Hello,
I have got a problem with failover services:
ISP1 ------------public ip
RB ----- LAN (10.11.1.250:443)
ISP2 ----- 192.168.0.0/24
mangle
0 chain=prerouting action=mark-connection new-connection-mark=ISP2_conn passthrough=yes in-interface=ether2-WAN2
1 chain=prerouting action=mark-connection new-connection-mark=ISP1_conn passthrough=yes in-interface=INET-VLAN
2 chain=output action=mark-routing new-routing-mark=ISP2_rout passthrough=no connection-mark=ISP2_conn
3 chain=output action=mark-routing new-routing-mark=ISP1_rout passthrough=no connection-mark=ISP1_conn
route
0 A S dst-address=0.0.0.0/0 gateway=192.168.0.10 gateway-status=192.168.0.10 reachable via ether2-WAN2 distance=1 scope=30
target-scope=10 routing-mark=ISP2_rout
1 A S dst-address=0.0.0.0/0 gateway=a.b.c.221 gateway-status=a.b.c.222 reachable via INET-VLAN distance=1 scope=30
target-scope=10 routing-mark=ISP1_rout
2 A S dst-address=0.0.0.0/0 gateway=a.b.c.222 gateway-status=a.b.c.222 reachable via INET-VLAN distance=1 scope=30
target-scope=10
3 S dst-address=0.0.0.0/0 gateway=192.168.0.10 gateway-status=192.168.0.10 reachable via ether2-WAN2 distance=2 scope=30
target-scope=10
I like use a service (etc. https) but dosen’t work on ISP2, only works on ISP1.
I search on google but i don1t find only fail over example.
Why not working this?
THX