2 wan 1 lan but msn is logging out again again...

RouterOS Forwarding Protocols
1

I use RB450G with 2 WAN
Diagram is:
LAN1 → I rename this interface to WAN1 and connect it to First modem is (192.168.1.1)
LAN2 → I rename this interface to WAN2 and connect it to Second modem is (192.168.2.1)
LAN3 → maybe third modem
LAN4 → maybe fouth :slight_smile: soon…

LAN5 → LAN network port that connect to switch and bullet2 HP ( The users connecting from lan5)
I made a hotspot and the users can connect from lan5 to my router.

Everything was ok since i connected my second modem to my RB.
Coz some users disconnect from msn messenger and connect again and disconnect and connect…
I have to make some rules for load balancing.

Anybody help me? This is my first message. Thx from now.

2

Have a look at WIKI manual on PCC. http://wiki.mikrotik.com/wiki/Manual:PCC works well.

3

I’ll try this load balance type. Thx

4

Set the PCC type to src-address only. otherwise it can cause other problems with banking sites etc.

5

I can’t do please explain with pics or write how i do it?
I’m newbie :frowning:

6

I made it and when wan1 is disconnect then wan2 is active automatically.
BUT i wanna add wan1+wan2 to LAN port.

I mean wan1 is 10mbit and wan2 is 8 mbit

I wanna use to my computer 18mbit

How can i add these 2 wan’s

7

Btw i made it and works well. But i wanna add 2 interface to 1 port.
Wan1 + wan2 to lan5

8

Unfortunately, the highest speed you will get is the speed of ADSL with highest speed, unless you use multiple downloads, like with download manager, it might appear as though you get 18 meg. This is load balancing. For what you want to do you would need line bonding, however with line bonding you need control of both routers. Your side and isp side, which does not happen very often.