MikroTik

The password is unique and random, but we do have it in a database in readable form (I mean, this is still better than blank). You can't guess it, but you will need to change it anyway.

We will make a few videos about it

Better prepare in advance, than suffer when it's too late. Imagine even if there is no legislation. How about just for sake of basic security? A scenario where you purchase a device that has nice default config. You plug in your ISP and your internet works (because DHCP client and default NAT, you d...

Your SSH script will simply have to be modified to use netinstall-cli command line interface that reinstalls the device and applies your custom config. It is a change, but not that drastic

Also UK has something similar, and basically everywhere the governments are working on ways to improve security: https://techcrunch.com/2018/10/05/california-passes-law-that-bans-default-passwords-in-connected-devices/?guccounter=1 https://www.bbc.com/news/technology-59400762 https://www.lexology.co...

how about "wine64 winbox64.exe" ?

Read our latest newsletter and learn more about: - the most anticipated spring devices: cAP ax and the outdoor RB5009; - upcoming Train the Trainer classes - new regulations on default passwords - your MikroTik setup submissions - latest MikroTips videos - wAP LTE kit & Aerones wind turbine care...

It is safe. It will avoid radar channels so that no scanning is needed.

opposite. skip-dfs-channels=all

Did you upgrade manually by single packages? The you forgot wifiwave2.npk package
Normally you should upgrade with "check for updates" button and this won't happen.

Please don't make a fuss about something so irrelevant. ChatGPT can't make ROS scripts and nobody will post them.

You can stop dreaming, like it was already said multiple times, ww2 package uses stock driver, which is very large. We can't and wont take it apart, it would render useless our efforts to make stock qualcomm driver work in ROS. that was the whole point, take the driver and use it.

Packages = bad, because some people learn that using any kind of pre-packaged winbox is fine, and then get it from somewhere else, which includes unexpected bonuses inside. So the less unknown factors, the better. Official Wine64 from official repository + Official Winbox64 from official webpage. No...

MikroTik is working on mDNS repeater, but that will come together with a global DNS overhaul and it will be an improvement in all areas, not just this one. This is also why it takes some time to make.

We have no plans to add these features to old chipsets. Only ww2 package gets regular updates to newer standards and features

Zandhaas that is not what I was getting at.
I simply meant “if you are afraid of 7.9, you should also be afraid of packages it consists of”. Pure logic

This question is so strange

If you need the changes in that version, just use that version. Why does the version number matter? It is just a number. You are afraid of "beta", because unstable? WELLL Zerotier 1.10.3 is also unstable just the same

What about all your posts that have helped somebody or have been involved in a discussion?
I see what caused your post. We will try to deal with that.

if you have multiple devices and need fast roaming, you need capsman. completely unrelated devices can't teach your client to roam.

When we upgraded to version 1.10.3 it was the latest one. We can't upgrade and release on the same day. We need to test it too

in capsman set these settings:
ft=yes. ft-over-ds=yes

cAP is not really intended as the "only router in your house", but sure, you can use it for that.
But normally I would suggest hAP in such a case. cAP is more for large networks and CAPsMAN.

Roaming between devices is already supported, if you use CAPsMAN.
For a client device to successfully roam between 2 APs, the APs need to be managed by the same instance of RouterOS. For information on how to centrally manage multiple APs, see CAPsMAN manual

Development never stops, we are constantly working on improvements and updates in all areas.

If you go to our documentation:
https://help.mikrotik.com/docs/display/ROS/WifiWave2

cAP XL and cAP AX have completely different enclosures, carl0s

Sorry to say, but the above response was from a spam account using chatGPT to generate responses

Go to Wireless menu, then click Access List tab

I repeat once again.
Please check walled garden. Many of you put some apple domains in there for no reason, other than you copied somebody elses broken config.

mkx which threads are you referring to? AFAIK hAP ax2 works like a charm. I use it personally too. If you have no specific report made, don't spread such false info then.

Do not download unknown Winbox installers from github or elsewhere. macOS ventura and newer will run winbox64.exe with simple official wine64 installer: STEP 1: install this: https://github.com/Gcenx/macOS_Wine_builds/releases/download/8.3/wine-devel-8.3-osx64.tar.xz STEP 2: open winbox64.exe with w...

works with Ventura 13.3

Screenshot 2023-03-21 at 16.40.57.png

BartoszP you are distracted from the main question. Why even recommend OpenVPN in this particular case? There are easier solutions.

Good eye you both. It was indeed a spammer.

ChatGPT is not an encyclopedia, it is a conversation bot. It has no knowledge, it invents stuff, for conversation purposes.

The first and most obvious thing to note - you have administrative ports open to untrusted networks. This is not good.

802.11k is supported in wifiwave2.
the other one are coming too.

The CPE mode is meant for outdor devices that are sold as CPE, you can't really adapt the other quickset modes to other types of devices. If it's a "HomeAP" it can only use "HomeAP" mode etc. You will have to leave quickset alone and go into the Wireless menu and set the 2GHz int...

Yes, it's already done in 7.9. It has the latest ZT version. Just a little bit until you can have the Beta

Don't you mean CFexpress, Jotne?

CF ? Does this standard still exist ?

Yes, break-off. But it can't be re-assembled, so - permanent.

I don't understand your hotspot idea

> Join wlan2 Open WiFi > Auto-login > redirect to web server connected to Ether2

isn't hotspot running in the router? what web server is that and why are you redirecting there? how are you doing the redirection ?

https://mt.lv/news111

Read our latest newsletter and learn more about:

-- New 100 Gigabit switches (indoor & outdoor!)
-- The RMK-2/10 rackmount accessory
-- Latest MikroTips videos
-- LtAP LTE6 setups in Austrian Wiener Lokalbahn trains
-- Our latest podcast with a MikroTik LEGEND, and more!

Yes, you can just use HotSpot with RADIUS CoA feature, to forcedly disconnect the user, when amount of X Gigabytes is exceeded. You will have to use a RADIUS server to keep your users. And it must have the CoA feature supported.

But why is this a problem? Even if your SystemID gets changed for any reason, the thing about CHR is that you can just re-assign the license to the new SystemID from your acocunt. License will not be lost.

accesspointkft you misunderstood me. you can post any videos about mikrotik, that's no issue. your channel is great.

i just tried to explain to you, that your original post are censored, because a moderator thought is is a spam post.

CSS610-8G dimensions were incorrect in our homepage, we fixed it now.

Also you might be interested in this accessory mentioned in the video: https://youtu.be/Zyw0HT7YEnM

works for me

If we delete your account, how can we tell you we have done it? We will no longer have your email

Shodan only sees your router if your firewall is not configured properly. Why is your SNMP exposed to internet at all?

Any self promotion is not really allowed.
I will allow it https://www.youtube.com/@AccessPoint_Kft

Yes, like Maigonis says, the only difference between "out of the box" and manual setup is that out of the box you have "AUTO" frequency. The AP scans the Country frequency range and chooses some free frequency. There is no other difference. Maybe a reboot would also force it to c...

OP, How are you testing the speed?

It actually works best if left at default settings, there is no need for a guide just to get it working, only for finetuning and custom setups.
What makes you say defaults are no good?

Also regulation

The sticker contains the password. Just write what is on it.

I can easily get 750Mbit over WiFi with Macbook Pro M1 Pro using the hAP ax2, so ax3 should be similar. Try other country setting, in case Ukraine has some limitations I don't know about, try other frequencies on 5GHz

Mikrotik does not maintain the TZ file, we just use it as it is.
There are two entries, for backwards compatibility (works like a shortcut to the other).
If you don't like this, you can report to IANA.

RIP works in v7 just the same as in v6. If something is not working for you, post your problem in more detail, or email support with supout.rif file

Like the above poster says, all modern operating systems do some checking in the background and can detect that there is a login page, and then show it.
So what specifically is not working for you since this change?

or maybe using 2.4GHz anywhere outside middle of desert ...

DO NOT USE ANY PACKAGES WITH WINBOX, this is dangerous. To use Winbox on Mac with M1/M2 processor you only need two things: 1) install Wine from here https://github.com/Gcenx/macOS_Wine_builds/releases/download/8.0/wine-stable-8.0-osx64.tar.xz 2) download winbox64.exe https://mt.lv/winbox64 3) open ...

We have tons of apple devices here, also in my house there are plenty, and I have never seen any of the mentioned issues. My suspicion is this could be related to your country/region? Also, some time ago there was an interesting bug with apple devices, that if you have another brand chinese wifi rou...

Where did you buy it? If it came from your ISP, they sometimes pre-configure it some other way. Then you must ask the seller / installer

If you are connected to it's wireless AP, or to the second port (that is the LAN port), just ssh to admin@192.168.88.1

Side note. If you have neighbors at all, you can't expect much from 2GHz

It means rule is turned off.
Not doing anything.

No, you can't.
You can set up a VPN server in your router and only access the service through the VPN.

Or maybe you could do this: https://youtu.be/BbDnBxlBTdY

Why are you trying to remove a queue that is added automatically? This is not a bug

Why are you using Webfig and not Winbox?

It is made by MikroTik

Make new thread, but also in it, include wireless config full output.

Please stick to topic, this is about newly announed hAP ax Lite, which is not shipping yet, and which is compatible with many kinds of USB 5V adapters, as long as they provide enough amps.

USB-C port is for power ONLY on hAP ax Lite.

Installing this module instead of the burnt out one allows you to change the power range to max 15V

I imagine this module is not for free? Is the added cost really worth it, instead of educating user to use included power adapter ?

The main risk is that authentication credentials can be read with passive eavesdropping, no need to intercept and modify packages. If data is sent over a hub or the admin is storing traffic headers for logging purposes, the password can land in unexpected places. WebFig over HTTP does some encryptio...

110_soctikliem.jpg Read our latest newsletter and learn more about: - the tiny, fast and affordable hAP ax lite - Q+31LC10D 100 Gbps modules - additional 5GHz frequency range options for 802.11ax - latest MikroTips videos - MikroTik guide to Latvia - your MikroTik setups Spotted In The Wild https:/...

Why not use Filter button?

Screenshot 2023-02-01 at 13.20.18.png

You can use Scheduler, that will monitor your wireless registration table, and if MAC is found, send you an email.
Some examples https://help.mikrotik.com/docs/display/ ... g+examples

Even easier on DO: https://youtu.be/ZjQL9z79Dy0

if your account had zero posts, it might be possible we removed it together with some spam accounts, as a precaution

There was a massive Bot attack that affected old forum accounts, your password was leaked somewhere else and bots used it to log in. They used your account to post spam. This is why your accounts were deleted. I think there were no other posts, accounts were not active before. I see you found the so...

I run the Cloudflare container on my hAP ax2 which is one of the lowest spec devices that can run containers, and well ...

Screenshot 2023-01-31 at 16.01.08.png

Yes, I say "most likely" becuse there are all kinds of adapters, and I can't give a simple method to to see which ones will work, like the poster above explains, USB things are not "universal" as the name implies

just be wary, this is a USB-C 5V port, so it will not work with USB PD adapters, you need most likely a USB-A 5V adapter and A-to-C cable

i am totally capabale of locking of access by myself.

said every hacked user ever

P.S.: I will look into it, although usually downgrading security for sake of "less hassle" is not a good idea

Very strange complaints :D :D Sorry It is a command line tool, what usability did you expect? And it is running a whole other operating system, of course it is resource hungry. This is completely expected. It only uses as much resources as PiHole needs, not more. Mind you, this is not Docker. It is ...

cfikes, yes, it would be helpful.

Can you name exact things that did not work? yes, BFD is missing, but otherwise things are working fine.

above arguments about apps are completely unrelated. don't you all remember the famous case with Apple?
3rd party apps are completely different than core functionality. Rex is right

Most of the new products are ARM based. It makes sense to put all effort into one platform, this makes it all easier and makes development faster

If it helps, you can imagine this as a powerful Gigabit Ethernet router with optional wifi

You can even disable it. It has a nice CPU and Gigabit ports.

We have devices with 5GHz. Not everyone needs 5GHz. Sometimes price is more important

All devices have it, just the manual is sometimes too old

That is not true. You might be mistaking availability in your country with general availability. There are devices that are well stocked in one country, and out of stock in another. Distributors need to correctly guess the popularity of each model, sometimes they fail at that. Try to order from anot...

Nearly any MikroTik wifi router fits the bill. If you need 5GHz, the hAP ac2 or hAP ac Lite if you prefer price over Gigabit:
https://mikrotik.com/product/RB952Ui-5ac2nD-TC

Remove the stand and it's pocketable

I suggest to take one of them and give it to the seller for analysis

The unit could be having hardware issues, I suggest to send it for Warranty repair for inspection

there is no command "script". What are you trying to import there?

Ignore above, to avoid blackout, use 24:00 which will make the transition seemless: 4 name="System" sun=0s-1d mon=0s-1d tue=0s-1d wed=0s-1d thu=0s-1d fri=0s-1d sat=0s-1d rate-limit="" tur-sun="" tur-mon="" tur-tue="" tur-wed="" tur-thu=&quo...

use seconds as well

Why not use Kid-Control menu, which is optimised for this use and works very well?

I suggest reading what it is and what it does. It was trained on a large amount of text, including from the internet, up to 2021. It has no internet access and is not a search engine or encyclopedia. It is TEXT engine. It was taught to write convincingly, nothing else. A lot of the info it gives is ...

ChatGPT is a language processor, not a true AI. It’s more accurate to refer to it as ”narrow AI” or Google with a smarter search interface.

It has no access to internet, so you can't compare it to a search engine.

Bugs and things like BFD have no "enabled=yes" switch in RouterOS configuration files, sorry. It is easy to add some basic things, but there are complex things that need to be made from 0.

Fixed again, sorry

It could be that, but most likely there is a more easy solution. Check your walled garden and remove entries from there. Many people enter some apple servers in there and then are surprised that apple is bypassed

How about this one? https://youtu.be/taQ70m0DVYA

Does it work if you go to 172.17.0.2/admin ?
Did you follow our video? It has quite clear step by step guide: https://www.youtube.com/watch?v=UMcJs4oyHDk

Good example with google translate. Initially it was quite terrible, but sometime in the last 2 years they switched to a new AI/ML based translation engine and suddenly the accuracy is like 99%. Same with GPT, it continues to evolve, and in a few years, it will become even more amazing. Just have to...

Yes, it can imitate valid mikrotik scripts, but many times it will make mistakes or introduce features that are not actually supported. It was most likely trained only on a small library of real mikrotik scripts, so it often assumes things. Not today, but maybe in a few years there will be something...

Your NAT masquerade is configured to be going out from one of the WAN interfaces, but in the WAN interfaces you don't have PPPoE. Add it to the WAN interface list members.

Maybe one should ask instead, "how to provide stable and fast internet to my customers, without scam methods".

Duplicate of viewtopic.php?p=961243

I understand the practical requirement. WPS was first invented by Cisco in 2006, I believe ? Nowadays it's considered one of the FIRST things you need to disable to protect your network. There is a reason it has been left out of CAPSMAN. I highly doubt it will ever get in (or back in if it ever was...

If you don't have a signal in your phone (or it's bad), it means that with LHG it will be better, but VERY UNLIKELY 100Mbit or more.
The difference is not that crazy.

Sorry for bothering this nice discussion, but all the AX devices are also using much much more powerful CPUs and new wifi + new CPU also always means more heat. Big case is not for aesthetic reasons, but for cooling. I don't think it's possible to make AX devices in the size of cAP lite Please make...

Sorry for bothering this nice discussion, but all the AX devices are also using much much more powerful CPUs and new wifi + new CPU also always means more heat. Big case is not for aesthetic reasons, but for cooling. I don't think it's possible to make AX devices in the size of cAP lite

What is this telegram leak?

P.S: links and spam removed

I'm giving you hints how to get free unlimited router, and you are not seeing it

P.S: there is no situation where RouterOS removes a CHR license. So there can be no warning, because it should not happen

Free license is not the same as Trial license. You can get a L5 trial and run indefinitely with no speed limits. The only thing, it will stop allowing upgrades in 60 days.

But this would not cause packet loss. You can use CHR without a license, there are no limits. Trial mode (not licensed) has only one limit after trial - it doesn't allow upgrading. There is no magic packet loss feature.

We usually release such hotfixes if it is very urgent and affects a lot of people and can be easily released.
Have there been any such bugs lately?

Not sure, but usually 502 is a server error, not something blocked

Of course! This is a known fact. Do not use the device itself to generate test and also run the tunnel. The CPU must generate random data that it will send, this is an intensive task. You must use iperf3 on some powerful machine, so that the tunnel is only a tunnel and traffic goes "over" ...

That recipe is most definitely fake. In Latvia we have different gingerbread cookies

use eBay

That's just not possible. With zero config, you can use any interface Ether1-5 to connect, but you will have to use the MAC address to connect (neighbor discovery works). No WAN cable needed.

Can you share the solution? Maybe there were no answers, as nobody knew how to do it right, and this topic can help somebody else

Like I said, when RouterOS libraries get updated, this change will come.

Please repot this to the maintainer of tzdb.
If there will be official changes made, they will come to RouterOS automatically.
MikroTik does not invent timezones. They have official names and they come from IANA

https://www.mt.lv/News109

Read our latest newsletter and learn more about:

- Merch store holiday updates
- The Export Champion award
- CCR powered 800 people LAN party
- In-depth CRS518 review by STH
- MikroTik Staff Value Picks, and more!

109_soctikliem.png

hAP ac is actually 3 chain https://mikrotik.com/product/RB962UiGS-5HacT2HnT

I'm sorry to hear that you're experiencing issues with your Mikrotik RouterOS installation. There are a few steps you can try to troubleshoot and resolve the issue: - Check that your computer meets the minimum system requirements for running RouterOS. RouterOS is a resource-intensive operating syste...

I, for one, welcome our AI overlord

You should correct it and tell ChatGPT what is right. It is capable of some learning

Container on MIPS is not out of spite, it is useless too - not many container images exist for MIPS architecture. You may get the container package, but what to do with it, without images?

in routerOS you can't set two active DoH servers, for any more complex scenarios, set up PiHole in Docker and then let it handle DoH

Because you are "catching" regular old DNS requests (port 53) from your LAN users, and "forcing" them to use encrypted DNS (DoH port 443). This is what that rule does. Takes unencrypted DNS and sends it to encrypted DNS.

Normal location is in "System -> Packages". The QuickSet only has a shortcut to the upgrade menu

Actually best course of action is to do complete config reset and see what speed you get with default settings. Then you will be able to rule out hardware issues in both ends of link.

Command is correct, but your device is still only connecting to 1Mbit or 6Mbit rates. Is it a laptop? Does it support modern WiFi standards?

-47 signal is good, but the other device at -80 is a bad signal (too far away)

What kind of device is connecting to it? Looks like no data is transmitted at the moment. Can you check again, when you are doing some kind of speed test?

Post also output of registration table, when you are doing the test. To see what band is used, and the signal

I have rj45 cable with 1000mbps link on first floor.
I want to be cable less scenario.

if you really expect cable to remain only the first floor, and top floors to get wifi somehow through magic ... not possible

QuickSet is ONLY for applying default setting for devices out of the box. If you already configured the device yourself, you should leave this section alone. It can't display your custom settings, it can apply NEW settings.

I removed the rude post.
Anyway, even if a device is old, it should not randomly slow down your traffic. Either it works or not. I think it should be config related.
But everyone was asking for configuration, which the topic author refuses to provide, so I can't imagine how anyone can help.

Rextended, if you see what kind of server he uses, most likly 99% it is for home environment to stop children from getting viruses or seeing porn banners.
So hold your ideology speech

No you can't, this is where the NAT rule comes into play. /ip firewall nat add chain=dstnat action=redirect protocol=tcp dst-post=53 this one will catch any other DNS request and send it to your router. Also, to be extra safe, you can block UDP port 53 from leaving your router, so no regular DNS req...

Yes, like the above poster says, it is a switch and should be configured accordingly to provide wire speed. Post your config maybe?

Well if from the client device you are now able to use the internet, it should be working.
Now go visit pornhub and see if blocking is also working

This config is also wrong. Did you watch the video? If you are using the router as the DoH client, you should not send the clients to the unencrypted DNS server, it makes no sense. Remove the DNS servers entries from the DHCP Network settings, replace it with the router IP 192.168.0.1 (probably). Th...

rc2 is literally "release candidate 2"

But the error is clearly that the DNS name can't be resolved. it means you added DNS static entries for the wrong DNS address

your static entry is for adult-filter-dns.cleanbrowsing.org
but your DoH config is for doh.cleanbrowsing.org

Your config hasn't changed "as far as you know". We really can't help if there is nothing to go on from

Your router doesn't know the IP address of this server, you must add a IP -> DNS -> Static entry for it. it looks like it could be these two IP adderesses: doh.cleanbrowsing.org. 3600 IN A 185.228.168.168 doh.cleanbrowsing.org. 3600 IN A 185.228.168.10 Then it should work. P.S: this step is also men...

To avoid sending DNS requests back and forth, it would be more logical to have your RouterOS device hand our PiHole IP address as the DNS address via DHCP and then let PiHole do everything, filtering and DoH.

double tap the TAB key on keyboard, or hit F1 on keyboard

I think the router has more spare resources than a Pi Zero, MikroTik ARM routers are very powerful, you will not be "bogging it down"

If that PiHole is running on a sufficiently fast machine, sure, it will use it's local DNS cache to give answers to DNS queries, this could be faster, if your internet connection is not that good. But if your internet connection is good and stable, most of these public DNS servers are very fast. Clo...

If the service you are "exposing" is meant to be public, like a webserver with port 80,443, then the port must be open. There is nothing for the firewall to protect. You are giving access to a port that should be open. The firewall allows connection only to that service on that specific se...

Which ports are you using? Only the first five ports are gigabit

You guys who have the popup opening, even if all your users have passwords, please email support@mikrotik.com with your RIF file, so we can see what triggers it.

What are you trying to do there? Try print before using set. And don't use set numbers, that is used after print, and should be used with number, not name

You can, but it will not handle a lot of users, since the device is made to be a switch and for hotspot it could be slow.
In Winbox go to IP -> Hotspot and click Setup.

Please do not use configuration found on the internet. Nearly all config needs to be adjusted anyway.

You have probably deleted the hotspot.npk package from the device.
Upload this file and reboot:
https://download.mikrotik.com/routeros/ ... 6.48.6.npk

CHR keys are different and unrelated to x86/hardware device licenses. This menu is not for CHR.

To convert a CHR trial license to a fully licensed one, go into the menu "All CHR keys" and click "Upgrade". There you will be able to use the Prepaid key

MikroTik support will provide a free license key for CCR devices if you contact them before repairs and provide proof of ownership. Be sure to explain your situation to receive this service.

This refers to constant position and this text applies to all WIFI as well. It is a generic warning not to mount the antenna near your head, if you are working in that position for a long time (days, months).
There are no known health effects when installing or performing maintenance.

We have several videos about using the TG-BT tags, maybe it helps: https://youtube.com/playlist?list=PLXr- ... D2Cgi5pOez

You will use Mantbox both as AP and also Mantbox as CPE?
Why not use CPE like SXTsq ?

1. They must both see each other (line of sight)
2. Elevation must be high enough (rooftop etc)

use calculator https://mikrotik.com/calculator

Do I understand it correctly ... with an authenticated RouterOS user who has WRITE access, you can do things to the router? Where is the bug? The same router can do full reset if he wants.

No line of sight? Moving trees, something else? This basically answers your problem, since 5GHz definitely needs line of sight. If there is no line of sight, 2GHz or 900MHz could be better

Please don't post the same thing in different sections, you already have a topic about this

There is a button for this. Next to the post, see Checkmark icon

Is there any issue? You are not even using your existing CPU properly. 20% is low usage. When you get closer to 100%, only then consider an upgrade.

Please everyone be civil.

Topic author should email official MikroTik support, but I can already say that unauthorised self repairs often lead to denied warranty and other issues. Always ask before disassemble.

Released means available for anyone to install.
If you want latest and greatest features first, you must be willing to install beta.

Old version. Install 7.7

You can also consider one of the 60GHz devices we have. No interference, more stable connection, ideal for shorter distances. https://mikrotik.com/product/cube_lite60

You should have contacted the seller about this. Unscanctioned repairs such as this will destroy the license and void warranty. There is no way to transfer licenses.

Log has no Debug entries, do you have that option also enabled like in my picture?

In this case, in your mikrotik router, add Logging rule like this. Then see in Log section, what is written, when you try to make the connection

Screenshot 2022-12-06 at 15.31.55.png

Capsman is already released for the AX products. You are replying in an old thread.

sid123 can you make a separate topic for your issue? this topic is about a specific issue.

everyone else - we are seeing something like this too. we are working on a fix in the internal betas right now, so next major v7 release should hopefully resolve the problem.

App is not abandoned, the subj. version was released a few weeks ago. Since a while I get the request to set a password for the user every time I login on my router via the iOS app, although i enter with user+password. Is this a bug or can I disable it ? Maybe you have an "admin" user with...

Don't connect, meaning there is a connection attempt that fails? In that case, what does the wireless debug log say in the router? Or they don't even see the SSID?

why doesn't it remove 60GHz devices from the list when you select frequency 5GHz?

because this model includes a small 5GHz module, for backup link purposes. Calculator uses that one for the estimate, not the main 60GHz interface.

The calculator is for 5GHz only (it actually says that in your images). Don't use it for estimating 60GHz links.

Netinstall to RouterOS v7.6 would be a good start:
https://youtu.be/gzlLbIf3Dbk

yes, I recommend reseting to defaults, they usually are optimised for best speed. you possibly have disabled fasttrack, that enables less CPU processing of the traffic, making downloads faster

you have somehow downgraded your wifi settings to use only 1 chain and only a 20MHz channel. Did you change the wireless settings yourself? Try to use QuickSet and change it to HomeAP-Dual, then default settings should get applied

First question, are you sure you actually connected to the 5GHz interface? When device has just started up, it can take up to 5-10 minutes for the devices to verify there are no weather radars in the 5GHz range. You can see the progress when you click on the 5GHz interface in Winbox. 70Mbit sounds l...

Well, looks like the MikroTik routers don't die so easily. Try to kill some other appliances instead

Why

? Can you clarify your goal?

Don't be so negative, we do have WiFi 6 devices. MikroTk previously did not make plug-n-play home devices for average Joes. Our drivers were custom made for professional use, they had tons of features no chinese manufacturer has. This is why WiFi 5-wave2 drivers are so different, they are the chip m...

We do have a plan to make a Thread border router, but no more information can be released yet.

To answer this and all related questions in other topics - well, most likely you have heard about global chip shortages. In one way or another, this affects all industries. Sometimes existing plans need to be changed to other chips, sometimes orders are delayed, etc. It is harder than ever to predic...

Search found 26128 matches