MikroTik

cbrown

You are probably looking for bonding to increase the "sum" of your bandwidth. You will have to work with each provider to do that. You could do some simple load balancing to share the use of each connection.

http://wiki.mikrotik.com/wiki/Manual:PCC

cbrown

Why are you using WDS with so many connections? With WDS your bandwidth gets divided by how many WDS clients are connected. There might be a better way to achieve your goal.

cbrown

At that distance with NLOS I don't think it is going to work.

cbrown

Try putting the VLAN on the bridge ether1 is in instead of directly on ether1.

cbrown

If there is not enough space after removing files you are prob going to have to Netinstall your board to get the space freed up. I have only seen this on boards where the dude was or had been installed and the logs had eaten up all of the space.

cbrown

Try plugging directly into your laptop and see if you can connect it via mac address.

cbrown

Did you install the dude package on this box?

cbrown

can you drag and drop files
have you tried to upgrade your wine?

Does it really work? What version of wine are you using?

cbrown

need to be stable and will never be a problem. Haha, isn't this always the goal. The best place to start reading would be the wiki. Also check out simple queues. This is where I would recommend doing your throttling with such few customers. http://wiki.mikrotik.com http://wiki.mikrotik.com/wiki/Man...

cbrown

Look at podio and tigerpaw. We use podio because it is very flexible and it integrates with our google apps.

cbrown

What does the CLI say on your X86? Did your trial license expire?

cbrown

The only time our boards get rebooted are when they get upgraded. What is the logic of not rebooting will damage the board?

cbrown

I think many people would like to see Mikrotik have bigger switches. Hopefully they will come out with something soon.

cbrown

Are you trying to connect through the hotspot to your routeros install?

cbrown

I would say you messed up your HTML. Reset your HTML and then see if it works.

cbrown

thanks a lot! in Mountain Lion X11 is droped, and wine not run for now... this version of winbox for mac run very well!! You can download X11 for mountain lion. I prefer using wine or crossover because I can open multiple boxes. I have not tried a new bottled version for a while, can you open multi...

cbrown

Have you tried connecting to the hotspot and using it as the end user would?

cbrown

Post /export compact

cbrown

Same here. I haven't had any problems running in various applications.

cbrown

Have you created a hotspot in /ip hotspot ?

cbrown

Are you using a custom branding package?

cbrown

What are you trying to accomplish with your firewall? Are you trying to protect the customers and the router or just the router itself?

cbrown

It sounds like you have the right idea. You might also want to look at route distance.

http://wiki.mikrotik.com/wiki/Manual:IP/Route

cbrown

You will probably have more luck in the DDWRT forums.

Why do you not want to use RouterOS?

cbrown

You could do it with the /ip dns. Redirect all DNS traffic to the router then set a static entry in the /ip dns. /ip fi nat add action=redirect chain=dstnat dst-port=53 protocol=udp to-ports=53 add action=redirect chain=dstnat dst-port=53 protocol=tcp to-ports=53 /ip dns set allow-remote-requests=ye...

cbrown

I replied to your other post. Please don't double post.

http://forum.mikrotik.com/viewtopic.php?f=2&t=63903

cbrown

You are getting the firmware and the RouterOS software mixed up. For the firmware version 2.41 for the Groove is the most recent and for the RouterOS software version 5.19 is the most recent.

cbrown

Which port are you plugged into? It might have the default config now and you will need to be in port 2-4 because port 1 is blocked by the firewall.

cbrown

You have to send some data over the tunnel for the IPSec to initiate. Try to ping from one side to the other and then you should see the IPSec come up if you have done it right.

cbrown

You probably need to set ARP to proxy-arp on your LAN interface.

cbrown

Try policy routing.

http://wiki.mikrotik.com/wiki/Manual:PCC#Policy_routing

cbrown

What error is your FTP client giving?

cbrown

Yep and you will run your DHCP on the bridge. You don't have to set the master mac for ether3. You could leave it blank and it will select its own.

cbrown

No it is not a limitation of the device it is a limitation of wireless. Putting three cards in one device operating in the same band will actually cause you more problems because of interference.

cbrown

Use the serial port if your router has one.

cbrown

You could put all of the vlans on the
Mikrotik then bridge them together and run the hotspot on that bridge interface.

cbrown

Also, why are you using 2ghz-B?

cbrown

Yea they are sufficient for a home router.

cbrown

Or better said, how many users i can handly with a mikrotik ap (2,4groove & omnitik?)

I wouldn't go anymore than 20 to 30 per AP.

cbrown

Use the /system schdeuler to run /system reboot

Just curious, why do you want to do this?

cbrown

I glanced over them and they look fine. Did you have a problem with them?

cbrown

Check out routerboard.com. The throughput numbers are on the bottom of each router page.

cbrown

Unless you are using metarouters or are pulling large bgp tables the RAM usage will be next to nothing.

cbrown

I think either a 450G or 2011L would be just fine. If you want to have something a little bigger incase you decide to do QoS or something later I would go with the RB1200 or RB1100AH.

cbrown

Ok, still post /interface wireless export compact

cbrown

Nope, you can bridge the master ports together.

cbrown

http://forum.mikrotik.com/viewtopic.php?f=3&t=63770

cbrown

I answered your other post. Please don't double post.

http://forum.mikrotik.com/viewtopic.php?f=13&t=63763

cbrown

Switching the ports together is best but you won't be able to switch 4-13 together, they aren't in the same switch group. You can do 1-5 and 6-10.

http://wiki.mikrotik.com/wiki/Manual:Sw ... p_Features

cbrown

I think the either the 450G or 2011L would do fine.

cbrown

Is this for a point-to-point or just an AP? Please post /interface wireless export compact

cbrown

Try some of the consultants.

http://www.mikrotik.com/consultants.html

cbrown

Setup the hotspot on the vlans and then on the Ubnt add the vlan and bridge it with the wlan interface.

Is this what you were looking for or am I misunderstanding?

cbrown

How did you delete the login page? Are you talking about the Hotspot login page?

cbrown

Are you running your DHCP server on one of the ports or the bridge. You will have to run your DHCP server on the bridge itself and not one of the ports in the bridge.

cbrown

Did your hotspot pool run out of IP addresses?

cbrown

You need to setup your SNTP client and set your time zone.

http://wiki.mikrotik.com/wiki/Manual:System/Time

cbrown

Yea you are going to have to do a netinstall.

cbrown

You could do it like this. add action=dst-nat chain=dstnat dst-port=53 in-interface=LAN1 protocol=udp \ to-addresses=8.8.8.8 add action=dst-nat chain=dstnat dst-port=53 in-interface=LAN1 protocol=tcp \ to-addresses=8.8.8.8 add action=dst-nat chain=dstnat dst-port=53 in-interface=LAN2 protocol=udp \ ...

cbrown

Wireless is more of the limitation than the routerboard itself. I would say 30 to 40 max users per wireless card. CPU becomes important when the router has to process a lot of packets.

cbrown

There is no way to recover your password. If you have lost your password you will need to reset the router.

http://wiki.mikrotik.com/wiki/Manual:Password_reset

cbrown

Can the RB1200 handle this kind of traffic?

Yep.

cbrown

Create an L2TP or PPTP tunnel and use the tunnel to create your IPSec tunnel. The IPs of your tunnel will never change and you can create static policies.

http://wiki.mikrotik.com/wiki/L2TP_%2B_ ... ik_routers

cbrown

Do you have a masquerade rule? What is the output of /ip firewall nat export

cbrown

The default username is admin and there is no password, it is blank. If you have forgotten your password you will need to reset your router.

cbrown

The 751 only has one wireless card. It can't be in Station and AP-Bridge at the same time. You will either need a router with multiple wireless cards or just do a repeater with another 751.

http://wiki.mikrotik.com/wiki/Wireless_repeater

cbrown

You initially didn't say anything about IPSec in your first post. Here is the IPSec information.

http://wiki.mikrotik.com/wiki/Manual:IP ... n_Examples

cbrown

Have a look at this.

http://wiki.mikrotik.com/wiki/Manual:In ... 2TP_Client

cbrown

We have not had any problems with R52Hn either. They are a good choice.

cbrown

The wiki and forums along with trial and error is a great way to learn. You could also do some Mikrotik training.

http://www.mikrotik.com/training/

cbrown

Please post /ip service print /ip address print detail /ip route print detail /ip firewall export /interface print detail

cbrown

Please post /ip firewall export /ip address print detail /ip route print detail

cbrown

You should be going 32/0 - 32/31. Follow this example.

http://wiki.mikrotik.com/wiki/Manual:PCC

cbrown

You can contact some of these.

http://www.mikrotik.com/consultants.html

cbrown

Try this.

http://wiki.mikrotik.com/wiki/Manual:IP ... Sec_Tunnel

cbrown

What are you wanting to use the wireless for?

cbrown

No I don't think a 750GL is going to be enough. A bare minimum I would use a 450G but you should probably go with something like the RB1200 or RB1100AH.

cbrown

You need to use NAT.

http://wiki.mikrotik.com/wiki/Manual:IP ... nation_NAT

cbrown

Instead of setting up the load balancing for the ethernet interface like you did the others you will set it up on the VLAN interface.

cbrown

Try looking here.

http://wiki.mikrotik.com/wiki/Manual:IP/Address#Example
http://wiki.mikrotik.com/wiki/Manual:IP/Hotspot
http://wiki.mikrotik.com/wiki/Main_Page

cbrown

Fatal error 0x853
Please contact support@mikrotik.com

I would probably try contacting support.

The only other thing you could try is a netinstall.

http://wiki.mikrotik.com/wiki/Manual:Netinstall

cbrown

Try to netinstall it.

http://wiki.mikrotik.com/wiki/Manual:Netinstall

cbrown

I'm sorry I don't think I ever got an email about a reply on this thread. But yes you will need to setup dynamic dns and then setup PPTP.

http://wiki.mikrotik.com/wiki/Dynamic_D ... behind_NAT
http://wiki.mikrotik.com/wiki/Manual:In ... ote_Client

cbrown

I would say your config exported just fine. It sounds like it is trying to add/set an interface name that already exists. Have a look at /interface ethernet first and if you haven't made any changes to the interfaces you can remove that. Did you use /export compact or just regular /export?

cbrown

Hi all.

is it possible to purchase a licence and upgrade a RB411 to level4 ?

Thanks in advance

You can change it. It is technically not an "upgrade".

http://wiki.mikrotik.com/wiki/Manual:Li ... ense_Level

cbrown

Could you step your client through how to disable the firewall via webfig? Based off of the default configuration the WAN port is locked down and your not going to get through.

http://wiki.mikrotik.com/wiki/Manual:De ... igurations

cbrown

Im not sure I understand why you would want to do it but sure you can.

http://wiki.mikrotik.com/wiki/Manual:Interface/Bridge

What kind of problems are you having? Maybe we could help figure them out.

cbrown

It is in the ZIP download from Mikrotik which has all of the packages.

http://download2.mikrotik.com/all_packa ... e-5.17.zip

cbrown

http://www.wispforum.net/entry.php?5-Ho ... ode-Part-I

cbrown

I would not recommend using IPSec with the 700 series boards. You will not get anything near your 100mbit connection. Stick with PPTP or L2TP. If you need IPSec you should get two RB1100AHx2.

cbrown

Have a look at these.

http://wiki.mikrotik.com/wiki/VPN_(any_ ... _addresses
http://wiki.mikrotik.com/wiki/Manual:In ... -Site_PPTP
http://wiki.mikrotik.com/wiki/Manual:In ... -Site_L2TP

cbrown

Sure. Look at the "forwarding" option.

http://wiki.mikrotik.com/wiki/Manual:Interface/Wireless

cbrown

How is your CCQ? Are you interfering with yourself?

cbrown

Email support at support@mikrotik.com

cbrown

Have a look at this thread. You might be experiencing the same problem.

http://forum.mikrotik.com/viewtopic.php?f=7&t=60619

cbrown

For example if you are using winbox port 9900 then in the address box in winbox you would put 1.2.3.4:9900

cbrown

Don't know, I'm from the US. I'm sure they will have them them back in stock soon.

cbrown

You need to access the router with winbox via the selected winbox port in /ip service

Or am I misunderstanding?

cbrown

Here is a US vendor with pretty much the same thing.

http://www.balticnetworks.com/mikrotik- ... riple.html

cbrown

Has there been any update on this? Do you have an ETA of when we will be able to run metarouters?

cbrown

You need to do policy routing to send the LAN clients out the PPTP.

http://wiki.mikrotik.com/wiki/Manual:PCC#Policy_routing

cbrown

Look here.

http://forum.mikrotik.com/viewtopic.php?f=2&t=38941

cbrown

This should be what you are looking for.

http://wiki.mikrotik.com/wiki/Manual:IP ... Management

cbrown

Your masquerade rule is correct.

What subnet is the Groove connection to? Post /ip address print detail

cbrown

Please post /export compact

cbrown

haha, there is a normal power connector inside the case. I wish it was externally available but the one good thing about it being like it is is that it can't be accidentally unplugged.

I am still up in the air about it.

cbrown

Did you try the screw driver in the reset hole the same as you did the button by shorting it with the power off and leaving it shorted while you apply power? If you can't get either of the two reset options to work you could try to netinstall.

http://wiki.mikrotik.com/wiki/Manual:Netinstall

cbrown

Maybe this?

http://wiki.mikrotik.com/wiki/Manual:Up ... nse_issues

cbrown

Could you post /export compact instead of the supout?

cbrown

I agree.

+1

cbrown

I would do the RB1100ahx2 instead of multiple 493AHs. The setup would be less complicated and the most important part to me is you would have less points of failure. You could take the RB1100 out of its case and mount it in whatever you would like.

cbrown

Sure it would.

cbrown

With the ports bridged the router is doing nothing but act like a switch. You need to set it up to actually be a router.

http://wiki.mikrotik.com/wiki/How_to_Co ... _xDSL_Line
http://wiki.mikrotik.com/wiki/How_to_co ... ome_router

cbrown

Strange, I have not experienced this issue and we have many 450G boards out in the wild.

cbrown

Did you add a masquerade rule in /ip firewall nat?

cbrown

You just need to bridge the two interfaces together.

http://wiki.mikrotik.com/wiki/Manual:Interface/Bridge

cbrown

Why are you bridging your WAN and LAN connections?

cbrown

Could you post /user export

How are you trying to change your password (cli, winbox, webfig)?

cbrown

You could accept the traffic in mangle before it gets to the rules that mark packets for the queue tree. Or just give them another mark that doesn't go to the queue tree.

cbrown

Absolutely. A lot of people run RouterOS in VMware.

cbrown

Is your case waterproof? How is your board grounded?

cbrown

Are you using simple queue or queue tree?

cbrown

Do you have the 750 setup as a router or a switch?

cbrown

What wireless card are you using?

cbrown

Do you have a loop on your network, either on the MT or on the other side of the eoip tunnel?

cbrown

Good. Thanks for also coming back to post your solution.

cbrown

This is not going to work with both sites using the same subnet. Each site needs to be on a different subnet.

cbrown

You could use web proxy or hotspot.

http://wiki.mikrotik.com/wiki/Manual:IP/Proxy
http://wiki.mikrotik.com/wiki/How_to_ma ... _web_proxy
http://wiki.mikrotik.com/wiki/Manual:IP/Hotspot

cbrown

Are you going to have cable run to each AP?

cbrown

Have you tried adjusting the "Login-By" settings in /ip hotspot profile? Try removing mac and cookie.

cbrown

This is easy way, I like this. but my friends recommended me queue trees.

Queue tree's are also easy if setup properly.

cbrown

If you are trying to connect to the web interface port 80 may be blocked by your provider. Are you trying winbox or webfig?

cbrown

Does No-IP show the public IP of your router?

cbrown

touche

cbrown

Did the script run properly and update No-IP? Also, can you post /ip firewall export

cbrown

From Winbox you will type in the domain you created with No-IP. That should take you directly to the public IP of your router.

cbrown

DNS o Matic does.

Here is a new one that is for No-IP
http://forum.mikrotik.com/viewtopic.php?f=9&t=62196

cbrown

Could you post /radius export?

cbrown

First you will need to do this so you can get to the router.

http://wiki.mikrotik.com/wiki/Dynamic_D ... behind_NAT

Where you wanting to access things behind the router or the router itself?

cbrown

Are you using queue tree or simple queues?

cbrown

Do you have a public IP on your router? If you do is it static?

cbrown

What do you mean it "doesn't work"? Could you give us some details.

cbrown

I don't understand what you are asking. Can you try again?

cbrown

Look at this post.

http://forum.mikrotik.com/viewtopic.php ... 62#p264462

cbrown

It would be nice to be able to export a torch.

cbrown

I am pretty sure you can also get the password out of routerboard backup files with a certain tool. I thought I had saw something about this somewhere but I can't seem to find it again.

I guess that is a good thing

cbrown

What router are you using and how much bandwidth is going through it?

cbrown

Do i need for connecting 2 SXT's to the OmniTIK 2 wlan entries in the Wireless menu? or is one enough for booth SXT's? even if there are in bridge mode?

Are you asking if another wireless interface should appear? No, you can see connected clients under the registration tab.

cbrown

I've taken the MT POE unit out of the casing, and are mounting them together with my RB into outdoor cases - works fine so far.

Not a bad idea.

cbrown

This could be achieved with policy routing.

http://wiki.mikrotik.com/wiki/Manual:PCC#Policy_routing

cbrown

Have a look at this.

http://wiki.mikrotik.com/wiki/Wireless_repeater

cbrown

Do you have a DHCP server on your OmniTik?

cbrown

Look here.

http://wiki.mikrotik.com/wiki/Manual:Flashfig

cbrown

I mean about backup/restore, this feature is very useful and I use it all the time for the 750 serie, do a backup then use the same file for all new routers. But with the wireless (RB951), I have to use manually the export command just for the Wireless options ("restore" stay the same for...

cbrown

I finally broke a plastic one trying to get the damn thing unplugged. It is really good to hear Mikrotik has made them metal again and flipped them over. I think the flip is just as important if not more important than it being metal.

cbrown

No problem. I think I have run into the same issue with dynamic WDS being weird. I just like to do things static when they are fixed.

cbrown

Replace the in-interface with your WAN interface.

/ip firewall filter
add action=drop chain=input dst-port=53 in-interface=ether5 protocol=udp
add action=drop chain=input dst-port=53 in-interface=ether5 protocol=tcp

cbrown

If I understand correctly you just need to bridge ports 1-5 together with the wlan inteface.

cbrown

That is what the firewall is blocking with this rule, everything going to the router via ether1. add action=drop chain=input comment="default configuration" disabled=no \ in-interface=ether1-gateway The other rules allow ping, established, and related connections. You could always add an a...

cbrown

You can get the md5 from the Mikrotik download page. RouterOS also verifies the package before upgrading.

cbrown

You are also running version 5.4. There have been many wireless upgrades since then you should upgrade.

cbrown

This will remove your firewall and your problem. Now be sure to create your own firewall to protect your router.

/ip firewall filter remove [/ip firewall filter find]

http://wiki.mikrotik.com/wiki/Securing_your_router
http://wiki.mikrotik.com/wiki/Securing_ ... rOs_Router

cbrown

No you don't need another radio or Virtual AP. You are trying to over complicate it. The other radio in the tutorial is for a backhaul to the first tower. You need to have both routers on AP Bridge with the same SSID, encryption, and frequency. Then you need to create a bridge on each router and put...

cbrown

Post /ip firewall export and /ip service print

cbrown

I can't acces to my Omnitik using Ethernet-1 only.
How can i do this? Do i need another Configuration?

You can or you can't? Check the default firewall in /ip firewall filter and also check /ip service

cbrown

This describes the wireless modes. What are you trying to do with your wireless?

http://wiki.mikrotik.com/wiki/Manual:Wi ... tion_Modes

cbrown

but we do plan to release a new version in 2-3 months.

That works too. Thanks!

cbrown

What exactly is not working? Did you remember to add a default route and masquerade your WAN interface?

cbrown

Can you post /ip firewall export /ip address print detail /ip route print detail

cbrown

Try this instead.

http://wiki.mikrotik.com/wiki/Manual:PCC#Policy_routing

cbrown

I am not sure I have seen anything for this setup. I am sure someone has done something but I couldn't find it either. Anyway, it should really be almost the same as your last setup but instead of using bridge on the omnitik use ap-bridge and for the SXTs use station-bridge. Here is a simple page on...

cbrown

Interesting idea. We would definitely pay for it as I am sure many others would too.

cbrown

Please read the link I sent you again. You do not need two radios to do a repeater. Also, with one radio you have to use AP-Bridge because you can't have the radio in two different modes (WDS-Station and AP-Bridge). This is the part you want to look at. / interface wireless set wlan2 disabled=no mod...

cbrown

Have you connected a serial cable and seen what the router has to say?

cbrown

I'm not sure if you have seen this one but follow it. It does work.

http://wiki.mikrotik.com/wiki/Wireless_repeater

cbrown

They should both be configured in AP-Bridge with dynamic WDS. Did you try that?

cbrown

Also be sure "allow remote requests" is enabled in /ip dns

cbrown

It might be good to know some more details for what you are trying to do What are you trying to use hotspot for? What is your over goal?

cbrown

It does come configured for SOHO with wireless and now with the new quickset it is pretty easy for anyone to setup a basic router. This link might also help.

http://wiki.mikrotik.com/wiki/Manual:De ... igurations

cbrown

Do you have the dude installed on your router?

cbrown

You could try a bigger power supply of you have one available.

cbrown

http://forum.mikrotik.com/viewtopic.php?f=2&t=26609

cbrown

Do you have any static public addresses or are you dynamic?

cbrown

cbrown

Your signal strength is a bit high. You might want to turn it down a little bit if you can.

cbrown

You would have to do it with your 3G modem. But you could do it like we do and send an email to your phone number and it will come to your phone as a text. Most providers do something like 1234567890@txt.att.net

cbrown

Have a look at these.

http://wiki.mikrotik.com/wiki/Manual:PCC
http://wiki.mikrotik.com/wiki/Two_gateways_failover

cbrown

Any news on Ticket#2012030866000601? I don't know if it is related to the RouterOS version or not.

cbrown

Please post /interface export /ip address print detail /ip route print detail

cbrown

Thats kind of like asking how many fish are in the sea. Almost every routerboard sold has the potential to be a hotspot and I couldn't even begin to guess a number. I would go off the basis that most of the major Radius solutions support Mikrotik for a reason. How to close to complete are you with y...

cbrown

Sure it can be done.

http://wiki.mikrotik.com/wiki/TransparentTrafficShaper
http://mum.mikrotik.com/presentations/U ... -megis.pdf
http://mum.mikrotik.com/presentations/U ... is_qos.pdf
http://wiki.mikrotik.com/wiki/NetworkPr ... of_Service

cbrown

Wouldn't you want to go netequalizer-->RB1100-->switch-->ap?

cbrown

A bunch. You would be crazy not to support it.

cbrown

I have establish a campus Wifi using 6 nos RB433ah(Dual Wireless Card) along with 6 sector antenna.

Self interference could be a problem if using the same band on the same board. Also, are there wired connections between the AP's or have you setup WDS?

cbrown

Did you try something like 192.168.88.1:8292

cbrown

This could be a bug with quickset. You might want to email support at support@mikrotik.com.

Edit: correct email address

cbrown

I agree, it sounds like you are running out of bandwidth.

cbrown

Have you tried using winbox or webfig to change the frequency without quickset in /interface wireless?

cbrown

I am also interested.

cbrown

Your right, the flashing lights was a problem that has nothing to do with this mod and we have a few routers that had it. One way we got ours back on temporarily was to use a 24v 1 amp power supply and they started working again. This is NOT a fix and not a solution for the problem but until we got ...

Search found 1833 matches