Hello,
I need to create a hotspot pointing to a bridge with 2 interfaces, but I need both interfaces in different networks, for example:
Set 192.168.201.1/24 to ether2
Set 192.168.202.1/24 to ether3
Make a bridge between ether2 and ether3.
I connect many devices to ether2 (with a phisical switch) and I set statically an IP on 192.168.201.0/24
I connect many devices to ether3 (with a phisical switch) and I set statically an IP on 192.168.202.0/24
Will it work?
I know I can just use 1 interface and set both IPs to the same interface, but I prefer to dont do this to be prolix
Is there another way to dont create 2 hotspot?
Thanks in advance.
Regards
Damián