Advice on IP addresses - wireless and video

RouterOS Wireless Networking
1

Hi I’m thinking a wireless network for connecting 3 IP video cameras somenting like this:

RB433 (ap bridge) → server storage
RB411 (station) → Camera1
RB411 (station) → Camera2
RB411 (station) → Camera3

I’m trying to configure the 3 RB411 like this:
storage server: 10.10.1.1
RB433 bridge1 (ether1 and wlan1) 10.10.1.10
RB411 bridge1 (ether1 and wlan1) 10.10.1.38
RB411 bridge1 (ether1 and wlan1) 10.10.1.39
RB411 bridge1 (ether1 and wlan1) 10.10.1.40

To use the video software I need that video cameras are on the same network with storage server without using NAT between wlans and ethernet on RB411, so I have not yet find a working solution,
some ideas?

Cetalfio

2

Why are you using NAT? There’s no need to. Just make a flat bridged network. Make sure that on the AP and stations, that you create a bridge and have both the ethernet and wireless interfaces added to them.

Your AP should be set to ‘AP bridge’, and your WDS set to the name of your bridge interface, and WDS set to dynamic. The stations should all be set to ‘station WDS’.

3

Yes, thats the right solution, try it.
Im working with that conf.