03km Bridge whit "OmniTIKU-5HnD"

Hardware MikroTik hardware general
1

Hi!
Can some one there Help me?
Want a ptmp link in 3 km with radius
I hope the “OmniTIKU-5HnD” and “SXT” clients will be a good solution.
Or can I Use the “GrooveA5Hn” whit and 12DBi Omni Antenna
Help plz! :confused:

2

Try a omnitik for 1 km with sxt client. The signal will be in 90’s range so no chance of 3 km. Use a Groove 5Hz with 16dbi sector for 3 km

3

why not? omnitik and sxt can work normally with over 1km, no problems. maybe you had interference and no line of sight?

4

So what if I use the “RB711-5Hn” With a 19DBi Antenna for client site connected to the “OmniTIKU-5HnD”

this is “line of sight”

5

if the client is Groove, you will be able to get 20Km link or more.

6

Here Client Is “RouterBOARD 711 5Hn-M” in a 19dBi Antena Enclosure

7

in that case, the same. 10-20km if contions are good.

aprt from line of sight, you also need to select the best frequency where there is no interference, and make sure you have good alignment, good cables, good pigtails, good config etc

8

“OmniTIK U-5HnD” 10Km with 7.5dBi Antennas?

9

OmniTIK U-5HnD ----------Bridge-------RB711-5Hn" With a 19DBi Antenna
10km?
If all the conditions are good

10

you can use this to calculate link possibility: www.mikrotik.com/test_link.php