6.37.1 Bug 2011UiAS-2HnD

RouterOS General
1

I’ve discovered a really annoying bug on my 2011UiAS-2HnD router board running 6.37.1

I’ve got got three separate dhcp servers / pools 192.168.1.1 on bridge and 192.168.3 & 192.168.1.4 setup on other interfaces.

Whenever I go to quickset, for example a new mac to acl, the action apply changes the interface applied to my address 192.168.1.4 and rewrites the dhcp pool name for 192.168.1.3 which is “192.168.1.3” to “dhcp” and changes the actual pool range data as well (I set 192.168.3.200 - 250) but after quickset the pool is set to 192.168.3.3-254

Also, the interface associated with the address 192.168.4.1 gets changed to the interface I have associated with 192.168.3.1 and thus causes the dhcp server to error for the pool assigned to that port.

2

General rule: If you change something by hand in any section except quickset, you never touch quickset again, since it will overwrite all your manual settings. Think of it as a initial setup wizard. It is not a bug, and you will have to live with that.

3

Your reply really isn’t helpful

If the feature is there, then it should work and work correctly, if it doesn’t then that is a “bug”.

4

You would not write this if you had more experience. Docmarius was fully right.