MikroTik

It would be a nice feature to show a warning message about what happens when you generate another license-ID --- where a simple text message warns you what will happen to an existing license & how to move a license from one CHR to another CHR , then ask "do you really wish to continue ?&quo...

The IP address 92.43.155.117 was in btest jail and had a remaining waiting period of 6 days 12 hours 23 minutes.
I just now remove it from btest jail.

North Idaho Tom Jones

June 13'th 2022
I just now updated the ROS CHR btest server from 7.2.3 to 7.3.1

All btest jails and waiting periods have been reset ( cleared ). That means the waiting period is again reset/cleared.

North Idaho Tom Jones

Info June 13'th 2022
FYI - at this time ...
There are 213 unique btest(er) IPs in the 27-Hour waiting period.
There are 915 unique btest(er) IPs in btest jail.

North Idaho Tom Jones

Hi, Thank-you. I just tested our new fiber drop for ~30 seconds down then up...seems your setup worked perfectly. Quick question...does my testing for a total of under a minute then stopping the testing mean waiting 27 hours to the next ability to test? I don't want to be an abuser with your server...

Hi everyone, I in Houston and just activated my 40g symetrical internet. any suggestions on how to test it? I have a CCR2216-1G-12XS-2XQ You could try to locate multiple btest servers and try multiple btests at the same time. - that is if you can find enough btest servers to be able to add up to 40...

I would really like to see an optional SwOS package for ROS Or ... a virtual SwOS that runs under/inside a ROS MetaRouter environment ) ( this might be the easiest one to create ) ROS is is great , however it is really complicated when working with Vlans in a switch environment. SwOS is great when w...

Hi, please help configuring Mikrotik RB2011 to work with my ONT fiber from my ISP. The data suplied from my ISP is this: login: XXXXXX password: XXXXXXX VPI / VCI: 8 / 35 protocollo: PPPoE encapsulation: LLC ip statici: 11.12.13.22/32 DNS primario: 46.31.104.208 DNS secondario: 46.31.104.209 If you...

Is this still active?
All I get is can't connect on three different devices.
Thanks

try it now.
rebooted the btest server.

for the best wireless signal strength and wireless throughput, point both antennas in a point-to-point wireless system so that they are spot-on facing each other.
yes - it will work if they are not exactly pointing to each other but the link will not be optimum.

North Idaho Tom Jones

For maximum coverage - try these settings: Wireless 2.4 GHz Band: 2GHz-B/G/N Channel Width: 20/40MHz Ce Wireless 5 GHz Band: 5GHz-A/N/Ce Channel width Ceee ( Ceee is the fastest - and 20 Mhz is the most reliable & slower ) Wireless - Advanced Hw Retries: 15 Disconnect Timeout: 00:00:15 On Fail R...

Just performed a test using your server; I'm located just south of Seattle, WA, USA; Comcast/Xfinity is my ISP. I was getting about 280MBit/s down, and 11.9MBit/s Up to you. Which is in line with what my ISP should be providing me. Thank you for making a public server available for this. it's much ...

May 16'th 2022 - ICMP Ping has been disabled. to/from this btest server. This was done to prevent ping-speed tests against this btest server. I added an additional firewall rule to the btest server to now drop ICMP ping traffic. ICMP pings are now denied for two reasons: - #1-of-2 ; It appears ther...

Take a look at configuring NAT444 on a Mikrotik ( I am not referring to normal NAT44 ). Info: - Each live IP address has 65,536 ports. - If you configure NAT444 to use 250 ports per inside IP address, a single live IP address can NAT444 ( aka NAT ) an internal /24 ( aka 192.168.0.1/24 ) network. Exa...

Sensible move, both the blocking and opening the door for " sponsored" access. Someone needs to pay the bills and right now it's only you. Well , from the beginning when I started this btest server on Jan 27, 2016 , I have always stated no automatic scripted btests are to be performed to ...

Related and somewhat un-related to this btest forum topic: I assume that many ISPs and WISPs here in the United States have heard and read about the Biden administration plans to expand free high-speed Internet access to 40% of American families. This is known as the : federal Affordable Connectivit...

May 10'th 2022 : Hundreds of Mikrotik admins have configured automatic btest script schedules to automatically btest to the btest server I operate and manage. Automatic btests on a schedule are not acceped and are against my conditions to btest my btest server. My btest server is averaging 1 to 4 G...

BAM - 400 IP addresses out of 7-day btest jail. Quick notes - limit total testing time to less than 10 minutes. You must wait about 27 hours until you can btest again. If you attempt to btest more than 10 minutes , then you go to btest jail for 7+ days until you can btest again If you attempt to bte...

Quick fyi-update on the new configuration changes to help prevent cron / script / automatic / timed btest checks to my btest server: over 350 unique IP address are in btest-jail for 7+ days because each remote IP address was detected to be on an automatic timed btest schedule that was running withou...

... while I understand, I'm sometimes forgetful- and hope your ban period is an exponential-backoff kind of thing (i.e., if I slip up once or twice, I only lose a day!) Hell, you should take PayPal for temporary whitelisting (I'm serious!). Your tests have been very helpful to me recently (and Mikr...

Heads-Up notice I made some configuration firewall changed to the btest server I operate and manage. IPv4: 23.162.144.120 IPv6: 2605:6340:0:1b::4 btest username: btest btest password: btest The new configuration allows for a window of 10-minutes for remote admin btesting. The 10-minute timer starts ...

Dear All, I try my best to limit traffic (50MB) on Ethernet-2 (slave) under the bridge using simple queue but no success so i decided to take expert opinion. My IP POOL : 172.16.20.2-172.16.20.254 (5MB) 172.16.21.2-172.16.21.254 (8MB) 172.16.22.2-172.16.22.254 (10MB) 172.16.23.2-172.16.23.254 (15MB...

Well, that explains that :) I just wanted to know if Tom's blacklist was automatic, or does he manually ban IPs if the logs show someone overusing the server; I'd like to experiment with some settings on my end and wanted to run multiple tests. ... and "Bandwidth Test" REALLY needs a time...

To all of those who have posted a "Thank you" - You are welcome. +1 Thank You here! Unlike the public speedtest servers, I can trust your server isn't shaping traffic to get end-users off the ISP's backs. (PM me, please- it doesn't look like I can PM you directly and I have a question. Th...

May 3'rd 2022 -- the public access btest server has been updated from CHR ROS version 7.2.2 to version 7.2.3 IPv4: 23.162.144.120 IPv6: 2605:6340:0:1b::4 btest username: btest btest password: btest Note; To use this Mikrotik public access btest server , you agree to the following terms and condition...

May 2'nd 2022 -- the public access btest server has been updated from CHR ROS version 7.2.1 to version 7.2.2 IPv4: 23.162.144.120 IPv6: 2605:6340:0:1b::4 btest username: btest btest password: btest Note; To use this Mikrotik public access btest server , you agree to the following terms and condition...

I am not able to do the test. Is it down? I just now rebooted the btest server. I see there are some remote btest(s) running to/from other Mikrotik admins. Can you ping the btest server ? In the past , have you ever been able to btest to/from this server ? Try using tcp ( send then a receive ). Is ...

April 15'th 2022 -- the public access btest server has been updated from CHR ROS version 7.1.5 to version 7.2.1 IPv4: 23.162.144.120 IPv6: 2605:6340:0:1b::4 btest username: btest btest password: btest Note; To use this Mikrotik public access btest server , you agree to the following terms and condit...

Code: Select all
/sys rou settings set disable-pci=no
(is not a Joke...)

Good one
+1

Have you tried a Winbox - System - Reset Configuration with No Default Configuration ( no check on Keep User Configuration ) ? Also , in New-Terminal , do a /Interface ethernet print , Are the MAC addresses in sorted order with the interface names ? North Idaho Tom Jones Hi! yes, have done that. An...

Have you tried a Winbox - System - Reset Configuration with No Default Configuration ( no check on Keep User Configuration ) ?

Also , in New-Terminal , do a /Interface ethernet print , Are the MAC addresses in sorted order with the interface names ?

North Idaho Tom Jones

To all of those who have posted a "Thank you"

You are welcome.
It's rewarding to read feed-back from those using this btest server

North Idaho Tom Jones.

Great ty for the response i will change the settings back.....or atleast try a sector with nv2 and on client side any. And one sector on nv2 and client side any with rts cts last time i tested this had a bit more throughput. My MCS is set to 12 so wil look into that mybe its a bottlenek on the ap l...

Avoid using CTS on anything ( wireless and/or ethernet ). Using CTS on Ethernet can sometimes slow your network down to the speed of the slowest device. Using CTS on wireless creates a packet delay overhead that can also slow down your wireless network(s). I prefer wireless nv2 settings on all APs &...

March 22'nd 2022 -- the public access btest server has been updated from CHR ROS version 7.1.3 to version 7.1.5 IPv4: 23.162.144.120 IPv6: 2605:6340:0:1b::4 btest username: btest btest password: btest Note; To use this Mikrotik public access btest server , you agree to the following terms and condit...

Hi Tom, I've got an upgrade to 25Gbps from my provider and had following btest results: Location: Zürich, Switzerland Device: CCR2004 Average (udp): Tx: 3.1 Gbps Rx: 499.4 Mbps Average (tcp): Tx: 697.1 Mbps Rx: 226.1 Mbps (There have been more than 100k lost packets, so I guess, the path between us...

i think no tcp-udp rules can be sumarized in one rule at the end add action=src-nat chain=src-nat src-address=100.64.0.0/24 to-addresses=192.0.254.2 save 260 lines with that What I like about my lengthy NAT444 configuration is: If/when I receive a copyright notice stating somebody is downloading co...

** Would somebody else experienced with NAT444 please check my correctness in this post. Here is an example of a NAT444 configuration. Lets say you have a CGN block ip IP address to your customers which is 100.64.0.0/24 Lets also say you have a single Live IP address 192.0.254.0/30 Where your config...

memory or flash ?

If flash
- turn off graphing
- delete all of your backups ( then create a new backup )

If you are using fiber , check your optical receive signal strengths ( on both sides ) then verify the sfp modules are within spec of the received signal strength. Also check the distance your sfps are rated for.

You have good download speed - however your upload speed sucks. In my opinion , it looks like your ISP sets your upload speed at 3-percent of your download speed ( 30 / 1000 = .03 ) I often see that when an ISP configures upload speed at less than 5 percent of the download speed , that it creates p...

Complete. Download ~950Mb, upload ~30Mb. You have good download speed - however your upload speed sucks. In my opinion , it looks like your ISP sets your upload speed at 3-percent of your download speed ( 30 / 1000 = .03 ) I often see that when an ISP configures upload speed at less than 5 percent ...

try it now - i rebooted it again & this time I am watching it Online and flying. Getting 31Mb Upload, 953Mb down. Before in the brief time it was working it was around 180mb down. I killed the test after about 20 seconds, let me know if you'd like me to run again. Sure - do a 15 second udp down...

FYI - the btest server does have a time-out setting , where after about a minute it will no longer btest with your Ip address , then after a timeout period , it will again allow a btest from your IP.

I just now did see your connection.

Hmmm , for the heck of it , I rebooted my Mikrotik CHR btest server ... What are you getting for speed ? Be sure not to run to long of a btest server ( about 5 to 10 seconds - just enough time to see what it is peaking at ). Note : UDP is a pretty good indicator for what your Internet pipe size is....

My btest server should always answer a ping. I suspect there is a firewall somewhere near your side of the Internet. Based on your pings and traceroute , I may be able to figure out where the issue is. Did something change on your end? I can now ping and run the test. Hmmm , for the heck of it , I ...

- Can your Mikrotik ping 23.162.144.120 ? - Is your Mikrotik also a firewall ? - Is your Mikrotik behing a firewall ? - What are the first three numbers of the outside Internet facing IP address ? - What country are you in ? - Have you tested all four combinations of btest ( udp-send & udp-rece...

Good Day! I'm trying to connect to IPV4 23.162.144.120 using either tcp or udp and I keep getting a can't connect error. I just upgraded my ISP connection to 1Gb and am trying to see if I'm actually getting anywhere near that. Could it be something in my firewall rules? Thanks for providing this gr...

Question: I pretty much only use CHRs for my core routers and bandwidth shaper and BGP and NAT444 ( 60-thousand lines of NAT configuration for ports per live IP address for my CGN networks ). Is an x86 with X86_X64 enabled any faster or slower than a CHR doing the same thing ? your post caught my a...

Question:

I pretty much only use CHRs for my core routers and bandwidth shaper and BGP and NAT444 ( 60-thousand lines of NAT configuration for ports per live IP address for my CGN networks ).

Is an x86 with X86_X64 enabled any faster or slower than a CHR doing the same thing ?

re: ... how much lines of NAT configuration you end up with for each /21 CGN ? ... to NAT444 a /21 CGN block to 8 live IP address where each CGN IP address is assigned 250 ports from a live IP address I use 6,335 lines of code in my CHR NAT router per /21 CGN network block. In my network , I have t...

re: ... how much lines of NAT configuration you end up with for each /21 CGN ? ... to NAT444 a /21 CGN block to 8 live IP address where each CGN IP address is assigned 250 ports from a live IP address I use 6,335 lines of code in my CHR NAT router per /21 CGN network block. In my network , I have tw...

Re: ... logging ... For CGN NAT , use NAT444 ( not the simple standard NAT44 ). With 8 Live IPs , you can Nat an entire /21 CGN network and not need to log anything. In my CGN networks , I NAT each CGN IP to 250 ports on a Live IP address. There is no need to log your NAT translations. When I get on...

February 22'nd 2022 -- the public access btest server has been updated from CHR ROS version 7.1.2 to version 7.1.3 IPv4: 23.162.144.120 IPv6: 2605:6340:0:1b::4 btest username: btest btest password: btest Note; To use this Mikrotik public access btest server , you agree to the following terms and con...

Are you testing using UDP ?
What type Mikrotik are you using ?
If using a CHR , what is your Interface speed and license ?
Send was using UDP, Receive did not do a transfer on UDP, used TCP.
CCR2004

Sounds like a firewall somewhere

Was using your Btest server to troubleshoot 2.5Gb service only receiving 1.0Gb Download(supposed to be 2.5Gb both ways). Calgary, Alberta. Outgoing - 2.5Gb Incoming - 1.04Gb Thanks for hosting this wonderful tool.. I hope I didn't over use my access... Are you testing using UDP ? What type Mikrotik...

Tom mozerd, can todays smartphones connect to wifi6e? YES There are some smartphones that support Wi-Fi 6E. Such as: Google Pixel 6 Samsung Galaxy S21 Ultra Redmagic 6s Pro Samsung Galaxy Z Fold 3 Motorola Edge (2021) Pixel 6 Pro Asus Zenfone 8 ROG Phone 5s However - at this time , there are zero 6...

February 10'th 2022 9:45 AM PST-- the public access btest server is now running CHR ROS version 7.1.2 ( Prior - it was running ROS version 7.1.1 ) IPv4: 23.162.144.120 IPv6: 2605:6340:0:1b::4 btest username: btest btest password: btest Note; To use this Mikrotik public access btest server , you agre...

From and OEM perspective 6E is where all the action is ... From a consumer perspective - in Asia, and Canada/USA 6E is flying off the shelves but supply is very limited so prices remain high -- Netgear Orbi 960 Series leads the 6E parade by a country mile .... I believe the Orbi 6e is likely the fa...

Allow for volatile changes to the configuration. E.g. add a keyword "volatile" or "volatile=yes" to each configuration command, and when this is passed to a configuration item it is applied to the running router but not saved in the flash, so it will be lost at the next reboot. ...

I was in a webinar last week where they said that 6e wasn't approved for full power outside yet. Need to see if I can locate the slide. A wireless router ( Mikrotik ? ) 6e full-power or any power would help most customers with in-home wireless routers ( especially multiple wireless routers in a lar...

re my post dated Fri Mar 05, 2021 11:05 pm ... Re: 6E ( Wi-Fi 6E ( 5.925 GHz to 7.125 GHz ) The ISP/WISP I work for is federally recognized as tribal sovereign nation. We have a huge need for a reliable and fast communication system ( including Internet ). Our 5-GHz WISP system was nearly saturated ...

Is it better to use pf sense or mikrotik? Both are good. I have dozens of PfSense servers and dozens of Mikrotik CHR servers. IMO , if you are going to be performing NAT444 at over 2.5 Gig rates , then Mikrotik CHR is faster. PfSense is move friendly when migrating from one hypervisor to another ( c...

The 433 is pretty old.
Even if the price was $1 ( or free) , I think I would still pass.

Tested on January 25th 2022, results are Tx 94.6 Mbps Rx 81.9 Mbps. This test server is a proof that it's my provider who's limiting my connection to 100 Mbps, not my router (I'm paying for 600 Mbps now). Whoa - one moment here ... If/when you are performing a btest using tcp , there is normally a ...

Safe mode will not help you when making thousands of changes, its undo buffer will have overrun long before that. (I think it can only contain about 20 commands, maybe less) Unless you have a very powerful router, having so many rules likely will result in performance problems. Maybe it can work wh...

EDIT - have you ever tried pasting in 63-thousand lines of code into any server , especially a Mikrotik ??? Over 7 MEG of text in a single paste. The possible buffer-overruns is huge ! It would be silly to do that. Upload it as a file and then /import it. Or make a script that auto-generates the co...

Feature requests - NAT444 new rule type I would like to see a new feature that is directly related to NAT444 Currently , to perform NAT44 ( not NAT444 ) , where a CGN IP address /21 block ( example 100.64.0.0/21 - aka 8 consecutive Cs ) is mapped to a live IP /30 ( 4 consecutive Cs ), only one line ...

One good thing for me is that it is super easy and quick to lookup and identify what customer is being referenced when I now get one of those copyright notices where some customer downloaded a copyrighted movie. These notices provide two pieces of information ( Live-IP-Address and the Port-Number )...

Follow up So far , I have converted about 5 or 6 CGN networks/vlans ( 100.64.x.y/21 ) from normal NAT44 to NAT444. In all cases, I am getting reports that customer networks are working better and that some things that did not used to work now work ( now work with NAT444 ). I am using 250 ports per N...

Well - I think I finally got my NAT444 working I was able to get the Mikrotik terminal-function addNatRules working. ** I did not know what a terminal-function was or how to use one - but I kinda know now ... *** Here is what I have done that is now working: - At this time , I have two /21 CGN (100....

you really have to have a look at the netmap. single translations will kill your router's cpu. Netmap for CGNAT is some sort of Brainfuck, sure. But it's worth the effort. I did some reading on Netmap. From what I read , it looks like Netmap is better suited for a 1:1 translation. I am trying to do...

Looking at the tea leaves, my guess is that MT will provide their RoS in combo with wifi6 or at least announce products by the end of the year,,,,,,,, which is not unreasonable considering supply chains etc....... They seem to be very calculating in what they do and chasing technology is a very exp...

you really have to have a look at the netmap. single translations will kill your router's cpu.

Netmap for CGNAT is some sort of Brainfuck, sure. But it's worth the effort.

I am re-looking at doing this with Netmap.
I sure wish I could find a working script

North Idaho Tom Jones

If anybody wants to take a look at this , I created a Linus shell program ( a draft early beta version ) of the addNatRules This runs on a Linux system - not on a Mikrotik At this time - I do not have any action=jump lines in my code ( so if it works , it might be slow ) If beta version appears to w...

Excuse my ignorance TOM, but do you mean that customers are limited to access only X number of ports (inbound and outbound)? Put in another way they can only run servers on a choice of 8000 ports or is this simply an allocation schema for WANIP and port association to the WANIP. I have no clue in g...

1'st , thanks for your input and thoughts. I have two types of customer networks. - 1'st type is Live IP WANs with optional routed Live IPs ( for my static IP business accounts ). - 2'nd type is my standard CGN customers where: Close to 2-thousand DHCP ( Mikrotik wireless customer CPE DHCP-Client Wa...

sup5 , thank you for your input Yesterday , I said F-it with the script function and started typing the mt CGN-nat configuration into a txt file. Then I had a thought:\ - If I have 12 /21 CGN networks ( 100.64.x.x /21 ) and I am natting each /21 network to 8 or 16 Live-IP addresses , that is a whole...

Related to my question addNatRule

What is a good working amount of ports to use ?
I have seen several documents about addNatRules that show 100 ports and some at 10,000 ports.
So , I ask, what is a decent number of ports that will probably work ( 250 ports per CGN IP address ? ) ??

CGN NAT ( NAT444 ) help I am asking for some help. I need to configure NAT444. I have found several examples to configure NAT444 using a "addNatRules" function. Example: in the Mikrotik Wiki --> https://wiki.mikrotik.com/wiki/Manual:IP/Firewall/NAT#Carrier-Grade_NAT_.28CGNAT.29_or_NAT444 T...

Hey Tom, you are almost Canadian! ;-) I would come visit but its just like visiting any Province............. not like let say the Red Rock of Sedona Arizona which cannot be experienced just anywhere. However, I could be convinced! What are some of the attractions in your neck of the woods, Around ...

Hi Tom, Is the server still up? the server is unreachable, while traceroute result show i was able to reach your router but not the btest server, thanks! traceroute to 23.162.144.120 (23.162.144.120), 30 hops max, 60 byte packets 1 _gateway (192.168.68.1) 6.056 ms 5.885 ms 6.761 ms 2 192.168.168.1 ...

No, we have an EIRP limit here, which of course means you can run higher TX power on lower gain (thus wider beam) antennas. But the EIRP limit is fixed: 30dBm on channel 100-136 in/outdoor, and 23dBm on the indoor-only channels (low 5GHz channels and also now on 6 GHz). There is an exception: it is...

I have a new product feature request which I think Mikrotik should consider. - An outdoor tri-band ( 2.4-Ghz & 5-GHz & 6-GHz Wi-Fi 6E ) outdoor AP In Europe, 6 GHz WiFi is only allowed indoor on low power (200mW EIRP). Not much use for an outdoor AP here, unless you want to illuminate an en...

Re any changes in forum response time and any different routes ... On December 22'nd and today , I ran some IPv4 and IPv6 pings and traceroutes to Mikrotik. In my view here in North Idaho, the forum is still a little sluggish. Today , the IPv4 ping response time to Mikrotik's 159.148.147.239 ( forum...

I have a new product feature request which I think Mikrotik should consider. Two new AP products with the following features: - An indoor tri-band ( 2.4-Ghz & 5-GHz & 6-GHz Wi-Fi 6E ) indoor AP - An outdoor tri-band ( 2.4-Ghz & 5-GHz & 6-GHz Wi-Fi 6E ) outdoor AP - An outdoor dual-ba...

This morning December 22'nd 2021 , the forums are almost unresponsive. The problems started around a few days ago. There is now a 6+ second delay on anything I click on in Mikrotik's forum.mikrotik.com Not sure - but from my point-of-view , it looks like it is falling apart somewhere near the Mikrot...

Hey Mikrotik We need Wi-Fi 6E to survive in our WISP businesses. Almost all cell phone companies are using LTE-U ( 5 GHz band ) on their towers and they are stomping on almost everything in the 5 GHz band !!! This is killing outdoor 5 GHz links to customers and it is also killing in-home 5-GHz wirel...

The Mikrotik web site and forum both appear to be sluggish the last day or so.
It's like it is having problems getting an established TCP connection to talk.

Re: RouterOS version 7.2rc1 Can somebody shed some light on the following new features ? *) winbox - added support for "Tool/Speedtest" menu; The /tool/speed-test now has a UI in winbox in the "Tools" menu: https://i.ibb.co/NVtBK5H/Screen-Shot-2021-12-21-at-8-45-18-AM.png Now th...

Re: RouterOS version 7.2rc1
Can somebody shed some light on the following new features ?
*) winbox - added local/remote CPU load parameters for "Bandwidth Test";
*) winbox - added support for "Tool/Speedtest" menu;

December 21'st 2021

I just upgraded the public access btest server from 7.1 to 7.1.1

North Idaho Tom Jones

Re 7.1 Two days ago, I upgraded a remote site ( NetPower 16P -and- 5 nv2 APs -and- two 802.11 WDS links to 7.1 ). ( I did not upgrade any wireless customers to 7.1 ) Things went horrible... - I could not achieve a reliable Winbox connection to anything ( my equipment or any of my remote wireless cus...

Mikrotik Wi-Fi 6E I could sure use some additional frequencies for my Mesh networks - the existing 5 GHz band is congested, noisy, slow and competing with cellular LTE-U (#46). There is no such thing as a clean 5 GHz channel these days. Wi-Fi 6E offers the additional capabilities: 59 additional 20 M...

wifi-6e ---> NetGear Orbi WiFi 6E ( This is the fastest of the fastest Mesh system available for any home --- nothing is faster ! )) If you want speed , read-up on Wi-Fi 6E and the 2.4 & 5 & 6-7 GHz band Yes, but its not affordable.............. Product choices of wifi6e needs to proliferat...

I'm waiting Mikrotik to eventually come out with anything that supports Wi-Fi 6E wifi-6e = not home budget wifi-6e = serious wisp equipment wifi-6e ---> NetGear Orbi WiFi 6E ( This is the fastest of the fastest Mesh system available for any home --- nothing is faster ! )) If you want speed , read-u...

I'm waiting Mikrotik to eventually come out with anything that supports Wi-Fi 6E

For starters:
- On both of those Dyna Dish systems, use frequencies as far apart as possible.

You might try something like this:
On the lowest frequency , try eeeC
On the highest frequency , try Ceee

fyi - that pipe sticking out through the roof looks like a water leak waiting to happen.

Grrrrrr ! I just went through this mess ( prior to looking at these forum posts ) and was beating my head against a wall trying to figure out why I could not follow the NAT444 procedure located at: https://wiki.mikrotik.com/wiki/Manual:IP/Firewall/NAT#Source_NAT Grrrrrr ! So , is there any valid wor...

Dec 2'nd 2021
I just upgraded the public btest server I manage/host.
from: 7.1rc7
to: 7.1 (2021-Dec-01 16:07)

North Idaho Tom Jones

Re WiFi 6 & WiFi 6E ( 5.925 GHz to 7.125 GHz )

IMO - These additional frequencies would be clean & quiet ( low noise ) for WDS backhauls, especially in a very busy high-noise 5 GHz world. (( in-home Mesh or outdoor point-to-point or or outdoor APs ))

mozerd - thank you for your opinion. IMO - in a large home ( example - my home is almost 6k square feet ) a proper and decent wireless mesh system needs 2.4 GHz and 5 GHz and 6 GHz./ WiFi 6E mesh system. 2.4 GHz ( 2.412 GHz through 2.462 GHz ) 5 GHz ( 5.250–5.350 GHz and 5.470–5.725 GHz ) 6 GHz ( 12...

@mikrotik PLEASE give us any future prospects!! I do not want to see mikrotik getting thrown out of the installations! I've also been waiting for anything new or any news from Mikrotik that is 6 GHz and/or Wi-Fi 6e ( 5.925 MHz to 7.125 MHz ) (( indoor and/or outdoor products )) Related - the Netgea...

CCR2116 supports L3 Hardware Offloading . In some cases, it can route packets at close to 10Gbps speed while keeping the CPU idle. raimondsp ; Re "... route packets at close to 10Gbps ..." Routing ( without any firewalls ) at close to 10Gbps can be a very low CPU intensive process. Howeve...

Another reason I prefer CHR on XEON processors is the following: We do a lot of CGN-NAT. We normally average 70-thousand+ CGN-NAT translations going through the CHR and we easily exceed 3.8 Gig CGN-NATted throughput on our primary CGN-NAT CHR router while the Xeon CPUs all show under 20-percent util...

x86 processors At my ISP/WISP business , we use a dozen=plus Mikrotik CHR ROS routers ( running on fast XEON processors under VmWare ESXi. Almost all of my CHRs can UDP btest to 127.0.0.1 ( local internal CHR IP address ) and hit nearly 999-Gig throughput. I've never seen a physical Mikrotik even co...

I updated the btest server from from 7.1rc6 to 7.1rc7
North Idaho Tom Jones

November 8'th 2021 -- Upgraded from ROS 7.1rc5 to 7.1rc6

North Idaho Tom Jones

re download size on chr IMO - I suggest when spinning up a new CHR , prior to first CHR power-up -- always increase the hard disk size. I believe a CHR ( on VmWare ESXi ) can be sized to 16-Gig. Then on CHR first power up , it will auto resize the the CHR disk to properly use a larger disk. Thus , w...

On the topic of public access btest servers ... It would be nice if Mikrotik operated an official Mikrotik public access btest server. It wouldn't need to support Gig+ btest speeds ( although that would be nice ) . Even it was max rate limited to 10 or 100 Meg peak btest traffic , I bet it would be ...

Hi, I just enabled a bandwidth test over a 1gbps ftth line Check it and tell me if something is nor working. Location: Spain IP: xxx User: btest Pass: btest Max. connections: 100 Edit: I shutdown the bt server, it's imposible to play online when anybody do a test. Re: ... I shutdown the bt server, ...

Re: v7.1rc5 [development] is released! FYI: October 27'th 2021 ( ROS version update notice ): Today , I upgraded/replaced the public access Mikrotik CHR btest server today to Mikrotik's newest/latest ROS 7.1rc5 ( Development ) ROS version from the known/working ROS version stable 6.49 So far , this ...

EDIT: October 27'th 2021 ( ROS version update notice ): Today , I upgraded the public access Mikrotik CHR btest server today to Mikrotik's newest/latest ROS 7.1rc5 ( Development ) ROS version from the known/working ROS version stable 6.49 Note: As of this post - I have NOT tested or verified this RO...

When a Mikrotik CHR ( with the license ) is moved to another location on the hypervisor or to another hypervisor ( either manually or by automatically ) the new spun-up CHR will no longer retain the original license. There are two possible work-arounds options to retain the license ( for a CHR move ...

IPv6 Mikrotik's SLAAC - DHCPv6 ( asking for some help )

FYI - I wish Mikrotik would add a dedicated IPv6 section to their forums where only IPv6 related topics can be discussed. Right now - Mikrotik IPv6 topics are anywhere and nowhere.
+100

+100.9

Hi Tom.

This is the result from:

Country: Colombia.
City: Bogotá D.C.
ISP: Azteca Comunicaciones.

Resultado_23-162-144-120.JPG

Thanks for this amazing service!!

Hey - what ever you are doing - you are doing it well

Thanks for the post
North Idaho Tom Jones

Heads up I just now upgraded the btest server I manage from: version 6.48.4 to: version 6.49 IPv4: 23.162.144.120 IPv6: 2605:6340:0:1b::4 btest username: btest btest password: btest Note; To use this Mikrotik public access btest server , you agree to the following terms and conditions: #1 - You will...

From my new Frontier fiber at home in Glendora, Calif, USA (near Los Angeles) into a RB40111GS+ In case you can't see the image, there is a link to it. http://extraphotos.info/mikrotik/SpeedTest_2021-10-01.png http://extraphotos.info/mikrotik/SpeedTest_2021-10-01.png Glendora CA - I used to live th...

How can I limit the bandwidth for the bt server? When I'm playing online games and somebody does a speed test it kills my connection. I am not sure I understand your question. Are you asking how to limit bandwidth to the public access Mikrotik btest server I manage ? - When you run a btest, there i...

Interesting.... The Public access btest server ( IPv4 23.162.144.120 / IPv6 2605:6340:0:1b::4 ) CHR ROS upgrade from 6.46.3 to 6.46.4 with no issues detected. I have been having some problems with two Mikrotik routers running some interfaces with large MTUs where the remote Mikrotik with the larger ...

Monday 8/23/2021
I updated the public access btest server I maintain from CHR ROS version 6.48.3 to 6.48.4

If you experience any issues/problems with the newer CHR ROS version 6.48.4 version now running on this btest server , please let me/us know.

North Idaho Tom Jones

Hi, I just enabled a bandwidth test over a 1gbps ftth line Check it and tell me if something is nor working. Location: Spain IP: 85.57.168.156 User: btest Pass: btest Max. connections: 100 I ran some btest's from my 23.162.144.120 public btest server to your 85.57.168.156 server. I was unable to do...

jedan71 You mention GPON I would like to ask what are your plans with GPON and Mikrotik ? Are you planning on inserting a SFP GPON module into a Mikrotik with the intention of using the Mikrotik ( with SFP GPON module ) as a remote ONT ( remote client GPON device ) ? Or - are you planning to use the...

jedan71

yowzers !
nice bandwidth

North Idaho Tom Jones

I'm a big fan of complex networks - however ... I always prefer lots of small, fast easy-to-understand components in the network instead of large do-everything components. With large do-everything servers, when something fails , then everything fails , which often results in lots of time trying to f...

Sorry bout that...
I had a network melt-down late last week. I powered-off the btest server during the melt-down.
It is back up and on-line now.

North Idaho Tom Jones

btest notice: This morning, I moved the public btest server to another VmWare ESXi server. This is a Mikrotik ROS x86 router ( dedicated for remote btest tests ). This was running on a VmWare ESXi 6.7.0 hypervisor and was just-now moved to a VmWare ESXi 7.0 hypervisor. I think the Mikrotik ROS x86 l...

Re: ... doing unattended updates is just madness in the production environment ... Well , if you have the staff and the time and the money ( or have no experience and only 10 customers ), I suppose it is possible to manually update hundreds to thousands of Mikrotik devices one at a time. My issue wi...

IMO I don't think it is a good idea to have an automatic schedule script that checks for updates then auto updates if/when a newer version is available. I will always manually do a test upgrade/update on some Mikrotiks that I can afford to loose or brick. Then after a day or so , if everything looks...

To mass upgrade thousands of Mikrotiks with the push of a button , I do this: I use a Linux ( Ubuntu ) computer. It has the following scripts: - site survey ( including site-survey on remote wireless client Mikrotiks ) , save results on my Linux server. - Get information from remote Mikrotiks ( anyt...

For fast routing try this: Instead of using a physical router, try x86 ROS or CHR. x86 is a 32-Bit Mikrotik ISO ROS install on a bare metal ( generic ) PC motherboard. CHR is a virtual 64-Bit Mikrotik ROS that runs on a hypervisor based computer ( such as VmWare ESXi ). Needed for CHR: - Intel Xeon ...

" ... a note to all Mikrotik admins who btest to the 207.32.195.2 ... " The 207.32.194.2 IP address is an old IP address for the btest server I manage. The correct and updated IP addresses to this btest server are as follows: IPv4: 23.162.144.120 IPv6: 2605:6340:0:1b::4 btest username: bt...

osc86 write: Like an inverted safe mode. Then create a backup and a scheduler with +1h who do a load of this backup. You can do many disconnection in this 1h time and you have a safe information that in 1h if you not disable this scheduler then it came back to proper Point Of Time with reboot. I've...

Well ... when it comes to hardware - software - firmware - features and cost ... . I guess I am more of a "How do I do it" person and not a "I can't do that because it's to hard" person. Back in the late 1970s and 1980, I started a computer manufacturing company ( IBM PC not inve...

I guess what I am asking for , is a Mikrotik ONIE compatible x86 ROS with optional ASIC drivers. Then I could install x86 Mikrotik with the correct ASIC package on some ONIE switches - such as the one in this picture ( qty 64 100-gig ports ) or any other x86 CPU based ONIE switch which has an option...

Are you not under-estimating the effort? It should be easy to make a RouterOS version that runs on the management CPU, but it should also be able to manage the switching ASIC in use in the product. When your switch has switching hardware that MikroTik does not already support because the same chips...

ONIE ( bare metal switch ) First - some quick background information: * Mikrotik has a couple of decent Router Operating Systems ( ROS ) which work well and can run very fast routing functions when installed on generic x86 hardware systems. * X86 ROS is a 32-Bit stand-alone ISO installable Router Op...

What would be nice - but will never happen - would be for these notices to also include the remote IP address. It would be great and useful if these notices included both ends of the connection ( show local and remote IP address and ports ). But - I know these notices will never include that informa...

Syslog to log NAT/CGN-Nat translations I hope somebody knows to the answer to the question I am asking. Can I and how do I , log ( syslog and/or syslog to a remote syslog server ) all NAT translations ? Like many ISPs and WISPs , we get copyright notices which state somebody at an IP address downloa...

Hi Tom, Greetings from Ohio! Since I used the btest for the first time (and Mikrotik), I accidentally ran the test more than a few times while trying to troubleshoot an issue in frustration and now it no longer works, possibly being banned at your end. Would you be able to unblock? I apologize for ...

I would really like to see SwOS as an available package for ROS. Where all Ethernet switch functions are handled by a SwOS package in ROS. Where you can Winbox/mac-winbox ( or telnet, mac-telnet, ssh or HTTP ) to ROS , then navigate to SwOS. And , have the default un-configured SwOS switch all ports...

Wifi 6 when? I am starting to wonder if Wi-Fi 6 or Wi-Fi 6e is even on the road map. Over a year ago , the FCC opened up the 6 GHz band (5.925–7.125 GHz) and made it available for unlicensed use. More than a year later and total lack of any official Mikrotik information, I can only assume there are...

IMO , although most DC powered Mikrotik devices show a voltage range for operation , you should avoid running your Mikrotik at the lowest voltage. If you are operating at the lowest voltage , then you are border-line of being below the proper voltage and you can create problems. The Mikrotik will of...

Here is a decent URL I check into from time to time to what's happening with any new Wi-Fi news.

https://www.wi-fi.org/discover-wi-fi

It would be welcome to hear any official information from Mikrotik on Wi-Fi 6E . Contact support@mikrotik.com directly instead of asking on users forum Re: ... Contact support@mikrotik.com ... Hey what a good idea. Been there & done that a few times & I still have no idea if/when a Wi-Fi 6E...

It would be welcome to hear any official information from Mikrotik on Wi-Fi 6E . Contact support@mikrotik.com directly instead of asking on users forum Re: ... Contact support@mikrotik.com ... Hey what a good idea. Been there & done that a few times & I still have no idea if/when a Wi-Fi 6E...

It would be welcome to hear any official information from Mikrotik on Wi-Fi 6E.

I left some tests running today which exceeded the 30 second timer. Would just like to apologise for any inconvenience caused.

:)

It's OK , the btest system will timeout and reset

I am trying to run this test against 23.162.144.120 (user\password btest) on a MikroTik R11e-LTE6. The BTest server respond to the ping request, but the band test fails (can't connect is the message). The MikroTik has just the local IP address configured and the LTE APN, of course... no other custo...

Yea - can't ping it.

I turned it off yesterday when I was having strange network problems.
I will turn it back on in a few minutes.

North Idaho Tom Jones

Mikrotik btest servers and how I use my btest servers in/for my customers: I have two Mikrotik btest servers. #1 , One of them is the public btest server you may already know and use ( IPv4: 23.162.144.120 and IPv6: 2605:6340:0:1b:: 4 ) #2 , My other non-public btest server is inside my network and ...

Well - yes --- it is always possible to do some fan modification/changes to get the type of cooling you desire. For me, the issue is not cooling. For me, the issue is getting up to or greater than 7 days of backup battery run time when the power goes out. Typically a 110 VAC UPS powering a some Mik...

I think the concept has merit but I would worry about cooling. The application of this high density switch worries me due to a single point of failure. Re cooling: In my opinion , a router/switch with an internal power supply will always run warmer/hotter than an identical device with an external D...

I think the concept has merit but I would worry about cooling. The application of this high density switch worries me due to a single point of failure. Re cooling: In my opinion , a router/switch with an internal power supply will always run warmer/hotter than an identical device with an external D...

Mikrotik ROS does not have a IPv6 DHCP server ( something I really wish they had !!! ) If you need an easy/free IPv6 DHCP server , take a look at PfSense. PfSense is free PfSense is based on FreeBSD PfSense is available as on ISO. You simply boot the ISO to install the FreeBSD system with PfSense (...

Re: ... I love this part ... reboot this Mikrotik There are times that network devices need to be rebooted and/or have their links bounced. I prefer my watchdog script(s) because I have user-definable timeout variables which allow me to know I am avoiding un-necessary watchdog reboots. The scripts I...

Question to those with near 10-Gig Internet connections In a week or month ( sometime ) , I will be turning up a new additional 10-Gig Internet connection. Prior to me placing this in my network , I am considering configuring a new 2'nd full 10-Gig wide-open btest server on the new circuit, then al...

Mikrotik ROS does not have a IPv6 DHCP server ( something I really wish they had !!! ) If you need an easy/free IPv6 DHCP server , take a look at PfSense. PfSense is free PfSense is based on FreeBSD PfSense is available as on ISO. You simply boot the ISO to install the FreeBSD system with PfSense ( ...

Good morning ( Wednesday 05/26/2021 ) I just now upgraded the ROS 6.48.2 on the btest server to the new ROS 6.48.3 If you encounter any issues , please post. North Idaho Tom Jones IPv4: 23.162.144.120 IPv6: 2605:6340:0:1b::4 btest username: btest btest password: btest Note; To use this Mikrotik publ...

I LOVE this. Keep up the good work Tom. If Mikrotik won't sell a DC power kit for these, you should! I'd buy!! For the heck of it , I started a battery run-down test using a new set of marine deep-cycle batteries that were not fully charged yet. I canceled the battery run-down test after two and 1-...

LoneRager , I just now checked the btest server 30 seconds ago prior to posting this reply. Yes - the btest server is up and running. When I checked it - there were two different remote btest(s) running ( 100-Meg each btest ). Now a minute later it is idle again. Can you ping the btest server ? Nor...

LoneRager , I just now checked the btest server 30 seconds ago prior to posting this reply. Yes - the btest server is up and running. When I checked it - there were two different remote btest(s) running ( 100-Meg each btest ). Now a minute later it is idle again. Can you ping the btest server ? Nor...

I cannot ping the BTest server from any of my locations across Czech republic (all different IP ranges) 93.99.x.x, 217.29.x., 37.11.x.x, 89.176.x.x Needless to say I cannot run a btest I suspect you have a firewall at or near your location blocking access. Would you please reply with a traceroute t...

24V-DC-Mod-on- CRS354-48P-4S+2Q+ Said I was gonna do it - and I did. Now I have a 48-Port PoE out Mikrotik switch ( and four sfp+ and 2Q ) being powered by an external 24-Volt DC-UPS. This is the perfect solution for one of my remote mountain-top towers where I need about 24 PoE ports and another 24...

LoneRager , I just now checked the btest server 30 seconds ago prior to posting this reply. Yes - the btest server is up and running. When I checked it - there were two different remote btest(s) running ( 100-Meg each btest ). Now a minute later it is idle again. Can you ping the btest server ? Nort...

well mducharme , I wish you the best of luck getting a 3'rd party GPON module working in a Mikrotik. At first with my Mikrotiks and sfp modules with the GPON electronics, I had to play with the Adtran configs to get 802.1q trunks running. Access-vlan was straight forward , but I was also trying to m...

so mducharme , may I ask you if you know of any sfp GPON modules that work in a Mikrotik ( in an air-tight nema outdoor enclosure ) that have been proven worthy of standing up to warm/hot summer days ? Some of the reasons I want to re-look at a clinet Mikrotik with a sfp GPON module in my GPON netwo...

I would prefer installing and using a Mikrotik/router/sfp-GPON-module ONT solution verses the GPON ONTs I am already installing ( sometimes up to 10 a day ). Don't you use Adtran Total Access OLT's? I believe Adtran makes a GPON ONT SFP module. There is information on the module here: https://suppo...

I would prefer installing and using a Mikrotik/router/sfp-GPON-module ONT solution verses the GPON ONTs I am already installing ( sometimes up to 10 a day ). Don't you use Adtran Total Access OLT's? I believe Adtran makes a GPON ONT SFP module. There is information on the module here: https://suppo...

I for one would like to see Mikrotik come out with a sfp GPON module - again . However , this time a sfp GPON module that can be installed in a Mikrotik router where the router/module is mounted in an outdoor ( air-tight ) nema case. Although the first run ( now discontinued ) sfp GPON modules all d...

Not all sfp GPON modules are the same. Most sfp GPON modules will only work in a device that understands GPON. There are some sfp GPON modules which have the GPON electronics/firmware included in the module so that they can function in most sfp devices and then participate in a GPON fiber network. ...

Not all sfp GPON modules are the same.
Most sfp GPON modules will only work in a device that understands GPON.
There are some sfp GPON modules which have the GPON electronics/firmware included in the module so that they can function in most sfp devices and then participate in a GPON fiber network.

Re unwanted WatchDog reboots. I do not use the ROS WatchDog settings/function. Instead, I use the NetWatch feature to trigger a script if/when a NetWatch ping fails. The script then enters a count-down loop which is something like this: #1 - Log date/time & message & Loop-Count variable to l...

The DC harness after I installed the wire protective grommet.

North Idaho Tom Jones

Re: I think that Mikrotik should put a DC terminal block on all typical non-home devices (like the CCR/CRS'es) Or offer an optional retro-fit wire harness to convert from AC power to 24/48 DC power - and include simple instructions explaining how to remove & replace the AC power supply with an o...

Oooo - I forgot to put the pass-through wire protective grommet where the AC power connector used to go. That will get done soon. Also , the ALG 24-Volt DC-UPS is the SNMP network version. So I can get and graphs current loads, charge/discharge loads and utility-power/battery/DC-output voltages - an...

24V-DC-Mod-on- CRS328-24P-4S+RM WARNING - doing this mod will void your Mikrotik warrantee - if you do so - you do so at your own risk ! A little background info first: I run a fiber-to-the-home ISP and a WISP. I have a dozen-plus remote towers and four mini-NOCs. My mini-NOCs and most of my remote ...

sw os released for CRS354. upgrade your routeros to testing version. then run following command /system swos upgrade after this go here System >> RouterBoard >> set boot to SwOS Done Good post re /system swos upgrade I had a 354 which I gave up on getting SwOS running on - so I placed it in the Mik...

Re - CHR and Virtual Servers ... Soon , I will be looking for some physical bad-as VmWare ESXi servers ( fast - lots of cpu cores and lots of RAM ). RAM - minimum 1,024 Gig of ram , ( desired 2,048 to 4,096 Gig of ram ) Physical Intel Xeon CPUs - 2 or more - , minimum total cores 80 ( prefer 100 to ...

Aloha North Idaho Tom Jones, I live in Hawaii on the island of Oahu and just upgraded to Hawaiian Telcom's 750Mbps/300Mbps plan. Here are my test results for today, Friday, 23 Apr 2021, at ~0200GMT. The test was for 30s, bi-directional, UDP, using my MikroTik RB4011IGS+5HACQ2HND-IN. status: done te...

Hello,
How long does it take for MT tech support to respond?
I created a request a month ago but still no response.

They are usually really good about responding in one or two work days.

The reason there are so many switch chip discrepancies is because the Big Mik cuts costs by only giving you what you need, and that "need" changes depending on the device, unlike Cisco/other-vendor-here which gives you all the features as well as all the costs. I almost agree. Take Cisco ...

I love Mikrotik routers and wireless devices ! However ... When it comes to switching using ROS ( using the ethernet switch chip -or the CPU for software switching ) , the Mikrotik ROS CLI & http & Winbox is just horrible ! For example - try doing this: - Let say you have 5 to 48 ethernet-an...

I had a similar issue with a Netonix switch ( no 10-Gig on the Netonix ) , I had a 10-gig fiber going to a Mikrotik RB04011 - then I was trying to LAG / bond multiple 1-Gig ports between the two devices. Bottom line is I was not happy with the results because the bulk of the traffic always preferred...

Hmmm - it looks like ROS does support USB Ethernet Controllers (

Mikrotik-USB.png

never had a reason to check[/i] )

interesting Never thought much about testing a USB--Ethernet cable in a Mikrotik with a USB port ( because I figured there would not be any driver support in ROS ). So ... If you plug in a USB hub , then plug in two of those USB--Ethernet cables , what to you get ? If you plug in a USB--Serial-RS-23...

FYI - btest server was just now upgraded from ROS version 6.48.1 to the just released ROS version 6.48.2 If you encounter any issues with the btest server now running 6.48.2 , please post them here. IPv4: 23.162.144.120 IPv6: 2605:6340:0:1b::4 btest username: btest btest password: btest Note; To use...

Graphing IPv4 and IPv6 Traffic Traffic is traffic when it comes to SNMP graphing traffic on a Mikrotik. One thing you can do is put your IPv6 routes/interfaces on non-IPv4 interfaces ( then if needed bridge them together ). Then graph your IPv4 interfaces and add additional graphs for your IPv6 inte...

Well, this is getting fun. I have now blocked 176.0.0.0-201.0.0.0. Sorry for the inconvenience to the rest of my fellow testers.

Best

Try it again , I just cleared out the Address-List of recent testers

North Idaho Tom Jones

1'st ; The Mikrotik mUPS is a discontinued product. In my opinion, the 700 mA power limitations was nowhere enough to power any NetPower device or any multi-port POE-out devices with multiple devices getting POE power from a single mUPS. 2'nd ; I would like to see a mUPS version 2 product that is lo...

Same problem here. I pulled two of the Mikrotik PowerBox Pro units from my inventory ( still in the un-opened boxes ). Non of the ethernet interfaces have any POE-out setting ( POE does not show up in the Winbox menu on the ethernet ). Grrrrrr ..... #!fkit-!!! QA inspection and testing on these prod...

wireless-user-limit.png

I wish SwOS and ROS were combined into one system Both SwOS and ROS have their merits, strengths and issues. I would really like to see a new combined system "ROS-SwOS" system where all switching was removed from ROS and then the entire SwOS system was fully incorporated into ROS. ROS ; vl...

Here is a basic rule:
If you are are to hot or cold in the same room with computers/networking devices, the electronic network devices might also be to hot or to cold.

FYI - Just thought it may be interesting to know .... On average , there is always one or two Mikrotik admins somewhere performing a btest to my btest server. Sometimes I will see the btest server with 5 to 10 different btest connections running. Sometimes, I will drop the max btest bandwidth limite...

Thanks, from UK connection: status: done time-remaining: 0s ping-min-avg-max: 144ms / 145ms / 147ms jitter-min-avg-max: 1us / 131us / 2.98ms loss: 0% (0/200) tcp-download: 1.42Gbps local-cpu-load:4% tcp-upload: 1.56Gbps local-cpu-load:13% remote-cpu-load:82% udp-upload: 2.09Gbps local-cpu-load:4% r...

Question: Is it possible to increase this to (-/+) 7-8 Volt. Answers: - As already stated by tdw , the voltage you are measuring is within spec. - If you know something about digital electronics, it's possible to build a small voltage converter. You will need a power supply that supplies the voltage...

Re: 6E ( Wi-Fi 6E ( 5.925 GHz to 7.125 GHz ) The ISP/WISP I work for is federally recognized as tribal sovereign nation. We have a huge need for a reliable and fast communication system ( including Internet ). Our 5-GHz WISP system was nearly saturated a year ago. When the Covid-19 pandemic started ...

What/were is the setting in the ROS filesystem/config that locks the device to a specific country code ? From what I can tell, it's saved on an EEPROM chip on the board itself. However, those chips are dead-easy to modify, so changing a US -> International could be as simple as opening the device u...

Search found 1503 matches