3.1 & nForce Ethernet

RouterOS General
1

I noticed in the changelog in 3.1 support was added for Nvidia’s nForce ethernet chips.
Does anyone know which ones are supported?

I have 3.1 installed on a machine with a nForce 2 MCP chipset and the it didn’t work.

I have included a portion of my output from the ‘/system resource pci print detail’ command:

13 device="00:08.0" name="MCP2A PCI Bridge (rev: 163)" vendor="nVidia Corporation" 
   category="PCI bridge" vendor-id="0x10de" device-id="0x008b" irq=0 

14 device="00:04.0" name="MCP2A Ethernet Controller (rev: 163)" vendor="nVidia Corporation" 
   category="Bridge" vendor-id="0x10de" device-id="0x008c" irq=9 memory=0xE0003000-0xE0003FFF 
   io=0xE000-0xE007

Perhaps only the newer nForce ethernet is supported, nForce 3 & nForce 4, etc..

2

I have nForce 2,3,4 mainboards testing tomorrow and post result.

Best regards…

3

nforce 3 board
nVidia Corporation CK8S Ethernet Controller (rev: 162)
dosn’t works

4

hello guys I’m testing MIkrotik 3.1 in my NF4 and nforce 430 motherboards, and the system not recognized the networks cards , I see in driver sections ( driver print), resorces… etc… and not appears.

what is the exactly model supported?

greetings Campano

5

nForce 2 and nForce 3 don’t working :frowning: . Tested today.

Best regards…