Accidentally disabled Interface via Webfig

RouterOS Beginner Basics
1

Hi everyone,

I recently bought a Hex3 and successfully reconfigured it. But i was navigating the Webfig interface and tried some things. I click the disabled button under the interfaces thinking it would only disable that certain interface but somehow something went wrong and i cannot access the router anymore. it doesn’t give me an IP when i connect to it. I already configured the DHCP server which should give me an IP in the range of 192.168.0.1/24.

I have a backup of the config and i could reset it but that’s the last resort. Thank you in advance!

2

Use other interface and connect via mac address. If no interface is running, reset the device.

3

jarda is absolutely right. May be worth looking at using safe mode when on config screens as well to mitigate doing this again!