Hello,
We are currently using a Metal 2SHPn for a replacement AP that failed in the field.
The problem we have found is that we are using two VLAN’s in our setup. One (VLAN X) for management traffic for the AP and CPE’s, and another VLAN (VLAN Y) for Customer Traffic we are unable to
access our CPE’s via VLAN X unless we break VLAN Y.
INTERFACE BRIDGE PRIORITY PATH-COST HORIZON
0 ether1-vlanx bridge-x 0x80 10 none
1 ether1-vlany bridge1 0x80 10 none
2 wlan1-gateway bridge1 0x80 10 none
wlan1-gateway is the parent interface and ether1-vlanx and vlany are logical interfaces within the mikrotik that were created.
Basically we are trying to gain management access to our CPE’s which are addressed in the 172.0.0.x range in VLAN X and still have customer traffic flow over their inteded VLAN Y.
Kind of new to mikrotik’s so please be easy on me.
Thank you.