I am curious if anyone has any experience using 2 SR2’s and 1 SR5 on a RB433AH.
I’m wondering the cards may require more power than the board can supply.
If anyone has any experience with this combination of cards on a 433ah please let me know if you have experienced any issues or not.
It would be greatly appreciated!
I guess u wont have problem with a good PSU
I plan on using a pacwireless POE-24i
POE 90-264VAC, Output 24VDC at .8A 12W
Auto ranging power supply/ inserter
Built-in ethernet surge protection to prevent equipment damage
Overload and short circuit protection
Minimum cross talk and insertion loss
Is it correct that the 433ah has a 16W maximum output to cards?
http://www.routerboard.com/pricelist/download_file.php?file_id=73
Yes, that is declare in documentation but actualy it’s higher. There is some mistake " Output 24VDC at .8A 12W " can you check it on PSU?
The only thing the POE-24i says on it is AC Input 100-240V and DC Output 24V/0.8A
PSU … Power Supply Unit?
24V x 0.8A =19.2W I think it’s enough for RB433 with three high power cards.