6 PPPoe Wan and 4 Lan

RouterOS Beginner Basics
1

I have 6 pppoe connections and I was able to configure all of them in RB2011il. The main goal is to combine some Pppoe connection and distribute it to multiple lans (4 LANS).
pppoe1 = 100mbps
pppoe2 = 100mbps
pppoe3 = 40mbps
pppoe4 = 40mbps
pppoe5 = 40mbps
pppoe6 = 40mbps


pppoe1 + pppoe 2 = 200mbps should go to Lan 1
PPPoe3 + pppoe 4 = 80 mbps should go to Lan 2
pppoe 5 = 40 mbps should go to Lan 3
pppoe 6 = 40 mbps should go to Lan 4


note: I am not using a separate modem, I am using MT builtin pppoe client


my problems are:

  1. I have internet connection, my Lan is not going to the right direction, eg. LAN 3 is not connectiong to pppoe 5
  2. PCC load balancing, i have read this article (http://aacable.wordpress.com/2011/06/04/mikrotik-4-wan-load-balance-pcc-complete-script-by-zaib/) but this shows 4 separate modems are connected to the MT router. I want to exclude the modems and use the builtin pppoe instead.

Any help would be appreciated. Thanks.

2

anyone?

3

You can make use of PCC. Just spread the connections over the six connections filtered by in-interface.