802.1q Trunk extension over Wireless

RouterOS Wireless Networking
1

Hello,

In this forum there exist two other topic with this problem, but I think was better to do this new topic trying to join all the problematic.

The other posts are:
http://forum.mikrotik.com/t/vlan-trunk-over-p2mp-wireless/44129/1
http://forum.mikrotik.com/t/vlans-through-ptmp-link/50617/1

In this link - http://wiki.mikrotik.com/wiki/802.1q_Trunk_extension_over_Wireless_P2P_Link - you can see all a solution to pass a VLAN Trunk over Wireless. But they use one WDS Wireless link per VLAN, so they have 3 VLAN’s and they create 3 WDS Links and 3 VAP’s.


I’m questioning is:
Is possible to have de 3 VLAN’s passing in the same WDS link?

So I’m facing the same problem as describe in other posts wear, different VLAN’s but the same scenario.
VAP1: VLAN 101 → Station A
VAP1: VLAN 102-> Station A
VAP2: VLAN 202 → Station B

I Have put 1 VLAN in a WDS link with no problems…
But is someone able to put 2 VLAN’s in the same WDS link. I also need two VLANs over one WDS link using the same VAP.

Can someone help me with advises, opinions, something…

Thanks in advanced.
Regards,
Craig Davids

2

Maybe this will help you, http://forum.mikrotik.com/t/mikrotik-p-to-p-configuration/52487/1

3

Just try to add /interface vlan on the wds interface on both sides - and bridge them with your vlans from ethernet :slight_smile:.

4

why dont u just bridge the eth0 interface with wds link? And on the other side u tag the wanted vlan?
Looks more easy!

5

if you know ethernet , maybe this help - Bridge in mikrotik its just a HUB (sending all to all)