7.13.1 -> New CAPsMAN and 2Ghz Radio

RouterOS Wireless Networking
1

Hello
I have detected that with this new version of Mikrotik and using the new CAPsMAN with the new driver in the CAPs, I have a problem when using different channels for each CAP in 2Ghz and it always forces me to use Channel 1 instead of 6.
Do you know if this problem has been reported?

/interface wifi channel
add band=2ghz-n disabled=no frequency=2437 name=2ghz-ch06 width=20mhz
add band=2ghz-n disabled=no frequency=2462 name=2ghz-ch11 width=20mhz
add band=5ghz-ac disabled=no frequency=5260 name=5ghz-ch52 width=20/40/80mhz
add band=5ghz-ac disabled=no frequency=5500 name=5ghz-ch100 width=20/40/80mhz
add band=2ghz-n disabled=no frequency=2412 name=2ghz-ch01 width=20mhz
add band=5ghz-ac disabled=no frequency=5180 name=5ghz-ch36 width=20/40/80mhz

1704904365910.png

2

Hi Cascuda
I also had the problem and have already reported to support. They also responded and requested the supout.rif files from CAPsMAN and AP.

3

Then we have to wait for this problem to be resolved in future versions. Thanks for answering
If support needs those logs, request them and I will send them.

4

Small update. Since version 7.13.2 I have no longer been able to observe the behavior and the correct channel is always set.