Use 951G-2HnD. Use snmp-monitoring to control incoming/outgoing bandwith. SNMP enable but no response from MikroTik. But, as you can see on the screenshot the snmp-packets reach router.
So, what the problem with 951G-2HnD?
Others (RB2011L-IN, …) are working perfect.
I’d same problem on 1100ahx2 ver 6.0 rc14. Nowdays I dont dare touch any MT with ver 6.
test 5.x version, i also see problem in route table list in snmp of 6.xx.
6.xx snmp still buggy.
Contact support with supout file attached.