Hi , eery body,
i need one link between 2 hils with about 110km.
point 1 3000mts osl, point 2 1200 mts osl, clear los between 2 points.
If any body knows if i can do that with 3 ft antennas, compex 200mw in 5ghz band, and rb 500, please help me.
or Any suggestion will be received.
Dimas
Assuming there are no obstructions between the two points (I.e clear fresnel zone) … this shot can easily be done with two xr5’s connected to 32.5 (3ft) dishes.
Expected rssi will be ~-58. - This will yeild a 54meg pipe.
It would also be best to use the nstreme protocol in this case as the ack timeout at such distances would hinder 802.11a/b/g’s performance.
It would great if you can provide a google earth screenshot or lat lon. to further clarify things.
Regards.
Very clear, but wath do you thin about compex mini pci cards?
Dimas
You need a high sensitivity, less noisy card. Compex cards are often called as bad junks and not advised for such setups.
For mini-PCI cards best bet are :
SR2
SR5
DCMA-82
DCMA-82 topping out in the list with a peak output of 1W in b/g and 400mW in “a” mode.
The choice is yours