MikroTik

ErfanDL

The wds mesh roaming is very good. But network performance comes down It's a common misperception that using WDS mesh makes WiFi roaming any better. And I even clearly remember myself explaining this to you already here . I mean roaming without wiring AP's. in some places we can not wiring AP's for...

ErfanDL

That does not really work... or: it does not work very well. That totally depends on the client. Some clients roam nicely, other clients do not roam at all. Yes, laptops have no problem - drivers in Windows allow to set roaming aggressiveness (I use high) and roaming preference of bandwidth or dist...

ErfanDL

Something went wrong during a firmware upgrade, and now my hAP lite is totally unresponsive. When I apply power the #2 port LED flashes, then all the port LEDs flash, and then nothing. The pwr LED and usr LED are both dark, and my attempts at netinstall have been unsuccessful. My computer is an iMa...

ErfanDL

ErfanDL - available on "station" mode if "Advanced mode" in wireless settings is enabled and "Wireless" tab " is selected Thanks. find it. is it possible to enable this feature in AP mode ? example for smartphone wifi roaming The station roaming setting controls h...

ErfanDL

is it possible to enable this feature in AP mode ? example for smartphone wifi roaming
What do you expect a station-only feature doing in AP mode?

I want to roaming my wifi clients. such as smartphones, laptop, etc...

ErfanDL

ErfanDL - available on "station" mode if "Advanced mode" in wireless settings is enabled and "Wireless" tab " is selected

Thanks. find it. is it possible to enable this feature in AP mode ? example for smartphone wifi roaming

ErfanDL

where is wireless - added "station-roaming" setting; ? I cant find this option

ErfanDL

Capsman

Sent from my C6833 using Tapatalk

ErfanDL

Hi, We want bo buy miktorik router, but we don't know which model we need?! In our case, router is uses for routing SIP traffic. We have from 50 to 200 calls at same time in our office. Each sip call is 64 kbit for upload and download. Count of devices in the office is 60, but we plan to increase i...

ErfanDL

The pins inside the buzzer tx rx gnd vcc.
Connect routerboard tx to rx of ttl module and connect routerboard rx to tx of ttl module. The vcc must be connected to 3.3 volt of the ttl module and gnd to gnd module

Sent from my C6833 using Tapatalk

ErfanDL

Check bad blocks from system > resources

Sent from my C6833 using Tapatalk
The board doesn't even boot ... how to check for bad blocks.

Again repair router with netinstall and check bad blocks. If you can access routerboot from serial console try formating nand

ErfanDL

Check bad blocks from system > resources

Sent from my C6833 using Tapatalk

ErfanDL

Format nand from routerboot. Before formating try backup your license Sent from my C6833 using Tapatalk khodam midonam azizam :) netinstall o format fayde nadare Netinstall ke na. Ba console boro too routerboot hamoon bios mikrotik az oonja gozine nand format bezan. Age ham dorost nashod ke bayad n...

ErfanDL

Using wds dynamic mesh

Sent from my C6833 using Tapatalk

ErfanDL

Format nand from routerboot. Before formating try backup your license

Sent from my C6833 using Tapatalk

ErfanDL

Did you see the linked PDF? https://mum.mikrotik.com//presentations ... 849522.pdf

Which step is not working for you ?

How roaming works with hotspot 2.0 protocol?
I successfully running passpoint network but I cant understand how roaming works with hotspot 2.0

ErfanDL

+1

Sent from my C6833 using Tapatalk

ErfanDL

How can I format the NAND without serial port?

Regards.

You must open basebox2 case and using serial uart converter ( usb to ttl module or usb to uart module) connect to routerboard tx and rx pin then connect to routerboot bios with putty software.

ErfanDL

Format nand from routerboot. before formating, export your license

ErfanDL

Good afternoon Mikrotik I made the hotspot confirmations in mikrotik and when I test in my notebook or computer the redirect works perfectly. The page that I set opens, but when I log in and connect through the mobile menu the page I defined as redirect does not open. How can I solve this problem? ...

ErfanDL

Good afternoon Mikrotik I made the hotspot confirmations in mikrotik and when I test in my notebook or computer the redirect works perfectly. The page that I set opens, but when I log in and connect through the mobile menu the page I defined as redirect does not open. How can I solve this problem? ...

ErfanDL

Good afternoon Mikrotik I made the hotspot confirmations in mikrotik and when I test in my notebook or computer the redirect works perfectly. The page that I set opens, but when I log in and connect through the mobile menu the page I defined as redirect does not open. How can I solve this problem? ...

ErfanDL

Need a home AP LTE device

Sent from my C6833 using Tapatalk
We will have a WAP LTE Kit this year.

It's nice

ErfanDL

Hi
Sim for data connection? If yes, you can using usb hub and plugging your 3G usb modem to hub

Sent from my C6833 using Tapatalk

ErfanDL

Config for what? Hotspot? P2P?.......

Sent from my C6833 using Tapatalk

ErfanDL

Need a home AP LTE device

Sent from my C6833 using Tapatalk

ErfanDL

Hi
if your huawei supporting serial interface yes you can.

Sent from my C6833 using Tapatalk
What is the best and "STABLE" solution for sending or receiving SMS with mikrotik?

Its better using mini pcie gsm module. Some usb dongle can't work properly for sms solution.

ErfanDL

Hi
if your huawei supporting serial interface yes you can.

Sent from my C6833 using Tapatalk

ErfanDL

The CAPsMAN is considered to be in Manager Forwarding Mode when Local Forwarding Mode is disabled. You can control forwarding mode by either local-forwarding option in the /caps-man datapath configuration or datapath.local-forwarding option in the master configuration profile (with the latter takin...

ErfanDL

The (positive) impact of wds mesh on the wireless roaming is greatly exaggerated. In short: there is not any positive impact. Those are two completely independent technologies. Roaming is always a function of client. Protocols exists that allow APs assist clients in roaming, but those are not suppo...

ErfanDL

Help!!!

Sent from my C6833 using Tapatalk

ErfanDL

Any idea?

Sent from my C6833 using Tapatalk

ErfanDL

Hi All
Is there anyway to use wireless wds mesh roaming with wired backbone on routerboard?

ErfanDL

thanks, but routerboard wesite mentioned that basebox2 needs 8-30 volts to function. so it means if i turn on the device with 12 volts i am not able to utilize the maximum antenna (1 wattage)? Sent from my SM-N910C using Tapatalk If you need more wifi power, you must use 24 volt 3 ampere. for 1000m...

ErfanDL

Am i able to turn on the basebox2 through hex poe lite(RB750UPr2)?

i counld not find this model based on given discription on Mikrotik Wiki.

Thanks

Sent from my SM-N910C using Tapatalk

Yeah sure. But remember you need 3 ampere and 24 volt DC adapter

ErfanDL

Disable and Enable not worked in winbox
Please fix this issue

Sent from my C6833 using Tapatalk

ErfanDL

Can not disable and enable hotspot servers

ErfanDL

hAP Lite some times crashing when login to router

ErfanDL

Please help

ErfanDL

Hi friends

I have a problem in hotspot. when I set data traffic limit in hotspot user, the hotspot compute local network traffic and users traffic limits end. I want only limit internet data traffic not local network

please help

ErfanDL

Please help.
@jarda

ErfanDL

Google first.

Hi jarda
Can you help me in this topic?
http://forum.mikrotik.com/viewtopic.php?t=116595

Sent from my C6833 using Tapatalk

ErfanDL

Use device like OmniTik for AP; because when approach the AP and when getting away AP, don't lose connection to AP Sent from my SM-G928C using Tapatalk can omnitik roaming fast wireless network from ap to ap (dynamic WDS )? for example I installing OMNITIK on train and many OMNITIK on the tunnel, i...

ErfanDL

Use device like OmniTik for AP; because when approach the AP and when getting away AP, don't lose connection to AP Sent from my SM-G928C using Tapatalk can omnitik roaming fast wireless network from ap to ap (dynamic WDS )? for example I installing OMNITIK on train and many OMNITIK on the tunnel, i...

ErfanDL

nobody any idea ?

ErfanDL

Scan-list in stations, limit to APs frequency.
And use mode=station-roaming for zero handoff

Sent from my SM-G928C using Tapatalk

thanks MR.shahbazian for reply
what about microwave radios ? for example dragonwave devices

ErfanDL

I'd say this won't work, because of roaming issues (ie. handover issues) and interference issues You might be better using Ubiquity's Zero-Handoff APs or Meru's (now Fortinet) Seamless Roaming approach. With Microcell architecure and without extended Roaming support you're lost here. thanks for ans...

ErfanDL

That will not work
Tunnel is how long?
No los there

Sent from my iPhone using Tapatalk Pro

I can installing multiple SXT on the tunnel for each 200 meter. the tunnel length is 20 KM
and for this project OMNI antenna is better or sector SXT ?

ErfanDL

And the other side is what?
Fix antenna?
Who will rotate sxt on train?
Speed is not problem

Sent from my iPhone using Tapatalk Pro

the paint
( sorry my paint is not good

)

Untitled.jpg

ErfanDL

https://en.m.wikipedia.org/wiki/Line-of ... ropagation

Sent from my iPhone using Tapatalk Pro

thanks for answer. if I have LOS what about speed ? the vehicle is metro train with 80 Km/h speed

ErfanDL

If you have LOS.. yes
Why not

Sent from my iPhone using Tapatalk Pro

what the mean about LOS ?

ErfanDL

Hi friends.
can SXT5HpND communicate with another SXT5HpND on the vehicle with 80 Km/h speed ?
the SXT's Is installed at the same height and same way.

ErfanDL

RouterOS works only on two type of devices:

1. x86 PC box (real or virtual)
2. RouterBOARD (TM) hardware, made by MikroTik

Please build an image for raspberrypi 3

ErfanDL

I dont believe it would be portable from 3011 arch to RPi3 Arch, but in any case the main problem is that the ARM build only provides .npk files, meaning you need a pre-existing routeros installed to upgrade. Only x86 provides a CD ISO - and it does so because x86 is much larger to support a range ...

ErfanDL

That was the first thing I did.

cheers

Can you see your router in neighbors?

ErfanDL

Hi all.
Is it possible to install ARM version of ROS on raspberry pi 3 ?

Thanks

ErfanDL

Upgrade winbox to 3.7

Sent from my C6833 using Tapatalk

ErfanDL

I upgrade my hap lite to 6.38 and upgrade firmware to 3.36 whats chanelog in new firmware version 3.36 for hap lite?

Sent from my C6833 using Tapatalk

ErfanDL

with wine takes forever to open winbox.
I can not drag the packages to update.
I have to open by web to upload packages.
Could be a problem in your linux.

Wine works actually faster than on Windows, at least here in our office.
Drag and drop also works fine.

I need winbox on raspberrypi

ErfanDL

so with this 6dB omni antenna ishould use many of them. how about using 15db antenna instead if it? 15 dBi antennas need more power and you must replace original power adapters with 24 volt 3 amp adapter and if your want use your wifi network for servicing smartphones there is no different between ...

ErfanDL

the location is not important, the choice of the radio to cover the whole area is important. i get confused with so many radios. what is the best choice?

I recommend you, using basebox2 with 6dBi omni antennas.

ErfanDL

Can you send me google maps link of your location?

ErfanDL

Hi
see this topic
http://forum.mikrotik.com/viewtopic.php?t=113084

Sent from my C6833 using Tapatalk

ErfanDL

Maybe two DynaDishes if the line of sight is clear:
http://i.mt.lv/routerboard/files/antena ... 123306.pdf

I have a 50 km link with dynadish in clear area ( desert ) link speed is under 20 or 15 Mb/s
and another link 82 km with netmetal5 and mant30 the link speed is 35Mb/s

ErfanDL

Netmetal5 + mant30 antenna dish

Sent from my C6833 using Tapatalk

Can i go with Netbox5

Yes you can.
use 24 volt and 3 amp power adapter

ErfanDL

Netmetal5 + mant30 antenna dish

Sent from my C6833 using Tapatalk

ErfanDL

I think it will be a Christmas gift
But what year?

Century 22

ErfanDL

Please helppp

ErfanDL

Hi. is any way to block upload file by extension type example block uploading ,jpg or .mp4 ?

thanks

ErfanDL

Hi all.
I need an script to log daily all hotspot trial user mac address to a text file. can any one help me ?

thanks

ErfanDL

Can't set wireless tx power

Sent from my C6833 using Tapatalk

ErfanDL

Yeah, but which year?

Maybe century 22

ErfanDL

17th

2117th...

ErfanDL

releasing V 7.0 stable for christmas

ErfanDL

Wine works fine with MAC (L2) connection and other features.

It's very hard to build linux version? Wine can't run on raspberrypi machines and we need winbox on linux.
Mikrotik kernel is linux but winbox linux version is not available

ErfanDL

Install latest ROS with netinstall

Sent from my C6833 using Tapatalk

ErfanDL

if you using dhcp client to get internet on mikrotik then you must set mikrotik dhcp client ip to your modem DMZ settings. for example mikrotik dhcp client ip from modem is 192.168.1.101 set this ip on your DMZ modem

Sent from my C6833 using Tapatalk

ErfanDL

Install new ROS with netinstall. Beforce upgrade backup your config

Sent from my C6833 using Tapatalk

ErfanDL

Check the ether1 pins cant conflict with other pins. Try hard reset hap lite using reset button

ErfanDL

Working without any issue in CRS125 , Netmetal 5 , Dynadish , SXT 5hPND , RB951Ui , hAP Lite

thanks for update

ErfanDL

You can't do it. The distance is to long
Laptop and mobile only can communicating with access point in 100 meters

Sent from my C6833 using Tapatalk

ErfanDL

Hi Engineers ! I have many wireless network in different city in my country ... and i want to connect each hotspot network in one central radius server ? and user can use my cards in any city .. what should i do to make all networks one hotspot network ? what are the requirements ? please help me w...

ErfanDL

Hi, I have one rb3011 with hotspot running, with 8 Antennas Unifi AP. It is working fine within a single antena, but when the user move to a second point, hotspot ask for credentials again. I'm using HTTP CHAP + Cookie, and Iphone. Any know problem in this scenario ? What would be the best way (and...

ErfanDL

I have already set the dns to .com (hotsopt.com) why changing to .pt would make any better??

The .pt sloved my problem with ios and hotspot

ErfanDL

Hi, We are facing issues with IPhones IOS10 with our hotspot as the login page is not opening at all. It is working OK for older ios versions. Does anyone have any solution for this issue? Also we have dns set to .com (e.g. hs.123.com) thanks. Regards, B Change DNS name to .pt example: hotspot.pt

ErfanDL

It's problem with 6.38 rc and netinstall. I broked my crs 125 and only recovers from console serial

ErfanDL

6.37.2 just releasing for make dude bugy?
Please post 6.37.2 changelogs

Changes since 6.37.1:
this means, 'Changes in 6.37.2 compared to 6.37.1'

So 6.37.2 is real version of 6.37.1

ErfanDL

Its normal with metal. Use basebox 2

Sent from my C6833 using Tapatalk

ErfanDL

6.37.2 just releasing for make dude bugy?

Please post 6.37.2 changelogs

Sent from my C6833 using Tapatalk

ErfanDL

RouterBOARD RB 3011 UiAS-RM Firmware: 3.27 RouterOS: 6.36.3 Hi. My 3011 can't establish 1000mbit connection through it's gigabit ports with dlink dgs-1210 or with my dl380 g7 server. By the way if i connect them directly (dlink --- dl380), gigabit link works. So i'm sure that i use true gigabit por...

ErfanDL

RouterBOARD RB 3011 UiAS-RM Firmware: 3.27 RouterOS: 6.36.3 Hi. My 3011 can't establish 1000mbit connection through it's gigabit ports with dlink dgs-1210 or with my dl380 g7 server. By the way if i connect them directly (dlink --- dl380), gigabit link works. So i'm sure that i use true gigabit por...

ErfanDL

RouterBOARD RB 3011 UiAS-RM Firmware: 3.27 RouterOS: 6.36.3 Hi. My 3011 can't establish 1000mbit connection through it's gigabit ports with dlink dgs-1210 or with my dl380 g7 server. By the way if i connect them directly (dlink --- dl380), gigabit link works. So i'm sure that i use true gigabit por...

ErfanDL

Hi Guys,

I have two mikrotik routerboard with two different network but network and file sharing is not establishing, even i can't ping between these networks.

Is there any additional configure i have to do?

Thanks in advance.

Check your windows firewall settings.

ErfanDL

Ok, so the problen in this case was the missing static route in the default gateway of the wan network.

Now i have nat disabled and can acces the internet and the wan network from the lan network.

But i still can't acces the lan network from the wan network.

Withou vpn you can't do it

ErfanDL

Using vpn server

Sent from my C6833 using Tapatalk

ErfanDL

ErfanDL - We usually reply within 3 working days. Did it work in 6.37 version? If it did not, then please do not write such posts in rc related topics. Write to support - that is the correct and fastest way. thanks for reply. yes I test it in 6.37 - 6.37.1 and latest RC 6.38 but did not worked. tha...

ErfanDL

Version 6.38rc30 has been released. Changes since previous version: *) dns - do not resolve incorrect addresses after changes made in static dns entries; *) dude - (changes discussed here: http://forum.mikrotik.com/viewtopic.php?f=8&t=112599); *) firewall - fixed timeout option on address lists...

ErfanDL

Hi all

please add this hardware version in new RouterOS: D-Link DWM 157 H/W Ver D1

thanks

ErfanDL

Hi friends,
Can I use 3G internet with Bsebox 2 sim slot ?

ErfanDL

I have a USB modem Huawei 3372 (device = "1: 3" vendor = "HUAWEI_MOBILE" name = "HUAWEI_MOBILE" vendor-id = "0x12d1" device-id = "0x1506" speed = "480 Mbps" ports = 0 usb -version = "2.10") and plug it RB951Ui. Internet connectio...

ErfanDL

i dont like installations with repeater mode. i prefer cable method so if there is a problem i know exactly which ap is off. (neighbour list)
where exactly to place the two 951ui ?

Place in room5 and room9

ErfanDL

Setting up a new Routerboard SXT LTE. lte1 interface 'is' listed within interfaces, it is 'not' listed in the interfaces in the add DHCP Client. Have completed a factory reset, upgraded routerboard and tried to create DHCP Client with Web interface and with Winbox. The lte1 is still 'not' listed. R...

ErfanDL

so you say is better to use rb951ui inside the room and not in the corridor. is just one wall only. imagine you are inside a hotel room and you have one ap. next room should get the signal also. i think i have to make a survey in my house or at the hotel just to check signal strength difference wit...

ErfanDL

No hap lite wifi power cant through multiple wall. Use RB951Ui

Sent from my C6833 using Tapatalk

ErfanDL

Hi friends. My ADSL isp has unlimited download service from special sites. for access this service I must add static route to modem but my modem does't have this feature. Now I want do this on hap lite router can any one help me how to set static route in pppoe client? the static route IP address is...

ErfanDL

Ok I understand, suppose I plan for point to multipoint then what device use on multiple point? Should I install multiple base tower? and what kind of device using for Client CPE? http://uploads.tapatalk-cdn.com/20161101/1ec34d4f8bd65c627c39b5762ea99730.png Sent from my iPhone using Tapatalk yes yo...

ErfanDL

Starting 70-100 clients but in future may be more

Sent from my iPhone using Tapatalk

for 30km you can use Netmetal5 and mant30 antenna dish but remember its good for point to piont links. for point to multipoint use netmetal5 and mant30 as your backbone

ErfanDL

Hi
How many clients you need?

Sent from my C6833 using Tapatalk

ErfanDL

Hi everibody. when I connect to my WIFI hotspot it doesnt show the capacitive popup. the last week it run very good, but I think some configuration I've change broke this. I share my hotspot configuration: dns name: nexionfi.digitalvision.com walled garden: :^captive.apple.com *.apple.com. Thanks f...

ErfanDL

Yes
https://routerboard.com/RB3011UIAS-RM

Sent from my C6833 using Tapatalk

ErfanDL

RB951Ui after some minutes Bandwidth test crashing and reboot

ErfanDL

I recommend you, using Wireless WDS Dynamic mesh to forcing clients connecting to among of the nearest AP using this command /interface wireless access-list add authentication=no forwarding=no signal-range=-120..-73 add signal-range=-85..120 this command, allow only 73dbm or better signal to connect...

ErfanDL

Wifi influences birds the same like all other living creatures.

thanks for replay

what about lowering the tx power and antenna gain for protection of birds? or use wAP routerboard ?

ErfanDL

Hi friends. I want to full covering Wi-Fi in Birds Garden area. I have a question: Is Wi-Fi network is causing harm to birds? Like before project ( http://forum.mikrotik.com/viewtopic.php?f=7&t=113084&p=561678#p561678 ) I want to use Basebox2 for covering Wi-Fi in area Snap62.jpg thanks

ErfanDL

There isn't much you can do about this since he could spoof a MAC address to gain access to your network again. Unfortunately you are going to spend an infinite amount of time trying to update rules each time he changes his MAC. One option is option is to find him and set the dogs on him. If you ha...

ErfanDL

I am setting up a 951G and after getting the basics set up correctly, I need to designate several computers on the network with static IPs, leaving everything else to have dynamic IPs. I need the computers with static IPs to have the highest priority on the network and Internet access. Please give ...

ErfanDL

ROS is already have this feature

Sent from my C6833 using Tapatalk

ErfanDL

Very nice achievement. What number of concurrent users with total traffic do you see? first, Thank you very much for helping me in this project about 48 smartphones for internet hotspot and 10 smartphones for VOIP Asterisk ( installed in one of Basebox2 with OpenWRT METAROUTER ) the total bandwidth...

ErfanDL

Finally I build my networks with five BASEBOX2 and 2 RB951Ui in WDS Dynamic MESH and worked like a charm

Screenshot (32).jpg

ErfanDL

Trying to install an RB915. Right now, I have it connected to the existing Linksys900 that the RB will replace. The address for the 900 is 192.168.6.1, and I left the default address for the RB as 192.168.88.1 and set up DHCP. I set the DNS server to 6.1 (8.8.4.4, also), as well as the gateway. I'm...

ErfanDL

Hello, please help me to share the loo how to access mikrotik server, my engineer just share me this link Access to Mikrotik: -Use Winbox Application: http://download 2.mikrotik.com/routeros/win box/3.4/winbox.exe but this link not working, can you please help to correct the link ? thank you Hi get...

ErfanDL

I have same problem in CRS 125, I solved this problem by enabling master port

ErfanDL

Spectral Scan in hAP Lite make crashing router and hanging please fix

ErfanDL

I have AP (groove, L4) with home LAN & internet access. Now I would like to add another AP which can bridge LAN to this WiFi and work as AP + isolated AP (for guests) at the same time. Is hAP lite OK for such task?

Yeah hAP Lite can do it

ErfanDL

ErfanDL, Thanks for your response. I took a look at repeater mode, but it seems like this is really designed for an environment where linking via copper/optical isn't practical. I can readily run wires to each of the locations where I think I should have an AP. In that scenario, do you think that I...

ErfanDL

Hi, I have a split-level house that I'm trying to provide WiFi coverage for. In the past, I've tried configuring multiple APs with the same SSID, channel, etc, but I have found that my wireless clients simply will not roam properly or quickly. Instead, I've installed low-loss coax and have connecte...

ErfanDL

Hi Guys,

Please help with VoIP on Mikrotik,

I have a Grandstream PBX behind Mikrotik, the PBX shows that it is registered to the SIP server but I can not make or receive calls,

please help setup on Mikrotik.

Hi
Enable default forwarding in wireless settings

ErfanDL

Hello all I use Microtik Hotspot and use the open wirless AP ( nanostation m2 ) To deliver the Internet to customers.> There are those who penetrate the network through the programs Like (netcut & fing & another spoofing program ) The Penetrator Change his MAC number to customer Mac number....

ErfanDL

Hello all I use Microtik Hotspot and use the open wirless AP ( nanostation m2 ) To deliver the Internet to customers.> There are those who penetrate the network through the programs Like (netcut & fing & another spoofing program ) The Penetrator Change his MAC number to customer Mac number....

ErfanDL

Yes. Exactly like this. Put the omni antennas not higher than 2m.

sorry for replying

Can I use WDS Static Mesh in this project ?

ErfanDL

Yes. Exactly like this. Put the omni antennas not higher than 2m.

thank you very much for helping me.

ErfanDL

It can work if the clients will be able to deliver their signal to the APs. Omnidirectional antennas need to be put closer to the center while panel antennas could be more on the edge. I am really confused for this project :( what can I do now ? moving omni antennas to the center of the park ? like...

ErfanDL

You need to change your thinking, you need to start from weakest point in this setup - as it is park, it is client devices - mobile phones and tablets. You need to find out what is average distance they can transmit data back to AP. remember that Wi-Fi communication is bidirectional, not only phone...

ErfanDL

The relevance of a sector antenna is not that it would cover more distance, but that you have all the access points at the same place so you can wire them all at once and are not tempted to use inferior concepts like mesh networking. about mesh network: I mean Roaming all AP's together for example ...

ErfanDL

It will always require experimentation. But note that mesh networking is going to cut into your performance because you use the same radio bandwidth both for user access and interlinking. Cabling to each unit (to a central router/switch where your internet connection is) is always going to work bet...

ErfanDL

It will also depend on how you can mount them. E.g. in the center of the park you could mount 4 units with 90deg sector antenna each covering 1/4 of the park and you would not need mesh network (this would be an advantage). thank you for reply I think all mikrotik sector antenna is 5GHz but some of...

ErfanDL

Hello, from my experience and point of view: Your request cannot be answered based on this little information available. Planning on a map may be a first approach but NEVER covers natural obstacles (buildings, trees) and also no influences by other wireless systems nearby. The most appropriate way ...

ErfanDL

Hi friends.

I want to full covering wifi signal in 4500 Square meters for smartphones hotspot. my question is how many device need for mesh networking and which routerboard model is recommend ?

Snap1.jpg

thanks

ErfanDL

Tested on hAP Lite and CRS125-1S and RB951Ui No issues.

Sent from my C6833 using Tapatalk

ErfanDL

Please add GPS webui (remotlly find router location in webfig)

Sent from my C6833 using Tapatalk

ErfanDL

Good day any one can solve my problem base on my diagram from my loptop connect VPN to router why i can't ping the router A when i connect to router B and same also when i connect to router A i can'T ping router B but my router B and route A can ping each other and woking fine Hi in router A add ro...

ErfanDL

Good day any one can solve my problem base on my diagram from my loptop connect VPN to router why i can't ping the router A when i connect to router B and same also when i connect to router A i can'T ping router B but my router B and route A can ping each other and woking fine Hi in router A add ro...

ErfanDL

Good day all
I'm currently using the mikrotik x86 router OS

Want to know are those adapters supported in the version 6.36 ?
Dlink DWA-582 and ASUS PCE-AC56 and ASUS PCE-AC68

http://wiki.mikrotik.com/wiki/Supported_Hardware

ErfanDL

Hello Mikrotik users, I have set a Wireless WDS Mesh with 03 Access Points (AP1, AP2 and AP3). And now I need to give internet access to AP2 and AP3 without to disable the hotspot feature for wireless clients. I have always add routers IP and MAC address in Hotspot IP binding of AP1 router. But I c...

ErfanDL

we are WISP setup. we have given 2 Mbps lease line to customer. tested 2mbps at base station working ok. we installed PTP link of sxt lite5 bridge mode. bandwidth TCP bandwidth is 70 mbps. but at customer end we get 2 mbps download but 1.2 mbps upload. any setting missing or any additional config n...

ErfanDL

nice theme thanks

ErfanDL

@boen_robot Hi all can anyone help how gps-to-url script worked ? I installed phpmyadmin and sql server on my host and copy ( phpsqlajax_dbinfo.php , mikrotiklocation.html , mikrotikgps.php , mikrotik_genxml.php ) to root of my host and run script from routeros but nothing happen. the gps-to-email ...

ErfanDL

@boen_robot Hi all can anyone help how gps-to-url script worked ? I installed phpmyadmin and sql server on my host and copy ( phpsqlajax_dbinfo.php , mikrotiklocation.html , mikrotikgps.php , mikrotik_genxml.php ) to root of my host and run script from routeros but nothing happen. the gps-to-email s...

Search found 398 matches