thought that mikrotik have needed in the past and some brainstormed ones: Don't tune me and rip them off, im just throwing some ideas out there, If they dumb then don't use them. 1> Add a option in user manager when adding a user to set the time period...

Zapnologica

Good day, I am looking at the possibility of starting a wisp in a small town down on the coast, but every thing there rusts from the salt in the air? How long will my mikrotik Routerboards last? and how can i stop them from rusting? I have seen a router board that was so rusted its not even a joke. ...

Zapnologica

i followed the instructions on the website, it told me to download a whole lot of repository's and some worked and some failed?
Now it keeps bitching about the ones that failed.

Zapnologica

Qrap

Opensource radio planning tool, useful for many radio applications and wifi links

http://www.qrap.org.za/

hope this helps

I installed Ubuntu and had no luck installing it

it poped up with errors every where saying cant install package.

Its a pitty cause it looked really good.

Zapnologica

and while we talking about odd software, dono if u know of any programs that do this; i was thinking most clients are so clueless and it takes 20min on the phone to find out where the problem is: I want a program that runs as a service and when the user click on the icon it pops up and there are lik...

Zapnologica

and while we talking about odd software, dono if u know of any programs that do this; i was thinking most clients are so clueless and it takes 20min on the phone to find out where the problem is: I want a program that runs as a service and when the user click on the icon it pops up and there are lik...

Zapnologica

yea its above ground.

well depends how far ur link is. 30m could miss out a big peak?

Zapnologica

yea it was at you,

I am busy install ubuntu now,

how would you do that?

Do u take the 2 points and then get the elevation at every meter and then plot a graph? Like a cross section kindoff?

Zapnologica

Well i used to use a local website that you entered in the long and lat, then u said how light the point was off the ground and u clicked calculate LOS> It was very nice but now they closed it down, Do u mean that u could make one similar to this that works as a website? Cause i like to use it when ...

Zapnologica

Hey, Does anyone know of a tool / utility / addon for google earth that allows you to put in the google earth co-ordinates of each tower and then it calculates a map for you like this: http://www.wug.za.net/newlos2.php?fl=18005&tl=18097 I have been looking for one for ages but i cant seem to fin...

Zapnologica

Looks like a really cool device,

Nice to have when u have that kinda cash to spend on it.

Zapnologica

Yea.

I see its not to complicated,

I have been playing around and editing other scripts,

Its act fairly simple, its just all the : ; / ]}) things that are not straight forward.

Zapnologica

i got the email:

So u saying i must not use tls.

I must use port 25?

Zapnologica

hey guys,

I wana learn how to write basic scripts for mikrotik,

Where can i go to learn? i looked on wiki, but the examples are abit complicated? is ther like a API

I know abit of java code? is there anyway to use diff language in the scripts?

Can any one set me in the right direction,

Thanks

Zapnologica

server: 209.85.229.109:587 from: "zapoelrouter" username: "router@zapotel.co.za" password: "urpassword" i used winbox and for server i typed in" smtp.gmail.com " and it resolved it by its self. This config works, but not with log, only with custom sent emails...

Zapnologica

i posted the logs in a post before,

thats where i figured out my problem,

If you look, i sent a email with console and it worked then the 2nd one is log trying to send a email, and it does not use tls

Zapnologica

Are you talking about "/system logging" and the "topics=e-mail" entry? That only puts e-mail server entries in the log. It doesn't email anything. Nope, that is what logs email entires, If u go System loggin actions u can add a new action, type email; u chose the to address. The...

Zapnologica

under system, logging you can add a log type called email, where it emails you the log, now when that log tries to email me, it is ov not adding the " tls=yes " at the end of the command. Any way i can do that? I think mikrotik needs to add it in v5 rOS, under tools e-mail u must choose en...

Zapnologica

Oh,

google must just change it then.

So now how do i set tls=yes like globaly,

Cause i cant do anything with email besides when i manualy type in to send a message,

cause it needs to say tls=yes, and when a log tries to send a email it dont do that.

Zapnologica

Well,

if i put "hello" in the from it still sends, no errors on router.

Comes into inbox from info@zapotel.co.za though not as "Hello" but no errors.

How do i set tls=yes for every thing?

Zapnologica

Ok, I found some thing odd, If i send a email from terminal it works, But when log tries to send a email it says: invalid FROM address but it works with terminal email? What could be the problem. I sent a email with terminal: and then made it do a email log: here is the log: 16:57:44 e-mail,debug re...

Zapnologica

any one know a script that can ping and if it fails 3 times it sends a email?

I want my router to email me when my main internet is down?

Zapnologica

wow,

i tried every possibily possible to man.

I was doing this in winbox.

If u put in smtp.gmail.com in smtp server field, it automatically resolves it for you. (where u would usualy put the ip)

Zapnologica

Well done u a star. Ok for your wiki, u must not give a ip. say put in " smtp.gmail.com" cause mine only worked when i did that, And it worked on port 587 which makes sense when u read the Google page: and the from field: <name> does not work <name@domain> does work anyname works and enabl...

Zapnologica

ok i will try both ports:

can i just clarify what ip to use for smtp server?

Zapnologica

Isnt there like just a open smtp server

that can send any thing:

and then it will just come through to my email from the name i put under from?

I just want it to email.
Does not have to email from gmail. I just want it to email to gmail.

Zapnologica

4.11 and yes: [admin@MikroTik] /tool e-mail> /tool e-mail send to=zapotechcomputers@zapotel.co .za subject="test" body="test" tls=yes Log Error: 15:16:01 system,e-mail,error Error sending e-mail: abnormal termination (timeout ) Email code: [admin@MikroTik] /tool e-mail> print ser...

Zapnologica

yea.

if i go to gmail.com

i can login with those.

I am using google apps as a mail server:

but now its giving the error;

SMTP server not ready

Zapnologica

Ok still not working: server: 74.125.91.109:465 from: "<info@zapotel.co.za>" username: "info@zapotel.co.za" password: "password" it says smtp server not ready: For the server i put in smtp.gmail.com and it dns'd it. I have a feeling thats the problem?

Zapnologica

Does it matter if it have to have the < > on ends?

Set your "from" email address to something sensible, but it does not need to be a real email address that exists,

thats also in the wiki?

Zapnologica

I been playing:

Can i make files and then add a filter that puts all logs from x.x.x.x to this file and then all the logs from x.x.x.y to this file?

Zapnologica

I already had a look at that? What must the smtp server address be? i put in smtp.gmail.com is that right? i have put in port 465 my user and password: Does From:" " make any difference? does it matter whats in there? to test the email i am tryping: /tool e-mail send to=info@zapotel.co.za ...

Zapnologica

Hi,

i am also having problems,

i have read this thread and it still dont work:

when i try send a email in log it says:

abnormal termination (timeout)

im in SA i dono if that makes a diff?

Zapnologica

Oh dose Dude do it>?

Thats cool then i use dude anyway.

Zapnologica

Hey guys, I am trying to setup my router so it can email me when things go wrong> do you know if i can use Gmail as my smtp cause it uses secure connection? I have setup with another email account: but when the RB logs, it says invalid TO address? do i have to do any thing special under logs where i...

Zapnologica

Does any one know of a Free Remote Log Server that i can use with my mikrotik RB's ?

Zapnologica

Ok, I have masquerade on the router, I have not put in any interface names ( so it should just do it on all and any of the interfaces that it needs too? I have googles dns server 8.8.8.8 in the mikrotik and all my clients use mikrotik as their dns server? The lan one does have a modem upstream. I se...

Zapnologica

i changed them to make more sense on the forum.

I just redid it, i delete the original config as it was not working.

Do you have a src-nat rule for each group specifying the outgoing interface?

Nope?
what am i meant to do with that?

Zapnologica

27 ;;; lan route mark chain=prerouting action=mark-routing new-routing-mark=lan passthrough=yes src-address-list=pack3 28 ;;; pppoe route mark chain=prerouting action=mark-routing new-routing-mark=pppoe passthrough=yes src-address-list=pack2 Skype still works though, not internet???

Zapnologica

I have 2 static routes:

lan : routemark:lan
pppoe: routemark:pppoe

peopel under pppoe get no internet?

Zapnologica

Hey guys, I have for a long time now been trying to get a good QoS system working on my mikrotik router @ home and work. I know how intimidating Mikrotik's seem when you are new to them, and some times u just want to get some thing working, and all every one says is, read this or read that, and it t...

Zapnologica

wat isp?

I had problems with my isp cause they used a special MRU and MTU:

Check up on those...

Those errors look really odd?
are you using the default pppoe profile?

Zapnologica

one is pppoe
and one is lan

not same isp

Zapnologica

hows it guys,

can some one please help me?

I am trying to add route marks to my internet route but when i do the internet does not work?

I am simple marking the routing mark from a ip list?

then u just put the route mark under your route?

Zapnologica

Thanks man. And i see what you saying about the crappy adsl companies. That act makes allot of sense. Cause in SA they do throtttle you, AND to me VoIP is of utmost important. So i think im gona try that idea of yours. with the rtp thing, that never gets marked? like under mangle when talking on the...

Zapnologica

Oh ok, thats what i have done: can u verify my setup: add name="Global_In" parent=global-in limit-at=0 priority=8 max-limit=0 burst-limit=0 burst-threshold=0 burst-time=0s add name="pop3-rx" parent=Global_In packet-mark=pop3-rx limit-at=0 queue=default priority=4 max-limit=0 burs...

Zapnologica

thanks for those.

I will have a read.

Oh was it a recent one that its not up yet? if you come accross it pls hook me up with the link. I would live to watch it.

Zapnologica

wow, whats with all the cantennas? do they act work? like really a grid is not that expensive? I also liked that grid made from wire mesh :) here are some pics of my Tree install :lol: It looks dodge, but it works perfectly, 100% water proof, has not gone down in hte last year :) check attachments: ...

Zapnologica

Yea, i was thinking about that, Cause currently i also set the speed limit in raduis, and that seems to work well. But from my understanding of using queue trees with pcq is that say there is only 2 users on line they get more than what they usualy would get??? So PCQ is a good thing if u can get it...

Zapnologica

Oh ok i see: That seems much better than simple queues. Thats act what i was trying to do in simple queue, I have constructed a nice queue tree now: lets see how it works. I wil do some testing? I have use PCQ in my tree? what does this do? is this normaly to make sure that one user does not hog the...

Zapnologica

Ok when i say it ont work, i mean: i set SIP as priority 1 and RDP as 2 and web as 4: now as far as i belive, if i am on web, and i make a VOIP call, it should allow all VOIP packets thoough before the WEB therfore no laag? but when i phone on VOIP and was on remote desktop, the voip call lagged lik...

Zapnologica

i have been playing around,

and the "forward mangles donot seem to work" ?

why would this be?

I tried create the ques on lan and that worked, but the prioriry does not work.

So i am trying to create the que on the wan interface?

Do u use forward for that?

Zapnologica

I did that,

I booted from ethernet, and then netinstalled the new firmware

and it seemes to work.

Thanks so much, I have learnt allot about the console, its quite easy, Im busy fixing an old rb111 that i found on a mountain somewhere, loading routeros on it again cause its key was lost.

Zapnologica

Ok, so i plugged my laptop into annother rb433 (working one) and if i wait the terminal comes up.

So that must mean the software on my one is fd?

And i cant upload new firmware?

Zapnologica

Ok if i dont push a button and just let it boot. it displays this: RouterBOOT booter 2.20 RouterBoard 433 CPU frequency: 300 MHz Memory size: 64 MB Press any key within 2 seconds to enter setup.. loading kernel from nand... OK setting up elf image... OK jumping to kernel code Starting... Starting se...

Zapnologica

Ok u right, haha K i been playing, turns out i have to reboot the router and only then will stuff display on the screen :) I get this : Press any key within 2 seconds to enter setup RouterBOOT-2.20 What do you want to configure? d - boot delay k - boot key s - serial console o - boot device u - cpu ...

Zapnologica

ok ok, i figured it out,

In putty i choes serial then chose com2 and click connect.

Its not working but i also noticed the light on the usb-com converter is not on?

When should this light come on? when u plug it in, or only once the connection is made?

Zapnologica

Oh ok thanks

I have putty and i have a usb to serial converter?

in putty what address do i put in there?

Zapnologica

I know u gona hate me for asking this,.

I have plugged in the serial cable, but now what?

Zapnologica

Hi there, I have a RB433 that stopped working. I find it very strange. if you put the power in, it boots up, (the lights flash and the speaker beeps) But once it is booted no network interfaces work. If u plug a lan cable into it, none of the lights turn on and i cant access the RB? What could be wr...

Zapnologica

Oh yes,

I remeber seeing that now.,
Thanks so much,

I dont really mind if u not meant to do it. its for home. as long as it works im happy.

Thanks i will give it a try.

Zapnologica

Yes they are:

one router, plugged into modem and switch ( all pc connect to the one switch and then intern the same router)

So u say it will just work?

Zapnologica

So in my case:

I wil want them to both be on the same IP range just there must be no duplicates?

then i go to routes and i say destination 192.168.1.0 ether1?

And it should work?

Zapnologica

Thank you very much:

That one post of yours has given me such a better understanding of the whole marking process:

Thank u so much.

Ur english was perfect, better than me and im english haha

Zapnologica

Oh ok sweet?

i dont care how its done as long as it works:

Can u tell me what i need to do?

Thanks

Zapnologica

So i cant make my pppoe clients talk to lan clients?

not with routes or any thing?

Zapnologica

So how can i "bridge" pppoe clients with network clients?

Zapnologica

Thank you very much :) that was very helpfull: So i could bond two ADSL lines together instead of using PPC? What method would you use for speed? I was reading the wiki last night there like 4 or 5, but im nto sure which one uses both interffaces ( liek the last scenario you mentioned when it divide...

Zapnologica

Hello again. Ok so i have been playing around wiht packet marking and i still cannot get download to work. Ok i used a simple one to test: i am just trying to mark tcp traffic on port 80 ( all web traffic) but in my cue it only has Upload and no download: So i created 2 mangle rules: 1: preroute tcp...

Zapnologica

Hi there, I currently have a Rb750 setup as a simple internet gateway and hub. Now what i want to know is: If i now connect a PPPoE client to that RB, will the pppoe client behave as if it was plugged into one of the ether ports with a cable? Cause i cannot bridge a dynamic enterface? I want to make...

Zapnologica

hey guys,

What the diff between bonding two connections and using PPC or routes?

Zapnologica

Ok i hae been playing around and i have realised that its only not working on the PPPOE accounts. IT works when ur gateway is ether2, but not when ur gateway is pppoe_1 Why is this? Im thinking maybe the "prerouting" function is not catching the pppoe traffic as pppoe enterfaces may inter ...

Zapnologica

Hi guys, I am trying to let half my computers use one gateway and th other half annother gateway, I read the wiki and a few how to's and it seemed pretty simple. but mine is not working. I have gateway 1,2 then i created a ip list with all the ips i want to go through one gateway and all the ips for...

Zapnologica

THANK YOU SOOO MUCH,

I have been looking for a QOS setup for ages as i run VOIP on my network.

I will try it this afternoon,

Zapnologica

Or, can some one help me wright a script that sets webcahse1 (usb1) to active

then i can run it every 30min??

Zapnologica

Hi there? Is there any way to turn off the store setting when it sets the web-cache to system drive when the usb drive fails? I would rather it just not work untill the usb drive it working again? I have a 80gb 2.5" plugged in via uSB for cache and i looked today and its runnig on the system dr...

Zapnologica

U had me fooled there for a moment, i 1st thought it was father xmas... haha

Zapnologica

Its the dog with normises face

Zapnologica

LOL @ ur avatar.

are u talking with mangle or queues?

Zapnologica

Oh ok, i see.

Thanks

Zapnologica

You dont know of any script that can jsut check if a PPPoE connection is conneted or not? (if it has that 'R' on the left of its name)

and then email me once it is dissconnected for more than 10min and then again when it comes on line?

Zapnologica

Oh i see.

So keep what i have for UPLOAD

and then create new ones for dst address with postrouting?

Thanks my man,

I thought it had some thing to do with NAT

and must passthrough be clicked?

Zapnologica

ip firewall mangle add action=mark-packet chain=prerouting comment=Howard disabled=no \ new-packet-mark=Howard passthrough=yes port=80 protocol=tcp \ src-address-list=Howard add action=mark-packet chain=prerouting comment=Hyslop disabled=no \ new-packet-mark=Hyslop passthrough=yes port=80 protocol=t...

Zapnologica

Sorry,

I forgot what i type in terminal to get the config for that?

Soz

Zapnologica

I was bust playign with ques yesterday and i noticed some thing.

I am trying to mark packets under mangle in firewall.

I am marking them by src IP LISt.
but it only mangle the computer UPLOAD and not the download?

So i tried dst address list and that didnt mark anything?

What am i doing wrong?

Zapnologica

Hi,

Can the lan users then access the pc being the PPPoE?

if i have a rb750 and all ports are swiched and then i have a few clients conencted via PPPoE.

How can i set it up so that the computers on the ethernet interface can access the computers on the PPPoE server interface

Zapnologica

Hi there,

I am looking for scripts or ways to to backuing up UM database and to automaticalu reset user counters at the begginging of every month?

thanks

Zapnologica

Could it not be that their Old connection was not termintaed and its still running while the client has created a new session?

Cause in the network every device has its own account, so its not connecting from 2 places???

Zapnologica

Thanks i will give it a try and let u know.

Zapnologica

Oh ok i see.

So then ether 2 must just have a ip address on it and that it???

Zapnologica

Oh ok i see.

So then ether 2 must just have a ip address on it and that it???

Zapnologica

Is that not only for http services?

Will the PPPoE clients also be able to access it?

And then do i need any routes or any thing setup?

Zapnologica

Hi there. here is a simple network diagram of what i am trying to do here. ether 1 goes to my modem, ether 2 (192.168.1.0/24 range) goes to a switch with my PBX, NAS, and web server ( these need to have open access to the internet(as if it was a normal home network) Ether 3 (10.5.50.0/24 , 192.168.1...

Zapnologica

HI there, I have been running userman with PPPoE for a few months now. I just have 2 users that use it. What i have noticed is that if i log into userman it says active users: 2 and then active connections :6 Why are there so many connections? To me there should only be 2 connections? What have i se...

Zapnologica

Hi there, There is somethign that i have noticed on 4 of my RouterBoards. I have set them all up as NTP clients and if i go to system/clock it shows the right time. But if i go look at web proxy cache the times are wrong there? Why would this be? i find it very odd. and each RB is off by a different...

Zapnologica

May you explain to me the difference between Queue Type: default / default-small cause it is default-small as default setting but then it dont show statistics or any thing under the que, but then if i change it to default it does. Can some ones lease simple point out the difference between the 2 or ...

Zapnologica

Oh i see.

Ha ha, its a good marketing gimmic, thats like the reason i bought the board.

I foudn with v5 that it was unable to format drives? I had to load 4.11 back on to format my flash drives.

One cool thing i tried which worked was plugging in a 4 port usb hub with 4 flash drives.

Zapnologica

I do,

I fiddle loads, All the time, I spend many nights playing with the dam things for hours on end. I just like some forum assitance when i get stuck while playing. I allways play then look on wiki then as on forum.

And i do want to go on course, i just cant.

Zapnologica

haha.

Oh i see.

that sucks, so how do u know before u buy a SD?

could it have anything to do wiht ros v5?

Zapnologica

I just got the rb 433uah

and i am trying to get the microsd card to work and it wont,

It just does not show up. I go to system/stores and it only shows my flash drive and the onboard memory.
Do i have to enable the microsd card slot or something?

Zapnologica

Oh thanks,

Yea i agree, Queues are mind boggaling, you can do it so so many differnt ways and each one is better than the other.

It would be good to hear some oppiniouns and advice on each different setup. Cause the wiki dont really give you that.

Zapnologica

Oh ok, No i see; K one question, i was looking at the wiki aand i couldnt quete make it out. Say i want to que voip, http and p2p on my internet connection: cant i create a master simple que, where i limit the traffic to my internet speed (upload and downlaod) and then make the voip,web,p2p ques its...

Zapnologica

oh thanks,

I cant belive i have never seen that before ????

Zapnologica

Hi, Is it possible to like see which ips are using the internet. Say for a simple office setup. all the computers are on a dhcp and no fancy settings. Just normal NAt router. Reason im asking is: the otherday i was using the net. and i loged into the router and the internet usage was like full. and ...

Zapnologica

Yea.

Well i finnish school next year.

So thats deff on my list of things to do.

Zapnologica

But i live in SA.

Thats not gona work.

Zapnologica

oh ok.

You booked yourself on a Free MUM yet ?

http://mum.mikrotik.com/2010/US/info
that right place?

But dont you act have to go some where or is it online?

Zapnologica

Oh ok, I see. So its not just a simple little precedure. Its silly that its defaulted to 8. Cause then making a queue that makes p2p 8 wont make it any faster than any other traffic. It should be defaulted at 4 ???? cant you make a cue that sets every thing to 4. So like mark ever packet, then the c...

Zapnologica

However, the MetaRouter + OpenwRT works as a webserver on a Mikrotik, as well as it doing the routing.

Thanks,

I will have a look at that.

Zapnologica

under firewall NAT,

Add new NAT rule.

action: masquerade
under general put in source ip: (192.168.1.0/24 if your computers are on that range)

but from your specs givin it looks like you have 2 different ip ranges accesing the router?

or is eth1 local and eth2 WAN ?

Zapnologica

Hey, I am just wanting to know how ROS deals with queues, esp ons that overlap if you know what i mean. So say you have a simple que limiting all traffic from the iprange 192.168.1.0/24 to 128kbps up& down. then below you have a que that is giving VoIP traffic full access with a priority of 2. N...

Zapnologica

I would really love to. I hate asking all these dumb questions on the forum. But im at school and all the courses are like a week long and i cant go to them? And i was not asking you that cause i dindt know it, i was just check that my theory was right. But i think its best that i just ditch this wh...

Zapnologica

Oh ok,

So the ones in that tutorial wont like hault opperation.

Thanks

Zapnologica

That worked.

Thank you very much. That saved me allot of trouble.

Zapnologica

Oh ok i see.

i i must make in interface my pppoe client connection>

Zapnologica

Hey, I have setup a dstnat rule in my firewall that allows me to connect to my server via remtoe desktop from the internet. But what i have noticed is that rule is allso being applied to traffic coming from behind the router (which it should i guess unless told otherwise) So if i try connect to anno...

Zapnologica

thanks for that,

But just a question?

Does adding somany firewall rules, filters and mangles not slow down your router allot?

Cause i have added a few mangles and the cpu usage seems to be allot higher?

Zapnologica

Oh thanks for that. it does not sound TOOOO complicated. I will deff give it a try, i just need to get a rb that is am not using incase i stuff it up. And to Fewi, I see your logic and i tend to agree with you. Lots of little devices. when one breaks only one servis goes down. But when you say route...

Zapnologica

To day i was looking at my log and i saw lots of red entries saying that.

Authentication failer to ftp: and some IP address.

This means that some one was trying to access my RB ftp server from the net?

How can i prevent people from accessing system services like that?

Zapnologica

Thanks,

I will do some reasearch on that,

Can u load any os on there? or only openWRT ?

Cause if u got a rb1000 that is powerfull.

And its not got hectic traffic on the webserver. why not use it?

Zapnologica

Can the ubnt powerstation be a web server?

Zapnologica

hi there, I am planning on intergrating VoIP into my WISP. There will be internal VoIP traffic and External ( PBX with adsl SIP account) What i want to know is: Do i need queues on each device? OR will i be fine with just having queues on the main router? What do i que the voip by? ip of pbx or by p...

Zapnologica

i tried that script. but it dont work. im using dyndns.org and on other routers they have: username: password: domain: so here i would put "camelotmining" host: and here i would put "dyndns.org" in the script below it combines host and domain? global ddnsuser \"*******\"...

Zapnologica

k well. I have my router with pppoe server and userman on, My internet connection plugs into that. Then from that router, i have wireless brige (wds) to a tower with 3 sectors. The clients then connect to those sectors with ubiquity CPE with the pppoe username and pasword in there. So in terms of th...

Zapnologica

but with hot spot you can?

Zapnologica

only if u using hotspot?

if MY users are using PPPoE >

Cant i create a folder under hotspot called. SUPPORT

Then under there put all my .pdf files.

Then they just go 192.168.1.1/support

Zapnologica

yea, i know how to do it on a pc. I just though these mikrotik routers would be able to do it aswell. I think they should make a webserver function. I meant they have ftp, web server for hot spot & userman, Like im not talking huge forums running php with data base. But it would be nice to store...

Zapnologica

The short answer: no.

That sucks.

Zapnologica

hey, If i have ether1 and wlan1 bridged. Can i still put PPPoE server and nat on ether 1. Reason is. ether 1 is the clients house, and the wifi conencts the house to my house, but hte mikrotik is also his router, so on ether 1 is a adsl modem and hub. So i want ether1 to be router and also be bridge...

Zapnologica

Yea it will probably only support HTML.

but if it can be done with hot spot. it should be doable ?

Zapnologica

Look Zapa: It's a router. How much do you want it to do ?. AS much as it possibly can! This is not just a router, Its a mikrotik one, they do every thing[*] More important : how much will you pay ? Nothing, thats why i want to do it on the mikrotik that i currently have, Yes you can just get apache...

Zapnologica

How can i setup a web server on Mikrotik router.

I want to upload the html files and then be able to acces the website.

like how u go. 192.168.1.1/userman

i wana go 192.168.1.1/forum or /site and it must load my site

Can i do this? Im sure its possible. if it does it for hotspot.

Zapnologica

Userman :

So is that whole tree leaf thing under Queues? How do i go about setting it up?

Zapnologica

So there is no way to just block them from the net, but still have access to the internal network?

Cause then also its gona fill up your hard drive with log files saying failed to connect.

Zapnologica

Oh i see.

So i would have 4 leaves right?

What routing process or thingy must i use to implament that? Can u give me a wiki link? So i can try and battle it out.

Thanks

Zapnologica

Oh

Well thats good. So it wont effect websites. Only like files like .pdf and .doc files.

Well im very glad to hear that. Thanks for telling me that.

Zapnologica

Well im glad to hear that. Cause i like proxies and what they can do. But ii used to run IPCOP and it has proxy and it cause MAJOUR problems. I couldnt use facebook, all anti virus updates never worked and every thing was out of date. How much cache would you recomend for about 40 internet users? I ...

Zapnologica

Im pretty sure it is the proxy? Last night on my pc i was trying to download a 2mb pdf file from the net. and IE froze and it was like half done. So i rebooted and tried again. wouldnt download. So i cleared the web cache on my pc and tried again and it didnt work. So i then deleted the proxy cache ...

Search found 594 matches