3.22 released

RouterOS General
1

RouterOS 3.22 has been released today.

What’s new in 3.22:

*) added advanced switch features for RB450G;
*) added support for MetaROUTER on RB450G;
*) added support for adding physical interfaces to Metarouters;
*) added set-bgp-prepend-path action to routing filters;
*) added WinBox OSPFv3 support to routing-test package;
*) added WinBox IPv6 routes support to routing-test package;
*) console - added ‘hide-sensitive’ option to the export command;
*) user manager - fixed customer remove interface bug;
*) fixed Cisco BGP VPLS autodiscovery in mpls-test package;
*) fixed LDP to not disconnect on unknown capabilities of remote
peer (should help establish LDP session with Junos);
*) fixed ethernet port name reordering on RB493;
*) bonding mode balance-alb now works on RB1xx, RB4xx, RB616, RB600, RB750,
RB1000;
*) added ‘/interface ethernet print stats’ command for RB450G and RB750;
*) fixed CSPF in routing-test to properly interpret link bandwidth;
*) added support for C-motech CNU-680 CDMA 1x EV-DO 450Mhz USB Modem;

What’s new in 3.21:

*) backported MetaROUTER support for RB4xx from v4;
*) added WinBox MPLS & VPLS support mpls-test package;
*) added WinBox BGP support to routing-test package;
*) api - added query support for ‘print’ command;
*) added support for bsd-syslog;
*) added TFTP server;
*) added authorization and TLS support to email tool;
*) added pppoe-scanner;
*) added tftp protocol support to fetch tool;
*) fixed ipsec policy priority to work as documented;
*) fixed BGP route selection in routing package;
*) allow to use IPsec aggressive mode with pre-shared keys;
*) fixed some problems in mesh protocol;
*) fixed https proxying with parent proxy;
*) fixed Prism shared IRQ issue;
*) fixed multiple MPLS/VPLS bugs in mpls-test;
*) fixed boot problems on some RB1000s;
*) added /interface mesh traceroute command;
*) fixed web proxy source address selection;
*) fixed pcq queue - pcq sometimes could get through more traffic
than specified in max-limit;

2

finally some changes, huh :wink:

3

i think i’ve oversleeped 3.21 and one time 3.22 this is the second ;p

4

both 3.21 and 3.22 are released together, you didn’t oversleep. mikrotik skipped a version this time

5

Edit: I’m misreading and failing /– see below.

6

both 3.21 and 3.22 are released together, you didn’t oversleep. mikrotik skipped a version this time

7

*) api - added query support for ‘print’ command;
*) added TFTP server;
*) added authorization and TLS support to email tool;

Amazing!, Thanks a lot!

*) added pppoe-scanner;

What it do? Intriguing…

*) fixed pcq queue - pcq sometimes could get through more traffic
than specified in max-limit;

Now thats a surprise! :slight_smile: Thank you.

Ozelo

8

Hi,


in 3.21 is *) added WinBox MPLS & VPLS support mpls-test package.

But i didn’t see in Winbox with Version 3.22. It’s again out in 3.22 ?


dingsingo

9

pppoe-scanner? what does it do and where could we find it ?

10 
/ interface pppoe-scanner

it searches for active pppoe-servers
i personally think better would be something like dhcp alert :slight_smile: maybe pppoe alert? :smiley:

11

When you add the packages for 3.22 to Dude so you can do a remote upgrade the version 3.22 doesn’t uppear under the Upgrade submenu. Any ideas ???

12

Where is changelog for new BIOS 2.20? http://www.routerboard.com/files/rb-2.20/CHANGELOG

13

*) fixed ethernet port name reordering on RB493;

what exactly does it do? will it mess up my configuration if i upgrade (e.g. what happens with the reordering)?

14

I was just wondering if those changes to the 450G mean that ports 2-5 can be used like a hardware switch now? I purchased one of these last week and was disappointed to find that this functionality was not supported even though it is supported in the 450 (non-G).

15

the new usermanager mikrotik was talking about with new features because it was said it will be included, is it included in this 3.22 ??

16

dprus: can’t you use any MT router as a switch ? simply make a bridge between the port witch you want to use as switch and done.


Got problems installing ROS-3.22 from an .iso - when it goes to creating partitions and formating them - kernel panics. Tryed it on various hardware (x86 like hw). Tryed out ROS-3.20 .iso - this one worked without problems.

17

I can second this - see the thread I created about it - http://forum.mikrotik.com/t/file-uploads-mikrotik-packages-not-recognised/27087/1

18

.npk files look a little different, most probably because of small changes to package format, that’s why you can’t access them through dude :slight_smile:

19

no

the opposite! it will fix the messup, if there is any

But i didn’t see in Winbox with Version 3.22. It’s again out in 3.22 ?

I don’t understand your post. Upgrade and see.

20

NetInstall over Demo and No License on VMware works, but fresh install freezes on ‘Harddrive found’, 100% CPU load, flashing with Caps Lock and Scroll Lock…