hi im a bit new in the mikrotik world although i have used it before but very basic( assigning ip’s, mac addresses, bandwidth speeds, etc). I have a routerboard 564 connected at tower 1 and a routerboard 500 at tower 2. Presently i have a separate backhaul link with my internet feed to tower 1. How can i configure the RB564 to send a link from my internet feed at tower 1 to tower 2 and also be able to act as an AP at tower 1 and same at tower 2? … If this is a bit too vague, please get back to me and i will be most glad to elaborate as much as i can.
Presently i have a separate backhaul link with my internet feed to tower 1.
Hi Vik ;
i will try to help you as i could , just i need to know what is the Backhaul link ?
How can i configure the RB564 to send a link from my internet feed at tower 1 to tower 2 and also be able to act as an AP at tower 1 and same at tower 2?
here i need to ask you if you want to have the same ssid on the two towers , so if you are near tower 1 you are going to read your ssid and when you be near tower2 you will read the same ssid .
give us further information .
with best regards .