Hi all, I have 2 mikrotiks that when I set the ether1 up to 192.168.0.12/24 I cannot ping from my PC. As soon as I change the ether1 to a different subnet (192.168.1.12/24) it pings fine..Is there anything wrong with using 192.168.0.0/24? Its wierd because even my arp table shows the correct mac address…its 3.10 RouterOS on a RB433
Cheers
Phil
Duh..I figured it out. Turns out that I had Juniper VPN software on the PC that was pinging the Mikrotik that had a policy that was denying traffic to the 192.168.0.0/24 subnet..
Cheers