2 wan but 1 pc can use

RouterOS Beginner Basics
1

hi
i have 2 wan and i do one rule for only one pc can use wan1 and wan2.

 ;;; sortie olivier
      chain=forward action=reject reject-with=icmp-admin-prohibited       src-address=!192.168.2.150 out-interface=WAN2 log=no       log-prefix="olivier forward"

i don t know it s correct.

Br

2

hi,
no body :slight_smile:

just to know if is the good way

br

3

I guess I am a little confused.

I am running dual wan on my Hex (RB750g r3).

To force a certain PC to use only a single WAN, I force the marks:

[jbarbieri@MikroTik] > /ip firewall mangle print detail 

 ;;; Vic Laptop only ATT
      chain=prerouting action=mark-connection new-connection-mark=WAN2_conn passthrough=yes src-address=192.168.10.55 connection-mark=no-mark in-interface=bridge log=no log-prefix=""

Then everything else uses both WANs:

chain=prerouting action=jump jump-target=prerouting-mark connection-state=new 

chain=prerouting-mark action=mark-connection new-connection-mark=WAN1_conn passthrough=yes connection-mark=no-mark in-interface=ether1-zito 

chain=prerouting-mark action=mark-connection new-connection-mark=WAN2_conn passthrough=yes connection-mark=no-mark in-interface=ether5-att 

chain=prerouting-mark action=mark-connection new-connection-mark=WAN1_conn passthrough=yes dst-address-type=!local src-address-list=local dst-address-list=!local connection-mark=no-mark in-interface-list=LAN random=50 

chain=prerouting-mark action=mark-connection new-connection-mark=WAN2_conn passthrough=yes dst-address-type=!local src-address-list=local dst-address-list=!local connection-mark=no-mark in-interface-list=LAN 

chain=prerouting action=mark-routing new-routing-mark=to_WAN2 passthrough=no connection-mark=WAN2_conn in-interface-list=LAN 

chain=prerouting action=mark-routing new-routing-mark=to_WAN1 passthrough=no connection-mark=WAN1_conn in-interface-list=LAN

Are you trying to do something like that?

4

hi

sorry for late reply.

It s ok for me very thanks

a+

br