Is is possible to have a Station and AP each on thier own radio card on the same routerboard (rb133ah) using the same subnet ? (ie back haul & Access point)
The equivalent of two CPE’s back to back with a crossover cable link between them.
(I even tried putting AP and eth2, and Stn and eth3 in two separate bridges and using a crossover to physically link eth2 & eth3- desparate measure !)
I have it working with the back haul on a diff subnet and EoIP running from the AP to a rb450g on my lan but the initial option would be a lot simpler ! I could save a dedicated AP on the backhaul and a valuable port on the rb450g !!
Puffer