3G_Modem Configuring?

RouterOS General
1

Hi everybody,
I attached a 3G_Modem to my Mikrotik(951G 2Hnd) device and i run these Commands:

[admin@MikroTik] > /port print 
Flags: I - inactive 
 #   NAME                         CHANNELS USED-BY                      BAUD-RATE
 0   usb1                                3                              9600     
[admin@MikroTik] > system resource usb print 
 # DEVICE VENDOR                   NAME                   SPEED                  
 0 1:1                             RB400 EHCI             480 Mbps               
 1 1:5    Qualcomm, Incorporated   Qualcomm CDMA Techn... 480 Mbps               
[admin@MikroTik] >

My 3G_Modem was not listed in wiki pages, How can i configure it to connect to my ISP?

2

For starters, what is the modem name and model?

  1. Click Interfaces on the left side
  2. Click the blue plus icon, then PPP Client
  3. See images below.

3

Is there a good list anywhere or does anyone know of a reasonably efficient way of determining what the active ports are for a specific 3G modem, I have had to work with about 6 different 3G modems this week and trying to find the appropriate channel numbers for the modems has been a bit of a mission. I’m assuming that someone out there knows how to find these and that it is all not just guess and check but can’t be certain.

4

Not that I know of. Guess work seems to be the best.