411AR with XR2 bridge+ap?

RouterOS Wireless Networking
1

Hello I have two mikrotik 411AR with xr2 cards in both as well. So I have a 750g routing all my wired lan and I wanted to take a setp into wireless. I ordered two 411AR and XR2 cards to go in them as well so I could have a wireless solution for my entire house. I have succesfully used the MPLS bridgeing technique using the built in wireless card. Now I am trying to setup and AP using the XR2 card and I am having no luck. What I would like to have happen is the 10.10.10.0/24 network that my wired computers are on be the same network the wireless computers would connect to via a bridge back to the original 750g on ether1 of the 411AR. Could anyone tell me how to go about setting this up so Wlan3 can bridge through ether1 to get to the 750G.

Thanks.

2

Your description is not clear 100%.

What I would like to have happen is the 10.10.10.0/24 network that my wired computers are on be the same network the
wireless computers would connect to via a bridge back to the original 750g on ether1 of the 411AR. Could anyone tell me how
to go about setting this up so Wlan3 can bridge through ether1 to get to the 750G.

Just bridge Ethernet and Wireless (AP) interface on the router, which is connected to the wired router.