All SFP+ traffic is routed across 1Gb ethernet

RouterOS Beginner Basics
1

CRS305-1G-4S+IN
RouterOS 6.47

3 Servers w/ QLE8152 cards, all using DAC cables.

Any time two SFP+ connected hosts try to send data to each other, according to the “Interfaces” screen, the traffic flows through the ether1 port and is limited to 1Gbps. Traffic should be at 10Gbps between hosts. I will be happy to provide any diagnostic anyone needs to help (I’m not sure what would be useful, so I won’t flood this post with junk). I would very much appreciate some assistance.

Thank you in advance!!!

2

Are the servers on the same or on different subnets?

3

Check your routes on that device ( /ip route print ).

Best is to issue the following command, and then download the file (export-hs.rsc) and post its content:
/export file=export-hs hide-sensitive

4

I seem to be having the same issue. However, I unplugged the ETH/Boot link and the issue is still thede.